Manuale d’uso / di manutenzione del prodotto MC194EMG del fabbricante Magnavox
Vai alla pagina of 44
MC194EMG COLOR TV WITH BUIL T -IN VCR O WNER ’ S M ANU AL N EED H ELP ?C ALL US ! M A GN A V O X REPRESENT A TIVES ARE READ Y T O HELP YOU WITH ANY Q UESTIONS ABOUT Y OUR NEW PRODUCT .W E C AN GUIDE YOU THROUGH C ONNECTIONS , F IRST - TIME S ETUP , AND ANY OF THE F EA TURES .
Once your MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of own- ing a MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
Introduction 3 Features • Automatic Channel Setup • Automatic Head Cleaner • Automatic Tracking Adjustment • Closed Caption • Daylight-Savings Time • English or Spanish displays and menus .
4 Table of Contents First-time Setup Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before Using the TV/VCR 5 Using the Remote Control ● Point the remote control at the front of the TV/VCR. ● Do not put objects between the remote control and the TV/VCR. TV/VCR Maintenance ● In this TV/VCR, use only tapes with the mark. ● Remove any light adhesive stick-on notes from the videotape before putting the tape in the TV/VCR.
6 Hooking Up the TV/VCR ANT. ANT . ANT. ANT . IN OUT Connect an RF coaxial cable (75-ohm, not supplied) to the OUT Jack on the Cable Box/Satellite Receiver and to the ANT(enna) Jack on the TV/VCR. Connect a Cable TV signal or an antenna to the ANT(enna) Jack.
Hooking Up the TV/VCR (cont ’ d) 7 STOP/EJECT REW PLA Y F.FWD REC/OTR POWER VOLUME CHANNEL VIDEO AUDIO EARPHONE OUT IN VIDEO IN OUT 3CH 4CH AUDIO ANT. OUT IN VIDEO IN OUT 3CH 4CH AUDIO ANT. VIDEO AUDIO • Audio and video cables are not supplied. If your VCR, Camcorder, or DVD Player has red and white audio jacks, connect only the white jacks.
8 Setting TV Channels for the First Time The TV/VCR can memorize the channels you receive in your area. If you are using a Cable Box or Satellite Receiver, you do not need to set channels at the TV/VCR. Set the TV/VCR to the output channel of the Cable Box or Satellite Receiver (channel 03 or 04).
Playing a Videotape 9 • If the tape you want to play is already in the TV/VCR, turn on the TV/VCR power, then press PLAY/ ▲ . • Playback features and options are on pages 28-31. • When you play an S-VHS format tape, you cannot get the high resolution that would be avail- able on an S-VHS VCR.
10 Recording • You cannot record one channel while watching another. • Recording options are on pages 22-27. • If you pause a recording for more than five minutes, the TV/VCR will resume recording automatically.
TIME SEARCH MUTE RECORD SPEED RESET 0 8 9 7 5 6 4 2 3 1 PAUSE/STILL + 100 STOP F.FWD PLAY REW VOL. DISPLAY MENU POWER SLEEP/WAKE UP CH. ALT.CH SLOW F.FWD/ B (fast forward) Button When tape playback is stopped, press to fast forward the tape at high speed.
12 Front Panel STOP/EJECT REW PLAY F.FWD REC/OTR POWER VOLUME CHANNEL VIDEO AUDIO EARPHONE Cassette Compartment Insert a videotape here. POWER Button Press to turn the TV/VCR on or off. Turn off the TV/VCR for a timer recording. VOLUME o / p Buttons Press to adjust the sound level.
Rear Panel 13 ANT . ANT(enna) Jack Connect your antenna or Cable TV signal here. Details are on page six. Antenna Hole Connect the stem of an indoor rod antenna here. Details are on page six. AC Power Cord Connect to a standard AC outlet to supply power to the TV/VCR.
14 Menu Language, Resetting TV Channels • If the menu is in Spanish but you prefer English, press MENU, then press PLAY/ ▲ or STOP/ ▼ to select IDIOMA ESPA Ñ OL, then press F.FWD/ B to select ENGLISH. Press MENU to remove the menu. • The TV/VCR cannot control or change the channels of a Cable Box or Satellite Receiver.
