Manuale d’uso / di manutenzione del prodotto MDV630R del fabbricante Magnavox
Vai alla pagina of 88
.
Visit our World Wide Web Site at http://www.magnavox.com Return your Warranty Registration card today to ensure you receive all the benefits you're entitled to. Once your MAGNAVOX purchase is registered, you're eligible to receive all the privileges of owning a MAGNAVOX product.
Safety Information Safety Precautions Warning:To prevent fire or shock hazard, do not expose this equipment o rain or moisture. Federal Communications Commission (FCC) Warning: Any unauthorized changes or modifications to this equipment void the user’s authority to operate it.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings.
The remote control MONITOR Monitor : To switch between the internal tuner of the DVD recorder (TV reception) and playback of the DVD recorder STANDBY m Switch on or off : To switch set on or off, interrupt menu function, interrupt a programmed recording (TIMER) TV/DVD TV/DVD : To connect the antenna signal directly to the TV.
O Next title/Chapter/Track/Forward search : Pressing this button once during playback will jump to the next chapter/track. If this button is held down during playback, it will search forward. If button is held down during a still picture function, it will search forward in slow motion.
RECORD LED Recording in progress : Red light in the RECORD button indicates a recording is in progress. OPEN/CLOSE Open/Close disc tray : to open/close disc tray N Previous title/Reverse search O Next title/Forward search h STOP Stop : To stop playback.
IN L AUDIO R Analog audio input (red/white jack) underneath jack IN VIDEO (CVBS) . Audio for jack IN VIDEO (CVBS) : Connection for an additional device (channel number ' EXT2 ') IN AUDIO L R Analog audio input (red/white jack) next to jack IN COMPONENT VIDEO : Connection for an additional device.
DTS A DTS (Digital Theatre System) audio signal is available DD-DIGITAL A Dolby Digital audio signal is available MPEG A MPEG audio signal is available PCM A PCM audio signal is available CHANNEL Channel G Playback in progress. Flashes when Recorder is reading a disc.
Messages on your DVD recorder display READING The following messages may appear on your DVD recorder display. If you name a disc, the disc name will appear on the display panel as well. IS TV ON? The DVD recorder is currently in the initial installation mode.
RECORDING An unauthorized action was attempted during recording (e.g. pressing the OPEN/CLOSE button). FREETITLE The following title is empty. DISC LOCK An attempt was made to record on a protected disc during playback. This message will also appear when an attempt is made to insert a chapter marker( EDIT button).
.
Table of contents A Introduction 13 .................................. Dear Magnavox customer, 13 ........................................................................... Region codes 16 .............................................................
K User preferences 72 .......................... Picture settings 73 ................................................................................................ Sound settings 73 ...................................................................
13 A Introduction Dear Magnavox customer, Instruction manuals are usually very dry since they are technically-oriented and often poorly translated. I have been employed by Magnavox for this reason. Allow me to introduce myself. My name is Phil. I will be guiding you through the instruction manual and try to be of help in operating your new device.
14 Welcome to the large family of Magnavox DVD owners. Thank you for buying a MDV630R/MDV650R . Please take the time to read this owner's manual before using your DVD recorder.
15 Compatible discs Using this DVD recorder, you can play and record on the following discs: Recording and Playback DVD+RW (Digital Versatile Disc + Rewritable); can be recorded on over and over. DVD+R (Digital Versatile Disc + recordable); can be recorded on once.
16 Region codes Because DVDs are not released at the same time in all regions of the world, all DVD players are keyed to a specific region code. Discs can be assigned an optional region code. If the region codes of the player and disc do not match, playback is not possible.
17 Important notes regarding operation Caution! Visible and invisible laser radiation. When open avoid exposure to beam. Because of the danger of eye injury, only qualified service personnel should remove the cover or attempt to service this device.
18 In a cabinet, allow about 2.5 cm (1 inch) of free space around the recorder for adequate ventilation. Make sure that air can circulate freely through the ventilation slots on the machine. Do not place the device on an unsteady base. Make sure that no objects or liquids enter the recorder.
