Manuale d’uso / di manutenzione del prodotto MKX (2013) del fabbricante Lincoln
Vai alla pagina of 457
lincolnowner .com lincolncanada.com November 2012 Third Printing Owner’ s Manual Lincoln MKX Litho in U.S.A. 2013 O WNER’S MANUAL LINC OLN MKX LINCOLN MKX 2013 O WNER’S MANU AL DA1J 19A321 AA.
Introduction 9 Child Safety 17 Child seats ........................................... 1 9 Child seat positioning ................................... 1 9 Booster seats ......................................... 2 1 Installing child safety seats .......
MyKey 63 Settings, MyKey ....................................... 6 3 Creating ............................................. 6 4 C l e a r i n g ............................................. 6 5 System status ......................................... 6 5 Remote start, MyKey .
Windows and Mirrors 95 Power windows ....................................... 9 5 E x t e r i o rm i r r o r s ....................................... 9 6 Interior mirrors ....................................... 9 8 Sun visors .........................
Auxiliary Power Points 149 Storage Compartments 150 Center console ....................................... 1 5 0 Overhead console ..................................... 1 5 0 Starting and Stopping the Engine 151 Starting the engine ....................
Parking Aids 184 Sensing system ....................................... 1 8 4 Rear -view camera system ............................... 1 8 6 Cruise Control 190 Using cruise control ................................... 1 9 0 Using Adaptive Cruise Control .
Customer Assistance 240 Reporting safety defects (U.S. only) ....................... 2 4 7 Reporting safety defects (Canada only) ..................... 2 4 7 Fuses 248 Changing a fuse ...................................... 2 4 8 Fuse specification chart .
V ehicle Care 281 Cleaning products ..................................... 2 8 1 Cleaning the exterior .................................. 2 8 1 W a x i n g ............................................. 2 8 3 Repairing minor paint damage ...............
Ford Extended Service Plan 329 Scheduled Maintenance 332 Normal scheduled maintenance and log ..................... 3 3 7 MyLincoln T ouch™ 349 Infotainment display ................................... 3 5 5 V oice recognition .......................
ABOUT THIS MANUAL Thank you for choosing Ford. W e recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it.
SYMBOL GLOSSAR Y W ARNING: Y ou risk death or serious injury to yourself and others if you do not follow the instruction highlighted by the warning symbol.
Symbol Description Symbol Description Symbol Description Heated rear window Interior luggage compartment release Jack Lighting control Low tire pressure warning Maintain correct fluid level Panic alar.
Event Data Recording This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an airbag deployment or hitting a road obstacle; this data will assist in understanding how a vehicle’ s systems performed.
Note: Including to the extent that any law pertaining to Event Data Recorders applies to SYNC® or its features, please note the following: Once 911 Assist (if equipped) is enabled (set ON), 911 Assis.
LINCOLN AUTOMOTIVE FINANCIAL SER VICES (U.S. ONL Y) Lincoln Automotive Financial Services offers a full range of financing and lease plans to help you acquire your vehicle. If you have financed or leased your vehicle through Lincoln Automotive Financial Services, thank you for your business.
SPECIAL NOTICES New V ehicle Limited Warranty For a detailed description of what is covered and what is not covered by your vehicle’ s New V ehicle Limited W arranty , see the warranty information that is provided to you along with your owner’ s manual.
EXPORT UNIQUE (NON–UNITED ST A TES/CANADA) VEHICLE SPECIFIC INFORMA TION For your particular global region, your vehicle may be equipped with features and options that are different from the features and options that are described in this owner’ s manual.
GENERAL INFORMA TION See the following sections for directions on how to properly use safety restraints for children. W ARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your vehicle.
Recommendations for Safety Restraints for Children Child size, height, weight, or age Recommended restraint type Infants or toddlers Children weighing 40 lb (18 kg) or less (generally age four or younger). Use a child safety seat (sometimes called an infant carrier , convertible seat, or toddler seat).
CHILD SEA TS Use a child safety seat (sometimes called an infant carrier , convertible seat, or toddler seat) for infants, toddlers or children weighing 40 pounds (18 kilograms) or less (generally age four or younger). CHILD SEA T POSITIONING W ARNING: Airbags can kill or injure a child in a child seat.
W ARNING: Always restrain an unoccupied child seat or booster seat. These objects may become projectiles in a crash or sudden stop, which may increase the risk of serious injury .
BOOSTER SEA TS W ARNING: Never place, or allow a child to place, the shoulder belt under a child’ s arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash.
T ypes of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield. If a vehicle seating position has a low seat back or no head restraint, a backless booster seat may place your child’ s head (as measured at the tops of the ears) above the top of the seat.
Children and booster seats vary in size and shape. Choose a booster that keeps the lap belt low and snug across the hips, never up across the stomach, and lets you adjust the shoulder belt to cross the chest and rest snugly near the center of the shoulder .
INST ALLING CHILD SEA TS Using Lap and Shoulder Belts W ARNING: Airbags can kill or injure a child in a child seat. NEVER place a rear -facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move the seat all the way back.
Perform the following steps when installing the child seat with combination lap and shoulder belts: Note: Although the child seat illustrated is a forward-facing child seat, the steps are the same for installing a rear -facing child seat. 1. Position the child safety seat in a seat with a combination lap and shoulder belt.
4. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until you hear a snap and feel the latch engage.
This is necessary to remove the remaining slack that will exist once the extra weight of the child is added to the child restraint. It also helps to achieve the proper snugness of the child seat to your vehicle. Sometimes, a slight lean toward the buckle will additionally help to remove remaining slack from the belt.
The LA TCH system is composed of three vehicle anchor points: two lower anchors located where your vehicle seat back and seat cushion meet (called the seat bight) and one top tether anchor located behind that seating position.
Use of Inboard Lower Anchors from the Outboard Seating Positions (Center Seating Use) Note: The standardized spacing for LA TCH lower anchors is 11 inches.
The tether strap anchors in your vehicle are in the following positions (shown from top view): Perform the following steps to install a child safety seat with tether anchors: Note: If you install a ch.
4. T ighten the child safety seat tether strap according to the manufacturer’ s instructions. If your child restraint system is equipped with a tether strap, and the child restraint manufacturer recommends its use, Ford also recommends its use.
PRINCIPLES OF OPERA TION W ARNING: Never let a passenger hold a child on his or her lap while the vehicle is moving. The passenger cannot protect the child from injury in a crash. W ARNING: It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
W ARNING: Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child. Check seat covers and buckles before you place a child anywhere near them. W ARNING: Front and rear seat occupants, including pregnant women, should wear safety belts for optimum protection in an accident.
F ASTENING THE SAFETY BEL TS The front outboard and rear safety restraints in your vehicle are combination lap and shoulder belts. 1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch.
T o adjust the comfort guide: 1. Slip the shoulder belt into the belt guide. 2. Slide the guide up or down along the webbing so that the belt is centered on the occupant’ s shoulder . Restraint of Pregnant Women W ARNING: Always ride and drive with your seat back upright and the safety belt properly fastened.
Safety Belt Locking Modes W ARNING: After any vehicle crash, the safety belt system at all passenger seating positions must be checked by an authorized dealer to verify that the automatic locking retractor feature for child seats is still functioning properly .
How to Use the Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is pulled out. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound.
SAFETY BEL T HEIGHT ADJUSTMENT W ARNING: Position the safety belt height adjusters so that the belt rests across the middle of your shoulder . Failure to adjust the safety belt properly could reduce the effectiveness of the seat belt and increase the risk of injury in a collision.
SAFETY BEL T -MINDER® This feature supplements the safety belt warning function by providing additional reminders by intermittently sounding a chime and illuminating the safety belt warning light when the driver’ s or front passenger’ s seat is occupied and the safety belt is unbuckled.
Deactivating and Activating the Belt-Minder® Feature W ARNING: While the system allows you to deactivate it, this system is designed to improve your chances of being safely belted and surviving an accident. W e recommend you leave the system activated for yourself and others who may use the vehicle.
4. W ithin about seven seconds of the light turning off, buckle then unbuckle the safety belt. • This will disable the feature for that seating position if it is currently enabled. • This will enable the feature for that seating position if it is currently disabled.
PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontal crash protection to front seat occupants and is designed to help further reduce the risk of airbag-related injuries.
PRINCIPLES OF OPERA TION W ARNING: Airbags do not inflate slowly or gently , and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module.
The airbags are a supplemental restraint system and are designed to work with the safety belts to help protect the driver and right front passenger from certain upper body injuries. Airbags do not inflate slowly; there is a risk of injury from a deploying airbag.
DRIVER AND P ASSENGER AIRBAGS W ARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over the airbag inflation area may cause those objects to be propelled by the airbag into your face and torso causing serious injury .
Proper Driver and Front Passenger Seating Adjustment W ARNING: The National Highway T raffic Safety Administration recommends a minimum distance of at least 10 inches (25 centimeters) between an occupant’ s chest and the driver airbag module.
FRONT P ASSENGER SENSING SYSTEM W ARNING: Even with Advanced Restraints Systems, children 12 and under should be properly restrained in a rear seating position.
The front passenger sensing system uses a passenger airbag status indicator which will illuminate indicating that the front passenger frontal airbag is either ON (enabled) or OFF (disabled). The indicator lamp is located in the center stack of the instrument panel.
• Restart the vehicle and have the person remain in this position for about two minutes. This will allow the system to detect that person and enable the passenger’ s frontal airbag. • If the passenger airbag status indicator OFF lamp remains lit even after this, the person should be advised to ride in the rear seat.
The conditions listed above may cause the weight of a properly seated occupant to be incorrectly interpreted by the front passenger sensing system. The person in the front passenger seat may appear heavier or lighter due to the conditions described in the previous list.
SIDE AIRBAGS W ARNING: Do not place objects or mount equipment on or near the airbag cover , on the side of the seat backs (of the front seats), or in front seat areas that may come into contact with a deploying airbag. Failure to follow these instructions may increase the risk of personal injury in the event of a crash.
The system consists of the following: • a tag on the seat back indicating that side airbags are found on your vehicle • side airbags located inside the seat back of the driver and front passenger seats. • crash sensors and monitoring system with readiness indicator .
W ARNING: All occupants of your vehicle including the driver should always wear their safety belts even when an airbag supplemental restraint system and curtain airbag is provided. Failure to properly wear your safety belt could seriously increase the risk of injury or death.
Children 12 years old and under should always be properly restrained in the rear seats. The Safety Canopy will not interfere with children restrained using a properly installed child or booster seat because it is designed to inflate downward from the headliner above the doors along the side window opening.
