Manuale d’uso / di manutenzione del prodotto WD3300U del fabbricante Mitsubishi Electronics
Vai alla pagina of 17
EN-1 LAN Contr ol Utility User Manual (for WD3300U) Contents Pr eparation/SetUp ......................................................................... 2 Preparation befor e using the network function ........................................... 2 Connection .
EN-2 Pr eparation/SetUp Pr eparation before using the network function This projector is equipped with the network function to contr ol and monitor the projector’ s operations using a W eb browser and to send e-mail notification. Before using the network function, perform the following thr ee preparation steps.
EN-3 1 Copy two files (DI_4.1.3.6.msi and Setup.exe) contained in the T ools folder of CD-ROM to the har d disk of your personal computer . 2 Double-click the file named Setup.exe. 3 When the following window appears, click Next. Installation Before starting installation, be sur e to read “ReadMe.
EN-4 Preparation/SetUp (continued) 4 Select a folder to install the program, and click Next. 5 Click Next. 6 Installation starts. The progr ess of the installation process is • displayed as shown on the right. 7 When the installation process is completed, click Close.
EN-5 Setting the IP addr ess of the projector Before setting the IP addr ess, check that the projector has been LAN-networked and turn on the main power of the projector .
EN-6 5 Select [Obtain an IP address automatically] and click Next. 6 Click Next. Check that the options are marked with • checkmarks as shown on the right. Keep them unchanged for normal use. 7 Click Assign. 8 Click Finish. 9 Click the Search button.
EN-7 5 Select [Assign a specific IP address] and click Next. 6 Enter a fixed IP address (for example, 192.168.0.1) and click Next. (Note) Do not use 0 or 255 for the last digit of the IP address. 7 Click Assign. 8 Click Finish. 9 Click the Search button.
EN-8 1 Start the Projector -Control Device Installer . Select [Start] - [All Programs] - [Pr ojector] - • [Projector -Control Device Installer] (in the case of Windows ® XP). 2 Press the + buttons on the left pane to expand the tree structur e until the IP address you set appears.
EN-9 1 Enter “0” and press the Enter key . 2 Input the old (current) passwor d and press the Enter key . (Default password is admin.) If you input a wrong passwor d, an error message • appears and the setting menu is displayed again. In this case, set the password again.
EN-10 1 Enter “3” and press the Enter key . 2 T o enable the e-mail notification function of ProjectorView , enter “1” and press the Enter key . (Default is OFF (0).) (See pages 12 - 15 for ProjectorView function.) Setting the LAN control (LAN-Contr olled Mode) Preparation/SetUp (continued) 1 Enter “1” and press the Enter key .
EN-11 1 Enter “9” and press the Enter key . 2 The setting screen is shaded and the setting is updated. It takes about 10 seconds for the setting to be • updated.
EN-12 1 Start the Projector -Control Device Installer . Select [Start] - [All Programs] - [Pr ojector] - • [Projector -Control Device Installer] (in the case of Windows ® XP). 2 Expand the tree structur e on the left pane until the IP address you set appears.
EN-13 5 The password input scr een appears. Enter the password you set. The default password is admin. • (Note) If you input a wrong passwor d 4 successive times, the W eb browser is closed. In this case, r epeat from step 1. 6 The ProjectorView main scr een appears.
EN-14 ProjectorView (continued) VIRTUAL REMOTE contr oller Put a checkmark in the box of the Virtual remote enabled on the Pr ojectorView main screen, and click the VIRTUAL REMOTE button. The following Virtual Remote window appears. For the functional descriptions of each button, see the user manual of the projector .
EN-15 Initial setting T o load information on the pr ojector such as model name and lamp operating time, set the projector data in advance. Click the SETUP button on the ProjectorView main scr een. The Projector Setup screen appears. Enter data according to the description of each setting item.
EN-16 Support for the PJLink™ function This projector supports standar d protocol PJLink™ for projector contr ol and you can control and monitor projector’ s operations using the same application among projectors of dif ferent models and dif ferent manufacturers.
EN-17 [Notes on Instant Shut Down] Instant shutdown of the projector during contr ol using the network function may cause ProjectorView to fail to display data correctly .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Mitsubishi Electronics WD3300U è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Mitsubishi Electronics WD3300U - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Mitsubishi Electronics WD3300U imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Mitsubishi Electronics WD3300U ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Mitsubishi Electronics WD3300U, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Mitsubishi Electronics WD3300U.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Mitsubishi Electronics WD3300U. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Mitsubishi Electronics WD3300U insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
