Manuale d’uso / di manutenzione del prodotto W 829 del fabbricante Miele
Vai alla pagina of 60
Operating instructions for Washing machine W 829 It is essential to read these operating instructions before Q installing or using the machine, to avoid the risk of accident, or damage to the machine.
Caring for our environment Disposal of the packing mate ria l The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. Rather than just throwing these materials away, please ensure they are offered for recycling.
Contents Caring for our environment Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Disposal of your old appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Addition al optio ns Soak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Pre-wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation Installation surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Guide to the machine Genera l view 1 Electric supply cable 2 Inlet hose (able to withstand press- ures of at least 70 bar) 3 Flexible drain hose (with detachable swivel elbow) 4 Detergent dispenser dr.
Control panel b “I-ON / 0-OFF” button To switch the machine ON or OFF or to interrupt a programme. c “Door” button Opens the machine door. d “STAR T” but ton Starts the wash programme e Bu.
Warning and safety instructions Read the operating instructions be- fore using this machine for the first time. They contain important infor- mation about the safety, use and maintenance of the machine. This way you will avoid the risk of acci- dents and damage to the machine.
The best materials are used in the manufacture of this machine, and every care is taken to check all p arts. However, with time, deterioration of parts can occur, especially with such components as hoses, giving rise to leaks. Check the hose regularly for signs of wear, and change in good time, to avoid leaks and subsequent damag e.
If the correct amount of detergent is dispensed, the machine should not need to be descaled. If, however, you do wish to descale the machine only use proprietary non-corrosive de- scaling agents and strictly observe the instructions. Consult the Miele Cus- tomer Service Department.
Washing environmentally and economically – Water consumption and energy usage are determined by the size of the load. Load to the maximum rec- ommended for the programme se- lected. – The washing times can vary con- siderably due to the automatic load adjustment feature.
Before using for the first time Before using the machine for the first time ensure that it is correctly in- stalled and connected. See the rele- vant section under "Installation". Also check that the fluff filter is securely tightened. Otherwise there is a risk of water leakage during use.
How to wash correctly Brief guide The headings numbered ( 1 , 2 , 3 ,...) show the operating sequence and can be used as a brief guide. Before washing 1 Prepare the wash load. Empty all pockets. Foreign objects (e.g. nails, coins, paper clips, etc.) can cause dam- age to textiles and components in the machine.
2 Press the “ Door ” bu tton . 3 Load the drum. Unfold washing and load loosely in the drum. To achieve best results it is ad - visable to make up mixed loads consist- ing of both large and small items. This improves the washing effect and helps distribute the load evenly to keep the machine stable and reduce the noise level during spinning.
9 Select any additional option requir ed. A maximum of two additional options can be chosen, provided they are com- patible with the programme selected, (see the Programme survey in the Sec- tion on programmes). Only one option out of "Soak", "Pre-wash" and "Short wash" can be selected.
After washing § Press the “ Door ” bu tton . ~ Press and release the “ I-On/0-Off ” button . $ Remove the washing. Only remove washing from the ma- chine once the drum has stopped turning, otherwise you may seriously injure yourself. % Check the folds in the door seal for any small articles e.
Adding or r emoving washing after programm e start Washing can be added or removed after the programme has already started, when using the following pro- grammes. – COTTONS – MINIMUM IRON – WOOLLENS / – QUICK WAS H – Starch – MIXED WASH Press the “ Door ” button and hold it until the door springs open.
Prog ramme . . . . . . interruption Press the “ I-ON/0-OFF ” button. To continue with the same pro- gramme pr ess the “ I-ON/0-OFF ” but- ton again.
Adding detergent All modern detergents produced for automatic washing machines are suit- able, including liquid, compact (con- centrated), tablets and special applica- tion detergents. Use dispensing aids , e.g. balls, if these are supplied with the detergent.
Adding detergent i = Com partme nt so ak/p re-w ash j = Compartment main wash p = Compartment fabric conditioner Water is taken in through compartment i in the pre-wash. Water is taken in through compartment j in the main wash. If the capacity of compartment j is insufficient for the amount of detergent needed for a COTTONS programme (e.
Automatic fabric cond itioners, tex- turisers, or liquid starch Open the lid of compartment p . Add the fabric conditioner, texturiser or liquid starch. D o not exce ed t he maxi mum l eve l mar k. Close the compartment lid. Push the drawer back in. The conditioner, texturiser or liquid starch is automatically dispensed in the last rinse.