If any of these things happen, even intermittently , have the supplemental restraint system serviced at an authorized dealer immediately . Unless serviced, the system may not function properly in the event of a crash.
PRINCIPLE OF OPERA TION The remote control allows you to: • remotely lock or unlock the vehicle doors • remotely open the power liftgate • remotely start or stop the engine • arm and disarm the anti-theft system • activate the panic alarm • activate the global open windows.
Note: Make sure your vehicle is locked before leaving it unattended. Note: If you are in range, the remote control will operate if you press any button unintentionally .
Note: Y our vehicle’ s back-up keys were issued with a security tag that provides important vehicle key cut information. Keep the tag in a safe place for future reference. Replacing the Battery Note: Refer to local regulations when disposing of transmitter batteries.
4. Insert a new battery with the + facing downward. Press the battery down to make sure it is fully in the housing. 5. Snap the battery cover back onto the transmitter and install the backup key . Memory Feature This feature allows you to recall the driver seat, power mirrors and power steering column memory positions.
Deactivating Memory from the Transmitter T o deactivate this feature: 1. Press and hold either the 1 or 2 button for five seconds. A tone will sound when the memory store is done. Continue to hold until a second tone is heard. 2. W ithin three seconds press the unlock button on the remote control.
The remote start system will not work if: • the ignition is on • the alarm system is triggered • you disable the feature • the hood is not closed • the transmission is not in P • the vehicle battery voltage is too low • the service engine soon light is on.
The power windows will be inhibited during the remote start and the radio will not turn on automatically . The parking lamps will remain on and your vehicle will run for 5, 10, or 15 minutes, depending on the setting. See the Information Displays chapter to select the duration of the remote start system.
PRINCIPLES OF OPERA TION MyKey® allows you to program keys with restricted driving modes to promote good driving habits. All but one of the keys programmed to the vehicle can be activated with these restricted modes.
• Audio system maximum volume of 45%. A message in the audio system is displayed when attempting to exceed the limited volume. Also, the speed sensitive compensated volume feature will be disabled.
CLEARING ALL MYKEYS Note: All programmed MyKeys can be cleared within the same key cycle in which a MyKey was created, otherwise an admin key is required to clear the keys. T o clear all MyKeys (which removes all restrictions and returns them to admin key status), use the information display controls to do the following: 1.
In addition to the key that has been programmed as a MyKey , owners of vehicles equipped with traditional keys have the option to program the non-Ford-approved remote start system as a MyKey if the remote start fob is used by the MyKey driver . T o program a non-Ford-approved remote start system as a MyKey , do the following: 1.
MYKEY TROUBLESHOOTING Condition Potential Causes I cannot program a key . • The key in the ignition does not have admin privileges. • The key in the ignition is the only admin key (there always has to be at least one admin key). • The intelligent access key is not in the backup slot (vehicles with push button start).
Condition Potential Causes I lost the only admin key . • Purchase a new key from your authorized dealer . I lost a key . • Program spare keys as outlined under SecuriLock in the Security chapter . I accidentally programmed all keys as restricted keys.
LOCKING AND UNLOCKING Y ou can use the power door lock control or the remote control to lock and unlock the vehicle. Power Door Locks The power door lock control is located on the driver and front passenger door panels. A. Unlock B. Lock Remote Control Y ou can use the remote control anytime the vehicle is not running.
Note: If any door or the luggage compartment is open, or if the hood is open on vehicles equipped with an anti-theft alarm or remote start, the horn will sound twice and the lamps will not flash. Power Liftgate W ARNING: Make sure all persons are clear of the liftgate area before using power liftgate control.
Smart Unlocks The smart unlock feature is intended to prevent you from unintentionally locking your intelligent access key inside your vehicle’ s passenger compartment or rear cargo area.
Autounlock Feature (If Enabled) The autounlock feature will unlock all the doors when: • the ignition is on, all the doors are closed, and your vehicle has been in motion at a speed greater than 12 .
Illuminated Exit The interior dome lamps, parking lamps and puddle lamps (if equipped) illuminate when all doors are closed and the ignition is turned off. The lights turn off if all the doors remain closed and: • 25 seconds elapse • you press the ST AR T/STOP button.
Note: In case of operation in extreme cold -40°F (-40°C), or on extreme inclines, manual operation of the liftgate is suggested. Y ou can enable or disable the power liftgate using the information display . The remote control and instrument panel button will still operate the liftgate regardless of the setting.
2. Press the control button located in the top of the liftgate pull-cup handle. Note: Allow the power system to open the liftgate after pressing the control. Manually pushing or pulling the liftgate may activate the system’ s obstacle detection feature and stops the power operation.
Manual Operation W ARNING: Make sure that the liftgate is closed to prevent exhaust fumes from being drawn into the vehicle. This will also prevent passengers and cargo from falling out. If you must drive with the liftgate door open, keep the vehicle well ventilated so outside air comes into the vehicle.
SECURICODE™ KEYLESS ENTRY KEYP AD Y ou can use the keypad to: • lock or unlock the doors • recall memory features • enable and disable autolock and autounlock • program and erase user codes • arm and disarm the anti-theft alarm.
Erasing a Personal Code 1. Enter the factory-set 5-digit code. 2. Press and release the 1 • 2 on the keypad within five seconds. 3. Press and hold the 1 • 2 for two seconds. This must be done within five seconds of completing Step 2. All personal codes are now erased and only the factory-set 5-digit code will work.
SECURILOCK® P ASSIVE ANTI-THEFT SYSTEM Note: The system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection.
authorized dealer to be erased and reprogrammed if you would like to replace a previously programmed access key with a new access key , or if you already have four access keys programmed to your vehicle.
ANTI-THEFT ALARM The system will warn you of unauthorized entry to your vehicle. The turn signal lamps will flash and sound the horn up to a total of 10 times when: • any door , the hood or the lugg.
ADJUSTING THE STEERING WHEEL W ARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position in the Seats chapter . 1. Unlock the steering column.
Power Tilt and T elescope Steering Column (If Equipped) W ARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. Refer to Sitting in the Correct Position in the Seats chapter .
AUDIO CONTROL SEEK: Press to select the next or previous stored preset or track. Press and hold to select the next or previous frequency or seek through a track. MEDIA: Press repeatedly to scroll through available audio modes. MUTE: Press to silence the radio.
CRUISE CONTROL T ype 1 T ype 2 See the Cruise Control chapter for information on this feature. SET RES CNCL ON OFF GAP Steering Wheel 85 2013 MKX (mkx) Owners Guide gf, 3rd Printing USA (fus).
INFORMA TION DISPLA Y CONTROL Refer to the Information Displays chapter for more information. Cluster Display Control Features Use this control to adjust the right side of the cluster display . Navigate through the screen and press OK to select. Refer to the MyLincoln T ouch™ chapter .
WINDSHIELD WIPERS Note: Fully defrost the windshield in icy conditions before turning on the windshield wipers. Note: Make sure the windshield wipers are switched off before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears.
This feature can be turned on or off using the information display . Keep the outside of the windshield clean, especially the area around the interior mirror where the sensor is located, or sensor performance may be affected. WINDSHIELD W ASHERS Note: Do not operate the wipers on a dry windshield.
LIGHTING CONTROL A. Off B. Parking lamps, instrument panel lamps, license plate lamps and tail lamps C. Headlamps High Beams Push the lever forward to switch the high beams on. Push the lever forward again or pull the lever toward you to switch the high beams off.
The autolamp system provides light sensitive automatic on-off control of the exterior lights normally controlled by the headlamp control. The headlamps will remain on for a period of time after you switch the ignition off. Y ou can adjust the time delay using the message center in the instrument cluster .
6. T urn the lighting control to the autolamp position. The headlamps and parking lamps will turn on. 7. T urn the lighting control to the off position when the desired delay time has been reached.
FRONT FOG LAMPS The fog lamps can be turned on when the lighting control is in the headlamps, parking lamps or autolamps positions and the high beams are not turned on. ADAPTIVE HEADLAMPS (if equipped) The headlamp beams move in the same direction as the steering wheel which provides more visibility when driving around curves.
DIRECTION INDICA TORS The turn signal lever does not mechanically lock in the upward or downward position when activated. The turn signal control activation and cancellation is electronic. • Push down to activate the left turn signal. • Push up to activate the right turn signal.
Front Row Map Lamps (If Equipped) T o turn on the map lamps, press the outer edge of the clear lens. The front row map lamp lights when: • any door is opened. • the dome lamp button on the instrument panel is activated. • the remote entry controls are pressed and the ignition is off.
POWER WINDOWS W ARNING: Do not leave children unattended in your vehicle and do not let children play with the power windows. They may seriously injure themselves. W ARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the proximity of the window openings.
Overriding the Bounce-Back Feature W ARNING: When you override the bounce-back feature the window will not reverse if it detects an obstacle. T ake care when closing the windows to avoid personal injury . Pull up the window switch and hold within two seconds of the window reaching the bounce-back position.
T o adjust your mirrors: 1. Select the mirror you want to adjust. 2. Move the control in the direction you want to tilt the mirror . 3. Return the control to the center position to lock mirrors in place. Fold-Away Exterior Mirrors Push the mirror toward the door window glass.
The image of the approaching vehicle is small and near the inboard edge of the main mirror when it is at a distance. The image becomes larger and begins to move outboard across the main mirror as the vehicle approaches (A). The image will transition from the main mirror and begin to appear in the blind spot mirror as the vehicle approaches (B).
Auto-Dimming Mirror Note: Do not block the sensors on the front and back of the mirror . Mirror performance may be affected. A rear center passenger or raised rear center head restraint may also block light from reaching the sensor . The mirror will dim automatically to reduce glare when bright lights are detected from behind your vehicle.
P ANORAMIC VIST A ROOF® AND POWER SUNSHADES (IF EQUIPPED) W ARNING: Do not let children play with the panoramic Vista Roof® and power sunshade or leave children unattended in the vehicle.
Opening the Sunshade and Moonroof Note: The moonroof will only open after sunshades are completely open. Press and release the control to open the sunshade. The front and rear sunshades open simultaneously . Press and release the control to open the moonroof.
GAUGES Cluster shown in standard measure – metric clusters similar . A. Information display . See Information displays for more information. B. Speedometer C.
Adaptive cruise control (if equipped) (RTT) The speed control system indicator light changes color to indicate what mode the system is in: • On (gray light): Illuminates when the adaptive cruise control system is turned on. T urns off when the speed control system is turned off.
Charging system (RTT) Illuminates when the battery is not charging properly . If it stays on while the engine is running, there may be a malfunction with the charging system. Contact your authorized dealer as soon as possible. This indicates a problem with the electrical system or a related component.