Adding/Deleting Channels 15 The channels you no longer receive or seldom watch can be deleted from the memory. (Or, you can add new channels into the memory without having to reset all the channels.) 1 Press MENU. Press PLAY/ ▲ or STOP/ ▼ to select CHANNEL SET UP.
16 Setting the Clock 1 Press MENU. Press PLAY/ ▲ or STOP/ ▼ to select SETTING CLOCK, then press F.FWD/ B . 2 With AUTO CLOCK selected, press F.FWD/ B or REW/ s repeatedly until ON appears beside AUTO CLOCK. • If the TV/VCR is connected to a Cable Box or Satellite Receiver, select the PBS channel on the Cable Box.
Setting the Clock (cont ’ d) 17 • If the TV/VCR sets the time incor- rectly, it may have taken the time from a PBS channel in a different time zone. Follow the steps for Manual Clock Setting on pages 18-19. • If no channel numbers appear during the channel search at step 3, there are no stations in your area that contain the time signal.
18 Setting the Clock (cont ’ d) Manual Clock Setting 1 Press MENU. Press PLAY/ ▲ or STOP/ ▼ to select SETTING CLOCK. Then, press F.FWD/ B . 2 Press PLAY/ ▲ or STOP/ ▼ to select MANUAL CLOCK SET. Then, press F.FWD/ B . 3 While the MONTH space is flashing, press PLAY/ ▲ or STOP/ ▼ until your desired month appears.
Setting the Clock (cont ’ d) 19 5 While the YEAR space is flashing, press PLAY/ ▲ or STOP/ ▼ until your desired year appears. (Example: 2003) The day of the week (Tuesday - TUE, etc.) will change appropriately for the year you select. Then, press F.
20 Daylight-Savings Time When Daylight-Savings Time (D.S.T.) is ON, the TV/VCR clock will automatically move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. To turn Daylight-Savings Time ON or OFF, follow the steps below.
Status Displays, Picture Control 21 Picture Control Follow these steps to adjust the TV/VCR ’ s brightness, color, tint, sharpness, and contrast. 1 Press MENU. Press PLAY/ ▲ or STOP/ ▼ to select PICTURE CONTROL. Press F.FWD/ B . 2 Within five seconds, press PLAY/ ▲ or STOP/ ▼ to select BRIGHT, SHARPNESS, TINT, COLOR, or CONTRAST.
4 The current date will be flashing in the DATE space. For a one-time recording, press PLAY/ ▲ to select the date you want to record. To record a TV program at the same time on the same channel every day, press STOP/ ▼ until EVRY DAY appears.
Timer Recording (cont ’ d) 23 6 Press PLAY/ ▲ or STOP/ ▼ until the beginning minute appears. Then, press F.FWD/ B . 5 Press PLAY/ ▲ or STOP/ ▼ until the beginning hour and AM or PM appears. Press F.FWD/ B . • Tape speed details are on page 10.
24 Timer Recording (cont ’ d) Extending a Timer Recording To make a Timer Recording start and end later than originally sched- uled, follow these steps. 1 With the TV/VCR power on, press MENU. Press PLAY/ ▲ or STOP/ ▼ to select TIMER PROGRAMMING.
Timer Recording Auto Return 25 Turning on AUTO RETURN sets the TV/VCR to rewind the tape automatically to the beginning of a timer recording. 1 Press MENU. Press PLAY/ ▲ or STOP/ ▼ to select USER ’ S SET UP. Then, press F.FWD/ B . 2 Press PLAY/ ▲ or STOP/ ▼ to select AUTO RETURN.
26 Rerecording (Tape Duplication) • Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws. • Different brands of equipment may operate differently.
One-Touch Recording 27 A One-Touch Recording (OTR) is an immediate timed recording from 30 minutes to eight hours long. ● This function cannot be done from the remote control. ● Recording starts immediately when you press REC/OTR. Before you begin, make sure .
28 Playback Options • Still and Slow modes will switch to Stop mode after five minutes to protect the TV/VCR and the tape from damage. • SP/LP/SLP means this feature will work with tape segments recorded in Standard Play, Long Play, or Super Long Play.
Repeat Play 29 • Once you set Repeat Play, it stays in effect even after you turn off the TV/VCR. You must set it to OFF to disable it again. • If RENTAL is ON, the RENTAL PLAY B message has priority when you start playback. (REPEAT PLAY B will not appear when you start play- back.
