Manuale d’uso / di manutenzione del prodotto DGN209 del fabbricante LOREX Technology
Vai alla pagina of 52
Copyright © 2006 LOREX Technology Inc. 9 CHANNEL MULTIPLEX DIGITAL VIDEO RECORDER Instruction Manual English Version1.0 MODEL: DGN209 www.lorexcctv.com.
2 Under the copyright laws, this documentation may not be c opi ed, photocopied, reproduced, translated, or reduc ed to any electronic medium or machine-readabl e form, in whole or part without the prior written consent of Lorex Technologies Inc., except in the manner describ ed in the documentatio n.
3 Table of Contents Important Safety Instru ctions.................................................................................................. ...................................................... 5 Introduc tion ...............................
4 Appendix 1: Inst alling t he HDD ................................................................................................. ................................................. 45 Appendix 2: Connection Diagr am to Camera s and Moni tor ........
5 Important Safety Instructions All the safety and operating instructions sho uld be read befo re operating this equipment. T he improper operation ma y cause irreparable damage to the a ppliance. Lift and place this equipm ent gently. Do not expose this equipment to direct sunlight.
6 Introduction The DXR209 combi nes a 9 channel multiplexer with a Digital Video Record er (DVR). The DVR offers many advantages over traditiona l time lapse VCR’s, allo wing you to quickly access and search for a sp ecific time segment or event, which has been recorded.
7 System Contents The DXR209 box s hould include the items listed bel ow. Please ta ke a moment to verify that no items are missing from the package. NOTE: KEEP THE KEYS IN A SAFE PLACE. THEY A RE NECESSARY FOR INSTALLATION / REMOVAL OF THE HARD DISK DRIVE.
8 Front Panel Controls 1. REMOVABLE HDD CARTRIDGE Please refer to Appendix #1. 2. LED INDICATORS These LED Lights are ON under the follo wing conditions: • HDD Full: HDD is full • ALARM: If you want to turn off the ALARM LED light, please refer to page 13 and set the Camera / ALARM item as OFF (all of the cameras should be set as OFF.
9 UP: When in the setup mode, it works as an Up directional button. 15. PLAY Press PLAY to playback the most recently recorded vid eo. 16. REW / Left REW: Under DVR play mode, it can play video b ackward at differ ent speeds.
10 Back Panel Connections 1. POWER INPUT Connects to the Power cord. 2. EXTERNAL I/O Connects to a PC for Remote Control via RS-232 or to an Alarm Block. (see Appendix #3 for more info) 3. 75/HI When using the LOOP function, allo ws for HI impedance or 75ohms.
11 Accessing the Main Menu The Menu allows you to confi gure your DVR settings and p rogram various recording options. Follow these steps in order to access the Menu: Press the MENU button. The password screen will appear: The default Passw ord is 0000.
12 ► M 2002-JAN-01 01:02:03 M- HDD M 2002-JAN-01 01:02:03 M- HDD A 2002-JAN-01 01:02:03 M-HDD T 2002-JAN-01 01:02:03 M-HDD D 2002-JAN-01 01:02:03 S-HDD M 2002-JAN-01 01:02:03 S-HDD ◄ : Page Up ► : Page Down The following options are ava ilable in the Search Menu: Last Record This feature is used to play the last recorded piece of vid eo.
13 Timer Recording Setup On the Main Menu, selecting the Timer optio n will allow you to set dail y schedules in which you would like the DVR to aut omatically record. Pressing ENTER after scrolling to the Timer option will bring up the following menu opti ons: Timer 1.
14 Record Settings On the Main menu, selecting the Record opti on wi ll allow you to set the qualit y and speed of recordings. Pressing ENTER after scrolling to the Record option will bring up the following m enu options: HDD Over w rite Setup 1. Press ENTER to confirm HDD OVERWRITE setup.
15 Motion Trigger Record 1. Press ENTER to confirm MOTION TRIGGER RECORD setup. 2. Press ▲ / ▼ to toggle the option between ON and OFF. 1. Select “ ON ” to set up the motion trigger recording: It can automatic ally switch from stand-by mode to Re cording Mode.
16 Record Method This feature is used to select the DVR record method as either EVENT / NORMAL / OFF. 1. Press ▲ / ▼ to select the desired time camera channel (1-9), then press ENTER . 2. Press ◄ / ► to select the Record Method feature on the screen.
17 Motion Detection The Motion Detect feature provides a vis ual indication on the moni tor when movement is detected in the picture. Also, if the ‘Motion Trigger Record’ optio n is enabled in the ‘Record’ me nu, recording will activate on all cam eras when motion is detected.
18 Figure 1-1 MOTION DETECTION SETUP – 1~ 9 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 032 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Figure 1-2 MOTION DETECTION SETUP – LINE 1 2 3 4 5 6 7 8 9 10 11 12.