Low tire pressure warning Illuminates when your tire pressure is low . If the light remains on at start up or while driving, the tire pressure should be checked. When the ignition is first turned to on, the light will illuminate for 3 seconds to ensure the bulb is working.
Solid illumination after the engine is started indicates the on-board diagnostics system (OBD-II) has detected a malfunction. Refer to On-board diagnostics (OBD-II) in the Fuel and Refueling chapter . If the light is blinking, engine misfire is occurring which could damage your catalytic converter .
AUDIBLE W ARNINGS AND INDICA TORS Key In Ignition W arning Chime Sounds when the key is left in the ignition in the off or accessory position and the driver’ s door is opened. Keyless W arning Alert (If Equipped) Sounds when the keyless vehicle is in RUN and the driver’ s door is opened.
GENERAL INFORMA TION W ARNING: Driving while distracted can result in loss of vehicle control, accident and injury . Ford strongly recommends that drivers use extreme caution when using any device or feature that may take their focus off the road. Y our primary responsibility is the safe operation of the vehicle.
Fuel Economy Settings Information Scroll up/down to highlight one of the categories, then press the right arrow key or OK to enter into that category . Press the left arrow key as needed to exit back to the main menu. Display Mode Use the up/down arrow buttons to choose between the following display options.
• Fuel gauge: Indicates approximately how much fuel is left in the fuel tank. The fuel gauge may vary slightly when the vehicle is in motion or on a grade. When the fuel level becomes low (50 miles [80 km] to empty), the level indicator will change to amber .
• A verage fuel economy — shows the average fuel economy for a given trip. • Estimated amount of fuel consumed — shows the amount of fuel used for a given trip. • Elapsed trip time — timer stops when the vehicle is turned off and restarts when the vehicle is restarted.
Driver Assist Cross T raffic On (default on key cycle) / Off Cruise Control Adaptive or Normal Rear Park Aid On (default on key cycle) / Off T railer Sway On (default on key cycle) / Off V ehicle Auto.
*MyKey Create MyKey Press and hold OK to create MyKey 911 Assist Always On / User Selectable T raction Control Always On / User Selectable Max Speed Choose desired speed or off Speed W arning Choose desired speed or off V olume Limiter On / Off Clear MyKeys Hold OK to Clear All MyKeys *Some MyKey items will only appear if a MyKey is set.
MyKey Admin Keys (Number of admin keys) MyKeys (Number of MyKeys programmed) MyKey Miles (km) (Distance traveled using a programmed MyKey) System Check All active warnings will display first if applicable. The system check menu may appear different based upon equipment options and current vehicle status.
Adaptive Cruise Control Messages Action / Description Adaptive Cruise Malfunction Displayed when a radar malfunction is preventing the ACC from engaging. Adaptive Cruise Not A vailable Displayed when conditions exist such that the adaptive cruise cannot function properly .
A WD Messages Action / Description AW D O f f Displayed when the A WD system has been automatically disabled to protect itself. This is caused by operating the vehicle with the compact spare tire installed or if the system is overheating.
Battery and Charging System Messages Action / Description T ransport Mode Contact Dealer Contact your authorized dealer as soon as possible. Factory Mode Contact Dealer Contact your authorized dealer as soon as possible.
Brake System Messages Action / Description Park Brake Engaged Displayed when the parking brake is set, the engine is running and the vehicle is driven more than 3 mph (5 km/h). If the warning stays on after the parking brake is released, contact your authorized dealer as soon as possible.
Fuel Messages Action / Description Check Fuel Fill Inlet Displayed when the fuel fill inlet may not be properly closed. Fuel Level Low XXX mi/km to E Displayed as an early reminder of a low fuel condition.
Keys and Intelligent Access Messages Action / Description Starting System Fault This message is displayed when there is a problem with your vehicle’ s starting system. See your authorized dealer for service. Maintenance Messages Action / Description LOW Engine Oil Pressure Stop the vehicle as soon as safely possible, turn off the engine.
MyKey® Messages Action / Description MyKey active Drive Safely Displayed when MyKey® is active. MyKey not Created Displayed during key programming when MyKey® cannot be programmed. Speed Limited to xx MPH/km/h Displayed when starting the vehicle and MyKey® is in use and the MyKey speed limit is on.
Passenger Sensing System Message Action / Description Remove Objects Near Passenger Seat Displayed when objects are by the passenger seat. After the objects are moved away from the seat, if the warning stays on or continues to come on contact your authorized dealer as soon as possible.
GENERAL INFORMA TION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal Communications Commission (FCC) and the Canadian Radio and T elecommunications Commission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.
Always handle discs by their edges only . Clean the disc with an approved CD cleaner only . Wipe it from the center of the disc toward the edge. Do not clean in a circular motion. Do not expose discs to direct sunlight or heat sources for extended periods.
AM/FM/CD PREMIUM AUDIO SYSTEM W ARNING: Driving while distracted can result in loss of vehicle control, accident and injury . Ford strongly recommends that you use extreme caution when using any device or feature that may take your focus off the road.
B. Eject: Press this button to eject a CD. C. CD Slot: Insert a CD. D. TUNE + and TUNE - : • In radio mode, press these buttons to manually search through the radio frequency band. • In SIRIUS mode, press these buttons to find the next or previous available satellite radio station.
DUAL AUTOMA TIC TEMPERA TURE CONTROL SYSTEM Note: Y ou can switch temperature units between Fahrenheit and Celsius. See Settings in the MyLincoln T ouch chapter . A. MyT emp: Allows you to quickly adjust to a frequently used setting with a single touch.
F. A/C: Press to turn air conditioning off and on. Air conditioning cools the vehicle using outside air . T o improve air conditioning when starting your vehicle, drive with the windows slightly open for two to three minutes. Use A/C with recirculated air to improve cooling performance and efficiency .
During extreme high ambient temperatures when idling stationary for extended periods of time in gear , it is recommended to run the A/C in the MAX A/C mode, adjust the blower fan speed to the lowest setting and put the vehicle’ s transmission into position P to continue to receive cool air from your A/C system.
CABIN AIR FIL TER Note: A cabin air filter must be installed at all times to prevent foreign objects from entering the system. Running the system without a filter in place could result in degradation or damage to the system.
Automatic Climate Systems Automatic Settings Y ou can set the climate control to operate in AUTO mode through the information display setting: Remote Start > Climate Control > Heater – A/C > Auto. The climate control system automatically sets the interior temperature to 72°F (22°C).
SITTING IN THE CORRECT POSITION W ARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting in serious injury or death in a crash.
• Bend your legs slightly so that you can press the pedals fully . • Position the shoulder strap of the safety belt over the center of your shoulder and position the lap strap tightly across your hips. Make sure that your driving position is comfortable and that you can maintain full control of your vehicle.
The head restraints consist of : A. An energy absorbing head restraint B. T wo steel stems C. Guide sleeve unlock and remove button D. Guide sleeve adjust and release button • Raise: Pull up on the head restraint (A). • Lower: Press and hold the guide sleeve adjust and release button (D) and push down on the head restraint (A).
POWER SEA TS W ARNING: Never adjust the driver’ s seat or seat back when the vehicle is moving. W ARNING: Before returning the seat back to its original position, make sure that cargo or any objects are not trapped behind the seat back.
Power Lumbar MEMOR Y FUNCTION The memory control, located on the instrument panel, allows automatic positioning of the driver seat and power mirrors to two programmable positions. Y ou may also have this feature for the power tilt and telescopic steering column.
Recalling a Memory Position with the Remote Control The memory positions are also recalled when you press unlock on your remote control (if the transmitter is programmed to a memory position) or , when you enter a valid personal entry code that is programmed to a memory position.
Note: Do not do the following: • Place heavy objects on the seat • Operate the seat heater if water or any other liquid is spilled on the seat. Allow the seat to dry thoroughly .
T o remove an air filter: 1. T urn the vehicle off. 2. Push up on the outside rigid edge of the filter and rotate counterclockwise once the tabs are released, then remove the filter . T o install a filter: 1. First, position the filter in its housing making sure that the far forward end is all the way up in the housing.
EasyFold™ Folding Seat (If Equipped) W ARNING: Make sure that the seat is unoccupied when folding it down. Folding the seat while occupied could result in damage to the seat or injury . Note: The power feature is operational when the vehicle is in park and the liftgate has been open for less than 10 minutes.
REAR SEA T ARMREST Press the latch and pull the armrest forward for armrest or cupholder use. Lift up one of the slotted areas on the cover to access the cup holders. T o close the armrest, close the cupholder cover and rotate the armrest rearward until the latch clicks.
Rear Heated Seats W ARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, exhaustion, or other physical conditions, must exercise care when using the seat heater .
HOMELINK® WIRELESS CONTROL SYSTEM (IF EQUIPPED) W ARNING: Make sure that the garage door and security device are free from obstruction when you are programming.
Programming Note: Put a new battery in the hand-held transmitter . This will ensure quicker training and accurate transmission of the radio-frequency signal. 1. W ith your vehicle parked outside of the garage and your key in the ignition, turn the key so that the ignition is in the on position.
After programming the HomeLink button, follow Step s5–7a sl i s t e d below to program your garage door opener . Note: Y ou may need a ladder to reach the unit and you may need to remove the cover or lamp lens on your garage door opener .
Reprogramming a single button T o program a device to a previously trained button, follow these steps: 1. Press and hold the desired button. Do NOT release the button. 2. The indicator light will begin to flash after 20 seconds. W ithout releasing the button, follow Step 1 in the Programming section.
Note: the Genie transmitter will transmit for up to 30 seconds. If HomeLink® does not program within 30 seconds the Genie transmitter will need to be pressed again. If the Genie transmitter LED displays green and red, release the button until the LED turns off before pressing the button again.
Clearing a HomeLink® device T o erase programming from the three HomeLink® buttons, press and hold the two outer HomeLink® buttons until the indicator light begins to flash. The LED will begin flashing in 10 to 20 seconds, at which time both buttons should be released.
AUXILIAR Y POWER POINTS Note: Do not insert objects other than an accessory plug into the power point. This will damage the outlet and blow the fuse. Note: Do not hang any type of accessory or accessory bracket from the plug. Note: Improper use of the power outlet can cause damage not covered by your warranty .
CENTER CONSOLE Stow items in the cupholder carefully as items may become loose during hard braking, acceleration or collisions, including hot drinks which may spill. A vailable console features include: A. Cupholders B. Utility compartment with in-bin powerpoint, removable coin holder , removable storage tray and intelligent access key slot.
