Manuale d’uso / di manutenzione del prodotto FENSK05 v2 del fabbricante Linksys
Vai alla pagina of 39
EtherFast ® Series 10/100 Network In a Bo x Model No.: FENSK05 v2 User Guide.
COPYRIGHT & TRADEMARKS Copyright © 2000 Linksys, All Rights Reserved. EtherFast is a register ed trademark of Linksys. Microsoft, Windows, and the Windows logo ar e registered trademarks of Microsoft Corporation. All other trademarks and brand names ar e the property of their respective pr oprietors.
Linksys EtherFast ® Series 10/100 Network In a Box Introduction The Linksys EtherFast 10/100 Network In a Box The Linksys 10/100 Netw ork In a Box comes with e verything you need to get a net- w ork up and running in minutes.
10/100 Network In a Box Getting to Know the EtherFast 10/100 Network In a Box The EtherFast 10/100 LAN Card Y ou will install one EtherF ast 10/100 LAN Card into each computer you wish to netw ork.
The Hub’ s Ports 1-5 P orts 1-5 are where you will connect y our PCs to the hub . It is through these ports that network information is exchanged. Uplink Y ou can expand y our netw ork by connecting y our hub to another hub, switch, router or Broadband modem through the Uplink port.
10/100 Network In a Box 5. Once y our EtherF ast EtherF ast 10/100 LAN Card is f irmly in place , secure its fastening tab to your PC's chassis with a mounting scre w . 6. Replace y our PC's co ver . 7. Connect one end of a twisted-pair cable to y our PC at the EtherF ast 10/100 LAN Card's RJ-45 por t.
10/100 Network In a Box 9 Windows 98 Installation & Setup Overview After ph ysically installing the EtherF ast 10/100 LAN Card in your computer , follo w these instructions to install the network dri ver .
10/100 Network In a Box Linksys EtherFast ® Series 4. Select "Search for the best dri ver for your de vice (Recommended). ” Click Next. 5. Select "Flopp y disk driv es".
10/100 Network In a Box 13 Linksys EtherFast ® Series 12 Network Component Configuration 1. Once you are back at the W indo ws 98 desktop, click on your taskbar's Start button, then Settings , then Control P anel , and then double-click the Netw ork icon.
10/100 Network In a Box 15 Linksys EtherFast ® Series 14 8. Click on the Identif ication tab . T ype the name of y our computer in the Computer Name box. Choose a name that is unique from the other com- puter names on the netw ork. 9. T ype the name of your w orkgr oup in the W or kgr oup box.
10/100 Network In a Box 17 Linksys EtherFast ® Series 16 14. A Logon windo w will appear , requiring you to enter a User name and P assw ord . Make up a user name and pass w ord (if you ha ven’ t already) and click OK . Do not click the Cancel button or Escape ke y .
10/100 Network In a Box 19 Linksys EtherFast ® Series 18 Installing the Driver in Windows 95 V ersion B 1. While the Update Device Driver W izar d windo w is visible (pre vious page), put the EtherF ast Card 10/100 LAN Card Dri ver Disk into your flopp y driv e and click Next .
10/100 Network In a Box 21 Linksys EtherFast ® Series 20 Network Component Configuration 1. Once you are back at the Windo ws 95 desktop, click on your taskbar's Start button, then Settings , then Control P anel , and then double-click the Netw ork icon.
10/100 Network In a Box 23 Linksys EtherFast ® Series 22 8. Click on the Identif ication tab . T ype the name of y our computer in the Computer Name box. Choose a name that is unique from the other com- puter names on the netw ork. 9. T ype the name of your w orkgroup in the W or kgroup bo x.
10/100 Network In a Box 25 Linksys EtherFast ® Series 11. Optional : Choose the Access Contr ol tab . Ensure that Shar ed-level access contr ol is selected. If the setting is on User-Lev el access control and you can’ t change it, skip to problem 5 in the Troub leshooting section on page 45.
10/100 Network In a Box 27 Linksys EtherFast ® Series 26 3. The Install Hardwar e Device Drivers dialog bo x will appear . Whe n Ethernet Contr oller is displa yed , select “Searc h for a suita ble driver f or your device (Recommended)” . Click Ne xt .
10/100 Network In a Box 7. The Completing the F ound New Hardwar e Wizard dialog bo x will appear .The follo wing adapter name will be sho wn: Linksys LNE100TX F ast Ethernet Adapter (LNE100TX v4). Click Finish . 8. Remo v e the driv er disk from the floppy dri ve.
10/100 Network In a Box 31 Linksys EtherFast ® Series 30 3. Click on the Select fr om list... button to select a netw ork adapter . 4. Click on the Ha ve Disk button. Inser t the EtherF ast 10/100 LAN Card Driver Disk into driv e A. T ype a: into the box on y our screen and hit OK .
10/100 Network In a Box 33 Linksys EtherFast ® Series 32 8. A list of services will appear . Click Next to appro ve these services, fol- lo w ed by Ne xt again. 9. NT will probabl y ask you to suppl y your original W indo ws NT CD-R OM or setup disks.
10/100 Network In a Box 35 Linksys EtherFast ® Series 34 13. Click Finish . When asked if you w ant to restar t your computer , remov e the Driv er Disk and click Ye s . 14. Once your PC has rebooted and y ou are logged in, doub le-click the Netw ork Neighborhood icon on y our desktop.
