Manuale d’uso / di manutenzione del prodotto MSP-PH2400 del fabbricante Memorex
Vai alla pagina of 40
2.4GHz CORDLESS TELEPHONE MODEL: MSP-PH2400 BEFORE OPERA TING THIS PRODUCT , PLEASE READ THESE INSTRUCTIONS COMPLETEL Y . OPERA TING INSTRUCTIONS ® ＭＳＰ－ＰＨ２４００／０９１７２Ｃ.
CAUTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE. REFER SER VICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOL T AGE: Uninsulated Dangerous V oltage, that may be of sufficient magnitude to constitute a risk of electric shock to persons is present within this product's enclosure.
IMPORT ANT SAFETY PRECAUTIONS (CONTINUED) 5. Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury and serious damage to the product.
IMPORT ANT SAFETY PRECAUTIONS (CONTINUED) SA VE THESE INSTRUCTIONS BA TTER Y PRECAUTIONS T o reduce the risk of fire or injury to persons, read and follow these instructions: 1. Use only the battery pack type provided with the unit. 2. Do not dispose of the battery in a fire, the cell may explode.
IMPORT ANT SAFETY PRECAUTIONS (CONTINUED) The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive REN's on the telephone line may result in the devices not ringing in response to an incoming call.
CONTENTS 5 Important Safety Precautions .......1 Contents..........................................5 Location of Controls .....................6 Installation Instructions.................7 Installation of the Rechargeable Battery .....................
LOCA TION OF CONTROLS 6 HANDSET HANDSET: 1. Display 2. T ALK Button 3. OPTION/SCAN Button 4. Down Button/V olume Down 5. Key Buttons (0-9,*,#) 6. MENU/MUTE Button 7. MEMO/SA VE Button 8. MSG/NEW CALL Indicator 9. Up Button/V olume Up 10. CALL Button 1 1.
INST ALLA TION INSTRUCTIONS 7 1. Carefully unpack and remove your unit from the box. 2. Make sure all the items have been included: Base Unit AC Adapter Handset Unit T elephone Cord Rechargeable Ni-Cd Battery Pack Belt Clip 3. Make sure the Rechargeable Battery is installed or install the Rechargeable Battery as described on the next page.
Remove the battery cover located on the rear of the handset by sliding it downward. If replacing an old battery pack, unplug the battery connector and remove it from the battery compartment. Plug the new battery into the rechargeable battery plug and insert the rechargeable battery into the battery compartment.
9 SET -UP INSTRUCTIONS SETTING THE RINGER This will enable you to turn the ringer On or Of f. 3 1 2 4 5 While in the Standby mode, press a nd hold t he MENU/MUTE button. Press the Key button 1 , or the Up/Down buttons to select the Ringer setting. Press the EDIT/FLASH button .
10 SET -UP INSTRUCTIONS (CONTINUED) SETTING THE LANGUAGE Set the language (ENGLISH, SP ANISH, FRENCH) as follows: 3 1 2 4 5 While in the Standby mode, press a nd hold t he MENU/MUTE button. Press the Key button 2 , or the Up/Down buttons to select the Language setting.
11 SET -UP INSTRUCTIONS (CONTINUED) SETTING THE FIRST RING MODE Y ou can set to turn Off the first ring of the telephone until the caller ID informa- tion has been displayed. 3 1 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button. Press the Key button 3 , or the Up/Down buttons to select the First Ring mode setting.
SET -UP INSTRUCTIONS (CONTINUED) SETTING THE TIME It is necessary to set the internal clock time of the phone to display the time in the Caller ID display when incoming calls are received. If you subscribe to Caller ID, the time and date are automatically set when the first call is received.
13 SET -UP INSTRUCTIONS (CONTINUED) SETTING THE AREA CODE Set the phone to your local area code as described below. If you live in a town with more than one area code, do not enter an area code for this option. 3 1 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button.
14 SET -UP INSTRUCTIONS (CONTINUED) SETTING THE LCD CONTRAST There are three contrast levels for this telephone. Set the level as follows: 3 1 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button. Press the Key button 6 , or the Up/Down buttons to select the LCD Contrast setting.
15 SET -UP INSTRUCTIONS (CONTINUED) SETTING THE PBX NUMBER This telephone enables you to preset the PBX number (such as 8 or 9), while you are using a switchboard system. 3 1 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button. Press the Key button 7 , or the Up/Down buttons to select the PBX Number setting.
SET -UP INSTRUCTIONS (CONTINUED) SETTING THE PBX MODE This telephone enables you to turn the PBX system On or Off, depending on the telephone system being used. 16 3 1 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button. Press the Key button 8 , or the Up/Down buttons to select the PBX Mode setting.
SET -UP INSTRUCTIONS (CONTINUED) SETTING THE P AUSE TIME This telephone enables you to adjust the pause time when placing a call using a switchboard system or dialing long distance calls . 17 3 1 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button.
SET -UP INSTRUCTIONS (CONTINUED) SETTING THE MSG (MESSAGE) W AITING This will enable to you to turn off the Message W aiting Indicator . 18 3 1 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button. Press the Key button 0 , or the Up/Down buttons to select the MSG W aiting setting.
SET -UP INSTRUCTIONS (CONTINUED) SETTING THE AUT O ANSWER MODE This will enable you to turn the auto answer On or Off. In On mode, the telephone will automatically answer an incoming call when the handset is lifted from the base . 19 Press the MENU/MUTE button to exit the program mode.
