Manuale d’uso / di manutenzione del prodotto DCA-500SSK del fabbricante Multiquip
Vai alla pagina of 114
© COPYRIGHT 2001, MUL TIQUIP INC . P AR TS AND OPERA TION MANUAL Re vision #1 (06/04/01) MUL TIQUIP INC. P ARTS DEP AR TMENT : 18910 WILMINGTON AVE. 800-427-1244 CARSON, CALIFORNIA 90746 F AX : 800-672-7877 310-537-3700 SERVICE DEP AR TMENT : 800-421-1244 800-835-2551 F AX: 310-537-3927 F AX: 310-638-8046 E-mail:mq@multiquip.
P A GE 2 — DCA-500SSK — P AR TS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01).
DCA-500SSK — PARTS AND OPERATION MANUAL (STD)— REV. #1 (04/14/01) — PAGE 3 HERE'S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING P P P P P AR AR AR AR AR TS D.
P A GE 4 — DCA-500SSK — P AR TS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) T ABLE OF CONTENTS Here's How T o Get Help ............................................ 3 T able Of Contents ................................................
DCA-500SSK — PARTS AND OPERATION MANUAL (STD)— REV. #1 (04/14/01) — PAGE 5 P AR TS ORDERING PR OCEDURES Get special freight allowances when you order 10 or more line items via F AX!** ■ UPS Gr.
P A GE 6 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) R ULES FOR SAFE OPERA TION ■ NEVER touch the hot exhaust manif old, muffler or cylinder . A l l o w these parts to cool before servicing engine or generator . ■ The engine of this generator requires an adequate free flow of cooling air .
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 7 R ULES FOR SAFE OPERA TION CA UTION: CA UTION: ■ Backfeed to a utility system can cause electrocution and/or property damage. Do not connect to any building's electrical system except through an approved device or after building main switch is opened.
P A GE 8 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) ■ NEVER Run engine without air filter . Sev ere engine damage ma y occur . ■ Always service air cleaner frequently to prevent carburetor malfunction. ■ Always disconnect the battery before performing service on the generator .
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 9 T ranspor ting ■ Always shutdown engine before transporting. ■ Tighten fuel tank cap securely . ■ Drain fuel when transporting generator over long distances or bad roads.
P A GE 10 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) T o reduce the possibility of an accident while transpor ting the generator on public roads, always make sure the trailer (Figure 1) that suppor ts the gener ator and the towing v ehicle are in good operating condition and both units are mechanically sound.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 11 Explanation of Chart: This section is intended to provide the user with trailer ser- vice and maintenance inf or mation. The ser vice and mainte- nance guidelines referenced in this section apply a wide range of trailers.
P A GE 12 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) s n o i t a c i f i c e p S . 1 e l b a T L E D O M N O I T A C I L P P A L E U F L L E C E K A R B M E T S Y S.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 13 ) t ' n o C ( s n o i t a c i f i c e p S . 1 e l b a T L E D O M R E L P U O C S E R I T S L E E H W E L X A S B U H N O I S N E P S U S L A C I R T C E L E W 0 1 - R L R T S S A L C L L A B " 2 E L B A T S U J D A 2 C 3 1 - 5 7 1" 0 5 .
P A GE 14 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — TRAILER SAFETY GUIDELINES Brakes If your trailer has a braking system, the brakes should be inspected the first 200 miles of operation. This will allow the brak e shoes and drums to seat proper ly .
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 15 DCA-500SSK — TRAILER SAFETY GUIDELINES Hydraulic/Air/Surge Brakes Hydraulic brakes (Figure 3) should not require any special attention with the exception of routine maintenance such as shoe and lining replacement.
P A GE 16 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) Tires/Wheels/Lug Nuts Tires and wheels are a v er y impor tant and cr itical components of the trailer . When specifying or replacing the trailer wheels it is impor tant the wheels, tires , and axle are properly matched.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 17 s t n e m e r i u q e R e u q r o T n o i s n e p s u S . 3 e l b a T m e t I ) .