10/100 Network In a Box 37 Linksys EtherFast ® Series 36 3. When the list of a vailab le netw ork adapters appears, click the Ha ve Disk button. 4. Put the EtherF ast Card disk into driv e A. T ype a: into the box on your screen and click OK . 5. Highlight the Linksys LNE100TX F ast Ethernet Adapter (LNE100TX v4) entry in the window that appears.
10/100 Network In a Box 10. Remo ve your Dri ver Disk and CD-R OM and click Ye s to restar t your PC. 11. Once your PC has rebooted , double-click the Netw ork Neighborhood icon on your desktop. Ensure that y ou ha ve access to the netw ork. If you do, your card has been properl y installed.
10/100 Network In a Box 41 Linksys EtherFast ® Series 40 5. If the LAN dri ver is not located in the default director y , specify the f ile's path on the command line. The LO AD command prompts you for the con- f iguration parameters if they are not supplied on the command line.
10/100 Network In a Box 13. Ar row do wn the list that appears and choose which protocols y ou want to install. Press F10 to sa ve. 14. Highlight Sa ve P arameters and Load Driv er . Press Enter . 15. Y our PC will examine the netw ork. This may tak e a few minutes.
10/100 Network In a Box 45 Linksys EtherFast ® Series 44 5. On the Access Control T ab, User Level Access is selected, but Shared Level Access is grayed out and not accessible . • Y ou previousl y had your primary network lo gon set to Client for NetW ar e Networ ks .
10/100 Network In a Box 47 Linksys EtherFast ® Series 46 • Click on the IRQ Steering tab . Remo ve the check from Use IRQ Holder and click OK . W indo ws will ask you to restart the PC (if it doesn’ t ask you, then reboot the PC manuall y). • After the computer boots up, W indo ws will tr y to re-detect the PCI Steering.
10/100 Network In a Box 49 Appendix Sharing Y our Files and Printers Overview By sharing your f iles and printers, other PCs on your netw ork will be able to access the resources on your PC. Before sharing your f iles and printers, you should prepare y our computer to be used with an y f ile ser vers that ma y be on the netw ork.
10/100 Network In a Box 51 Linksys EtherFast ® Series 50 Installing the Driver in Windows 95 V ersion A 1. W indo ws 95 will detect the EtherF ast card and display a Ne w Har dwar e F ound windo w . 2. Slide the EtherF ast Card Driv er Disk into drive A.
10/100 Network In a Box 53 Linksys EtherFast ® Series 52 Windows 98 or 95 Client for Windows NT If you are installing the EtherF ast 10/100 Card in a W indo ws 95 or 98 PC that you plan on lo gging into a NT domain ser ver , follo w the directions belo w .
10/100 Network In a Box 55 Linksys EtherFast ® Series 54 4. Remov e any instance of the name Linksys in the bo x. This includes IPX/SPX…Linksys , NetBEUI…Linksys , and TCP/IP…Linksys . Also remo v e Client for Micr osoft Networ ks , Client for NetW ar e Networ ks , and F ile and Printer Sharing for Micr osoft Networks .
10/100 Network In a Box 57 Linksys EtherFast ® Series 56 Starting Over in Windows 2000 1. Click the Star t button, choose Settings, choose Control Panel, then dou- ble-click the System icon.The System Properties windo w will open. 2. Choose the Hardware tab .
10/100 Network In a Box 59 Linksys EtherFast ® Series 58 Manually Installing the Network Components in Windows 95 & 98 There ma y be times when y ou might need to manually install missing W indo ws netw orking components. 1. Click on Start , Settings , then Control P anel .
10/100 Network In a Box 61 Linksys EtherFast ® Series 60 N N o o t t e e : : Some PME-sup- porting motherboards may not requir e the WOL wire to be con- nected.
10/100 Network In a Box 63 Linksys EtherFast ® Series 62 Sending a Magic Packet In order to use W OL you need to kno w the MA C address of the card you wish to “wak e”. If you don’ t kno w the MA C address of the PC you are on, turn to page 48 to lear n how to run the EtherF ast Card’ s diagnostic program.
10/100 Network In a Box 65 Linksys EtherFast ® Series 64 No Changes Allowed Y our PC may not allo w you to change the IRQ v alue(s) of the PCI slot(s). In this case, you will ONL Y be able to use the IRQ and I/O v alues that hav e been pre-assigned to each slot.
10/100 Network In a Box 67 Linksys EtherFast ® Series 66 • • S S t t r r a a i i g g h h t t - - T T h h r r o o u u g g h h C C a a b b l l i i n n g g • • C C r r o o s s s s - - O O v v e .
10/100 Network In a Box 69 Linksys EtherFast ® Series 68 10/100 LAN Card Specifications Model Numbers: LNE100TX v4 System: PCI 2.1 (or higher) compliant PC Standards: IEEE 802.
10/100 Network In a Box 71 Linksys EtherFast ® Series 70 Customer Support F or help with the installation or operation of your EtherF ast 10/100 Netw ork in a Box, contact Linksys Customer Support at one of the phone numbers or Internet addresses below .
© Cop yr ight 2000 Linksys, All Rights Reserved. http://www .linksys.com.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Linksys FENSK05 v2 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Linksys FENSK05 v2 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Linksys FENSK05 v2 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Linksys FENSK05 v2 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Linksys FENSK05 v2, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Linksys FENSK05 v2.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Linksys FENSK05 v2. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Linksys FENSK05 v2 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