19 Normally, a new recording is made on the current location on the disc. This is the same with video cassettes. However, by holding down REC/OTR n , the new recording will be made after the last recording on the disc. This helps you avoid recording by mistake.
20 B Connecting the DVD recorder Preparing the remote control for operation The remote control and its batteries are packed separately in the original DVD recorder packaging. You must install the batteries in the remote control before use. 1 Take the remote control and the enclosed batteries (2 AA batteries).
21 When you install your DVD recorder for the first time, select one of the following options: 'Connecting with Component Video (Y Cr Cb, YUV) If your TV is equipped with Component Video (Y Cr Cb.
22 Connecting with a Component Video (Y Pb Pr) cable Have the following cables ready: an antenna cable (1 supplied), a power cable (2 supplied), a Component Video (Y PB PR) cable (3, red, green, blue jack) or a corresponding video-compatible cinch cable, an audio cable (4 supplied red/white jack).
23 6 Insert one end of the supplied power cable into the power outlet 4 MAINS at the back of the DVD recorder and the other end into the wall socket. ' IS TV ON? ' will appear on the display. Then, read 'Initial installation' in 'Installing your DVD recorder.
24 6 Insert one end of the supplied power cable into the power outlet 4 MAINS at the back of the DVD recorder and the other end into the wall jack. A message, ' IS TV ON? ' will appear on the Recorder's display to remind you to set your TV to its Audio/Video In channel.
25 6 Insert one end of the supplied power cable into the power outlet 4 MAINS at the back of the DVD recorder and the other end into the wall jack. A message, ' IS TV ON? ' will appear on the Recorder's display to remind you to set your TV to its Audio/Video In channel.
26 How do I switch the Recorder between channel 3 and 4? The factory setting is for channel 3. However, if you would like to switch to channel 4, proceed as follows: 1 Press CHANNEL q while ' IS TV ON? ' is displayed. ' C04 ' (channel 4) will appear on the display.
27 C Connecting additional devices You can connect additional devices such as decoders, satellite receivers, camcorders, etc. to the IN S-VIDEO (Y/C) , IN VIDEO (CVBS) , IN COMPONENT VIDEO jacks on the recorder. You will also use the AUDIO IN jacks of the Recorder for connecting to other devices.
28 Connecting a camcorder to the front jacks The front video and audio jacks can be used to easily connect a camcorder to the DVD recorder. These jacks are behind the door in the lower left corner of the front panel.
29 Connecting audio devices to the digital audio jack The rear of the DVD recorder has a DIGITAL AUDIO OUT jack for a coaxial cable connection. It can be used to connect the following devices: •) a .
30 D Installing your DVD recorder Initial installation After you have successfully connected the DVD recorder and other devices to your TV (as described in the previous chapter), this chapter will help you start the initial installation. The DVD recorder automatically seeks and stores all available TV channels.
31 Initial Setup Subtitle Language English Español Français Português Italiano Press OK to continue 5 Select the desired language for the subtitles by pressing B or A . What is the language of the subtitles? DVD subtitles will be in the selected language if it is available.
32 9 Wait until all available TV channels have been found. This can take several minutes. 10 As soon as the automatic TV channel search is completed, ' Auto ch. search complete ' will appear on the TV screen along with the number of channels found.
33 a Very few TV channels were found b During 'Automatic channel search' the DVD recorder detects whether an antenna or a cable TV signal is connected. If you have connected a cable TV signal but found very few TV channels, you must search the channels manually.
34 10 To remove the menus, press SYSTEM-MENU repeatedly. Setting the language You can select the language for subtitles and audio for DVD playback. Please observe that with some DVDs, you can change the audio language and/or subtitle language only via the DVD disc menu.
35 Switching audio recording (stereo, SAP) Some TV programs broadcast additional audio (SAP - Secondary Audio Program). In most cases this means an additional language is available. For example, if a program is available in English and Spanish, Spanish can be broadcast as the additional audio program (SAP).