20 SET -UP INSTRUCTIONS (CONTINUED) SETTING THE PRIV A TE RING MODE Y ou can set to turn On or Off the ring for all calls with blocked Caller ID. 3 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button. Press the Down button twice , or the Up/Down buttons to select the Private Ring mode setting.
21 SET -UP INSTRUCTIONS (CONTINUED) SETTING THE UNA V AILABLE RING MODE Y ou can set to turn On or Off the ring for all calls with unavailble Caller ID information. 2 4 5 While in the Standby mode, press and hold the MENU/MUTE button. Press the Down button once , or the Up/Down buttons to select the Unavailable Ring mode setting.
22 BASIC OPERA TION PLACING A CALL 1 2 After the battery has been fully charged, press the T ALK button and listen for a dial tone; the IN USE indicator on the base will light and “T ALK” as well as the timer will appear on the display. Press the Key buttons (0-9) to dial the phone number you wish to call.
BASIC OPERA TION (CONTINUED) 23 RECEIVING A CALL The last 40 incoming calls are saved in the Caller ID log. Make sure that the Caller ID service is turned on by your phone company. When you receive a call, the display will show the name of the caller, number, time and date of the call.
BASIC OPERA TION (CONTINUED) 24 1 2 T o end a call, simply return the handset to the base, or press the T ALK button on the handset; the IN USE indicator will turn off on the base and “RING: ON” will appear in the display.
25 BASIC OPERA TION (CONTINUED) OUT OF RANGE W ARNING The handset and base communicate up to a maximum range. The distance can be affected by the weather , power lines or other cordless telephones. If you move the handset too far away from the base unit, the handset will beep and the display will show, "OUT RANGE".
BASIC OPERA TION (CONTINUED) 26 1 Press the P AGE button on the base to locate the handset when not in use; the handset will beep for 20 seconds. Press again to end the paging feature. Press the T ALK button on the handset to end paging. 1 Press the EDIT/FLASH button to momentarily hang up.
27 BASIC OPERA TION (CONTINUED) 1 If you are in a Pulse dialing area you may still take advantage of touch-tone services after dialing to respond to touch-tone prompts. T o do this, press the * / button to temporarily change the dialing mode from Pulse to T one after dialing in the Pulse mode.
28 DELETING ONE NAME/NUMBER FROM THE CALLER ID LOG BASIC OPERA TION (CONTINUED) 1 2 Scroll through the calls to select a number to delete by pressing the CALL button followed by the Down button to view the latest calls, or pressing the Up button to start from the first call.
29 BASIC OPERA TION (CONTINUED) 1 2 Scroll through the calls to select a number to dial by pressing the CALL button followed by the Down button to view the latest calls, or pressing the Up button to start from the first call. Press the OPTION button repeatedly until the desired prefixes appear.
30 BASIC OPERA TION (CONTINUED) ADDING A DIRECTOR Y ENTR Y The directory can store up to 20 name/telephone numbers. 1 2 Scroll through the calls to select a number by pressing the CALL button followed by the Down button to view the latest calls, or pressing the Up button to start from the first call.
31 BASIC OPERA TION (CONTINUED) ENTERING A NAME USING THE KEY BUTTONS When entering names into the directory, you must use the Key buttons (0-9,*,#). T o use the buttons to add names, perform the following steps: 1 2 Follow steps one and two on the previous page to program the telephone number.
32 BASIC OPERA TION (CONTINUED) DIALING A NUMBER FROM THE DIRECT OR Y T o select and dial a number from the directory , follow the steps below: 1 2 Press the MEMO/SA VE button. Press the Up or Down button to locate the number you would like to call, then press the T ALK button .
33 PREFERRED CALLS (VIP) Y ou can assign a VIP , which will generate a special second ring. BASIC OPERA TION (CONTINUED) 1 2 Press the MEMO/SA VE button , followed by the Up or Down button to find the desired name/number. Press the MENU/MUTE button ; the display will show the VIP indicator.
BASIC OPERA TION (CONTINUED) EDITING A DIRECT OR Y ENTR Y T o select and edit a name/number from the directory , follow the steps below: 1 2 Press the MEMO/SA VE button , fol- lowed by the Up or Down button to find the desired name/number. Press the EDIT/FLASH button to edit the name.
BASIC OPERA TION (CONTINUED) DELETING ONE NAME/NUMBER FROM THE DIRECT OR Y T o delete a name/number from the directory , follow the steps below: 1 2 While in the Standby mode, press the MEMO/SA VE button , followed by the Up or Down button to find the desired name/number.
TROUBLESHOOTING GUIDE SOLUTION Make sure the telephone line cord is connected properly to the modular wall jack. Make sure the battery pack is properly connected inside the handset. The handset may need recharging, recharge handset. Make sure the charging contacts on both the base and handset are in contact during charging.
CARE AND MAINTENANCE 1. Clean your phone with a damp (never wet) cloth. Solvent or detergent should never be used. 2. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
NOTE: 38 ＭＳＰ－ＰＨ２４００／０９１７２Ｃ（ＥＮＧＬＩＳＨ） 12/16/01, 12:30 PM 39.
39 Memcorp, Inc. Weston, FL Printed in China Visit our website at www .memcorpinc.com 09172C-1 ＭＳＰ－ＰＨ２４００／０９１７２Ｃ（ＥＮＧＬＩＳＨ） 12/16/01, 12:30 PM 40.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Memorex MSP-PH2400 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Memorex MSP-PH2400 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Memorex MSP-PH2400 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Memorex MSP-PH2400 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Memorex MSP-PH2400, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Memorex MSP-PH2400.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Memorex MSP-PH2400. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Memorex MSP-PH2400 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