19 System Setup The System menu is used to configure t he s ystem level options on the DXR209. To access the System features, press MENU followed by the 4-digit password. Use the ▲ / ▼ to scroll to the ‘System’ option and press ENTER . Using the ▲ / ▼ buttons, scroll to the desired option and press ENTER to select it.
20 4. Press ▲ / ▼ to move to another field on the System screen or press MENU to exit. Setting the Motion Audible Alarm feature If enabled, the buzzer will sound if the video Motion Detect Feature is set and motion is detected. 1. On the System screen, press ▲ / ▼ to select Motion Audible Alarm, then pr ess ENTER .
21 D-M-Y = Day - Month - Year Off = The date and time will not show on the screen. 3. Press MENU to confirm your change. 4. Press ▲ / ▼ to move to another field on the System screen or press MENU to exit this screen and confirm the current operation.
22 (Menu) Search Timer Record Camera Sy stem ► Event Network (Menu) Search Timer Record Camera Sy stem Event ► Network (Network) SERVER IP 192.168.
23 HDD Status – This will display eit her the remaining HDD c apacity in GB or OW to indicate that it is set to Overwrite. Video Loss - Screen w ill display if the video input is not connect ed properly. Recording Methods The DXR209 offers a variet y of flexible recording modes.
24 Video Search The DVR allows you to easily find sections of recorded vide o using the Search feature. Press the SEARCH button and you will see the following opt ions: Last Record: Plays the last recorded piece of video. Full List: Shows a listing of all recorded video on the HDD, sorted b y time.
25 Hardware Connection from DVR Static IP Setting 1. Put the attached CD into the CD-ROM. The application program will install on your PC. Note: The CD contains a self-running insta llation that automatically starts when the CD is inserted. Follow the instructions for in stallation as indicated in the next fe w pages.
26 3. Choose the destination loc ation and press “Next”. 4. Set the program shortcut setting and press “Next”. 5. Press “Next” to begin copying the files.
27 6. After the installation, the following f iles listed belo w will appear in your assigned p ath or file folder. There will be 6 f iles and 1 folder. STEP 2: STATIC IP SETTING In the DVR MENU / NETWORK set the IP ADDRESS, GATEWAY, NET MASK, DNS and WEB POR T as provided from your local ISP (internet service provider).
28 Dynamic IP Setting WHAT IS A DYNA MIC IP ADDRESS? A Dynamic IP Address is an IP (Internet Protocol) address that changes each time you connect to the internet. T his cuts down on the number of IP addresses large consum er provi ders need because no t all of their customers are using the service at an y given time.
29 4. After registering your account, you will receive an e-mail, which contains instructions to activate yo ur account. If you do not follow these directions within 48 hours, yo u will need to re-register your account. 5. Login your account. 6. Click on “Account” and “Add Host” 7.
30 2. Network setting for PC. (The instruction is based on Wi n XP O/S. If your O/S is Win 2000 or Win 2003, the setup procedure is similar to that of Win XP O/S.) 3. Click on “Properties” for TCP/IP setup. 4. Click on “INTERNET PROT OCOL (TCP/IP)” and then select “Properties” to setup.
31 5. Choose “Obtain an IP address automatically”. 6. Enter the “Command Prompt”. 7. In the setting window, enter “ ipconfig” , and write down the router’s gate way (e.g. 192.168.1.1). 8. Close the window above. Enter the IP add ress (router’s gate way: 192.
32 STEP 4: ROUTER SETTING (Please refer to your Router manual for t he configuration ) NOTE: In the router setting, t here are four steps to follow: 1. Dial setting 2. DHCP setting 3. Virtual server setting 4. DDNS setting 1. Click on “INTERNET PORT” and choos e your WAN type (e.
33 3. In the “ADVANCED SETUP / Virtual Server”. Choose “By Port” and set the “Port Number” to 80 for the Video Web Server. Set the “Local Server IP Address” to 192.168.1.10. (The default Video Web Server IP and port). Press add & save aft er you set up.
34 STEP 7 : Connect to the DVR via the In tern et 1. Change PC net work setting to the original setting and link PC to the internet . 2. Click twice and enter your User name, Pass w o rd and host on the Video Web S erver. (Note: If you did not change the “Account” , the User Name and Password are both “admin”.
35 Software Operation at the Remote Site Follow the steps below to connect to a remote site. (e.g. If y ou set up the server at your office with one static ADSL, you c an remotely watch the video anywhere, with a networkable computer.) Step 1: Click tw ic e to enter the Login setup (pleas e refer to “software installation”).
