Manuale d’uso / di manutenzione del prodotto 6757530 del fabbricante Miele
Vai alla pagina of 76
Operating instructions for Washing machine W 3985 WPS To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time.
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children.
Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operating the washing machine .
Changing the programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Cancelling a programme ............................................3 3 Interrupting a programme ...........................................3 3 Changing a programme .
Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Front view ........................................................4 9 Rear view ........................................................5 0 Installation surface .
This washing machine conforms to current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the washing machine, please read these instructions carefully before using it for the first time.
Technical safety ~ Before setting up the washing machine, check it for any externally visible damage. Do not install or use a damaged washing machine. ~ Before connecting the washing machine, ensure that the connection data on the data plate (voltage and connected load) match the mains electricity supply.
~ This washing machine may only be used in mobile installations such as ships if a risk assessment of the installation has been carried out by a suitably qualified engineer. ~ Do not make any alterations to the washing machine, unless authorised to do so by Miele.
~ Textiles which have been pre- treated in solvent based cleaning agents must be thoroughly rinsed in clean water before being washed in the machine. ~ Never use solvent based cleaning agents, e.g. those containing benzene, in this machine, as this may result in damage to component parts and create toxic fumes.
Control panel a Display See the following pages for more information. b Short cut buttons For selecting an individual washing programme quickly. These buttons can be programmed to select your own favourite wash programmes.
Displays Entry menu 1 Cottons 60°C Programme selection ... 2 Minimum iron 40°C Settings ! ... 3 Automatic 40°C 4 Woollens H 30°C 15:00 When the machine is switched on, the entry menu (with default settings) appears and Programme selection is highlighted.
Programme selection menu Programme Back A selection Cottons Minimum iron Delicates H You can use the multi-function selector to select any programme. The highlighting will move up or down depending on the direction the multi-function selector is turned in.
Before using the machine for the first time ensure that it is correctly installed and connected. See "Installation and connection". Also check that the drain filter is securely tightened to prevent the risk of water leaks during use. This washing machine has completed a comprehensive functional test.
Setting the time (of day) 12 :00 Set the time ^ Turn the multi-function selector to select the hour and press it to confirm your selection. Now set the minutes.
The main menu for the Cottons programme appears Cottons 60°C 1600 rpm Extras: none selected Duration 1:19 h Detergent + Timer + + Save + Back A + ^ Press the flashing Start button.
Energy and water consumption – Water consumption and energy usage are determined by the size of the load. To make the most out of your machine, load the maximum dry load for the programme you are using. – Use the Automatic and Express programmes for small loads.
Sort the laundry ^ Empty all pockets. , Foreign objects (e.g. nails, coins, paper clips, etc.) can cause damage to garments and components in the machine. Removing marks ^ Badly soiled areas, stains etc. should be cleaned as soon as possible, preferably whilst still fresh.
Switch on the washing machine The interior drum lighting will come on. Select a programme You can select a programme either by: – using the appropriate short cut button to select one of the four programmes listed in the display ("favourites"), or – going into the Programme selection menu.
If you do not make a selection in the sub-menu within approx. 20 seconds, the display will revert to the main menu. Your selection of temperature, spin speed and extra options will now appear in the main menu.
Load the drum ^ Press the a button to open the drum door. The washing machine has a sensor which measures the amount of laundry placed in the drum. The display shows the percentage of the maximum load which has been placed in the drum. The maximum load will depend on the programme chosen.
Select the Timer (if required) You can use the timer to set the end time of a programme. The start of a programme can be delayed from 30 minutes up to a maximum of 24 hours, allowing you to make use of night-time economy electricity rates, for example.
Add detergent The percentage amounts in the display will help you to add the correct percentage amount of detergent recommended by the manufacturer. 40% = Add slightly less than half the amount recomm.
Start the programme ^ Press the flashing Start button. The estimated programme duration and the programme sequence will appear in the display. During the first 10 minutes the machine measures how much water is being absorbed by the laundry. The programme duration may be longer or shorter depending on this absorbency rate.
