Manuale d’uso / di manutenzione del prodotto SG1400C3-55748 del fabbricante Multiquip
Vai alla pagina of 116
THIS MANU AL MUST A CCOMP ANY THE EQ UIPMENT A T ALL TIMES. T o find the latest re vision of this publication, visit our website at: www .mqpo wer .com ® MODEL SG1400C3-55748 3-POSITION SWITCH/P ARA.
P A GE 2 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) PROPOSITION 65 W ARNING Diesel engine exhaust and some of.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 3 If you believe that your vehicle has a defect that could cause a crash or could cause injury or death, you should immediately inform the National Highway T raffic Safety Administration (NHTSA) in addition to notifying Multiquip at 1-800-421-1244.
P A GE 4 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) T ABLE OF CONTENTS S G 1 4 0 0 C 3 S t u d i o G e n e r a t o r Proposition 65 Warning ........................................... 2 Repor ting Saf ety Def ects .
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 5 www .multiquip .com Or dering par ts has never been easier! Choose fr om three easy options: WE A CCE.
P A GE 6 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) SAFETY INFORMA TION Do not oper ate or service the equip ment bef ore reading the entire manual. Safety precautions should be follo wed at all times when operating this equipment.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 7 SAFETY INFORMA TION GENERAL SAFETY CA UTION NEV ER oper at e this equi pm ent with ou t prop er p.
P A GE 8 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) SAFETY INFORMA TION ENGINE SAFETY D ANGER Th e engi ne fue l ex ha us t gase s conta in poi so no us car bon mono xide. This gas is color less and odor less , and can cause death if inhaled.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 9 SAFETY INFORMA TION FUEL SAFETY D ANGER DO NO T start the engine near spille d fuel or comb ust ib le fl uids . Diesel fuel is extremely fl ammable and its vapors can cause an e xplosion if ignited.
P A GE 10 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) SAFETY INFORMA TION ELECTRICAL SAFETY D ANGER DO NO T to u ch ou tpu t term i n al s dur i ng op er a t i o n .
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 11 SAFETY INFORMA TION B A TTER Y SAFETY D ANGER DO NO T drop the batter y . There is a possibility that the batter y will e xplode. DO NO T e xp ose the batt ery to open fl a mes , spa rks, cigar ett es , etc.
P A GE 12 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) SPECIFICA TIONS T able 1. Generator Specifications Model SG1400C3 T ype Rev olving field, self ven.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 13 DIMENSIONS E F H G I D J TOP VIEW A B FRONT VIEW K L SIDE VIEW AC VOLTS AC AMPERES AC AMPERES M AC AMPERES HERTZ C T able 4. Dimensions Reference Letter Dimensions in.
P A GE 14 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) INST ALLA TION GROUND ROD FOR EARTH GROUND GROUND CABLE GENERA TOR GROUND LUG CONNECT TO BUILDING GROUND 8 FT . MINIMUM REFERENCE NEC 250-52(C) NOTE: GROUND LUG MUST BE INST ALLED BY USER.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 15 INST ALLA TION OUTDOOR INST ALLA TION Install the generator in a area that is free of debris, bystanders , and ov erhead obstructions. Make sure the generator is on secure le vel ground so that it cannot slide or shift around.
P A GE 16 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) GENERAL INFORMA TION Generator The MQ P ower Model SG1400C3 is a 200kV A studio generator that is designed as a high quality po wer source f or enter tainment and studio applications.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 17 GENERAL INFORMA TION Fuel T ank This generator can be equipped with a 150 gallon (567 liters) fuel tank located beneath the trailer deck. The tank is made of steel (baffled).
P A GE 18 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) GENERAL INFORMA TION InteliVision 5 ™ Digital Controller The InteliVision 5 Digital Controller provides monitoring and fault detection capability of all engine and generator operating parameters .
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 19 NOTES.
P A GE 20 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) 18 19 20 21 22 28 29 23 24 25 26 27 24 2 10 1 1 15 30 31 32 33 34 Inside Housing 17 4 6 3 1 5 7 14 16 8 9 12 13 GENERA TOR MAJOR COMPONENTS Figure 3.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 21 18 19 20 21 22 28 29 23 24 25 26 27 24 2 10 1 1 15 30 31 32 33 34 Inside Housing 17 4 6 3 1 5 7 14 16 8 9 12 13 GENERA TOR MAJOR COMPONENTS Figure 3. Major Components T able 5.
