Manuale d’uso / di manutenzione del prodotto LM-3000 del fabbricante Mustek
Vai alla pagina of 12
LM-3000 LCD MONITOR USER’S MANUAL.
SOME IMPORTANT NOTES FCC NOTICE This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications.
LM-3000 USER’S MANUAL - page 1 I. OVERVIEW LM-3000 is a highly luminant with low shadow effect 12.1” LCD monitor. It is economical of pace and provides broad display area almost compatible to that of a 14” CRT monitor for PC application.
LM-3000 USER’S MANUAL - page 2 IV. DISPL AY ADAPTOR CARD INS TALL ATION The attached PST032 is a PCI bus SVGA adaptor card which offers a 50 pin SCSI type connector for LM-3000 ( Do not connect any device other than the LM-3000 LCD monitor to this port even if it was using a SCSI connector! ) and a 3 x 5 D sub connector for external SVGA monitor.
LM-3000 USER’S MANUAL - page 3 V. CABLE CONNECTION Attention : Never connect the cable while power on! The cable length is 1.5 M, that allows the user to arrange the LM- 3000 at any place within this range from the PC.
LM-3000 USER’S MANUAL - page 4 VI. UTILITY INS TALL ATION A. For Windows 3.1 The drivers for Windows 3.1 are delivered in a separate 3.5” floppy diskette with the LCD monitor. To install the drivers for Windows 3.1 with the LCD monitor, the user should make sure that the Windows 3.
LM-3000 USER’S MANUAL - page 5 start with CHIPS followed by either the number 65550 or 6555X then followed by the matrix of resolution and colors. 17. Select Restart Windows to make the selected driver effective. B. For Windows 95 The following describes normal display driver installation procedures for Windows 95.
LM-3000 USER’S MANUAL - page 6 C. For Windows NT 3.5x The drivers for Windows NT of versions 3.5x are stored in a subdirectory named NT35 in the diskette. 1. Run Windows NT Setup from Main Group 2. Choose O ption from the menu (Alt-O) 3. Select C hange system setting (Alt-C) 4.
LM-3000 USER’S MANUAL - page 7 Step 3: Upon restart, select the desired display settings from the Display property dialog box. Click on Test to test the newly selected graphics mode. A color test screen should appear, followed by the Testing Mode window.
LM-3000 USER’S MANUAL - page 8 Swivel Tilt Contrast control knob Brightness control knob.
LM-3000 USER’S MANUAL - page 9 VIII. SPECIFIC ATION MODEL: LM-3000 Panel: 12.1 ” DSTN COLOR Max. Resolution: SVGA 800 x 600 Effective Display Area: 247.02 (W) x 185 .76 (H) mm Response Time: 250 ms Backlight: SIDE-EDGE TYPE CFL x 2 TUBES Polarizer: NON-GLARE TREATMENT Dot Size: 0.
LM-3000 USER’S MANUAL - page 10 DISCLAIMER The manufacturer of the LCD display system makes no representations or warranties, either expressed or implied, by or with respect to anything in this manual, and shall not be liable for any implied warranties of fitness for a particular purpose or for any indirect, special or consequential damages.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Mustek LM-3000 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Mustek LM-3000 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Mustek LM-3000 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Mustek LM-3000 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Mustek LM-3000, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Mustek LM-3000.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Mustek LM-3000. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Mustek LM-3000 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.