Manuale d’uso / di manutenzione del prodotto RF802EW del fabbricante Multi-Tech Systems
Vai alla pagina of 28
Model RF802EW Wireless Router/Access Point Quick Start Guide.
Quick Start Guide PN#S0000205 Revision A Model RF802EW Wireless Router/Access Point Copyright This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-T ech Systems, Inc. All rights reserved. Copyright © 2001, by Multi-Tech Systems, Inc.
Contents Introduction ................................................................................... 4 Related Documentation ................................................................. 4 Get Adobe Acrobat Reader ............................
RouteFinder RF802EW Quick Start Guide 4 Introduction Congratulations on the purchase of one of the finest broadband routers available today , Multi- T ech System’s RouteFinder Model RF802EW .
Hardware Installation 5 Hardware Installation Safety Warnings 1. Never install telephone wiring during a lightning storm. 2. Never install telephone jacks in a wet location unless the jack is specifically designed for wet locations. 3. This product is to be used with UL and cUL listed computers.
RouteFinder Quick Start Guide 6 2. Connect the Ethernet port of a PC or network device to the LAN port. If you are using the Uplink option, port number 1 cannot be used as a LAN port. 3. If you are using an analog modem, connect it to the Serial Async port.
Software Installation 7 Software Installation and Configuration Before beginning the installation process, ensure that your system meets all hardware and software requirements: • Intel 486 or higher processor . • 10/100 BaseT cable to connect the RF802EW to the network.
RouteFinder Quick Start Guide 8 3. Follow the on-screen instructions to install the software. 4. When the software installation completes, the Setup Wizard dialog box displays.
Software Installation 9 5. The Setup Wizard: Device List dialog box displays. The Setup Wizard automatically checks your network for available network devices and displays them on the screen. Select the device you wish to configure from the Device Name list.
RouteFinder Quick Start Guide 10 6. The Setup Wizard: Device IP Address dialog box displays. Enter your local internal network ’ s IP address for this device. The Setup Wizard will automatically detect the first three octets of your local IP address.
Software Installation 11 7. The Wireless Function dialog box displays. Select the function for the wireless port function by selecting Enable Wireless Access Point function only , or Enable Wireless Access Point + Router function . If you are using NA T Enabled, you may also select Enable PPPoE .
RouteFinder Quick Start Guide 12 In the ESSID box, enter the wireless ID. Wireless is the default ID. From the Channel list, select a channel. 6 is the default channel. All workstations must have the same ESSID Make sure that the channel is correct for your network.
Software Installation 13 10. The External IP Assignment dialog box displays. Enter the W AN Ethernet IP address information provided by your ISP or other external network administrator . • In the External IP Address box, enter the ISP or remote system ’ s IP address.
RouteFinder Quick Start Guide 14 1 1. The Asynchronous Port Function dialog box displays. Select Remote Access , IP Routing (NA T Enabled) or IP Routing (NA T Disabled) . • Select Remote Access to allow remote users to dial-in to the network to access resources as if the remote user is connected to the network locally .
Software Installation 15 1. Remote Access Y ou must define the location of your remote user account database by selecting a) Use Local Client List or b) Use RADIUS Server . Follow the instructions for the user database your system will use.. Note: The Local Client List allows you to add a maximum of 64 users.
RouteFinder Quick Start Guide 16 • V ariable Callback : Select V ariable Callback for remote users that travel or dial-in from various locations and need callback security . This option allows clients to specify the callback telephone number each time they connect to the network.
Software Installation 17 Server are the same server , so the IP address will be the same. Click Next . 2. IP Routing (NA T Enabled) and 3. IP Routing (NA T Disabled) If you select IP Routing for the asynchronous port, the Setup Wizard: IP Routing dialog box displays.
RouteFinder Quick Start Guide 18 • Password : Enter the Password for your remote server or ISP account. • Password V erification : Re-enter the password for your remote account. Click Next . 12. The Setup Wizard: DNS IP Address dialog box displays.
Software Installation 19 Enter your ISP ’ s DNS Server IP address. If you are not sure of the IP address, contact your ISP . Refer to the Glossary in the User Guide for more information about the DNS Server . Click Next . 13. The Setup Wizard: Modem Settings dialog box displays.
RouteFinder Quick Start Guide 20 the default modem values. 14. T o select your modem , click . The system loads modem information. 15. The Modem Initial Command dialog box displays.
Software Installation 21 Modem will work. If you are using an ISDN T A, refer to the ISDN T A ’ s User Guide for information on the initialization and hang up strings. Use RouteFinder Manager to enter your modem or T A strings. 16. The Setup Wizard: Modem Setting dialog box re-displays.
RouteFinder Quick Start Guide 22 17. The Check List dialog box displays summarizing your configuration selections. Ensure that all values have been correctly entered. If you find an incorrect setting, click Back to return to the screen containing the error and correct it.
Software Installation 23 18. The Note dialog box displays indicating that you have completed the Setup Wizard. Read the “ IMPORT ANT! ” information contained in the dialog box.
RouteFinder Quick Start Guide 24 Testing Your Connection When you select Run Monitor , the RouteFinder Monitor program loads. 1. T o test your current settings, select T est Connection . Select Connect Port 1 to test the W AN port. Select Connect Port 2 to test the async port.
Software Installation 25 3. The RF802EW T elnet Server Menu displays. T o use the menu, select the letter corresponding to the value you ’ d like to change.
RouteFinder Quick Start Guide 26 • If you define the async port for Remote Access, use IP Assigned Method to define whether or not the remote users will use the RouteFinder ’ s DHCP server to obtain their IP address. Select Protocols and if necessary on your network, select an IPX/ SPX Frame T ype .
Software Installation 27 Limited Warranty Multi-T ech W arranty & Repair Policies Multi-T ech Systems, Inc., (hereafter “ MTS ” ) warrants that its products will be free from defects in material or workmanship for a period of two years from date of purchase, or if proof of purchase is not provided, two years from date of shipment.
S0000205.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Multi-Tech Systems RF802EW è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Multi-Tech Systems RF802EW - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Multi-Tech Systems RF802EW imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Multi-Tech Systems RF802EW ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Multi-Tech Systems RF802EW, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Multi-Tech Systems RF802EW.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Multi-Tech Systems RF802EW. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Multi-Tech Systems RF802EW insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
