Manuale d’uso / di manutenzione del prodotto 32612MHD del fabbricante Magnasonic
Vai alla pagina of 25
1-800-663 -5954 For Customer A ssistance Call: 32” High Definition* LCD Television 32612MHD Instruction Manual *Requires HD Sig nal Thank you for your pu rchase of this Magnasonic product. Ple ase read this Instruct ion Manual carefully before using pr oduct to ensure proper us e.
CONTENTS 2. Descriptions of Main Unit and Rem ote -Co ntrol Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1. Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. Safety W arnings and Cautions W arning Do not remove the cabinet back from your set. Refer servicing to a qualified service technician. High voltages are used in the operation of this product. W arning T o prevent fire or risk of electric shock, do not expose the main unit to rain or moisture.
Minimum 10c 20c 10c 5cm ! Caution If the television is to be built into a compartme nt or enclosure, the minimum distances must be maintained to allow for proper ventilation. Heat build-up can reduce the service life of your television, and can also be dangerous.
Caution ! When the product is not used for an extended period of time, it is advisable to disconnect the AC power cord from ! A void exposing the main unit to direct sunlight or other source of the heat. Do not stand the television receiver directly on other products which give of f heat, E.
2. Descriptions of Main Unit and Remote-Control Unit 2.1 Main Unit Buttons / Display: Sockets / Main Power Switch: 5.
2.2 Remote-Control Unit 6.
3. Specifications Items Relevant illustrations Active Screen Size 32 inches Screen format 16:9 Number of Pixels 1366×768 T ypical Contrast Ratio 1000:1 Maximum Brightness 500 cd/m² Display colors 16.7M Wide Viewing Angle 170 ° (Horizontal) 170 ° (V ertical) S tandard FCC etc.
.
4. Connection and Prep aration 4.1 Connecting Antenna or Video Facility 1. Use a 75 Ω coaxial cable or 300-75 Ω impedance converter (sold separately) to plug in the antenna input terminal on the rear of the cabinet. 2. Connect the video or audio facility with the video, audio interface on the rear of the cabinet.
4.4 Auto Search the Channels 1. Press the Power On/Off key on the tele vision or the Remote-Control. 2. Press the MENU key on the remote-control unit. The screen displays the Menu OSD. Press the key repeatedly till “TV -CHANNEL” is highlighted in the first main menu.
5.3 TV/A V TV AV SVIDEO YPBPR YPBPR2 HDMI PC 5.4 Channel Up/Down 5.5 Volume Control 5.6 Closed Caption Press CH ▲ or the ▲ key to change Channel Up Press CH ▼ or the ▼ key to change Channel Down Press the VOL + or VOL - or the keys to lower or raise the volume.
5.7 QV Pressing this will quickly swit ched back to the previous channel viewed. 5.8 SCAN Pressing this button will automatic ally scan through the channels. Pressing this button again will stop scan. 5.9 ZOOM Press this key repeatedly to change aspect radio as follows.
5.12 OK The OK key is used to confirm your selection in the menu ， and let you quickly enter the result. 5.13 Picture Mode Press repeatedly to select the picture mode among ST ANDARD, DYNAMIC, SOFT , and PERSONAL. ST ANDARD → DYNA MIC → SOFT → PERSONAL 5.
5.16 CALL 5.17 FREEZE 5.18 BTSC Press it repeatedly to switch among Mono, S tereo and SAP . Press to hold the current state or image. Pressing again releases back to normal state. Pressing displays (1) the name of current t he program or source; (2) Current aspect rati o; (3) Current mts mode; (4) Current picture mode; (5) Current sleep time.
7. MENU OPERA T ION AND FUNCTION DESCRIPTIONS: 7.1. Menu operation under TV , A V , SVIDEO, YPBPR. 7.1.1 PICTURE MENU ： a. The above image is a sample of the display menu. b. The definition of each option: b.1 PICTURE MODE: Set the picture preset to ST ANDARD → DYNAMIC → SOFT → PERSONAL → ST ANDARD by using the keys.
b.6 SHARPNESS: Change the value of the sharpness with the keys, in the range of 0 to 100. b.7 COLOR TONE: Set the color temperature preset to ST ANDARD → WA R M → COOL → ST ANDARD by using the keys. b.8 SCALE: Set the picture size preset to FULL → ZOOM → 4 ： 3 → PA N O R A M A → FULL by using the keys.
b.3 TREBLE: Change the value of the treble with the keys in the rang of 0 to 100. b.4 BALANCE: Change the value of the balance with the keys from -50 to 50. Recommended setting is 0. b.5 MTS: Set the modes of sound processing with the keys to MONO → STEREO → SAP .
b.4 VCHIP: Press the key to enter the password input menu, now enter your password to enter V -CHIP mode. V -CHIP has two American standards (MP AA Rating/ TV Parental Guidelines) and two Canadian standards (Englis h Rating/ French Rating). b.4.1 CHANGE P ASSWORD: Press the keys to enter the password change menu.
b.4.4 MOVIE RA TING: Press the keys to adjust the movie rating to NONE Æ G Æ PG Æ PG13 Æ R Æ NC17 Æ X Æ NONE. G General Audiences PG Parental Guidelines Suggested PG － 13 Parents Strongly Cautioned R Restricted NC － 17 No 17 And Under Admitted X b.
7.1.4. SYSTEM MENU ： SYSTEM MENU a. The above image is a sample of the display menu. b. The definition of each option: b.1 OSD LANGUAGE: Change the language to ENGLISH → FRENCH → POR TUGUESE → SP ANISH → ENGLI SH by using the keys.
b.7 OSD HALFT ONE ： Change the transpa rence of the OSD (it has 9 grades) by using the keys. 7.1.5. CHANNEL MENU ： Only displayed when current source is TV . CHANNEL MENU a. The above image is a sample of the display menu. b. The definition of each option: b.
7.2. MENU UNDER THE SOURCE OF VGA ： 1 . When the system signal source switches to VGA ， there will be a PC mark in the up-right corner of the screen. 2 . In VGA Input Mode ， if there is no signal ， it will dis play NO SY NC in the middle of the screen.
8. T rouble Shooting ： Before arranging for service, first know t he status and then check simply as follows: Problems Check No picture. Check if the power supply is plugged in. Picture is fine, but no audio. Check if the volume control is set to the minimum or mute position.
24.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Magnasonic 32612MHD è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Magnasonic 32612MHD - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Magnasonic 32612MHD imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Magnasonic 32612MHD ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Magnasonic 32612MHD, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Magnasonic 32612MHD.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Magnasonic 32612MHD. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Magnasonic 32612MHD insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