P A GE 22 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) BASIC ENGINE COMPONENTS Figure 4. Basic Engine Components T able 6.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 23 BASIC TRAILER COMPONENTS The definitions below describe the controls and functions of the T railer (Figure 6). 1. Pintle Eye Coupler — Adjustab le 3-inch e y e coupler rated at 20,000 lbs.
P A GE 24 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) CONTROL P ANEL The definitions below describe the controls and functions of the Control P anel (Figure 6).
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 25 CAMLOK/VOL T AGE OUTPUT P ANEL The definitions below describe the controls and functions of the Camlok/V oltage Output P anel (Figure 7).
P A GE 26 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) Electronic Trip Unit Instantaneous Trip Setting - Amps Push to Trip Test Status A — 500 B — 600 C — 800 D — 1000 E — 1250 F — 1500 G — 2000 H — 2500 E D C B A H G F 450 AMP LONG — INST.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 27 DIGIT AL CONTROLLER Ref er to Figure 9 f or location of controls and indicators. 1. ST A TUS LED — Indicates status of the controller . Lights green when the controller is running.
P A GE 28 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) LOAD APPLICA TION/GENERA TOR OUTPUT SINGLE PHASE LO AD Alwa ys be sure to check the nameplate on the.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 29 GENERA TOR OUTPUTS GENERA TOR OUTPUT V OL T A GES A wide range of voltages are av ailable to supply volt age for many diff erent applications. V oltages are selected by using the v oltage selector s witch (Figure 10).
P A GE 30 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) INSPECTION/SETUP MAIN CIRCUIT BREAKER The generator is equipped with a 3-pole, 600-amp circuit breaker to protect the camlok receptacles from ov erload.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 31 INSPECTION/SETUP 1. Place the generator lev el with the ground. F ailure to do so will cause fuel to spill from the tank bef ore reaching full capacity (Figure 12).
P A GE 32 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) INSPECTION/SETUP COOLANT (ANTIFREEZE/SUMMER COOLANT) Cu mm i n s re co m me nd s a nti fr e e z e / .
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 33 INSPECTION/SETUP B A TTER Y This unit is of negat iv e ground. DO NO T connec t in re v erse . Alwa ys maintain batter y fluid lev el between the specified marks.
P A GE 34 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) ST AR TUP BEFORE ST ARTING 1. Place the Control P ower switch (Figure 18) on the digital control panel in the up position (ON). Figure 18. Control P ower Switch (ON) 2.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 35 ST AR TUP 6. If unit is to be used in parallel with another unit, interconnect the units. Interconnect the output buses with suitable po wer cables to carr y full load capacity .
P A GE 36 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) 9. If paralleling to another unit and the bus was already energized from another unit (BUS HO T light already on), pressing to close GCB b utton once would initiate a synchronizing mode.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 37 PROTECTIVE DEVICES PRO TECTIVE DEVICES Protection de vices and emergency stop devices are designed as standard components for protection of the generator against troub le dur ing operation.
P A GE 38 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) MAINTENANCE Use T able 14 as a general maintenance guideline when ser vicing your engine. For more detail engine maintenance inf ormation, refer to the engine owner’ s manual supplied with your engine.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 39 If the engine is operating in very dusty or dry grass condit ions , a clogged air cleaner will result. This can lead to a los s of pow er , ex ces siv e carb on bui ld up in the comb ustion chamber and high fuel consumption.
P A GE 40 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) FUEL T ANK INSPECTION In addition to cleaning the fuel tank, the following components should be inspected f or wear: Rubber Suspension — look for signs of w ear or def ormity due to contact with oil.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 41 The f ollowing tr ailer maintenance guidelines are intended to assist the operator in pre v entiv e maintenance. TRAILER BRAKES Properly functioning brak e shoes and drums are essential to ensure saf ety .
P A GE 42 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) P er iodically chec k the actuator mounting fasteners f or damage or loosening. Inspect the actuator for worn or damaged par ts. As you are towing your trailer , be aware of any changes in braking quality .
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 43 MAINTENANCE After remo ving the dust cap , cotter pin, spindle nut and spindle washer , remo ve the hub to inspect the bear ings f or wear and damage .
P A GE 44 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) TROUBLESHOOTING (GENERA TOR) T roubleshooting (Generator) Symptom P ossible Pr oblem Solution No V oltage Output AC V oltmeter defectiv e? Chec k output voltage using a v oltmeter.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 45 TROUBLESHOOTING (ENGINE) T roubleshooting (Engine) Symptom P ossible Pr oblem Solution Engine will not star t or start is delayed, although engine can be turned over .