36 Control Panel and Basic Operation A. Video Web Se rver control panel 1. Image transmission rate per second. 2. Data transmission rate. 3. Connection/Disconnection. 4. Resolution: D1,CIF 5. Image quality: High, Middle , Low. 6. Image adjusting: Brightness/ Contrast/ Saturation.
37 B. Digital dev ice control panel 1. CH1-9 2. 4cut, 7cut, 9cut, PIP 3. Zoom, Select, Lock, Record 4. Stop, Rewind, Fast Forward, Pause, Slow, Play 5. Menu (Exit), Left, Right, Up, Down 6. Enter 7. TURBO* Play Back Operation You will find the recorded file on the PC.
38 Advanced Settings Click on “System Config” for advanced settin g. ACCOUN T AL AR M SYSTEM CONFIG NOTE : Apply-- After changing all setting, press “appl y” to refresh the data. Reboot-- Press this button to restart setting. Set up the user’s account (Max 10 accounts), password and author ity (Max 5 accounts on line at the same time).
39 MA IL FTP FILE PATH When the alarm is triggered, the video serve r program will capture the inst ant picture and e-mail the captured image to the assigned reci pients. 1. Get all the data from the ISP company or by mailing it to the server supplier.
40 TOOL BOX ONLINE USER Connecting the Video Web Server Via the Internet Explorer Browser You can also connect to the Video Web Serv er via the Internet Explorer bro wser. This function is suitable for both WIN 2000 and WIN XP (WIN XP is preferable over W IN 2000).
41 Step 2: Enter your Username and Pass word to login to the Video Web S erver. Step 3 : Click on “YES” to confirm that the Download Application is authenti c and has been verified.
42 Step 4: After you login, you will see the Video Web Server screen (e xample below). Key Lock For added security, you can L ock the buttons on your DXR2 09. Lo cking disables the functiona lity of the buttons and prevents accidental key presses from altering the oper ation of the DXR209.
43 Troubleshooting Check that the HDD has been install ed correctly. No recorded video Check camera’s video cables and co nnections. Check monitor’s video cables and conn ections. Make sure that the camera is receiving power. No video Check that Timer / Alarm Enable is set to YES.
44 Technical Specifications Video format NTSC/EIA or PAL/CCIR Network Interface Ethernet (10100 Base-T) Protocols TCPIP, ICMP, SMTP, HTTP, FTP Triggers & Actions E-mail images or images uplo aded .
45 Appendix 1: Inst alling the HDD NOTE: The HDD has the same purpose in a D XR209 as a videocasse tte does in a VCR. However, installing the HDD is a bit more complicated. Please foll ow the next steps ca refully in order to ensure proper i nstallation.
46 B (unlocked) A (locked) Step 6: Secure the HDD in the Cartridge Casing. Position the HDD into place and sec ure it using the six scre ws supplied. Step 7: Slide the top Co ver over the Cartridge Casing. Slide the Cover forward over t he Cartridge Case.
47 Appendix 2: Connection Diagra m to Cameras and Monitor EXTERNAL I/O POWER 75Ω 2 CALL LOOP INPUT RISK OF ELECTRI C SHOCK D O NOT OPEN WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT RE MOVE COVER (OR BACK). NO USER-SER VICEABLE PARTS INSIDE.
48 Appendix 3: Pin Configurations 25 Pin Com Port EXTERNAL ALAM NO EXTERNAL ALARM COM PIN OFF ALARM INPUT 9 ALARM INPUT 10 ALARM INPUT 11 ALARM INPUT 12 ALARM INPUT 13 ALARM INPUT 14 ALARM INPUT 15 AL.
49 Appendix 4: Rack Mount Installation Screws and brackets for rack mounting appl icat ions can be purchased as an optional accessor y. Front Angle with Rack Mount (Optional) Side View with Rack Mount (Optional) For more information about the rack mount & other accessories through Lorex, please visit: www.
50 Appendix 5: Recordi ng Times (in Hours) NTSC SYSTEM IPS 25A 15 8 4 2 1 Best 16hr 32hr 60hr 120hr 240hr 480hr High 20hr 40hr 75hr 150h r 300hr 600hr Normal 32hr 64hr 120h r 240hr 480hr 960hr Record .
51 Appendix 6: Compatible HDD Brands Manufacturer Model C a p acit y Ro tati on HITAC HI Deskstar 180 GX P ( 120 GB ) 120G B 7200 rpm HITAC HI Deskstar 7K250, HD S722516VLA T20 160G B 7200rpm HITAC HI.
52 It’s all on the web Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades www.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il LOREX Technology DGN209 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del LOREX Technology DGN209 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso LOREX Technology DGN209 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul LOREX Technology DGN209 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il LOREX Technology DGN209, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del LOREX Technology DGN209.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il LOREX Technology DGN209. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo LOREX Technology DGN209 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