30 Rental Playback, Zero Return Rental Playback This function improves the picture quality of worn videotapes. 1 Press MENU. Press PLAY/ ▲ or STOP/ ▼ to select USER ’ S SET UP. Then, press F.FWD/ B . 2 Press PLAY/ ▲ or STOP/ ▼ to select RENTAL.
0 8 9 7 5 6 4 2 3 1 + 100 STOP F.FWD PLAY REW VOL. DISPLAY M E N U POWER SLEEP/WAKE UP CH. A LT .C H Time Search Time Search lets you rewind or fast forward a tape to a posi- tion by entering the amount of time you want to skip. Time Search is not available during recording.
32 Setting V-Chip V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited m.
Setting V-Chip (cont ’ d) 33 If you select TV-Y7, TV-PG, TV-14, or TV-MA, then press F.FWD/ B to select BLOCK, the selected cate- gory ’ s subratings will appear. Press F.FWD/ B again to go to the next menu and set each subrating to BLOCK or VIEW.
34 Setting V-Chip (cont ’ d) MPAA Rating Settings 1 Press MENU. Press PLAY/ ▲ or STOP/ ▼ to select V-CHIP SET UP. Then, press F.FWD/ B . 2 Press PLAY/ ▲ or STOP/ ▼ to select MPAA RATING. Then, press F.FWD/ B . 3 Press PLAY/ ▲ or STOP/ ▼ to select a rating.
Closed Caption 35 Follow the steps below to select closed captions for TV pro- gramming. Not all TV programs and commercials have closed captions or all types of closed captions (second language, half-screen text, etc.). If closed captioning is not broadcast, you cannot receive it.
2 Press F.FWD/ B or REW/ s until ON appears. 3 Press PLAY/ ▲ or STOP/ ▼ to select TV/TAPE. Press F.FWD/ B or REW/ s to select TV or TAPE. If you select TV, the current TV channel will be on when the TV/VCR turns on. Select TAPE to start tape playback when the TV/VCR turns on.
Sleep Timer 37 Use the Sleep Timer to program the TV/VCR to shut itself off in a certain amount of time. 1 Press SLEEP/WAKE UP until SLEEP TIMER appears. 2 Press PLAY/ ▲ , STOP/ ▼ , F.FWD/ B or REW/ s until your desired sleep time appears. You may choose 30 minutes, one hour, an hour and a half, or two hours.
38 Automatic Operation Features Automatic Playback When you put a tape in the TV/VCR, the power will come on automatically. If the tape ’ s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automatically when you insert a tape with the record tab intact.
AUDIO In Jack: jack on the front of the TV/VCR that receives audio from other equipment. Automatic Channel Setup: process in which the TV/VCR memorizes all available channels. Then, when you push the CH(annel) ▲ / ▼ button, you only scan through channels you receive.
40 Helpful Hints Location For safe operation and satisfactory performance of your TV/VCR, remember the following: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation.
Helpful Hints (cont ’ d) 41 The remote control is not available and you need to access the menu. • Press CHANNEL ▲ or ▼ on the front of the TV/VCR to go to channel zero or AUX. Press CHANNEL ▲ once to access the TV/VCR menu. Use the PLAY, REW, F.
General CRT: 19-inch in line gun Television system: NTSC Closed caption system: Section 15.119, FCC (Federal Communications Commission) Standard Video Heads: Two heads Tape width: 1/2 inch (12.65 mm) Tape speed SP: 33.35 mm/sec. LP: 16.67 mm/sec. SLP: 11.
Limited Warranty 43 WHO IS COVERED? You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. WHAT IS COVERED? Warranty coverage begins the day you buy your product.
alt.ch button . . . . . . . . . . . . . .11 ant(enna) jack . . . . . . . . . . .6, 13 audio in jack . . . . . . . . .7, 12, 26 auto return . . . . . . . . . . . . . . .25 automatic playback . . . . . . . . . . . . . . .38 rewind . . . . . . . . . . . .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Magnavox MC194EMG è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Magnavox MC194EMG - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Magnavox MC194EMG imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Magnavox MC194EMG ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Magnavox MC194EMG, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Magnavox MC194EMG.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Magnavox MC194EMG. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Magnavox MC194EMG insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