P A GE 46 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) TROUBLESHOOTING (CONTROLLER) T roubleshooting (Intelivision 5 Contr oller) Symptom P ossible Problem Solution Wrong Displa y HW SW and HW mismatch? Correct firmware has to be programmed.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 47 TRAILER GUIDELINES The fol lo win g guide lin es are intende d to assis t the operat or in the operation and handling of a trailer . Saf ety precautions should be follow ed at all times when operating a trailer .
P A GE 48 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) DRIVING CONDITIONS Whe n towi ng a tra il er , you wil l ha v e decre as ed acce le ra ti on, increa.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 49 INOPERABLE BRAKES, LIGHTS OR MIRRORS Be sure that the br akes and all of the lights on y our trailer are functioning properly before towing your trailer .
P A GE 50 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) Figure B. VIN T ag Location The trailer VIN T ag contains the following cr itical saf ety inf ormation for the use of y our trailer . GA WR : The max im um gr os s we i gh t th at an axl e ca ns up p ort.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 51 E M E R G E N C Y F L A R E S A N D T R I A N G L E R E F L E C T O R S It is wise to carr y these warning devices ev en if you are not towing a trailer .
P A GE 52 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) or is wor n, the tr ailer can come loose from the tow v ehicle and ma y cause death or serious injur y .
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 53 If the coupler cannot be secured to the hitch ball, do not tow the trailer .
P A GE 54 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) Connecting T railer Lights Connect the trailer lights to the tow vehicle’ s electrical system using the electr ic connectors at the front of the trailer (tongue).
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 55 the ball andco upl er syst em. All bent or brok en couple r parts must be replaced bef ore to wing the trailer .
P A GE 56 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) TIRE SAFETY Unsafe Tires, Lug Nuts or Wheels T railer tires and wheels are more lik ely to f ail than car tires and wheels because the y carry a hea vier load.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 57 There is a vehicle placard (Figure I) located in the same location as the cer tifi cation label described abov e. This placard pro vides tire and loading information.
P A GE 58 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) Use the inf or mation contained in this section to make tire saf ety a regular par t of your vehicle maintenance routine.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 59 Uniform Tire Quality Grading Standards (UTQGS) T readwear Number : This number indicates the tire’s wear rate. The higher the treadwear number is, the longer it should tak e f or the tread to wear down.
P A GE 60 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) T able B below will help pinpoint the causes and solutions of tire wear prob lems. Wheel Rims If the trailer has been str uc k, or impacted, on or near the whe els , or if the tra ile r has struc k a curb , inspe ct the rims f or damag e (i.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 61 Lights and Signals Bef ore each tow , chec k the trailer taillights, stoplights, tur n signals and any clearance lights f or proper operation. T able C.
P A GE 62 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) HYDRAULIC HOSES SCHEMA TIC.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 63 MAINTENANCE P AR TS LOCA TOR L K1 K L1 P1 J1 I H D G C B M M1 N1 X Z B1 D1 Z1 Y1 P2 S S2 T2 U2 R1 Q2.
P A GE 64 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) GENERA TOR WIRING DIAGRAM X S GRY/RED 239 237 238 221 234 235 236 233 229 232 231 230 225 226 227 22.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 65 GENERA TOR WIRING DIAGRAM A3 C3 D3 B3 H2 W2 V2 X2 Y2 P2 T2 S2 K2 J2 I 2 H2 G2 R 606 637 639 638 PNK/.
P A GE 66 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) EXPLANA TION OF CODES IN REMARKS COLUMN The follo wing section explains the different symbols and remarks used in the P ar ts section of this manual. Use the help numbe rs fou nd on the back page of the manual if there are any questions .
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 67 SUGGESTED SP ARE P AR TS SG1400C3 WITH CUMMINS QSB7-G5 DIESEL ENGINE 1 to 3 units Qty . P/N Description 3............3937736 ................ CAR TRIDGE, LUB OIL FIL TER 3.
P A GE 68 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) HOUSING (BASE) ASSY . 2 3 4 5 1 6 10 7 9 8.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 69 HOUSING (BASE) ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1 EE55742 HOUSING, 1400 STUDIO , SINGLE BUS DOOR 1 2 EE40474 BASE, 1400A STUDIO , 48" X 100" 1 3 INSULA TION .
P A GE 70 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) HOUSING (INTERIOR) ASSY . 32 29 FRONT VIEW REAR VIE W 25 7 8 24 23 9 39 39 34 30 16 17 6 3 5 18 42 1.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 71 HOUSING (INTERIOR) ASSY . NO . P ART NO . P ART NAME QTY .