Programmes Programme se lecti on Programme Fabric Temperature max. spin speed COTTONS Cottons and l inen fabrics, e.g. b ed linen, table linen, towelling, jeans, underwear, T-shirts, nappies.
max. load Additional options Notes 5 kg – Soak – Pre-wash – Short – Water plus (Option 1,2,3,4) With heavily soiled items sel ect "Soak" or " Pre-wash". Wash dark colours in liquid detergent. For normally soiled items sel ect "Short".
Sequence COTTONS 1) MI NIMU M IRON 1) DELICATES WOOLLENS / Soak optional optional optional – Pre-wash optional optional optional – Main wash XXXX Top-up rinse from 75 ° Cp r o g r a m m a b l e ––– Graduated rinsing – from 40 ° C- – No.
Quick Wash Starch Spin Separate rinse MIXED WASH 1) high cotton content high polyes ter content –––– optional optional – X –– optional optional X ––– XX –––––– ––––– X 2 –– 23 o r 4 2) 3 2 ––– 22 –––– 22 max.
Care symbols Washing 9 Cottons 95 ° C, 75 ° C 8 Cottons 60 ° C 7 Cottons 40 ° C 6 Cottons 30 ° C 4 Minimum iron 60 ° C, 50 ° C 2 Minimum iron 40 ° C 1 Minimum iron 30 ° C a Delicates 40 ° C .
Additional options To select an additional option to the basic programme press the button for that option. The indicator light for the option comes on. If an additional option is chosen which is incompatible with the basic pro- gramme, (see Programme selection chart), the indicator light goes out when the button is released.
Water plus The water level increases in "soak", pre-wash", "main wash" and / or "rinses", and / or an extra rinse can be carried out.
Electronic programm e locking Programme locking prevents the ma- chine from being opened or the pro- gramme cancelled during a wash programme. Switching on pr ogramme locking 1 Select a programme, (see Brief guide to washing correctly). 2 Press the “ STA RT ” button for at least 5 seconds.
Programmable functions Programmable functions enable the user to introduce further features as required. They remain stored in memory until they are cancelled by the user. Maximum water level The water level for rinsing is automati- cally raised to the maximum level where rinse results are particularly important.
Water plus system The "Water plus" button offers four op- tions, increasing water level and / or bringing in an extra rinse cycle. To activate the option press the "Water plus" button when selecting your wash pro gramme befor e pressi ng the START button.
Selecting the Options By pressing the "START" button you can select the other options. To confirm a new selection another indicator light comes on and the previous one goes out. Each time "START" is pressed a differ- ent indicator light comes on.
Activating the i compart ment This function should be activated if traditional "big box" detergents are used. For the first 10 seconds of the main wash cycle water flows in through compartment i . Compartment j may sometimes not be able to hold the total amount of detergent required when: - t he water is very h ard (over 3.
Soak tim e This is accessed for a programme by pressing the SOAK button on the facia. You can programme a soak time of: - 2 hours (factory setting) or - 1 hour 30 mins or - 1 hour or - 30 mins. A "Soak time" of 2 hours is set at the factory.
Gentle acti on For gentle washing of slightly s oiled items. Drum action is reduced. Gentle action can be used with the Cot- tons, Minimum iron, Quick Wash, Mixed wash and Starch programmes. If "Gentle action" has been pro- grammed, every wash cycle in these programmes is carried out with gentle action rhythm.
Top-up rinse for Cottons At the end of the main wash addi- tional water flows into the drum and the suds are cooled down. Hot suds can damage plastic drainage pipes.
Memory function If an additional option is selected for a programme, and / or the spin op- tion is altered, the machine stores these changes in memory at the start of a programme. The memory function is active when the machine is first delivered but can be programmed to be switched off.
Cleaning and care Cleaning the washing machine Clean the casing with a mild non-ab- rasive detergent or soap and water. Wipe dry with a soft cloth. Clean the facia panel and flap with a damp cloth and dry with a soft cloth. The drum can be cleaned using a suitable proprietary stainless steel cleaner.
Cleaning the detergent dispen- ser dr awer Pull out the detergent dispenser drawer until a resistance is felt. Press down the red release catch and at the same time pull the drawer right out of the machine. Clean the dispenser compartments and conditioner channel.
Cleaning and care Cleaning the fluff (drain) filter and pump Check the fluff (drain) filter initially after 3-4 washes to ascertain how often it is likely to require cleaning. With normal cleaning approx. 2 litres of water run out. If the drain outlet is clogged, more water will be retained in the machine (up to 25 litres) .
Once the flow of water ceases, remove the fluff filter completely. Clean the fluff filter thoroughly. Remove any foreign objects (e.g. buttons, coins, etc.) and fluff. Turn the impeller by hand to check that it is free to rotate. Any foreign ob- jects causing an obstruction should be rem oved.