Short For light to normal soiling with no visible staining. The duration of the main wash is reduced. Water plus The water level in the main wash and the rinses will be increased if the Water plus option is selected. Rinse hold See the next page. Soak For heavily soiled and stained items with protein stains (e.
Final spin speed Programme rpm Cottons 1800 Minimum iron 1200 Delicates 600 Automatic 1200 Dark garments 1200 Shirts 600 Denim 900 Express 1600 Woollens 1200 Silks 400 Sportswear 1200 Outerwear 800 Hy.
Cottons cold to 95°C Max. load 6.5 kg Fabric Cottons, linens or cotton mix fabrics, e.g. table linen, towelling, underwear, T-shirts etc. Extra options Short, Pre-wash or Soak, Water plus, Rinse hold Minimum iron cold to 60°C Max. load 3.0 kg Fabric Synthetics, mixed fibres and easy care cottons.
Shirts cold to 60°C Max. load 2.0 kg Notes – Pre-treat collars and cuffs if necessary. – Wash silk garments in the Silks programme. Extra options Short, Water plus, Rinse hold Denim cold to 60°C Max. load 3.0 kg Notes – Wash denim inside out. – Denim often contains excess dye and will run during the first few washes.
Sportswear 30°C to 60°C Max. load 2.0 kg Garment Lightly soiled sports garments which require washing or freshening up. Extra options Short, Pre-wash or Soak, Water plus, Rinse hold Outerwear cold to 40°C Max. load 2.0 kg Garment Outerwear made from micro-fibres such as Gore-Tex ® , SYMPATEX ® , WINDSTOPPER ® etc.
Curtains cold to 40°C Max. load 2.0 kg Item Curtains, including net curtains, specified as machine-washable by the manufacturer. A pre-rinse without detergent is carried out automatically to remove dust. Note For curtains which crease easily, reduce the spin speed or deselect the spin.
Main wash Rinses Spinning Water level Wash rhythm Water level No of rinses Rinse and interim spin Final spin Cottons d a ( 2-3 3) LL Minimum iron ( c e 2-3 4) LL Delicates e d e 3 – L Automatic ( ab.
This machine has fully electronic controls with automatic load recognition. It takes in the right amount of water required for the programme depending on the amount of laundry and its absorbency rate. This means that programme cycles and durations can vary.
Washing The figure quoted in the bucket is the maximum temperature the garment can be washed at. The number of bars under the symbol indicates the level of agitation permitted.
Cancelling a programme Cottons 60°C 1600 rpm Extras: none selected Main wash 1:06 h Detergent + Timer + + Save + Cancel + You can cancel a programme at any time after it has started by pressing short cut button 4 Cancel . The suds will be pumped away.
Adding or removing laundry after a programme has started ^ Press the door button / to open the drum door. ^ Add or remove items. ^ Close the drum door. The programme will continue automatically. Please note: Once a programme has started the machine cannot recognise any adjustment to the load.
The correct detergent All modern detergents produced for automatic Front loading washing machines are suitable. Use dispensing aids, e.g. balls, if these are supplied with the detergent. Tablets are suitable for full loads, but note that it may be impractical to reduce tablets for smaller loads.
The right amount to dispense will depend on the following: – The quantity of the laundry – The soiling level of the laundry Lightly soiled No visible dirt or stains. Possibly slight body odour. Normally soiled Visibly dirty and/or just a few slight stains.
Fabric conditioners and liquid starch Fabric conditioners make garments soft to handle and help prevent static cling when tumble drying. Starch stiffens and gives body to items of laundry, e.
, Disconnect the machine from the mains electricity supply and withdraw the plug from the socket before cleaning the machine. , The washing machine must not be hosed down. External casing and fascia panel ^ Clean the casing with a mild non- abrasive cleaning agent or soap and water using a well wrung-out cloth.