P A GE 72 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) CAMLOK ASSY . 39 37 10A 26A 10 14A 21 38 1 1 1 1 28 26 18 17 19 FRONT 16 7 30 27 20 14 15 12 31 29 9.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 73 CAMLOK ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1 EE55746 P ANEL, OUTPUT BUS, CAMLOK 1 2 EE63.
P A GE 74 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) CONTROL BOX ASSY . (P ANEL) 14 1 6 9 15 9 14A 12 13 1 1 2 7 3 3A 16 8 4 10 5.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 75 CONTROL BOX ASSY . (P ANEL) NO . P ART NO . P ART NAME QTY . REMARKS 1 EE55750 P ANEL, INSTR, INTELIVISION 5 1 2 EE6523 HINGE, CONTR OL PNL MTG. 1 3 EE55753 INTELIVISION 5.
P A GE 76 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) CONTROL BOX ASSY . (INTERIOR) 24 15 4 23 15A 1 17 8 15 9B 10B 18 16 13 12 2 20 21 22 9A 6 19 5 1 1 1.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 77 CONTROL BOX ASSY . (INTERIOR) NO . P ART NO . P ART NAME QTY .
P A GE 78 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) ENGINE/GENERA TOR MOUNTING ASSY . W A TER DRAIN OIL DRAIN FUEL IN FUEL OUT 5 17 15 26 19 18 27 20 20.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 79 ENGINE/GENERA TOR MOUNTING ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1 EE15831 AL TERNA T OR, MARA THON, 431RSL4007 1 2 9518500 DRIVE DISC ASSY SAE #11.
P A GE 80 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) RADIA TOR/MUFFLER SUPPOR T 24 25 19 20 17 20 17 17 7 13 15 18 15 15 14 17 23 21 15 15 17 15 13 14 9 .
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 81 RADIA TOR/MUFFLER SUPPOR T NO . P ART NO . P ART NAME QTY . REMARKS 1 EE41013 SUPPOR T , RADIA T OR 1 2 EE25484 CO VER, F AN, STEEL 1 3 EE41023 ASSY , ARC BAFFEL W/ INSULA TION 1 4 EE41698 VENTURI RING, 30" REVERSE CONSTR.
P A GE 82 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) RADIA TOR/F AN ASSY . 24 28 24 23 24 21 1 4 16 24 27 32 26 3 20 18 19 25 31 24 29 22 15 13 14 10 17 .
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 83 RADIA TOR/F AN ASSY . NO . P ART NO . P ART NAME QTY .
P A GE 84 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) RADIA TOR PIPING 23 18 16 6 17 7 22 1 1 26 3 10 8 13 14 24 25 1 1 9 1 1 19 1 4 20 21 15 12 24 5.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 85 RADIA TOR PIPING NO . P ART NO . P ART NAME QTY . REMARKS 1 EE54732 UPPER W A TER LINE 1 2 EE54733 L.
P A GE 86 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) AIR FIL TER HOSING/PIPING.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 87 AIR FIL TER HOSING/PIPING NO . P ART NO . P ART NAME QTY . REMARKS 1 EE41139 AIR FIL TER, 13" DONALDSON 1 2 P537876 ELEMENT , AIR CLEANER 1 3 EE24247 BAND , MET AL A/C MNTG 13" 2 4 EE32335 HUMP HOSE, STR.
P A GE 88 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) EXHAUST ASSY . 7 10 9 12 1 6 8 4 5 1 1 3 10 2.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 89 EXHAUST ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1 EE55763 MOUNTING BAND , 16" ROUND 2 2.
P A GE 90 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) SADDLE BOX ASSY ..
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 91 SADDLE BOX ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1 B-528258 REGULA T OR, VOL T AGE, D VR2000E 1 2 A-66377-45 CAP A CIT OR, 7.
P A GE 92 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) ENGINE ST AR TER, RELA Y AND BA TTER Y ASSY . 29 17 28 29 43 42 41 9 39 16 19 13 30 32 27 40 38 34 3.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 93 ENGINE ST AR TER, RELA Y AND BA TTER Y ASSY . NO . P ART NO .
P A GE 94 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) FUEL SYSTEM ASSY . A TO ENGINE BLOCK TO ENGINE BLOCK A B B W A TER/FUEL SEP ARA TOR FUEL PRIMING PUM.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 95 FUEL SYSTEM ASSY . NO . P ART NO . P ART NAME QTY .
