Manuale d’uso / di manutenzione del prodotto 8221, 8271 del fabbricante Little Wonder
Vai alla pagina of 20
© 2005 Little W onder , Di v . of Schiller -Pfeiffer Inc. All Rights Reserved. LITTLE WONDER ® Shredding Models 8221 and 8271.
1 T able of Contents Important Inf ormation A. Introduction On behalf of ev eryone at Little Wonder , we would like to thank you for your purchase of a Little Wonder Shredding T ruckLoader . This professional debris handling machine was designed to the highest standards to ensure many hours of uninterrupted service.
2 Safety and W arnings A. Safety Decals In order to keep operators of the Shredding T ruckLoader informed regarding safety and/or unit operation, decals (labels) hav e been placed on v arious parts of the unit.
3 General Safety Rules 1. Read and understand manual. 2. W ear eye, hearing, and breathing protection, proper clothing and footwear . 3. While operating the machine, maintain a safe operating position, secure footing and good balance at all times. 4. Keep area clear of children, pets and bystanders.
4 W ARNING D ANGER IF THE SHREDDING TR UCKLO ADER IS USED IMPR OPERL Y OR SAFETY PRECA UTIONS ARE NO T FOLLO WED, THE USER RISKS SERIOUS INJUR Y T O THEMSEL VES AND O THERS. READ AND UNDERST AND THE FOLLO WING BEFORE A TTEMPTING TO OPERA TE THIS SHREDDING TR UCKLO ADER.
5 B. Mounting the Shredding T ruckLoader Frame (Figure #2) 1. There are four holes in the T ruckLoader frame deck through which the unit can be secured to an appropriate mounting surface. For your con venience, (4) Bolts (720599) and (4) Nuts (720560) hav e been provided for the installation.
6 C. Mounting the Boom Arm Assembly to the Housing Boom Column (Figure #3) 1. Slide a Thrust W asher (720428) onto the shaft of the Boom Column Assembly . 2. Apply some #2 lithium based grease to the shaft of the Boom Column. 3. Install the Boom Arm Assembly (720406) onto the shaft of the Boom Column Assembly .
7 E. Changing the direction of the Dischar ge Chute (Figure #4) 1. Loosen the Knobs (720507) by hand and, if needed, the Nuts (720583) with a 1/2” wrench. 2. Rotate the Discharge Chute to the desired position. 3. Retighten the Knobs by hand and the Nuts, if loosened, with the 1/2” wrench.
8 G. Attaching the Chain Loop Assembly to the Boom Arm Assembly (Figur e #6) 1. Slip the threaded end of the Chain Loop Assembly (720290) through the hole found at the end of the Boom Arm Assembly (720406). 2. Once through, secure the Chain Loop Assembly with the Nut (720576).
9 L. Discharge Extension Kit Assembly Instructions Contents Included in Kit: 1. Discharge Extension Hose (720436) 2. Hose Clamp (720388) T ools Needed: 1. 9/16" Box Wrench or Socket Wrench w/ 9/16" Socket 2. Socket Wrench w/ 3/8" Socket or Flat Head Screw Dri v er 3.
10 a) T urn of f the engine and wait until all mo ving parts hav e come to a complete stop. b) Disconnect the spark plug wires from the spark plugs on the engine. c) Remov e the Hose Assembly from the Inlet Flange Assembly . W ith this removed, open the Inlet Flapper and remov e any debris that is clogging the housing.
11 Leaded gasoline is not recommended and must not be used on models where exhaust emissions are regulated. a. Gasoline/Alcohol blends: Gasohol (up to 10% ethyl alcohol, 90% unleaded gasoline by volume) is approv ed as a fuel for K ohler engines. Other gasoline/alcohol blends are not approv ed.
12 Maintenance: A. Removing and Replacing the F an and T alon Ring (Figure #7) 1. Disconnect the spark plug wires from the spark plugs on the engine. 2. Disconnect safety switch wire from engine. 3. Unbolt and Remov e the Inlet Assembly from the face of the Housing.
13 B. Liner Replacement (Figure #7) 1. Complete Steps 1 thru 7 found in section A (Remo ving and Replacing the F an and T alon Ring ). 2. Unbolt and remov e the hardware securing the Liner to the Housing. 3. Remov e the Liner from the housing by wrapping it and pulling it through the front of the housing.
14 D. Hea vy-Duty Air Cleaner 1. Every 250 hours of operation (more often under extremely dusty or dirty conditions), replace the main paper element and check inner element. Follo w these steps. a) Unhook the two retaining clips and remov e the end cap from the air cleaner housing.
15 Storage: A. Preparing f or Long-T erm (T wo Months or More) Storage 1. Clean the exterior surfaces of the unit (including engine). 2. Change the Oil and Filter while the engine is still warm. 3. The fuel system must be completely emptied, or the gasoline must be treated with a stabilizer to prev ent deterioration.
16 53 58 56 29 59 38 37 28 36 33 39 35 24 2 27 23 21 1 25 22 10 3 13 15 19 18 17 11 7 4 30 9 8 31 32 50 49 45 48 43 46 47 44 42 51 55 34 52 63 64 62 41 57 60 61 40 54 20 39 39 34 12 X2 X2 X2 X10 X9 X2.
Model #8221 & 8271 Part Numbers B ALLOON ITEM # P AR T # DESCRIPTION 8221 QTY . 8271 QTY . 1 720903 22 HP K OHLER ENGINE 1 - 1 720904 27 HP K OHLER ENGINE - 1 2 720483 OIL DRAIN V AL VE 1 1 3 720466 3/8" SQ.
18 Model #8221 & 8271 Part Numbers B ALLOON ITEM # P AR T # DESCRIPTION 8221 QTY . 8271 QTY . 49 720257 FLAPPER RET AINER 1 1 50 154 5/16-18 FEMALE THREADED KNOB 2 2 51 720214 P AINTED SWITCH PLA .
LITTLE WONDER ® DIVISION OF SCHILLER-PFEIFFER, INCORPORA TED 1028 STREET R O AD, P .O. BO X 38 SOUTHAMPTON, P A 18966 PHONE 877-596-6337 • F AX 215-357-8045 www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Little Wonder 8221, 8271 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Little Wonder 8221, 8271 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Little Wonder 8221, 8271 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Little Wonder 8221, 8271 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Little Wonder 8221, 8271, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Little Wonder 8221, 8271.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Little Wonder 8221, 8271. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Little Wonder 8221, 8271 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