GENERAL INFORMA TION W ARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. W ARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover .
Ignition Modes Off: T urns the ignition off. • W ithout applying the brake pedal, press and release the button once when the ignition is in the on mode, or when the engine is running but the vehicle is not in motion. Accessory: Allows some electrical accessories to operate while the engine is not running.
If you are unable to start your vehicle, do the following: 1. Locate the key backup slot at the front of the center console storage compartment. 2. W ith the buttons facing down, place the key into backup slot. 3. W ith the key in this position, press the brake pedal, then the button to switch the ignition on and start your vehicle.
Fast Restart The fast restart feature allows you to restart the engine within 20 seconds of switching it off, even if a valid key is not present. W ithin 20 seconds of switching the engine vehicle off, press the brake pedal and press the button.
If the engine does not start after three attempts, wait 10 seconds and follow this flooded engine procedure. 1. Fully press the brake pedal. 2. Fully press the accelerator pedal and hold it there.
W e recommend that you do the following for safe and correct operation: • Use a 16-gauge outdoor extension cord that is product certified by Underwriter’ s Laboratory or Canadian Standards Association. This extension cord must be able to be used outdoors, in cold temperatures, and be clearly marked Suitable for Use with Outdoor Appliances.
SAFETY PRECAUTIONS W ARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. W ARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops.
• A void getting fuel liquid in your eyes. If fuel is splashed in the eyes, remove contact lenses (if worn), flush with water for 15 minutes and seek medical attention. Failure to seek proper medical attention could lead to permanent injury . • Fuels can also be harmful if absorbed through the skin.
RUNNING OUT OF FUEL A void running out of fuel because this situation may have an adverse effect on powertrain components. If you have run out of fuel: • Y ou may need to cycle the ignition from off to on several times after refueling to allow the fuel system to pump the fuel from the tank to the engine.
When filling the vehicle’ s fuel tank from a portable fuel container , use the funnel included with the vehicle. 1. Locate the white plastic funnel in the spare tire compartment. 2. Slowly insert the funnel into the capless fuel system. 3. Fill the vehicle with fuel from the portable fuel container .
Easy Fuel® “No Cap” Fuel System W ARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door , do not refuel until the sound stops. Otherwise, fuel may spray out, which could cause serious personal injury .
FUEL CONSUMPTION Filling the T ank The advertised capacity is the indicated capacity and the empty reserve combined. Indicated capacity is the difference in the amount of fuel in a full tank and a tank when the fuel gauge indicates empty . Empty reserve is the amount of fuel in the tank after the fuel gauge indicates empty .
Keep a record for at least one month and record the type of driving (city or highway). This provides an accurate estimate of the vehicle’ s fuel economy under current driving conditions. Additionally , keeping records during summer and winter show how temperature impacts fuel economy .
An improperly operating or damaged exhaust system may allow exhaust to enter the vehicle. Have a damaged or improperly operating exhaust system inspected and repaired immediately .
If the service engine soon indicator remains on, have your vehicle serviced at the first available opportunity . Although some malfunctions detected by the OBD-II may not have symptoms that are appare.
AUTOMA TIC TRANSMISSION W ARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). T urn the ignition to the off position and remove the key whenever you leave your vehicle. Y our vehicle has been designed to improve fuel economy by reducing fuel usage while coasting or decelerating.
S (Sport) Moving the gearshift lever to S (Sport): • Provides additional grade (engine) braking and extends lower gear operation to enhance performance for uphill climbs, hilly terrain or mountainous areas. This will increase engine RPM during engine braking.
If your vehicle is equipped with paddles on the steering wheel: • Pull the left paddle (–) to downshift the transmission. • Pull the right paddle (+) to upshift the transmission.
Brake-shift interlock W ARNING: Do not drive your vehicle until you verify that the brakelamps are working. W ARNING: When doing this procedure, you will be taking the vehicle out of park which means the vehicle can roll freely . T o avoid unwanted vehicle movement, always fully set the parking brake prior to doing this procedure.
2. Locate the brake shift interlock lever in front of the shifter assembly . 3. Apply the brake pedal. Gently push and hold the brake shift interlock lever while pulling the gearshift lever out of the P (Park) position and into the N (Neutral) position.
W ARNING: If the engine is revved excessively , or if a malfunction is detected when the hill start assist feature is active, the hill start assist feature will be deactivated. This feature makes it easier to pull away when the vehicle is on a slope without the need to use the parking brake.
USING YOUR ALL-WHEEL DRIVE (A WD) SYSTEM (IF EQUIPPED) A WD uses all four wheels to power the vehicle. This increases traction, enabling you to drive over terrain and road conditions that a conventional two-wheel drive vehicles cannot. The A WD system is active all the time and requires no input from the operator .
Driving In Special Conditions With All-Wheel Drive (A WD) A WD vehicles are equipped for driving on sand, snow , mud and rough roads and have operating characteristics that are somewhat different from conventional vehicles, both on and off the highway .
If Y our Vehicle Gets Stuck W ARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). T urn the ignition to the lock position and remove the key whenever you leave your vehicle.
Sand When driving over sand, try to keep all four wheels on the most solid area of the trail. A void reducing the tire pressures but shift to a lower gear and drive steadily through the terrain. Apply the accelerator slowly and avoid spinning the wheels.
Note: Driving through deep water may damage the transmission. If the front or rear axle is submerged in water , the axle lubricant and PTU (power transfer unit) lubricant should be checked and changed if necessary .
Descend a hill in the same gear you would use to climb up the hill to avoid excessive brake application and brake overheating. Do not descend in neutral; instead, disengage overdrive or manually shift to a lower gear . When descending a steep hill, avoid sudden hard braking as you could lose control.
A void sudden applications of power and quick changes of direction on snow and ice. Apply the accelerator slowly and steadily when starting from a full stop.
GENERAL INFORMA TION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn out and should be inspected by an authorized dealer .
Anti-Lock Brake System This system helps you maintain steering control during emergency stops by keeping the brakes from locking. The anti-lock brake system lamp momentarily illuminates when the ignition is turned on.
PRINCIPLES OF OPERA TION The traction control system helps avoid drive wheel spin and loss of traction. If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time.
PRINCIPLES OF OPERA TION W ARNING: V ehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction or wheel and tire size may change the handling characteristics of the vehicle and may adversely affect the performance of the AdvanceT rac® system.
A V ehicle without AdvanceT rac® with RSC® skidding off its intended route. B V ehicle with AdvanceT rac® with RSC® maintaining control on a slippery surface. USING ADV ANCETRAC® WITH RSC® The system automatically activates when you start your engine.
SENSING SYSTEM W ARNING: T o help avoid personal injury , please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed) objects when moving in reverse on a flat surface at parking speeds.
The system can be turned off using the information display control. Refer to the Information Display chapter . If a fault is present in the system, a warning message appears in the information display and does not allow the driver to switch the faulted system on.
REAR VIEW CAMERA SYSTEM W ARNING: The rear view camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the interior and exterior mirrors for maximum coverage.
Using the Rear View Camera System The rear view camera system displays what is behind your vehicle when you place the transmission in R (Reverse). The system uses two types of guides to help you see what is behind your vehicle: 1.
Guidelines and the Centerline Note: Fixed guidelines are only available when the transmission is in R (Reverse). Note: The centerline is only available if Fixed guidelines are on. A. Rear bumper B. Fixed guideline: Red zone C. Fixed guideline: Y ellow zone D.
Manual Zoom W ARNING: When manual zoom is on, the full area behind the vehicle is not shown. Be aware of your surroundings when using the manual zoom feature. Note: Manual zoom is only available when the transmission is in R (Reverse). Note: When manual zoom is enabled, only the centerline is shown.
PRINCIPLES OF OPERA TION Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. USING CRUISE CONTROL W ARNING: Do not use cruise control in heavy traffic or on roads that are winding, slippery or unpaved. Note: V ehicle speed may vary momentarily when driving up or down a steep hill.
Changing the Set Speed Note: If you accelerate by pressing the accelerator pedal, the set speed will not change. When you release the accelerator pedal, you will return to the speed that you previously set. • Press SET up or down and hold to increase or decrease the set speed.
W ARNING: Do not use in poor visibility , specifically fog, rain, spray or snow . Note: It is your responsibility to stay alert, drive safely and be in control of the vehicle at all times. The system will automatically adjust your speed to maintain a proper distance between you and the vehicle in front of you in the same lane.
The information display will show a green indicator light, current gap setting and desired set speed. 4. T ake your foot off the accelerator pedal. 5. A lead vehicle graphic will illuminate if there is a vehicle detected in front of you.
The vehicle brakes will be automatically applied to slow the vehicle to maintain a safe distance from the vehicle in front. The maximum braking which is applied by the system is limited and can be overridden by the driver applying the brakes.
Overriding Adaptive Cruise Control W ARNING: Whenever the driver is overriding the ACC by pressing the accelerator pedal, the ACC will not automatically apply the brakes to maintain separation from any vehicle ahead. Y ou can override the set speed and gap distance by pressing the accelerator pedal.
Low Speed Automatic Cancellation The system is not functional at vehicle speeds below 16 mph (26 km/h). An audible alarm sounds and the automatic braking released if the vehicle drops below this speed. Hilly Condition Usage Note: An audible alarm sounds and the system shuts down if it is applying brakes for an extended period of time.
Detection issues can occur: A. When driving on a different line than the vehicle in front. B. W ith vehicles that edge into your lane. The system can only detect these vehicles once they move fully into your lane. C. There may be issues with the detection of vehicles in front when driving into and coming out of a bend or curve in the road.
Blocked Sensor W ARNING: Do not use ACC when towing a trailer with brake controls. Aftermarket trailer brakes will not function properly when ACC is activated because the brakes are electronically controlled. Failing to do so may result in loss of vehicle control, which could result in serious injury .
Cause Action The surface of the radar in the grille is dirty or obstructed in some way Clean the grille surface in front of the radar or remove the object causing the obstruction The surface of the radar in the grille is clean but the message remains in the display W ait a short time.
BLIND SPOT INFORMA TION SYSTEM (BLIS®) WITH CROSS TRAFFIC ALERT (CT A) (IF EQUIPPED) W ARNING: T o help avoid injuries, NEVER use the BLIS® as a replacement for using the interior and exterior mirrors and looking over your shoulder before changing lanes.
Using the Systems BLIS® turns on when the engine is started and the vehicle is driven forward above 3 mph (5 km/h); it remains on while the transmission is in D (Drive) and N (Neutral). If shifted out of D (Drive) or N (Neutral), the system enters CT A mode.