P A GE 18 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — TRAILER-WIRING DIA GRAM.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 19 g n i t o o h s e l b u o r T e k a r B r i A . 6 e l b a T m o t p m y S e s u a C e l b i s s o P n o i t u l o S s e k a r B o N? d e k n i k r o n e k o r b e n i l e k a r B.
P A GE 20 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) Machine Safety Decals The DCA-500SSK generator is equipped with a number of saf ety decals . These decals are provided f or operator saf ety and maintenance inf ormation.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 21 DCA-500SSK — OPERA TION AND SAFETY DECALS.
P A GE 22 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — OPERA TION AND SAFETY DECALS.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 23 DCA-500SSK — OPERA TION AND SAFETY DECALS.
P A GE 24 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — OPERA TION AND SAFETY DECALS.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 25 DCA-500SSK -- NO TES P A GE.
P A GE 26 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — SPECIFICA TIONS s n o i t a c i f i c e p S . 7 e l b a T s n o i t a c i f i c e p S r o t a r .
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 27 DCA-500SSK — GENERAL INFORMA TION DCA-500SSK F AMILIARIZA TION Generator The MQ P ow er Model DCA-500SSK is a 550 k.
P A GE 28 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — MAJOR COMPONENTS Figure 6. Major Components.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 29 NO TE P A GE.
P A GE 30 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — DIMENSIONS (T OP AND SIDE) Figure 7a. Dimensions.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 31 Figure 7b. Dimensions DCA-500SSK — DIMENSIONS (FRONT AND REAR).
P A GE 32 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — CONTR OL P ANEL Figure 8. Control Panel.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 33 DCA-500SSK — CONTR OL P ANEL The definitions below describe the controls and functions of the DCA-500SSK " Control Panel Control Panel Control Panel Control Panel Control Panel " (Figure 8).
P A GE 34 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — ENGINE OPERA TING P ANEL Figure 10. Engine Operating Panel.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 35 The definitions below describe the controls and functions of the DCA-500SSK " Engine Operating Panel Engine Operating Panel Engine Operating Panel Engine Operating Panel Engine Operating Panel " (Figure 10).
P A GE 36 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) Circuit Breakers T o protect the generator from an ov erload, a 3-pole , 1400 amp, main main main main main circuit breaker is provided to protect the UVWO output terminals from overload.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 37 Legs O and Ground are considered Bonded Grounds. NO TE DCA-500SSK — OUTPUT TERMINAL Figure 14.
P A GE 38 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) Output T erminal P anel A v ailab le V olta ges A wide range of voltages are available to supply load to many diff erent applications.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 39 Reading the Output T erminal Gauges The gauges and knobs on the control panel DO NO T eff ect the generator output. The y are to help the operator obser v e how much power supply is produced at the UVWO legs.
P A GE 40 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — OUTPUT TERMINAL 3 Phase, 240 V olt The following connection, with the voltage change-over board set into the 240V set position (See Figure 19), can off er THREE PHASE power at 240V .
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 41 DCA-500SSK — OUTPUT TERMINAL 480 V olt Set position The voltage change-over board 480V set position uses all 6 plates in 3 diff erent connection places . There are 2 plates at every position (Every plate is used).
P A GE 42 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) Outdoor Installation Install the generator in a location where it will not be exposed to rain or sunshine. Make sure the generator is on secure level ground so that it cannot slide or shift around.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 43 Figure 27. T ypical Generator Gr ounding Application DCA-500SSK — INST ALLA TION CA UTION : Always check Local, State, and Federal La ws bef ore grounding gener ator .
P A GE 44 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) General Inspection Prior to Operation The DCA-500SSK generator has been thoroughly inspected and accepted pr ior to shipment from the f actor y .
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 45 Lubrication Oil Fill the engine crankcase with lubricating oil through the filler hole, but do not overfill.
P A GE 46 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — PRE-SETUP Day-to-day addition of coolant is done from the reserve tank. When adding coolant to the radiator , DO NO T remo v e the radiator cap until the unit has completely cooled.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 47 DCA-500SSK — PRE-SETUP Battery Cable Installation AL W A YS be sure the batter y cables (Figure 30) are properly connected to the batter y ter minals as sho wn below .
