Manuale d’uso / di manutenzione del prodotto 61ARMBBOR del fabbricante Marvel Industries
Vai alla pagina of 20
Installation Operation and Maintenance Instructions R efrigerator Models 30ARM 61ARM 3O ARM 6O ARM 6AD AM MARVEL.
1 T ABLE OF CONTENTS Unpacking your refrigerator ........................ ......... ..2 Removing the packaging...................... ............ ..2 W arranty Registration..................... ................. ....2 Installing your refrigerator ....
UNP A CKING Y OUR REFRIGERA T OR 2 Remove P ackaging Y our refrigerator has been packed for shipment with all parts that could be damaged by movement securely fastened. Cut the banding material at the bottom of the carton, unfold the carton at the bottom and remove the carton from the appliance.
INST ALLING Y OUR REFRIGERA T OR 3 Figure 2 Do not splash or spray water from a hose on the re- • frigerator! Doing so may cause an electrical shock, which may result in severe injury or death. This unit should not, under any circumstances, be • ungrounded.
4 USING Y OUR MicroSentry ™ REFRIGERA T OR CONTROL Figure 3 Control Door Switch During initial startup, or anytime power is interrupted, there will be an approximate 5 minute delay before the refrigerator starts.
5 USING Y OUR MicroSentry ™ REFRIGERA T OR CONTROL Alarm Mute Press any key to mute the audible portion of an alarm,. NO TE- This action will only mute the alarm. If the condition that caused the alarm continues, the alarm code will contin- ue to flash and will sound for 20 seconds every 60 minutes.
DIMENSIONS FOR MODELS 30ARM & 3O ARM 14-7/8” (37.78 cm) 21-3/16” (53.82 cm) 34-1/4” to 34-1/2” (87 to 87.6 cm) 23-9/32” (59.13 cm) 25-7/32” (64.06 cm) 37-5/32” (94.39 cm) 16-9/16” (42.06 cm) 6 * Depth dimension may vary depending on each individual installation.
DIMENSIONS FOR MODELS 30ARM WITH O VERLA Y DOOR 14-7/8” (37.78 cm) 34-1/4” to 34-1/2” (87 to 87.6 cm) 37-5/32” (94.39 cm) 23-1/4” (59.06 cm) 22-17/32” (57.23 cm) 21-3/16” (53.82 cm) * Depth dimension may vary depending on each individual installation.
8 R ecommended R ough in Opening Dimensions, Models 6O ARM & 61ARM *24” (61 cm) standard cabinet depth * Depth dimension may vary depending on each individual installation. 34-1/2” (87.6 cm) Electrical Requirements: 115 volts, 3.3 amps running max.
R ecommended R ough in Opening Dimensions, Model 61ARM Overlay Door *24” (61 cm) standard cabinet depth * Depth dimension may vary depending on each individual installation. 34-1/2” (87.6 cm) Electrical Requirements: 115 volts, 3.3 amps running max.
10 *24” (61 cm) standard cabinet depth * Depth dimension may vary depending on each individual installation. 32-1/2” (82.6 cm) Electrical Requirements: 115 volts, 3.3 amps running max. 15 amp dedicated circuit required. 3 prong grounded receptacle required.
*24” (61 cm) standard cabinet depth * Depth dimension may vary depending on each individual installation. 32-1/2” (82.6 cm) Electrical Requirements: 115 volts, 3.3 amps running max. 15 amp dedicated circuit required. 3 prong grounded receptacle required.
12 FULL O VERLA Y P ANEL INST ALLA TION INSTRUCTIONS Step 1: V erify door alignment The door should be parallel to the sides and top of the refrigerator . If alignment is necessary the door may be adjusted by loosening the 2 screws which secure the hinge adapter brackets to the door and adjusting the door side to side.
FULL O VERLA Y P ANEL INST ALLA TION INSTRUCTIONS Step 6: Drill holes in overlay panel Remove the hinge adapter bushings from the top and bottom door hinge adapters. (See Figure 8).Using the holes in the hinge adapters drill 5/16” (8mm) diameter clearance holes into the overlay panels 3/4” (20mm) deep.
14 FULL O VERLA Y P ANEL INST ALLA TION INSTRUCTIONS Step 9: Secure overlay panel to the door . With the #8 wood screws provided fasten the overlay panel to the door . (See Figure 7). Step 10: Install lock cam (Models with locks only). Attach the lock cam to the back of the lock assembly with the phillips head machine screw provided.
Condenser Air Flow The machine compartment located beneath the cabinet does not require frequent cleaning; however , satisfactory performance depends on adequate ventilation. Be sure nothing obstructs the required air flow openings in front of the cabinet.
16 TROUBLESHOO TING Y OUR REFRIGERA T OR Problem P ossible Cause Remedy Unit not cold enough Adjust temperatures (See “Set the de- sired temperature” on page 13) Control set too warm • Airflow to front grille blocked. • Excessive usage or prolonged door • openings.
P arts or Service Not Supplied or Designated by Marvel The above warranties also do not apply if: The original bill of sale, deliver date, or serial number • cannot be verified. Defective parts are not returned for inspection if so • requested by Marvel.
18 APPENDIX A , ADDITIONAL MicroSentry ™ FEA TURES Information Menu: The following features are available on the Information Menu. • CurrentT emperature • MaximumStoredT emperatur.
All specifications and product designs subject to change without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions, replacements or compensation for previously purchased products. www .marvelrefrigeration.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Marvel Industries 61ARMBBOR è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Marvel Industries 61ARMBBOR - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Marvel Industries 61ARMBBOR imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Marvel Industries 61ARMBBOR ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Marvel Industries 61ARMBBOR, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Marvel Industries 61ARMBBOR.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Marvel Industries 61ARMBBOR. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Marvel Industries 61ARMBBOR insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