Zone coverage also decreases when parking at shallow angles. Here, the left sensor is mostly obstructed; zone coverage on that side is severely limited. System Lights and Messages The BLIS® and CT A systems illuminate a yellow alert indicator in the outside mirror on the side of the vehicle the approaching vehicle is coming from.
System Sensors W ARNING: Just prior to the system recognizing a blocked condition and alerting the driver , the number of missed objects will increase. T o help avoid injuries, NEVER use the BLIS® as a replacement for using the side and rear view mirrors and looking over your shoulder before changing lanes.
Reasons for messages being displayed The radar surface is dirty or obstructed Clean the fascia area in front of the radar or remove the obstruction. The radar surface is not dirty or obstructed Drive normally in traffic for a few minutes to allow the radar to detect passing vehicles so it can clear the blocked state.
System Errors If either system senses a problem with the left or right sensor , the BLIS® indicator in the information display will illuminate and remain on.
If it is, a red warning light illuminates and an audible warning chime sounds. The brake support system assists the driver in reducing the collision speed by charging the brakes. If the risk of collision further increases after the warning light illuminates, the brake support prepares the brake system for rapid braking.
Blocked Sensors If a message regarding a blocked sensor appears in the information display , the radar signals from the sensor have been obstructed. The sensors are located behind a fascia cover near the driver side of the lower grille.
System Limitations W ARNING: The collision warning system’ s brake support can only help reduce the speed at which a collision occurs if the driver applies the vehicle’ s brakes. The brake pedal must be pressed just like any typical braking situation.
STEERING T o help prevent damage to the power steering system: • Never hold the steering wheel at its furthest turning points (until it stops) for more than three to five seconds while the engine is running. • Do not operate the vehicle with a low power steering pump fluid reservoir level (below the MIN mark on the reservoir).
CARGO NETS W ARNING: This net is not designed to restrain objects during a collision or heavy braking. The cargo net secures lightweight objects in the cargo area. Attach the net to the anchors provided in one of the two configurations. Repeat the attachment on both sides of the vehicle.
T ype 2 CARGO MANAGEMENT SYSTEM The system is located in the floor of the cargo area. Lift the release handle to open. Load Carrying 21 1 2013 MKX (mkx) Owners Guide gf, 3rd Printing USA (fus).
ROOF RACKS AND LOAD CARRIERS (IF EQUIPPED) W ARNING: When loading the roof rail crossbars, it is recommended to evenly distribute the load, as well as maintain a low center of gravity . Loaded vehicles, with higher centers of gravity , may handle differently than unloaded vehicles.
UTILITY HOOK The utility hook can be used to hang small items such as grocery bags, etc. Do not hang more than 10 pounds (4.5 kilograms) on the hook. LOAD LIMIT V ehicle Loading – With and Without a.
Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be found on the T ire Label on the B-Pillar or the edge of the driver’ s door (vehicles exported outside the US and Canada may not have a T ire Label).
Example only: Load Carrying 215 2013 MKX (mkx) Owners Guide gf, 3rd Printing USA (fus).
Cargo W eight – includes all weight added to the Base Curb W eight, including cargo and optional equipment. When towing, trailer tongue load weight is also part of cargo weight. GA W (Gross Axle W eight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload.
• Example only: W ARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury .
GCW (Gross Combined W eight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer . GCWR (Gross Combined W eight Rating) – is the maximum allowable weight of the vehicle and the loaded trailer – including all cargo and passengers – that the vehicle can handle without risking damage.
Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.” on your vehicle’ s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
• Suppose your vehicle has a 1400 lb. (635 kg) cargo and luggage capacity . Y ou and one of your friends decide to pick up cement from the local home improvement store to finish that patio you have been planning for the past 2 years. Measuring the inside of the vehicle with the rear seat folded down, you have room for 12-100 lb.
TOWING A TRAILER W ARNING: Do not exceed the GVWR or the GA WR specified on the certification label. W ARNING: T owing trailers beyond the maximum recommended gross trailer weight exceeds the limit of.
TRAILER SW A Y CONTROL (IF EQUIPPED) Note: This feature does not prevent trailer sway , but reduces it once it begins. Note: This feature cannot stop all trailers from swaying. Note: In some cases, if vehicle speed is too high, the system may turn on multiple times, gradually reducing vehicle speed.
Y our vehicle may tow a Class I or III trailer provided the maximum trailer weight is less than or equal to the maximum trailer weight listed for your vehicle configuration on the following chart. Powertrain Maximum GCWR - lb. (kg) Maximum trailer weight - lb.
T railer T owing Connector (V ehicles Equipped with a T railer-towing or Prep Package) The trailer towing connector is located under the rear bumper , on the left side of your vehicle. Color Function 1. Dark Green Right turn signal, brake lamp and hazard flasher 2.
T railer Lamps W ARNING: Never connect any trailer lamp wiring to the vehicle’ s tail lamp wiring; this may damage the electrical system resulting in fire. Contact your authorized dealer as soon as possible for assistance in proper trailer tow wiring installation.
• Allow more distance for stopping with a trailer attached. Anticipate stops and brake gradually . • A void parking on a grade. However , if you must park on a grade: 1. T urn the steering wheel to point your vehicle tires away from traffic flow .
WRECKER TOWING If you need to have your vehicle towed, contact a professional towing service or , if you are a member of a roadside assistance program, your roadside assistance service provider . W e recommend the use of a wheel lift and dollies or flatbed equipment to tow your vehicle.
TOWING THE VEHICLE ON FOUR WHEELS Emergency T owing If your vehicle becomes inoperable (without access to wheel dollies, car -hauling trailer , or flatbed transport vehicle), it can be flat-towed (all.
Y ou can tow your all-wheel drive vehicle with all four wheels on the ground or with all four wheels off the ground using a vehicle transport trailer . Do not tow your all-wheel drive vehicle with the front wheels off the ground (by using a tow dolly) and the rear wheels on the ground.
BREAKING-IN Y ou need to break in new tires for approximately 300 mi (480 km). During this time, your vehicle may exhibit some unique driving characteristics. A void driving too fast during the first 1000 mi (1600 km). V ary your speed frequently and change up through the gears early .
• Drive a heavily loaded vehicle or tow a trailer . • Carry unnecessary weight (approximately 1 mpg [0.4 km/L] is lost for every 400 pounds [180 kilograms] of weight carried). • Add particular accessories to your vehicle (e.g.; bug deflectors, rollbars or light bars, running boards, ski racks).
FLOOR MA TS W ARNING: Always use floor mats that are designed to fit the footwell of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured to retention posts so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways.
W ARNING (Continued) • Failure to properly follow floor mat installation or attachment instructions can potentially cause interference with pedal operation causing loss of control of vehicle. • T o install floor mats, position the floor mat so that the eyelet is over the retention post and press down to lock in.
ROADSIDE ASSIST ANCE V ehicles Sold in the U.S. : Getting Roadside Assistance T o fully assist you should you have a vehicle concern, Ford Motor Company offers a complimentary roadside assistance program. This program is separate from the New V ehicle Limited W arranty .
V ehicles sold in the U.S. : Using roadside assistance Complete the roadside assistance identification card and place it in your wallet for quick reference. This card is found in the owner’ s manual portfolio in the glove compartment. U.S. Lincoln vehicle customers who require Roadside Assistance, call 1-800-521-4140.
FUEL CUT -OFF SWITCH W ARNING: Failure to inspect and if necessary repair fuel leaks after a collision may increase the risk of fire and serious injury . Ford Motor Company recommends that the fuel system be inspected by an authorized dealer after any collision.
Preparing Y our V ehicle Note: Use only a 12 volt supply to start your vehicle. Note: Do not disconnect the battery of the disabled vehicle as this could damage the vehicle’ s electrical system. 1. Park the booster vehicle close to the hood of the disabled vehicle making sure the two vehicles do not touch.
Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery . 1. Connect the positive (+) jumper cable to the positive (+) terminal of the discharged battery . 2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery .
Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery . Remove the jumper cables in the reverse order that they were connected. 1. Remove the jumper cable from the ground metal surface.
GETTING THE SERVICES YOU NEED W arranty repairs to your vehicle must be performed by an authorized dealer . While any authorized dealer handling your vehicle line will provide warranty service, we recommend you return to your selling authorized dealer who wants to ensure your continued satisfaction.
In Canada: Mailing address Lincoln Customer Relationship Centre Ford Motor Company of Canada, Limited P .O. Box 2000 Oakville, Ontario L6J 5E4 T elephone 1-800-387-9333 Online www .lincolncanada.com Additional assistance If you have questions or concerns, or are unsatisfied with the service you are receiving, follow these steps: 1.
IN CALIFORNIA (U.S. ONL Y) California Civil Code Section 1793.2(d) requires that, if a manufacturer or its representative is unable to repair a motor vehicle to conform to the vehicle’ s applicable .
THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM (U.S. ONL Y) Y our satisfaction is important to Ford Motor Company and to your dealer . If a warranty concern has not been resolved using the three-s.
UTILIZING THE MEDIA TION or ARBITRA TION PROGRAM (CANADA ONL Y) This pertains to vehicles delivered to authorized Canadian dealers. In those cases, where you continue to feel that the efforts by Ford .
If your vehicle must be serviced while you are traveling or living in Asia-Pacific Region, Sub-Saharan Africa, U.S. V irgin Islands, Central America, the Caribbean, and Israel, contact the nearest authorized dealer .
If you buy your vehicle in North America and then relocate to any of the above locations, register your vehicle identification number (VIN) and new address with Ford Motor Company Export Operations & Global Growth Initiatives by emailing expcac@ford.
REPORTING SAFETY DEFECTS (U.S. ONL Y) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway T raffic Safety Administration (NHTSA) in addition to notifying Ford Motor Company .
CHANGING A FUSE Fuses W ARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in the vehicle are not working, a fuse may have blown.
FUSE SPECIFICA TION CHART Power Distribution Box W ARNING: Always disconnect the battery before servicing high current fuses. W ARNING: T o reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs.
Fuse or relay number Fuse amp rating Protected components 5 40A** Anti-lock brake system (ABS) pump 6 — Not used 7 30A** Power liftgate 8 20A** Moonroof 9 20A** Powerpoint #2 (console rear) 10 — N.
Fuse or relay number Fuse amp rating Protected components 34 — Blower motor relay 35 — Not used 36 — Rear seat relay 37 — Right trailer tow (TT) stop/turn lamps relay 38 — Not used 39 40A** .
Fuse or relay number Fuse amp rating Protected components 62 10A* A/C clutch 63 15A* TT stop/turn lamps relay 64 20A* Rear wiper motor 65 15A* Fuel pump 66 — Powertrain control module (PCM) relay 67.