P A GE 48 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — LO AD APPLICA TION Single Phase Load Always be sure to check the nameplate on the generator and equipment to insure the wattage, amperage and frequency requirements are satisfactorily supplied by the generator for operating the equipment.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 49 W ARNING: Before Starting Engine 1. Check the lubricating oil lev el prior to star ting the engine. Mak e sure the generator is le v el. The oil le vel must be maintained between two notches on the dipstick.
P A GE 50 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) 9 . The generator's frequency meter (Figure 40) displays the 60 cycle output frequency in HERTZ . Figure 40. Frequency Meter (Hz) 4. Close all engine enclosure doors (Figure 34).
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 51 DCA-500SSK — GENERA T OR ST AR T -UP PR OCEDURE (MANU AL) Figure 41. V oltage Meter (V olts) 10 . The generator's voltage meter (Figure 41) displays the 120 V A C in VO L T S .
P A GE 52 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) 14 . Set the engine speed switch (Figure 46) to low to idle engine, set to high when a load is being applied. 17 . Observe the generator's ammeter (Figure 49) and verify that it reads the anticipated amount of current with respect to the load.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 53 DCA-500SSK — GENERA T OR ST ART -UP PR OCEDURE (A UT O) When star ting generator in A uto mode use the "Man ual Star t - up" procedure except where noted (see below).
P A GE 54 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — GENERA T OR SHUTDO WN PROCEDURE Figure 52. Off/Manual Auto Switch (OFF) Engine Shutdown T o shutdown the generator use the f ollowing procedure: Figure 51.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 55 NO TE P A GE.
P A GE 56 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — MAINTENANCE General Inspection Prior to each use, the generating set should be cleaned and inspected for deficiencies. Check for loose, missing or damaged nuts, bolts or other fasteners.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 57 DCA-500SSK — MAINTENANCE 5. When the water level is near the mouth of the water filler , open drain plugs and star t the engine, and r un at lo w idling. K eep the engine running at low idling and flush the radiator for about 10 minutes.
P A GE 58 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) Generator Storage For storage of the generator for over 30 days, the following is required: z Fill the fuel tank completely , lubr icate and change oil.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 59 . 5 1 E L B A T E C N A N E T N I A M / N O I T C E P S N I s r H 0 1 Y L I A D s r H 0 5 2 s r H 0 0 5 s r H 0 0 0 1.
P A GE 60 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — GENERA T OR WIRING DIA GRAM DCA-500SSK — ENGINE WIRING DIA G.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 61 RAM DCA-500SSK — ENGINE WIRING DIA GRAM.
P A GE 62 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — TR OUBLESHOO TING (ENGINE) All breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based G N I T O O H S E L B U O R T E N I G N E .
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 63 DCA-500SSK — TR OUBLESHOO TING (ENGINE) ) D E U N I T N O C ( G N I T O O H S E L B U O R T E N I G N E . 6 1 E L B A T M O T P M Y S M E L B O R P E L B I S S O P N O I T U L O S t o n s i n o i t u l o v e r e n i g n E .
P A GE 64 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — TR OUBLESHOO TING (GENERA T OR/ENGINE) All breakdowns can be prevented by proper handling and ma.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 65 DCA-500SSK — TR OUBLESHOO TING (MPEC) G N I T O O H S E L B U O R T C E P M . 8 1 E L B A T n o t p m y Se s u a C e l b i s s o Pn o i t u l o S e r u s s e r p l i o w o L .
P A GE 66 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) How to read the marks and remarks used in this parts book. Items Found In the “ Remarks ” Column Serial Numbers- Where indicated, this indicates a serial number r ange (inclusive) where a par ticular par t is used.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 67 NOTE DCA-500SSK w/SA6D170AE-1 K OMA TSU ENGINE 1 to 5 Units 1 to 5 Units 1 to 5 Units 1 to 5 Units 1 to 5 Units Qty . P/ N Description 2 0 ..... 6125817032 . . . AIR FIL TER 3 0 .
P A GE 68 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) GENERA T OR ASSY . DCA-500SSK — GENERA T OR ASSY ..
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 69 DCA-500SSK — GENERA T OR ASSY . GENERA T OR ASSY . NO . P AR T NO .
