Manuale d’uso / di manutenzione del prodotto 1080 del fabbricante Lopi
Vai alla pagina of 24
1080 C F F ir ep lace • Operation • Maintenance Tested and Listed by OMNI-Test Laboratories, Inc. Beaverton, Oregon Report # 028-F-81-5 ANSI Z21.88a-2007 WARNING: I f the information in these instructions is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life.
2 Introduction © Travis Industries 4070710 100-01194_000 Introduction We welcome you as a new owner of a 1080 CF gas fireplace. This manual details operation and maintenance of this fireplace. Please familiarize yourself with the Owner's Manual before operating your heater and save the manual for future reference.
Introduction 3 © Travis Industries 4070710 100-01194_000 Table of Contents Introduction and Important Information Introduction ............................................................. 2 Important Information .....................................
4 Safety Precautions © Travis Industries 4070710 100-01194_000 IF YOU SMELL GAS: * Do not light any appliance * Extinguish any open flame * Do not touch any electrical switch or plug or unplug anythi.
Safety Precautions 5 © Travis Industries 4070710 100-01194_000 Do not place clothin g or other flammable items on or near the heater. Because this heater can be controlled by a thermostat there is a possibility of the heater turning on and igniting any items placed on or near it.
6 Operation © Travis Industries 4070710 100-01194_000 Before You Begin Read this entire manual before you use your new fireplace (especially the section "Safety Precautions" on pages 4 & 5). Failure to follow the instructions may result in property damage, bodily injury, or even death.
Operation 7 © Travis Industries 4070710 100-01194_000 The Two Modes of Operation This fireplace uses both a wall switch and thermostat to control the fireplace.
8 Operation © Travis Industries 4070710 100-01194_000 Starting the Fireplace for the First Time • Burn the heater at a high setting for an extended period (up to 48 hours). This will cure the painted surfaces. Fumes from the paint curing and oil burning off the steel will occur.
Maintenance 9 © Travis Industries 4070710 100-01194_000 Yearly Service Procedure WARNING: Prior to removing the glass, shut off gas to the appliance (or remove the batteries from the battery box and shut off electricity to the fireplace). This prevents any chance of accidental burner ignition when accessing the firebox.
10 Maintenance © Travis Industries 4070710 100-01194_000 Glass Frame Removal and Installation WARNING: Prior to removing the glass, shut off gas to the appliance (or remove the batteries from the battery box and shut off electricity to the fireplace).
Maintenance 11 © Travis Industries 4070710 100-01194_000 Log Set Installation Overview Below is a picture detailing log placement for this fireplace. Follow the directions on the following pages to place the logs correctly. NOTE: The log set includes a package of four (4) pins used for log installation.
12 Maintenance © Travis Industries 4070710 100-01194_000 Lower Rear Log The lower rear log has two holes that insert over pins on the grate and log bracket.
Maintenance 13 © Travis Industries 4070710 100-01194_000 Upper Rear Log The upper rear log has two holes that insert over pins on the lower rear log. NOTE: With the upper rear log in place, the logs may tend to tilt backward slightly. Once the twigs are installed, the logs will remain in place.
14 Maintenance © Travis Industries 4070710 100-01194_000 Center Ember Note how the pointed end faces inwards. Push the ember back so it rests against the air channel (and not over any burner holes).
Maintenance 15 © Travis Industries 4070710 100-01194_000 Upper Left Log Place the upper left log as shown below. This flat portion rests on the left side of the grate. The front log has a hole that fits over the pin on the grate. This bracket is for the front log.
16 Maintenance © Travis Industries 4070710 100-01194_000 Left Twig Note how the left twig fits directly over the g rate. This notch fits over the grate.
Maintenance 17 © Travis Industries 4070710 100-01194_000 Right Twig Note how the notch in the right twig fits over the g rate. This notch fits over the g rate The right twig has a hole for the pin on the rear log.
18 Maintenance © Travis Industries 4070710 100-01194_000 Ember Placement Place the embers along the firebox floor and burner to help conceal the burner.
Maintenance 19 © Travis Industries 4070710 100-01194_000 Glass Cleaning The glass may be cleaned with a non-abrasive cleaner. To clean the inside of the glass, simply remove the glass frame, place it on a non-scratching surface, and clean the inside surface.
20 Maintenance © Travis Industries 4070710 100-01194_000 Wiring Diagram PRESS TO OPEN POWER AUX Learn Continuous Pilot Off/On Remote/Off ADJ S I Battery Box Wires (DC Motor Drive) - 12' Length B.
Warranty 21 © Travis Industries 4070710 100-01194_000 To register your TRAVIS INDUSTRIES, INC. 7 Year Warranty, complete the enclosed Warranty card and mail it within ten (10) days of the appliance purchase date to: TRAVIS INDUSTRIES, INC., 4800 Harbour Pointe Blvd.
22 Optional Equipment © Travis Industries 4070710 100-01194_000 Accessories The accessories listed below are available at your Travis dealer. To locate a dealer, visit: www.travisproducts.com Andirons These decorative additions attach to the grate inside the firebox and enhance the wood-fire look of your fireplace.
Optional Equipment 23 © Travis Industries 4070710 100-01194_000.
24 Index © Travis Industries 4070710 100-01194_000 Index Accessories .......................................................2 2 Adjusting the Flame Height ..................................8 Before You Begin ..........................................
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Lopi 1080 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Lopi 1080 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Lopi 1080 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Lopi 1080 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Lopi 1080, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Lopi 1080.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Lopi 1080. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Lopi 1080 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.