Fuse or relay number Fuse amp rating Protected components 92 10A* ABS module 93 5A* Blower motor/rear defroster relay 94 30A** Passenger compartment fuse panel run/start 95 — Not used 96 — Not use.
The fuses are coded as follows. Fuse or relay number Fuse amp rating Protected components 1 30A Driver front smart window 2 15A Not used (spare) 3 30A Passenger front smart window 4 10A Demand lamps relay 5 20A Subwoofer 6 5A Radio frequency module 7 7.
Fuse or relay number Fuse amp rating Protected components 11 10A Instrument panel cluster , Heads-up display 12 15A Interior lighting, Puddle lamps, Backlighting 13 15A Right turn/stop lamps and turn .
Fuse or relay number Fuse amp rating Protected components 29 20A Radio, Electronic finish panel, SYNC® module 30 15A Front park lamps 31 5A Not used (spare) 32 15A Moonroof, Power windows (front), Co.
GENERAL INFORMA TION Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of Ford authorized dealers that are there to help you with their professional servicing expertise.
Working with the Engine On W ARNING: T o reduce the risk of vehicle damage or personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running. 1. Set the parking brake and shift to position P .
UNDER HOOD OVERVIEW A. Engine coolant reservoir B. Power steering fluid reservoir C. Brake fluid reservoir D. Battery E. Power distribution box F . Air filter assembly G.
ENGINE OIL DIPSTICK A. MIN B. MAX ENGINE OIL CHECK Note: Check the level before starting the engine. Note: Make sure that the level is between the MIN and MAX marks. 1. Make sure that your vehicle is on level ground. 2. T urn the engine off and wait 10 minutes for the oil to drain into the oil pan.
ENGINE COOLANT CHECK Checking the Engine Coolant The concentration and level of engine coolant should be checked at the intervals listed in Scheduled Maintenance Information. Note: Make sure that the level is between the COLD FILL RANGE marks on the coolant reservoir .
W ARNING: Do not add coolant further than the MAX mark. Note: Do not use stop leak pellets or cooling system sealants/additives as they can cause damage to the engine cooling and/or heating systems. This damage would not be covered under your vehicle’ s warranty .
Recycled Engine Coolant Ford Motor Company does NOT recommend the use of recycled engine coolant since a Ford-approved recycling process is not yet available. Used engine coolant should be disposed of in an appropriate manner . Follow your community’ s regulations and standards for recycling and disposing of automotive fluids.
How Fail-Safe Cooling Works If the engine begins to overheat, the engine coolant temperature gauge will move to the red (hot) area and: The coolant temperature warning light will illuminate.
Y ou have limited engine power when in the fail-safe mode, so drive the vehicle with caution. The vehicle will not be able to maintain high-speed operation and the engine will run rough. Remember that the engine is capable of completely shutting down automatically to prevent engine damage, therefore: 1.
4. Latch the gearshift lever in P (Park) and leave the engine running. 5. Remove the dipstick, wiping it clean with a clean, dry lint free rag. If necessary , refer to Under hood overview in this chapter for the location of the dipstick. 6. Install the dipstick making sure it is fully seated in the filler tube by turning it to the locked position.
Adjusting automatic transmission fluid levels Before adding any fluid, make sure the correct type is used. The type of fluid used is normally indicated on the dipstick and also in the T echnical specifications section in this chapter . Note: Use of a non-approved automatic transmission fluid may cause internal transmission component damage.
5. If the fluid is low , add fluid in small amounts, continuously checking the level until it reaches the range between the MIN and MAX lines. Be sure to put the cap back on the reservoir . Refer to the Capacities and Specifications chapter for the proper fluid type.
W ARNING: Keep batteries out of reach of children. Batteries contain sulfuric acid. A void contact with skin, eyes or clothing. Shield your eyes when working near the battery to protect against possible splashing of acid solution.
When the battery is disconnected or a new battery installed, the automatic transmission must relearn its adaptive strategy . As a result of this, the transmission may shift firmly when first driven. This operation is considered normal and will fully update transmission operation to its optimum shift feel.
CHECKING THE WIPER BLADES Run the tip of your fingers over the edge of the blade to check for roughness. Clean the wiper blades with washer fluid or water applied with a soft sponge or cloth. CHANGING THE WIPER BLADES 1. Pull the wiper arm away from the vehicle.
Changing rear window wiper blade The rear wiper arm is designed without a service position. This reduces the risk of damage to the blade in an automatic car wash. T o replace the wiper blade: 1. Grab the wiper arm with one hand close to the arm/blade joint and pull it as far away from the glass as possible.
Changing the air filter element 1. Release the clamps that secure the air filter housing cover . 2. Carefully separate the two halves of the air filter housing. 3. Remove the air filter element from the air filter housing. 4. W ipe the air filter housing and cover clean to remove any dirt or debris and to ensure good sealing.
V ertical Aim Adjustment 1. Park the vehicle directly in front of a wall or screen on a level surface, approximately 25 feet (7.6 meters) away . • (1) 8 feet (2.4 meters) • (2) Center height of lamp to ground • (3) 25 feet (7.6 meters) • (4) Horizontal reference line 2.
For V ehicles with HID Headlamps: There is a distinct cut-off (change from light to dark) in the left portion of the beam pattern. The top edge of this cut-off should be positioned 2 inches (5 centimeters) below the horizontal reference line. 4. Locate the vertical adjuster on each headlamp.
These are examples of unacceptable moisture (usually caused by a lamp water leak): • W ater puddle inside the lamp. • Large water droplets, drip marks or streaks present on the interior of the lens. T ake your vehicle to a dealer for service if any of the above conditions of unacceptable moisture are present.
Replacing HID headlamp bulbs (if equipped) The low beam headlamps on your vehicle use a “high intensity discharge” source. These lamps operate at a high voltage. When the bulb is burned out, the bulb and starter capsule assembly must be replaced by your authorized dealer .
Replacing fog lamp bulbs 1. Make sure that the fog lamp switch is in the off position. 2. From underneath the vehicle, remove the splash shield and rotate the harness/bulb assembly counterclockwise, to remove from the fog lamp. 3. Carefully disconnect the bulb from the harness assembly via the two snap clips.
Replacing tail/stop/turn/side marker lamp bulbs Y our vehicle is equipped with a tail/stop/turn/sidemarker lamp assembly containing integral multiple light emitting diodes (LED).
BULB SPECIFICA TION CHART Replacement bulbs are specified in the chart below . Headlamp bulbs must be marked with an authorized “D.O.T .” for North America and an “E” for Europe to ensure lamp performance, light brightness and pattern and safe visibility .
GENERAL INFORMA TION Y our Ford or Lincoln authorized dealer has many quality products available to clean your vehicle and protect its finishes. CLEANING PRODUCTS For best results, use the following p.
• Immediately remove items such as gasoline, diesel fuel, bird droppings and insect deposits because they can cause damage to the vehicle’ s paintwork and trim over time.
W AXING • W ash the vehicle first. • Use a quality wax that does not contain abrasives. • Do not allow paint sealant to come in contact with any non-body (low-gloss black) colored trim, such as grained door handles, roof racks, bumpers, side moldings, mirror housings or the windshield cowl area.
CLEANING THE WINDOWS AND WIPER BLADES The windows and wiper blades should be cleaned regularly . If the wipers do not wipe properly , substances on the vehicle’ s glass or the wiper blades may cause squeaking or chatter noise from the blades, and streaking and smearing of the windshield.
For fabric, carpets, cloth seats, safety belts and seats equipped with side airbags: • Remove dust and loose dirt with a vacuum cleaner . • Remove light stains and soil with Motorcraft® Professional Strength Carpet & Upholstery Cleaner .
If a staining liquid like coffee or juice has been spilled on the instrument panel or on interior trim surfaces, clean as follows: 1. W ipe up spilled liquid using a clean, white, cotton cloth. 2. W ipe the surface with a damp, clean, white, cotton cloth.
• Never apply any cleaning chemical to hot or warm wheel rims or covers. • Some automatic car washes may cause damage to the finish on your wheel rims or covers. Industrial-strength (heavy-duty) cleaners, or cleaning chemicals, in combination with brush agitation to remove brake dust and dirt, could wear away the clear coat finish over time.
Engine • The engine oil and filter should be changed prior to storage, as used engine oil contains contaminates that may cause engine damage. • Start the engine every 15 days. Run at fast idle until it reaches normal operating temperature. • W ith your foot on the brake, shift through all the gears while the engine is running.
Miscellaneous • Make sure all linkages, cables, levers and pins under vehicle are covered with grease to prevent rust. • Move vehicles at least 25 ft (8 m) every 15 days to lubricate working parts and prevent corrosion.
GENERAL INFORMA TION Important Information for P265/40R22 Low-profile Tires and Wheels Note: Y our vehicle’ s warranty does not cover these types of damage. T ires should always be kept at the correct inflation pressures and extra caution should be taken when operating on rough roads to avoid impacts that could cause wheel and tire damage.
W ARNING: In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. All occupants must wear seat belts. Children and infants must use appropriate restraints to minimize the risk of injury or ejection.
How Y our Vehicle Dif fers from Other V ehicles Crossover vehicles can differ from some other vehicles in a few noticeable ways. Y our vehicle may be: • Higher – to allow higher load carrying capacity . • Shorter – to give it the capability to approach inclines.
T ire Quality Grades apply to new pneumatic passenger car tires. They do not apply to deep tread, winter -type snow tires, space-saver or temporary use spare tires, light truck or L T type tires, tires with nominal rim diameters of 10 to 12 inches or limited production tires as defined in T itle 49 Code of Federal Regulations Part 575.
T emperature A B C W ARNING: The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.
• Recommended inflation pressure: The cold inflation pressure found on the Safety Compliance Certification Label (affixed to either the door hinge pillar , door -latch post, or the door edge that meets the door -latch post, next to the driver’ s seating position) or T ire Label located on the B-Pillar or the edge of the driver’ s door .
Note: If your tire size does not begin with a letter , this may mean it is designated by either ETRTO (European T ire and Rim T echnical Organization) or JA TMA (Japan Tire Manufacturing Association). B. 215: Indicates the nominal width of the tire in millimeters from sidewall edge to sidewall edge.
Letter rating Speed rating - mph (km/h) W 168 mph (270 km/h) Y 186 mph (299 km/h) Note: For tires with a maximum speed capability over 149 mph (240 km/h), tire manufacturers sometimes use the letters ZR. For those with a maximum speed capability over 186 mph (299 km/h), tire manufacturers always use the letters ZR.