P A GE 70 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — GENERA T OR ASSY . GENERA T OR ASSY ..
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 71 DCA-500SSK — GENERA T OR ASSY . GENERA T OR ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 9 7431310003 C O VER, BEARNG 1 1 0 8461312004 GASKET , BEARING 2 1 1 0010108095 HEX.
P A GE 72 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — CONTR OL BO X ASSY . CONTR OL BO X ASSY ..
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 73 DCA-500SSK — CONTR OL BO X ASSY . CONTR OL BO X ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 8481812502 CONTROL BO X 1 2 0601801194 CURRENT TRANSFORMER, AMMETER 3 CW-40LM 1000/5A 3 0017108020 HEX.
P A GE 74 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — CONTR OL BO X ASSY . CONTR OL BO X ASSY ..
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 75 DCA-500SSK — CONTR OL BO X ASSY . CONTR OL BO X ASSY . NO P AR T NO P AR T NAME QTY .
P A GE 76 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — ENGINE & RADIA T OR ASSY . ENGINE & RADIA T OR ASSY .
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 77 DCA-500SSK — ENGINE & RADIA T OR ASSY . ENGINE & RADIA T OR ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 C4925200004 ENGINE ...............................
P A GE 78 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — ENGINE & RADIA T OR ASSY . ENGINE & RADIA T OR ASSY .
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 79 DCA-500SSK — ENGINE & RADIA T OR ASSY . ENGINE & RADIA T OR ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 4 0 0131710060 BUSHING .............................
P A GE 80 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — ENGINE OPERA TING P ANEL ASSY . ENGINE OPERA TING P ANEL ASSY .
DCA-500SSK — PARTS AND OPERATION MANUAL (STD)— REV. #1 (04/14/01) — PAGE 81 DCA-500SSK — ENGINE OPERA TING P ANEL ASSY . ENGINE OPERA TING P ANEL ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 8485312002 SUPPORT LEG 1 2 0010012035 HEX. HEAD BOL T 4 0030012000 HEX.
P A GE 82 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — ENGINE OPERA TING P ANEL ASSY . ENGINE OPERA TING P ANEL ASSY .
DCA-500SSK — PARTS AND OPERATION MANUAL (STD)— REV. #1 (04/14/01) — PAGE 83 DCA-500SSK — ENGINE OPERA TING P ANEL ASSY . ENGINE OPERA TING P ANEL ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 3 0 0027105016 MACHINE SCREW 1 3 1 0602180105 BALL JOINT 2 3 2 0030008000 HEX.
P A GE 84 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — OUTPUT TERMINAL ASSY . OUTPUT TERMINAL ASSY ..
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 85 DCA-500SSK — OUTPUT TERMINAL ASSY . OUTPUT TERMINAL ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 C4231700603 SET BOARD , OUTPUT TERMINAL 1 2 7521860504 OUTPUT TERMINAL 4 3 7521850504 B RA CKET , OUTPUT TERMINAL 4 4 0010112040 HEX.
P A GE 86 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) OUTPUT TERMINAL ASSY . DCA-500SSK — OUTPUT TERMINAL ASSY ..
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 87 DCA-500SSK — OUTPUT TERMINAL ASSY . OUTPUT TERMINAL ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 2 7 0010108030 HEX. HEAD BOL T 1 0030008000 HEX. NUT 1 0041208000 PLAIN W ASHER 2 2 8 C4237100504 CO VER 1 2 9 0017108020 HEX.
P A GE 88 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — B A TTER Y ASSY . BA TTER Y ASSY ..
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 89 DCA-500SSK — B A TTER Y ASSY . BA TTER Y ASSY . NO P AR T NO P AR T NAME QTY .
P A GE 90 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — MUFFLER ASSY . MUFFLER ASSY ..
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 91 DCA-500SSK — MUFFLER ASSY . MUFFLER ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 8482311002 MUFFLER 1 2 0019210020 HEX. HEAD BOL T 4 3 7432356504 P A CKING 2 4 7432356604 P A CKING 1 5 7432356704 P A CKING 1 6 0019110030 HEX.
P A GE 92 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — FUEL T ANK ASSY . FUEL T ANK ASSY ..