To clean the water inlet filte rs The washing machine has two filters to protect the inlet valves.These filters should be checked every 6 months or so, or more often if there are frequent interruptions to the water sup- ply. To clean the filter in the u nion in the open end of the inlet hose: First turn off the stopcock.
Problem solving guide Repair work to electrical appliances should only be carried out by a suitab ly qualified person in accordance with local and national regulations. Unauth- orised repairs could be dangerous. What to d o, if . . . Caus e . . . Reme dy .
What to do, if . . . Cause . . . Remedy . . . . . . the “ Check (water) inlet" indicator fl ashes duri ng the program me but the prog ramme is ru nning normally. The water inlet is restricted. – The stopcock is not opened far enough. – The inlet hose is kinked .
What to do , if . . . Caus e Reme dy . . . the in dica tor lig ht “ Drain / Final spin ” flashes. The final spin has not t aken place. The machine d etected an imbalance. – Loosen and re-distribute the washing. – Select the p rogramme Spin or Drain.
What to do , if . . . Cau se Rem edy . . . larg e resi due s of detergent remain in the dispenser dr awer. The water supply pressure i s too low. – Clean the filter in the water inlet system. – It may be useful to select “ Water plus ” . Washing powder used with water softener tends t o become sticky.
Opening the drum door in the event of a power failure Switch off the washing machine. Open the fluff (drain) filter flap and drain the water as described in "Cleaning and care", (fluff (drain) fil- ter and pump ). Caution: if laundry has been washed at a high temperature, water draining out of the machine will still be hot.
After sales service Customer contac t In the event of any faults which you can- not remedy yourself please contact – Your Miele Dealer or – Your nearest Miele Service depart- ment (see back cover for the ad- dress). When contacting the Service Depart- ment, please quote the Model and Ser- ial nos.
Installation Installa tion surface A concrete floor is the most suitable in- stallation surface for a washing ma- chine, being far less prone to vibration during the spin cycle than wooden floorboards or a surface with "soft" properties. Please note the following points: The machine must be level and se- curely positioned.
Turn the right-hand transit bar 90 ° . Withdraw the two bars together with the support plate. Plug the two holes with the plastic caps s upp lied. The machine should not be moved with- out the transit fitting in place. The transit fitting should be stored in a safe place for future use.
Levell ing the machi ne The machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase elec- tricity and water consumption and may cause the machine to move about. The four adjustable screw feet are used to level the machine.
Building under To build this appliance under a con- tinuous worktop / in a kitchen run: A special building under conversion kit* is required. The machine lid must be replaced by a cover plate. To en- sure electrical safety the cover plate must be fitted.
Connection to water supply The machine should be connected to a mains water supply in accordance with standard regulations. In Germany the washing machine is not required to have a non-return valve as it has been designed to comply with the relevant German DIN standard.
Connection to the drainage system The machine drains via a drain pump with a delivery head of 1 metre. The drain hose is 1.5 m long. It must not be kinked as this restricts drainage. The swivel elbow at the end of the hose can be turned in either direction, or can be detached if required, with a sharp twist and pull.
Electrical connection U.K. All electrical work should be carried out only by a suitably qualified and compe- tent person, in strict accordance with national and local safety regulations. The appliance is supplied with a mains cable with moulded plug for connection to a 230-240V mains supply.
Electrical connection U.K. Non-rewireable plugs BS 1363 If this machine is fitted with a non-re- wireable plug, the following information applies: If the socket outlets are not suitable for the plug supplied with the product, it must be cut off and an appropriate plug fitted.
Consumption data Programme (without any additional options or programmable functions) Load Consumpt ion data Energy Water Programme time in kWh litres normal short COTTONS 95 ° C 5.0 kg 1.70 52 1 h 54 mins 1 h 26 mins 60 ° C* 5.0 kg 0.95 52 1 h 58 mins 1 h 16 mins 40 ° C 5.
Technical Data Height . . . . . . . . . . . . . . . . . . . . . . . . . . Width . . . . . . . . . . . . . . . . . . . . . . . . . . Depth . . . . . . . . . . . . . . . . . . . . . . . . . . Depth with door open . . . . . . . . . . . . . Weight . . . .
59.
Alteration rights reserved/000 0900 This paper consists of cellulose whi ch has been bl eached without the use of chl orine..
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Miele W 829 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Miele W 829 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Miele W 829 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Miele W 829 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Miele W 829, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Miele W 829.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Miele W 829. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Miele W 829 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