• T emperature: The temperature grades are A (the highest), B and C, representing the tire’ s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
Information on T T ype Tires T type tires have some additional information beyond those of P type tires. These differences are described below . T145/80D16 is an example of a tire size. Note: The temporary tire size for your vehicle may be different from this example.
INFLA TING YOUR TIRES Safe operation of your vehicle requires that your tires are properly inflated. Remember that a tire can lose up to half of its air pressure without appearing flat. Every day before you drive, check your tires. If one looks lower than the others, use a tire gauge to check pressure of all tires and adjust if required.
Maximum Inflation Pressure is the tire manufacturer’ s maximum permissible pressure or the pressure at which the maximum load can be carried by the tire.
Note: Some spare tires operate at a higher inflation pressure than the other tires. For T -type mini-spare tires, see the Dissimilar Spare T ire and Wheel Assembly Information section. Store and maintain at 60 psi (4.15 bar). For full-size and dissimilar spare tires, see the Dissimilar Spare T ire and Wheel Assembly Information section.
Damage Periodically inspect the tire treads and sidewalls for damage (such as bulges in the tread or sidewalls, cracks in the tread groove and separation in the tread or sidewall). If damage is observed or suspected, have the tire inspected by a tire professional.
Tire Replacement Requirements W ARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus L T -metric or all-season versus all-terrain) as those originally provided by Ford.
Y our vehicle is equipped with tires designed to provide a safe ride and handling capability . Important: Remember to replace the wheel valve stems when the road tires are replaced on your vehicle. The two front tires or two rear tires should generally be replaced as a pair .
If you feel a sudden vibration or ride disturbance while driving, or you suspect your tire or vehicle has been damaged, immediately reduce your speed. Drive with caution until you can safely pull off the road.
Rotating your tires at the recommended interval (as indicated in the scheduled maintenance information) will help your tires wear more evenly , providing better tire performance and longer tire life. • Front-wheel drive/All-wheel drive vehicles (front tires at left of diagram) Sometimes irregular tire wear can be corrected by rotating the tires.
• Install cables securely , verifying that the cables do not touch any wiring, brake lines or fuel lines. • Drive cautiously . If you hear the cable chains rub or bang against your vehicle, stop and retighten the cables. If this does not work, remove the cables to prevent damage to your vehicle.
Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’ s responsibility to maintain correct tire pressure, even if under -inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.
Changing Tires with a T ire Pressure Monitoring System Note: Each road tire is equipped with a tire pressure sensor located inside the tire and wheel assembly cavity . The pressure sensor is attached to the valve stem. The pressure sensor is covered by the tire and is not visible unless the tire is removed.
When Y ou Believe Y our System Is Not Operating Properly The main function of the tire pressure monitoring system is to warn you when your tires need air .
Low tire pressure warning light Possible cause Customer action required Flashing warning light Spare tire in use Repair the damaged road wheel and tire and reinstall it on the vehicle to restore system function. For a description on how the system functions, see When Y our T emporary Spare T ire is Installed in this section.
CHANGING A ROAD WHEEL W ARNING: The use of tire sealants may damage your tire pressure monitoring system and should not be used. However , if you must use a sealant, the tire pressure monitoring system sensor and valve stem on the wheel must be replaced by an authorized Ford dealer .
A dissimilar spare tire and wheel assembly is defined as a spare tire or wheel that is different in brand, size or appearance from the road tires and wheels and can be one of three types: 1. T -type mini-spare: This spare tire begins with the letter T for tire size and may have T emporary Use Only molded in the sidewall.
The usage of a full-size dissimilar spare tire and wheel assembly can lead to impairment of the following: • Handling, stability and braking performance • Comfort and noise • Ground clearance an.
W ARNING: Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. W ARNING: Always use the jack provided as original equipment with your vehicle.
6. Block the diagonally opposite wheel. 7. Loosen each wheel lug nut one-half turn counterclockwise but do not remove them until the wheel is raised off the ground. 8. The vehicle jacking points are shown here, and are depicted on the yellow warning label on the jack.
12. Lower the wheel by turning the jack handle counterclockwise. 13. Remove the jack and fully tighten the lug nuts in the order shown. See Wheel Lug Nut T orque Specifications later in this chapter for the proper lug nut torque specification.
TECHNICAL SPECIFICA TIONS Wheel Lug Nut T orque Specifications W ARNING: When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel.
ENGINE SPECIFICA TIONS Engine 3.7L V6 engine Cubic inches 227 Required fuel Minimum 87 octane Firing order 1–4–2–5–3–6 Ignition system Coil on plug Compression ratio 10.5:1 Spark plug gap 0.049–0.053 inch (1.25–1.35 mm) Engine drivebelt routing 1.
TECHNICAL SPECIFICA TIONS Item Capacity Ford Part Name Ford Part Number / Ford Specification Brake fluid Between MIN and MAX on reservoir Motorcraft® High Performance DOT 3 Motor V ehicle Brake Fluid.
Item Capacity Ford Part Name Ford Part Number / Ford Specification Engine coolant 3 11.7 quarts (11.1L) 4,5 Motorcraft® Orange Antifreeze/Coolant Prediluted • VC-3DIL-B (US) • CVC-3DIL-B (Canada).
Item Capacity Ford Part Name Ford Part Number / Ford Specification Fuel tank (front-wheel drive) 18.3 gallons (69.3L) — — Fuel tank (all-wheel drive) 19.
Motorcraft part numbers Component 3.7L V6 engine Air filter element F A-1884 Battery BXT -65-650 Oil filter FL-500-S Spark plugs SP-520 1 Cabin air filter FP65 W indshield wiper blade WW -2601-PF (dri.
The V ehicle Identification Number (VIN) contains the following information: A. W orld manufacturer identifier B. Brake system / Gross V ehicle W eight Rating (GVWR) / Restraint Devices and their location C. Make, vehicle line, series, body type D. Engine type E.
TRANSMISSION CODE DESIGNA TION Y ou can find a transmission code on the Safety Compliance Certification Label. The following table tells you which transmission each code represents.
ACCESSORIES For a complete listing of the accessories that are available for your vehicle, please contact your dealer or visit our online store at: Accessories.Lincoln.com (U.S. only). Lincoln Custom Accessories are available for your vehicle through your local Lincoln or Lincoln of Canada dealer .
• Cargo security shade • Cargo area protector • Bumper protector • Wheel locks • Hitch-mounted parking sensors* *Lincoln Licensed Accessories are warranted by the accessory manufacturer’ s warranty .
FORD ESP EXTENDED SER VICE PLANS (U.S. ONL Y) More than 32 million Ford and Lincoln owners have discovered the powerful protection of Ford ESP . It is the only extended service plan backed by Ford Motor Company , and provides “peace of mind” protection beyond the New V ehicle Limited W arranty coverage.
Ford ESP Can Quickly Pay for Itself One service bill – the cost of parts and labor – can easily exceed the price of your Ford ESP Service Contract.
FORD ESP EXTENDED SER VICE PLANS (CANADA ONL Y) Y ou can get more protection for your vehicle by purchasing a Ford Extended Service Plan (ESP). Ford ESP is the only service contract backed by Ford Motor Company of Canada, Limited.
GENERAL MAINTENANCE INFORMA TION Why Maintain Y our V ehicle? Carefully following the maintenance schedule helps protect against major repair expenses resulting from neglect or inadequate maintenance and may also help to increase the value of your vehicle when you sell or trade it.
Protecting Y our Investment Maintenance is an investment that will pay dividends in the form of improved reliability , durability and resale value. T o maintain the proper performance of your vehicle and its emission control systems, it is imperative that scheduled maintenance be completed at the designated intervals.
Oils, Fluids and Flushing In many cases, fluid discoloration is a normal operating characteristic and, by itself, does not necessarily indicate a concern or that the fluid needs to be changed.
Multi-point Inspection In order to keep your vehicle running right, it is important to have the systems on your vehicle checked regularly . This can help identify potential issues and prevent major problems.
336 Scheduled Maintenance 2013 MKX (mkx) Owners Guide gf, 3rd Printing USA (fus).
NORMAL SCHEDULED MAINTENANCE AND LOG Intelligent Oil-Life Monitor® Y our vehicle is equipped with an Intelligent Oil-Life Monitor® that determines when the engine oil needs to be changed based on how your vehicle is used.
Normal Scheduled Maintenance * At every oil change interval as indicated by the information display Change engine oil and filter . ** Rotate tires, inspect tire wear and measure tread depth. Perform multi-point inspection (recommended). Inspect automatic transmission fluid level (if equipped with dipstick).
Additional Maintenance Items 1 Every 20000 miles (32000 km) Replace cabin air filter (if equipped). Every 30000 miles (48000 km) Replace engine air filter . At 100000 miles (160000 km) Change engine coolant. 2 Every 100000 miles (160000 km) Replace spark plugs.
Maintenance Schedule Log D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A .
D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D A.
D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D A.
SPECIAL OPERA TING CONDITIONS If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additional maintenance.
Extensive Idling or Low-speed Driving for Long Distances as in Heavy Commercial Use (i.e., Delivery , T axi, Patrol Car or Livery) As required Change engine oil and filter as indicated by the information display and perform services listed in the Normal Scheduled Maintenance chart.
Special Operating Condition Log D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P.
D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D A.
EXCEPTIONS There are several exceptions to the Normal Schedule. They are listed below: Normal vehicle axle maintenance: Rear axles and power take-off units with synthetic fluid and light-duty trucks e.
All-wheel drive vehicles only: V ehicles operating off-road in sand during high ambient temperatures must replace the power transfer unit lube every 20000 miles (32000 kilometers). Engine air filter & cabin air filter replacement: Engine air filter and cabin air filter life is dependent on exposure to dusty and dirty conditions.
INTRODUCTION W ARNING: Driving while distracted can result in loss of vehicle control, accident and injury . Ford strongly recommends that drivers use extreme caution when using any device or feature that may take their focus off the road. Y our primary responsibility is the safe operation of the vehicle.
PHONE Press to select any of the following: • Making and Receiving Calls • Quick Dial • Phonebook • Call History • T ext Messaging • Settings NA VIGA TION Press to select any of the follow.
HOME Press to access your home screen. Depending on your vehicle’ s option package and software, your screens may vary in appearance from the descriptions in this section. Y our features may also be limited depending on your market. Check with your authorized dealer for availability .
Cleaning the T ouchscreen Display Use a clean, soft cloth such as one used for cleaning glasses. If dirt or fingerprints are still visible, apply a small amount of alcohol to the cloth. Do not pour or spray alcohol onto the display . Do not use detergent or any type of solvent to clean the display .