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 93 DCA-500SSK — FUEL T ANK ASSY . FUEL T ANK ASSY . NO P AR T NO P AR T NAME QTY .
P A GE 94 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — ENCLOSURE #1 ASSY . ENCLOSURE #1 ASSY . ADD THE FOLLO WING DIGITS AFTER THE P AR T NUMBER WHEN O.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 95 ENCLOSURE #1 ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 8485111002 BASE 1 2 3875116304 FOOR P ANEL 1 3 7435116104 FLOOR P ANEL 1 4 0017108020 HEX. HEAD BOL T 1 8 5 8485118004 GUIDE P ANEL, AIR 1 6 0017108020 HEX.
P A GE 96 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — ENCLOSURE #1 ASSY . ENCLOSURE #1 ASSY ..
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 97 DCA-500SSK — ENCLOSURE #1 ASSY . ENCLOSURE #1 ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 2 9 0010120075 HEX. HEAD BOL T 6 0030020000 HEX.NUT 6 0040020000 LOCK W ASHER 6 0041220000 PLAIN W ASHER 1 2 3 0 0010120065 HEX.
P A GE 98 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — ENCLOSURE #2 ASSY . ENCLOSURE #2 ASSY . ADD THE FOLLO WING DIGITS AFTER THE P AR T NUMBER WHEN O.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 99 ENCLOSURE #2 ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 C4444000003 REAR FRAME 1 2 3875151004 LOUVER P ANEL 1 3 0205006000 HEX.
P A GE 100 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — ENCLOSURE #2 ASSY . ENCLOSURE #2 ASSY ..
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 101 DCA-500SSK — ENCLOSURE #2 ASSY . ADD THE FOLLOWING DIGITS AFTER THE P ART NUMBER WHEN ORDERING ANY P AINTED P ANEL.
P A GE 102 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — ENCLOSURE #3 ASSY . ENCLOSURE #3 ASSY . ADD THE FOLLO WING DIGITS AFTER THE P ART NUMBER WHEN O.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 103 ENCLOSURE #3 ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 C4454201603 S P ASHER P ANEL 1 2 0019110070 HEX.
P A GE 104 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — ENCLOSURE #3 ASSY . ENCLOSURE #3 ASSY ..
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 105 DCA-500SSK — ENCLOSURE #3 ASSY . ENCLOSURE #3 ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 8 7525151504 LOUVER P ANEL 1 1 9 7525151404 LOUVER P ANEL 1 2 0 7975151004 LOUVER P ANEL 1 2 1 0205006000 HEX.
P A GE 106 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — RUBBER SEAL ASSY . R UBBER SEAL ASSY ..
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 107 R UBBER SEAL ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 0228901640 R UBBER SEAL 6 2 0228900970 R UBBER SEAL 4 3.
P A GE 108 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — NAMEPLA TE AND DECALS NAME PLA TE AND DECALS.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 109 NAME PLA TE AND DECALS NO P AR T NO P AR T NAME QTY . REMARKS CONTR OL BO X GR OUP 2- 1 0800520100 P LA T E ; ON-OFF ..................................................
P A GE 110 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) DCA-500SSK — NAMEPLA TE AND DECALS NAME PLA TE AND DECALS.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 111 DCA-500SSK — NAMEPLA TE AND DECALS NAME PLA TE AND DECALS NO P AR T NO P AR T NAME QTY . REMARKS 1-1 C4551001002 DECAL: HANDLING PROCEDURES .........................
P A GE 112 — DCA-500SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #1 (04/14/01) P A YMENT TERMS T erms of payment f or par ts are net 10 da ys. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice.
DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01) — PAGE 113 NO TE P A GE.
HERE'S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING P P P P P AR AR AR AR AR TS DEP TS DEP TS DEP TS DEP TS DEP AR AR AR AR AR TMENT TMENT TMENT TMENT TMENT 800/4.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Multiquip DCA-500SSK è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Multiquip DCA-500SSK - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Multiquip DCA-500SSK imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Multiquip DCA-500SSK ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Multiquip DCA-500SSK, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Multiquip DCA-500SSK.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Multiquip DCA-500SSK. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Multiquip DCA-500SSK insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