36 VCR Plus+ ® Guide channel numbers If you intend to use the VCR+ ® programming system, you must first assign channel numbers to Guide channel numbers. 1 Press SYSTEM-MENU on the remote control. The menu bar will appear in the display. 2 Select ' A ' using D or C .
37 Setting the time/date automatically This function uses the information sent via the local PBS channel to automatically set the time/date. For this reason, you must enter the PBS channel that sends this additional information.
38 Manually setting the time & date If the time is incorrect, this could be due to a weak or disrupted TV signal. If this is the case, switch off the automatic function. 1 Press SYSTEM-MENU on the remote control. The menu bar will appear in the display.
39 E Information on the TV screen You can check/change many functions and settings of your DVD recorder via the system menu bar. The menu bar cannot be displayed during recording. Menu bar icons The SYSTEM-MENU button is used to call up the menu bar (main menu) and to remove it.
40 Field for temporary messages There is a field in the top left corner of the menu bar which displays temporary information regarding different operating functions. This information appears briefly on the screen when certain disc functions are activated.
41 Disc status icons R Recording S Stop T Playing U Pause play V Pause record X Fast forward (x4) Y Fast reverse (x4) Z Slow motion Tuner info box This box appears in the bottom left corner of the TV screen. It displays the current antenna signal and TV channel.
42 F Playback General information regarding playback The DVD recorder can be used with the following systems: •) DVD Video •) Video CD or Super Video CD •) DVD+RW •) DVD+R •) DVD-RW (video m.
43 When playing a DVD+RW, the Index Picture screen appears. Choose the title you want to play with B ,o r A . Confirm with OK . For more information, read 'Playing a DVD+RW or DVD+R'. If Audio/CD playback does not begin automatically, press PLAY/PAUSE G9 .
44 How can I display disc information? 1 Press the DISC-MENU button on the remote control. A menu will appear on the screen. Some films may show a short introductory sequence before displaying the menu. 2 Using A , B , D , C or the number buttons 0..9 select the corresponding option.
45 5 To eject the disc, press OPEN/CLOSE on the front of the DVD recorder. When I play recordings that have been recorded in different recording modes, do I have to change each manually? During playback, the device will automatically switch to the proper mode ' HQ ( HQ ), SP+ ( SP+ ), EP ( EP ), EP+ ( EP+ )'.
46 MP3 CD display If the TV is turned on, the MP3 CD display will appear on the TV screen. During playback, the number of the current track will be shown on the screen and display. During interrupted playback, the number of albums will be shown on the TV and on the CD's display.
47 G Other playback functions Changing to a different chapter track/title When a disc contains more than one track, title, or chapter, you can change to a different track, title or chapter as follows. However, if a title contains several chapters, these are selected.
48 Still picture 1 1 2:04 1 During playback, press PLAY/PAUSE G9 to stop playback and display a still picture. Still picture features via the menu bar 1 While playback is paused, press the SYSTEM-MENU button on the remote control. The menu bar will appear at the top of the screen.
49 Search with time entry Using this function, you can start playing a disc at a specific time. 1 During playback, press the SYSTEM-MENU button on the remote control. The menu bar will appear at the top of the screen. 2 Select ' L ' with C or D and confirm with B .
50 Repeat a specific segment AB You can repeat a specific segment within a title/chapter/track. To do this, you must mark the start and end of the desired segment. 1 During playback, press the PLAY/PAUSE G9 at the desired starting position. sYou will see a still picture.
51 Zoom function Using this function, you can enlarge the video image and pan through the enlarged image. 1 During playback, press PLAY/PAUSE G9 . You will see a still picture. 2 Press the SYSTEM-MENU button and select ' G ' using C . 3 Use B or A to select the desired zoom factor.
52 Changing audio language DVDs sometimes come in different languages. The language used for playback is the one that you selected during initial installation of the Recorder or the default language of the DVD. However, you can change the audio language of a disc at any time.
