Manuale d’uso / di manutenzione del prodotto Door phone del fabbricante Link electronic
Vai alla pagina of 18
Doorphone Link Slim Door Phone User Guide for Link Slim Door phone.
2 Contents 1 BASIC DESCRI PTION ............................................................................... 3 1.1 F EATURES ............................................................................................ 3 1.2 S LIM D OOR P HONE MODELS .
3 1. Basic description 1.1 Features ¾ Very slim module for surface mounting only. Supplied in 1, 2 or 4 button variant s. ¾ Voice communication powered fro m analogue telephone line only.
4 2.1.2 Uncover control elements 4. Push the aluminium speaker grille down (see figure – 4). 2.1.3 Wiring and wall mounting 5. Use the wall mounting template at the en d of the manual to mark the position for the screw holes and cable connection on the mounting surface.
5 2.1.4 Switches 7. The switch number 1 (see figure – 8) activates heating of the PCB. This is for increased resistance a gainst humidity. To use this feature you must connect an external 12 V power supply. 8. The switch number 2 (see figure – 9) i s required for programmin g the unit when the password is forgo tten.
6 2.2 Location of ID Doorphone components All mounting, control and setting elements are lo cated under the sp eaker front aluminium grille. . PC connector SlimDoorPhone fixing screw hole Service swit.
7 2.3 Changing name cards Name card panel (0on pa ge 3) has spaces to insert printed name card s. Insert name cards from top (see picture). Cards can easily be printed with pictures as well as text using the includ ed software . The card ou tline is marked for easy cutting .
8 3 SlimDoorPhone Services 3.1 Signalling Overview The unit signals acoustic conditions that may occur during ope ration. You can listen to the signalling samples in the ID Manager program.
9 dialled to close the relay ( p arameter 35 ), releasi ng the lock. Hanging up the telephon e will end the call, as will the busy tone from the PBX. 3.
10 4.2 Programming from a PC – ID Manager program To setup the unit from a PC you will require a special USB tool cable, available se parately, and must first install the USB driver and ID Manager software. Refer to the CD for more details. The unit must also be connected to the telephone line.
11 nn – telephone number up to 16 digits to be store d. Refer to the table for other choices. The number stored in parameter 2 is the numbe r for the second group or the number for Night mode Note: The switchover to Day/Night mode remains set in the unit even after line disconnection.
12 5.3 Basic parameters Parameter Value Description Default Exam.1 Exam.2 41 v Dialling type 0 0 0 v – dial type v=0 is DTMF tone dial, v=1 is pulse dial Parameter Value Description Default Exam.1 Exam.2 42 z Prolong call ∗ ∗ ∗ z – button for call prolongation ∗ or # (10 sec before Maximum Call Duration the unit will emit a tone.
13 d – maximum time in minutes for whi ch a call may last. This time can be extende d during a call by dialling Prolong Call digit from telephone ( ∗ or #). Time setting is per table. Parameter Value Description Default Exam.1 Exam.2 53 w time between button presses 2 2 2 w – max.
14 – p time is simultaneously the duration of interdigit gap at pulse dialling. 5.5 Presetting and Deleting Parameter Value Description Default Exam.
15 z=3 – all tones are active – ( default) It is possible to generate an audible sig nal (only in mode m=1) to alert visitors that the door is unlocked so that they can enter. This is especially useful when using a DC power so urce, as lock release may be silent.
16 50 p Pause duration (ms) 8 (800ms) 8 (800ms) 8 (800ms) 6# s Number of fitted buttons on basic module 6* t Delay of line connectio n (Siemens PBX) 1 1 1 6 z Acoustic signalling 3 and 9 3 and 9 3 and 9 8# # Default setting executes 8# 1 Setting per exam.
17 7 Table for easy programming Complete the values you want to program in the empty part of table on the next page. All programming commands are located in the double-f ramed area, to simplify programming. Retain a copy for future reference. Use Programming sequence Description Detail par.
18 8 Drilling master board.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Link electronic Door phone è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Link electronic Door phone - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Link electronic Door phone imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Link electronic Door phone ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Link electronic Door phone, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Link electronic Door phone.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Link electronic Door phone. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Link electronic Door phone insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.