P A GE 96 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) FUEL SYSTEM ASSY . A TO ENGINE BLOCK TO ENGINE BLOCK A B B W A TER/FUEL SEP ARA TOR FUEL PRIMING PUM.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 97 FUEL SYSTEM ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 40 EE49411 NIPPLE, 1/2NPT X 4" STEEL BLA CK 1 41 5502-8 ELBO W , 90° 1 42 EE55857 V AL VE, CHECK, BALL , 1/2NPT FEM, SS 1 43 5404-8-8 NIPPLE, PIPE, HX.
P A GE 98 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) HYD. VENT ACTUA TOR HOSING ASSY . B A A B A C C D FRONT ACTUA TOR REAR ACTUA TOR 3-W A Y V AL VE MAN.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 99 HYD. VENT ACTUA TOR HOSING ASSY . NO . P ART NO . P ART NAME QTY .
P A GE 100 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) ENGINE COMPONENT ASSY . 18 24 23 20 17 19 13 1 1 6 7 10 8 5 9 1 7 A 14 1 4 A 15 15 1 5 A 1 5 A 1 6 .
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 101 ENGINE COMPONENT ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1 4989106 FIL TER, FUEL 1 2 3974823 THERMOST A T W/ SEAL ............................
P A GE 102 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) HYD. MANIFOLD, V AL VE AND HOSE ASSY . E G F E MANIFOLD INT AKE BALL V AL VE 3-W A Y V AL VE G F 13.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 103 NO . P ART NO . P ART NAME QTY . REMARKS 1 EE47423 MANIFOLD , HYD . A CTU A TORS , 150 PSI 1 2 EE41126 TEST FITTING, PRESSURE GA UGE 1 3 EE41837 CONN, DIN, PROPOR TIONAL, SOLENOID 1 4 EE47425 BRA CKET , HYD .
P A GE 104 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) HYD. T ANK, FIL TER AND HOSE ASSY ..
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 105 HYD. T ANK, FIL TER AND HOSE ASSY . NO . P ART NO .
P A GE 106 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) HYD. T ANK, FIL TER AND HOSE ASSY ..
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 107 NO . P ART NO . P ART NAME QTY . REMARKS 26 EE42719 SP ACER, 1/2"OD x 1/4"ID x 3/4" .
P A GE 108 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) HYD. PUMP , COOLER, F AN MOTOR AND HOSE ASSY . OIL COOLER F AN MOTOR HYDRAULIC PUMP B G F D C A E NOTE: Hose Ends A , B , C , D , E , F and G are also shown on HYD.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 109 HYD. PUMP , COOLER, F AN MOTOR AND HOSE ASSY . NO .
P A GE 110 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) CRANKCASE VENTILA TION ASSY . 1 5 4 4 6 6 7 7 8 8 3 3 A 2 9 1 0 1 3 1 2 1 3 1 4 1 5 1 7 1 6 1 8 1 9.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 111 CRANKCASE VENTILA TION ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1 EE56220 ASSY . CRANKCASE VENT FIL TER, CV6001 1 2 CCV552393 CANISTER, CRANKCASE ASSY .
P A GE 112 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) TRAILER ASSY . 4 3 1 2 3 5 6 7 8 3 4 3 2 1 3 1 1 1 2 1 7 2 0 1 4 1 6 1 8 1 9 2 1 2 2 3 0 2 3 1 6 1 .
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 113 NO . P ART NO . P ART NAME QTY . REMARKS 1 EE36264 PINTLE, EYE, RING 3" 1 2 EE42617 CAP SCREW , HX. HD . GRD 8 2 3 EE35394 W ASHER, FLA T ZINC PL T .
P A GE 114 — SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) TERMS AND CONDITIONS OF SALE — P AR TS P A YME NT TERMS T er ms of payment for part s are net 30 days. FREIG HT POLICY Al l pa r ts o rd er s wi ll b e sh ip pe d c ol lec t o r prepaid with the charges added to the invoice.
SG1400C3 STUDIO GENERA T OR • OPERA TION AND P ARTS MANU AL — REV . #1 (02/15/12) — P A GE 115 NOTES.
OPERA TION AND P ARTS MANUAL Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING United St a teS Multiquip Corporate Office MQ P arts Depar tment 18910 Wilmington A ve . Carson, CA 90746 Contact: mq@multiquip .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Multiquip SG1400C3-55748 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Multiquip SG1400C3-55748 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Multiquip SG1400C3-55748 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Multiquip SG1400C3-55748 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Multiquip SG1400C3-55748, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Multiquip SG1400C3-55748.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Multiquip SG1400C3-55748. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Multiquip SG1400C3-55748 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