53 H Recording General information What kind of discs can be used for recording? You can used two different types of DVDs with this DVD recorder: DVD+RW This disc can be recorded on and then erased. DVD+R This disc can only be recorded on once. For this DVD to be played in a DVD player, it must be finalized.
54 Recording without automatic switchoff 1 Switch on the TV and, if required, select the channel number for the DVD recorder (channel 3 or 4 or Audio In channel). 2 Insert a disc to be used for the recording. The system and content of the disc will be checked.
55 5 To start recording, press REC/OTR n on the remote control or RECORD on the DVD recorder. To start the recording after all other recordings on the disc, press and hold the REC/OTR n button until ' SAFE REC ' appears in the display.
56 Pausing recording 1 During recording, press the PLAY/PAUSE G9 button. 2 To continue recording, press REC/OTR n . Ending recording To stop recording, press the STOP h button. Wait until ' MENU UPDT ' disappears from the display before you try another feature.
57 Preventing accidental erasing of discs You can lock the entire disc to prevent important recordings from being erased by accident. You can only lock the entire disc.
58 Lining up recordings within a title (assemble cut) You can add further recordings to a title already contained on a DVD+RW. The new recording will be added to the title as a chapter. Previous information will be overwritten from this location onward.
59 Selecting the recording mode (quality) By selecting a recording mode, you define the picture quality of recordings and the maximum recording time for a disc. You can check the quality by switching to a recording mode watching the picture via the built-in tuner.
60 I Managing disc content Charly 1 00:29:59 • HQ Fr15/02/2002 Empty title 01:30:01 General information When a recording is made on a disc, the following information is saved at the start of each re.
61 Editing recording titles (name) Some TV stations transmit the name of a program. In this case, the name may be included automatically (e.g. 'ROCKY'). Otherwise, the date and time of the recording are stored as the name. The name of the recording can only be changed after the recording has been completed.
62 Deleting recordings/titles You can erase selected recordings from a disc. To do this, proceed as follows: 1 Press STOP h to stop playback if necessary. Settings for title Charly 1 Name Charly 1 Play full title Erase this title Press OK 2 Using A or B to select the title to be deleted then press C .
63 Disc settings Magnavox1 00:35:59 used Fr15/02/2002 NTSC DVD playback This display is located before the first title and contains general information about the inserted disc.
64 Finalize editing If one or more titles have been edited, it is possible that another DVD Player will display the original titles. You can prepare your disc so a DVD player willplay the edited version. 1 Press C in the 'Disc info display'.
65 Erasing DVD+RWs 1 Press C in the 'Disc info display'. The ' Settings for ' menu will appear on the screen. Settings for Magnavox1 Disc name Magnavox1 Protection Unprotected Erase disc Press OK 2 Select Erase disc using A or B and press OK .
66 Splitting titles A title can be split into several parts (titles) no matter how large. Each of these parts (titles) is characterized by its own index picture. Warning! Once a title is split, it cannot be reversed. Can I also divide titles on DVD+Rs? Because recordings on DVD+Rs cannot be overwritten, it is not possible to divide titles.
67 J Programming a recording (TIMER) General information Use programmed recording (TIMER) to automatically start and stop a recording at a later date. The DVD recorder will switch to the right program number and begin recording at the correct time. With this DVD recorder, you can pre-program up to six recordings within a period of one year.
68 5 Confirm with OK . a The following message appears on the screen: ' Please enter channel number ' b The channel number of the TV channel has not yet been assigned Guide. Using C , D or the number buttons 0..9 on the remote control, select the corresponding Guide channel number (name) of the TV channel and confirm with OK .
69 Programming a recording (without VCR Plus+ ® system) 1 Switch on the TV. If required, select the channel number for the DVD recorder (channel 3 or 4 or the Audio/Video In channel). 2 With the Recorder on, press TIMER on the remote control. Timer Timer Programming Date 01/22 Ch.
70 How to check, change, or delete a programmed recording (TIMER) 1 Switch on the TV. If required, select the channel number for the DVD recorder (channel 3 or 4 or the Audio/Video In channel). 2 With the Recorder on, press TIMER on the remote control.