^ Clean the siphon. 1 . Remove the siphon from compartment § and rinse under warm running water. Clean the siphon tube in the same way. 2 . Replace the siphon. If starching frequently, thoroughly clean the siphon and siphon tube regularly. A build-up of starch will cause them to get clogged.
Cleaning the filter in the water inlet The washing machine has a filter to protect the water inlet valve. The accessible filter in the union in the open end of the inlet hose should be checked every six months, or more often if there are frequent interruptions to the external water supply.
What to do, i f... With the help of the following notes, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be put right without contacting the Service Department.
Problems with the load size indicator Problem Possible cause Remedy The display indicates a load of < 25% even though the drum is full. There was already laundry in the drum when the washing machine was switched on. This has decalibrated the sensor from the zero setting.
General problems Problem Possible cause Remedy The machine shakes during the spin cycle. The machine feet are not level. Level the machine (see "Installation"). The laundry has not been spun properly and is still wet. The machine detected an imbalance during the final spin and reduced the spin speed automatically.
An unsatisfactory wash result Problem Possible cause Remedy Liquid detergent does not give the required result. Liquid detergents usually contain no bleaching agents. They do not remove fruit, coffee and tea stains. – Use a general purpose detergent containing a bleaching agent.
The drum door cannot be opened by pressing the a button Possible cause Remedy The machine is not connected to the electricity supply and / or is not switched on. Insert the plug in the socket and switch on and / or switch the machine on with the K button.
Opening the drum door in the event of a blocked drain outlet and/or power failure ^ Switch the washing machine off. There is a filter flap opener behind the detergent drawer facia panel.
Once the flow of water ceases: ^ Remove the drain filter completely. ^ Clean the drain filter thoroughly. ^ Remove any foreign objects (e.g. buttons, coins, etc.) and fluff. Turn the impeller by hand to check that it rotates freely. Any foreign object causing an obstruction should be removed.
In the event of any faults which you cannot remedy yourself, please contact: – your Miele Chartered Agent or – the Miele Service Department (see back cover for contact details).
Front view a Inlet hoses with "Waterproof system" for cold water and hot water connection b Electrical connection c - f Flexible drain hose (with detachable swivel elbow) g Facia panel with .
Rear view a Protruding lid for holding when moving the machine b Slot for Miele | home communication module c Electricity supply cable d nlet hose with "Waterproof" system for hot water conn.
Installation surface A concrete floor is the most suitable installation surface for a washing machine, being far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. Please note the following points: ^ The machine must be level and securely positioned.
^ Using the spanner supplied turn the left-hand transit bar 90°, then ^ withdraw the transit bar. ^ Turn the right-hand transit bar 90°, then ^ withdraw the transit bar.
, To avoid the risk of injury the holes for the transit bars must be covered after the transit bars have been removed. ^ Fit the covers on to the two holes. Then plug the holes as shown with the caps. ^ Secure the transit bars to the back of the washing machine.
Levelling the machine The machine must stand perfectly level on all four feet to ensure safe and proper operation. Failure to level the machine can result in the machine "banging" in the spin cycle or "walking" across the floor during operating.
Building under a continuous worktop / in a kitchen run – A special building under conversion kit* is required. The machine lid must be replaced by a cover plate.
The Miele Waterproof system The Miele Waterproof system protects all parts of the washing machine from water damage. The system consists of three main components: 1) the inlet hoses 2) the electronic .
Connection to the water supply , The plastic casing of the safety valve contains electrical components. The Waterproof system must only be connected to its own tap. It must not be connected to mixer taps or similar and must not be fitted in areas where there is the risk of water or other liquids reaching it.
Connection to the water supply The washing machine must always be connected to the mains water supply (inlet hose with blue dots). Cold water connection (mains water supply) The inlet hose with blue dots is used for mains water connection. Hot water connection The inlet hose with red dots is used for connection to the hot water supply.
Connection to the drainage system The machine drains via a drain pump with a delivery head of 1 metre*. The drain hose must not be kinked as this restricts drainage. The swivel elbow at the end of the hose can be turned in either direction, or can be detached if required, with a sharp twist and pull.