71 Problem solving for programmed recordings PROBLEM SOLUTION DVD recorder does not respond b While a programmed recording is being made, you cannot operate your DVD recorder manually. If you want to cancel the programmed recording, press STANDBY m . ' Switch off, timer recording ' flashes on the TV screen.
72 K User preferences This section explains how to customize the DVD recorder to your preferences. These icons indicate the following: , Picture settings - Sound settings . Language settings / Additional settings 0 Recording settings 1 Installation 1 Switch on the TV.
73 Picture settings You can select the following functions in this menu: Picture TV shape 16:9 Black level shift Off Video shift ï ' TV shape ' The picture signal can be adjusted to fit you.
74 ' Analog output ' You can select from the following settings for devices connected to the analog outputs (AUDIO OUT L/R). Stereo : For devices that use neither DolbySurround nor TruSurround. Only use this setting when the DVD recorder is connected to a stereo TV.
75 Additional settings You can select the following functions in this menu: Features Access control Enter code... Status field On Auto resume On Low power standby Off ' Access control ' Please read the chapter on Child lock.
76 L Child lock Child lock (DVD and VCD) This function can prevent children from viewing discs. When in use, a four-digit code (PIN) must be entered in order to play a disc. In addition, you can set a disc to be played 'always' or 'once' despite the child lock.
77 Authorizing discs 1 Insert a disc. After a short check, the access control menu will appear on the TV screen. 2 Using A or B , select ' Play once 'o r' Play always .' 3 Use the number buttons 0..9 to enter your PIN. Double-sided DVDs can have a unique ID number for each side.
78 Parental control (DVD video only) Movies on DVDs may contain scenes which are not suitable for children. DVDs sometimes come with rating information for the entire DVD or only for certain scenes.
79 Most DVDs apply the rating to an entire DVD. Therefore, if certain scenes exceed the rating you select, the entire disc will be blocked from viewing. Changing the country The Parental Contro levels depend on the country in which the DVD was manufactured.
80 Changing the PIN 1 Switch on the TV. If required, select the channel number for the DVD recorder (channel 3 or 4 or Audio/Video in channel). 2 Turn on the DVD recorder by pressing STANDBY/ON . 3 Press SYSTEM-MENU . The menu bar will appear in the display.
81 M Before you call technical support If you have any problems using this DVD recorder, it may be caused by one of the following reasons. You can also call the customer service center in your country. The telephone numbers are listed in the warranty booklet provided.
82 PROBLEM SOLUTION I cannot playback (Super) Video CDs b It is possible that this (Super) Video CD contains a menu and the 'PBC' is switched off. You can see this in status field ' PBC OFF '. To activate this function, proceed as follows: 1 Press SYSTEM-MENU while the (Super) Video-CD is inserted.
83 PROBLEM SOLUTION A DVD+RW cannot be played on certain DVD players b If a recording is too short, it is possible that a DVD player cannot detect it. Please observe the following 'Minimum record.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province. Magnavox, P.O. Box 520890, Miami, FL 33152, (402) 5364171 EL6554E001 / 03-03 Limited Warranty DVD Recorder One year Free Labor / One year Parts Exchange This product must be carried in for repair.
Rev. HH - 1/9/2003 F ACTORY S ERVICE L OCATIONS NOTE: Magnavox has chosen Philips Factory Service as its preferred, authorized servicer. Please contact a Philips Factory Service Center.
(WwnnNNNwwnnwWNnwNwnNNnwWnnNwnW) 3103 605 20842 3361/000 MDV630R/MDV650R Rev. HH 1/9/2003 F ACTORY S ERVICE L OCATIONS Q UALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! S IMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A F ACTORY S ERVICE C ENTER NEAR YOU.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Magnavox MDV630R è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Magnavox MDV630R - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Magnavox MDV630R imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Magnavox MDV630R ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Magnavox MDV630R, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Magnavox MDV630R.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Magnavox MDV630R. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Magnavox MDV630R insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