Electrical connection The washing machine is supplied with a mains cable with moulded plug for connection to a 230V mains supply. The voltage, rated load and plug rating are given on the data plate. Please ensure these match the household mains supply.
Consumption data for AS/NZS 2040.2:2005 Standard Load Consumption data Energy Water Duration in kWh in litres Normal Cold Water Cottons 40°C 6.5 kg 0.62 52.3 1 h 51 min Notes for test institutes: – Detergent must be despensed via the detergent dispenser drawer.
Consumption with hot water connection (55°C) Load Consumption data Energy Water Duration in kWh in litres Short Normal Cottons 95°C 6.5 kg 1.45 47 1 h 29 min 1 h 53 min 60°C 6.5 kg 0.55 47 40 min 1 h 33 min 60°C 1) 3.0 kg 0.73 39 40 min 40°C 6.5 kg 0.
Height 850 mm Width 595 mm Depth 580 mm Depth with door open 975 mm Height for building under 820 mm Width for building under 600 mm Depth for building under 600 mm Weight 94 kg Capacity 6.
Settings menu ! for changing standard settings The Settings menu is used to alter the washing machine's electronics to suit changing requirements.
To open the Settings menu 1 Cottons 60°C Programme selection ... 2 Minimum iron 40°C Settings ! ... 3 Automatic 40°C 4 Woollens H 30°C 15:00 ^ Select Settings ! from the entry menu and confirm your selection with the multi-function selector. Selecting settings Settings Back A Language ! Time of day.
Time of day First select either a 24 hour or 12 hour clock. Then set the current time of day. To select a 24 hour or 12 hour clock Settings Back A Time of day 24 h clock 12 h clock ^ Select the clock option you want and confirm your selection. The display will then change to the screen for setting the time (of day).
Water plus This setting is used to select the water intake setting for the Water plus extra option. There are three different options: Water + (the machine is delivered with this option selected) The water intake is increased in the wash and rinse stages of the programmes.
Code The code prevents your machine being used without your knowledge. When the code has been activated, you have to enter a code after switching the washing machine on. Otherwise the washing machine cannot be operated. To activate the code Settings Back A Code Activate ^ Select Activate and confirm your selection.
After the last number has been entered, you must confirm the code with OK. 12 5 Confirm lock code OK H Back A H ^ Confirm lock code by pressing short cut button 1 .
Temperature You can chose for the temperature to be displayed in °C/Celsius or °F/Fahrenheit . Buzzer When the buzzer function has been activated, an audible tone sounds at the end of a programme or when Rinse hold is reached.
Standby To save energy, the display goes out and the indicator light for the Start button flashes slowly. The display will always go out, – if a programme is not selected within 10 minutes of the machine being switched on. – 10 minutes after the end of a programme.
The following settings only appear if Communication module XKM 2000 has been fitted to the washing machine. Miele { home This communication enabled washing machine can transmit programme data through the power lines to the Miele | home system. The washing machine must be signed on to the Miele | home system.
If signing on is unsuccessful: ^ Check that the Miele | home system is active. ^ Activate the signing on of a new appliance on the Miele | home system. ^ Repeat the signing on process on the washing machine. Signing off You can sign off the washing machine if you no longer want the programme data to be transmitted.
Remote access This option will be made available in the future. When available it will enable the washing machine to be switched on remotely and monitored using another appliance (e.g. a computer or mobile phone). Your Miele Chartered Agent will be able to tell you when it becomes available.
You have two options: Remote access You can select and start a programme using a mobile phone or computer. ^ Press short cut button 1 . ^ Press the Start button.
Alteration rights reserved/3909 M.-Nr. 07 589 920 / 01.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Miele 6757530 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Miele 6757530 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Miele 6757530 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Miele 6757530 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Miele 6757530, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Miele 6757530.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Miele 6757530. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Miele 6757530 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