When using SYNC: • Do not operate playing devices if the power cords or cables are broken, split or damaged. Place cords and cables out of the way , so they do not interfere with the operation of pedals, seats, compartments or safe driving abilities.
Restricted Features W i-Fi and W ireless Editing wireless settings Editing the list of wireless networks Videos, Photos and Graphics Playing video Editing the screen’ s wallpaper or adding new wallp.
ACCESSING AND ADJUSTING MODES THROUGH YOUR RIGHT VEHICLE INFORMA TION DISPLA Y The display is located on the right side of your instrument cluster . Y ou can use your steering wheel controls to view and make minor adjustments to active modes without taking your hands off the wheel.
Navigation Climate Y ou can make selections from the menu by using the OK button. The selection menu expands and different options appear . • Press the up and down arrows to scroll through the modes. • Press the right arrow to enter the mode. • Press the left or right arrows to make adjustments within the chosen mode.
How to Use V oice Commands with Y our System Press the voice icon. After the tone, speak your command clearly . These commands can be said at any time.
Accessing a List of Available Commands • If you use the touchscreen, press the Settings icon > Help > V oice Command List. • If you use the steering wheel control, press the voice icon.
Phone/Media Candidate Lists: Candidate lists are lists of possible results from your voice commands. The system creates these lists when it has the same confidence level of several options based on your voice command. T o access these settings using the touchscreen: 1.
For example, you can choose from the following on the Navigation home screen: • My Home • Favorites • Previous Destinations • Point of Interest (POI) • Emergency • Street Address • Intersection • Cancel Route.
If you choose Points of Interest from the navigation screen, you can choose from the following: • Search Area • Search By Name • Fuel Station • AT M • All Restaurants • Accommodations • Parking.
The dual mode feature is also available when the voice system displays a list of items to pick from during a voice session, where you would be able to touch the line item or say “Line 2”. If the system does not understand a voice command, or there are multiple options, the system displays a voice command list for you.
“BROWSE” “<League> games” ”<Sirius category> channels” “CD track list” “SD card” “Sirius channel guide” “USB” “Help” For a complete list of “Browse” voice commands, see USB and SD card voice commands and Bluetooth audio voice commands in the following sections.
When you select: Y ou can: Options Sound Settings allows you to adjust Bass, Midrange, T reble, Balance and Fade, DSP (Digital Signal Processing), Occupancy Mode, and Speed Compensated V olume settings.
HD Radio™ Information (If Available) Note: HD Radio broadcasts are not available in all markets. HD Radio technology is the digital evolution of analog AM/FM radio. Y our system has a special receiver that allows it to receive digital broadcasts (where available) in addition to the analog broadcasts, it already receives.
When HD Radio broadcasts are active, you can access the following functions: When you select: Y ou can: Scan Hear a brief sampling of all available stations. This feature still works when HD Radio reception is on, although it does not scan for HD2-HD7 channels.
HD Radio Reception and Station Troubleshooting Potential Reception Issues Reception area If you are listening to a multicast station and you are on the fringe of the reception area, the station may mute due to weak signal strength.
Potential Station Issues Issue Cause Action Echo, stutter , skip or repeat in audio. Increase or decrease in audio volume. This is poor time alignment by the radio broadcaster . No action required. This is a broadcast issue. Sound fading or blending in and out.
Radio V oice Commands If you are listening to the radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to the radio, press the voice button and, after the tone, say “Radio”, then any of the commands in the following chart.
“TUNE” “AM preset <#>” “HD <#>” * “FM” “Preset <#>” “FM <87.9–107.9>” “Help” “FM <87.9-107.9> HD <#>” * * If available. SIRIUS® Satellite Radio (If Activated) Press the lower left corner of the touchscreen, then select the SIRIUS tab.
When you select: Y ou can: Options Sound Settings allows you to adjust Bass, Midrange, T reble, Balance and Fade, DSP (Digital Signal Processing), Occupancy Mode and Speed Compensated V olume.
When you select: Y ou can: Direct T une Enter the desired satellite channel number using the on-screen keypad. Browse View a list of all available stations. Scroll and select the desired station. Y ou can also lock or skip unwanted channels or view the song and artist on other stations.
“TUNE” “<0–233>” “<Channel name>” “Preset <#>” “SA T” “SA T 1” “SA T 1 preset <#>” “SA T 2” “SA T 2 preset <#>” “SA T 3” “SA T.
Potential Satellite Radio Reception Issues Antenna obstructions For optimal reception performance, keep the antenna clear of snow and ice build-up and keep luggage and other materials as far away from the antenna as possible.
SIRIUS T roubleshooting T ips Radio Display Condition Possible Action Unsubscribed Channel. Y our subscription does not include this channel. Contact SIRIUS at 1–888–539–7474 to subscribe to the channel, or tune to another channel. No Signal. The signal is lost from the SIRIUS satellite or SIRIUS tower to your vehicle antenna.
CD Press the lower left corner of the touchscreen, and then select the CD tab. When you select: Y ou can: Repeat Choose to repeat the currently playing track, all tracks on the disc or turn the feature off if already on. Shuffle Play the tracks or entire albums in random order , or turn the feature off if already on.
CD V oice Commands If you are listening to a CD, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to a CD, press the voice button and, after the tone, say “CD”, then any of the commands in the following chart.
SD logo is a trademark of SD-3C, LLC. USB Port The ports are located either in the center console or behind a small access door in the instrument panel.
Playing Music from Y our Device Insert your device and select the USB or SD Card tab once the system recognizes it. Y ou can then select from the following options: When you select: Y ou can: Repeat Repeat the currently playing song or album. Shuffle Play music on the selected album or folder in random order .
SD Card and USB V oice Commands If you are listening to a USB device or an SD card, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart.
“BROWSE” “Album <name>” “All video podcasts” * “All albums” “All videos” * “All artists” “Artist <name>” “All audiobooks” “Audiobook <name>” “Al.
Bluetooth Audio Y our system allows you to stream audio over your vehicle’ s speakers from your connected, Bluetooth-enabled cellular phone. T o access, press the lower left corner on the touchscreen, then select the BT Stereo tab.
Y our A/V inputs allow you to connect an auxiliary audio/video source (such as a gaming systems or a personal camcorder) by connecting RCA cords (not included) to these input jacks. The jacks are yellow , red and white and are located either behind a small access door on the instrument panel or in your center console.
Troubleshooting • Do not connect the audio input jack to a line level output. The jack only works correctly with devices that have a headphone output with a volume control.
Pairing Y our Phone for the First Time W ARNING: Driving while distracted can result in loss of vehicle control, accident and injury . Ford strongly recommends that drivers use extreme caution when using any device that may take their focus off the road.
Making Calls Press the voice button. When prompted, say , “Call <name>” or say “Dial”, then the desired number . T o end the call or exit phone mode, press and hold the phone button. Receiving Calls During an incoming call, an audible tone sounds.
When you select: Y ou can: Phonebook Access and call any contacts in your previously downloaded phone book. The system places the entries in alphabetical categories summarized at the top of the screen.
T ext Messaging Note: Downloading and sending text messages using Bluetooth are phone-dependent features. Note: Certain features in text messaging are speed-dependent and not available when your vehicle is traveling at speeds over 3 mph (5 km/h). Note: SYNC does not download read text messages from your phone.
Pre-defined T ext Message Options I’ll call you back in a few minutes. I just left, I’ll be there soon. Can you give me a call? I’m on my way . I’m running a few minutes late. I’m ahead of schedule, so I’ll be there early . I’m outside. I’ll call you when I get there.
Phone Settings Press Phone > Settings, then select from the following settings: If you select: Y ou can: Bluetooth Devices Connect, disconnect, add or delete a device, as well as save it as a favorite. Bluetooth T urn Bluetooth off or on. Do Not Disturb Have all calls go directly to your voice mail and not ring in the vehicle.
Phone V oice Commands Press the voice button on the steering wheel control. After the tone, say any of the following commands: “PHONE” “Bluetooth off” “Hold call off” * “Bluetooth on” .
INFORMA TION Under the Information menu, you can access features, such as: • SYNC® Services • SIRIUS® T ravel Link™ • Alerts • Calendar • SYNC Applications. If your vehicle is equipped with Navigation, press the i (Information) button to access these features.
Note: When you connect, the service uses GPS technology and advanced vehicle sensors to collect your vehicle’ s current location, travel direction and speed to help provide you with the directions, traffic reports, or business searches you request.
Receiving Turn-by-T urn Directions 1. When connected to SYNC Services, say “Directions” or “Business Search”. T o find the closest business or type of business to your current location, just say “Business Search” and then “Search Near Me”.
Disconnecting from SYNC Services 1. Press and hold the phone button on the steering wheel. 2. Say “Goodbye” from the SYNC Services main menu. SYNC Services Quick T ips Personalizing Y ou can personalize your Services feature to provide quicker access to your most used or favorite information.
SYNC Services V oice Commands When a route has been downloaded (non-navigation systems), press the voice button on the steering wheel control. When prompted, say any of the following commands: “SER .
Press the Information button > Sirius T ravel Link, and then choose from any of the following services: When you select: Y ou can: T raffic On Route Identify traffic incidents on your route, nearby your vehicle’ s current location or near any of your favorite places (if programmed).
T ravel Link V oice Commands “Sports schedule” * “W eather map” * If you have said, “Sports headlines”, “Sports schedule” or “Sports scores”, you may say any of the commands in the.
Alerts Press the Information button > Alerts. • Vi e w the message. • Delete the message. • Delete All messages. This screen displays any system messages (such as an SD card fault). Note: The system alerts you to any messages by turning the information icon yellow .
Note: If any user turns 911 Assist on or off, that setting applies for all paired phones. If 911 Assist is turned off, either a voice message plays or a display message (or icon) comes on (or both) when your vehicle is started after a previously paired phone connects.
In the Event of a Crash Not all crashes deploy an airbag or activate the fuel pump shut-off (which would trigger 911 Assist); however , SYNC tries to contact emergency services if 911 Assist triggers.
V ehicle Health Report (If Equipped, U.S. Only) W ARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. V ehicle Health Report supplements, but cannot replace, normal maintenance and vehicle inspection.
Making a Report If you want to run a report by using the touchscreen, touch the Information button > Apps > V ehicle Health Report. T o run a report by voice command, press the voice button on the steering wheel and, when prompted, say “V ehicle health report”.
Display Y ou can adjust the touchscreen display through the touchscreen or by pressing the voice button on your steering wheel controls and when prompted, say , “Display settings”. Press the Settings icon > Display , then select from the following: Brightness allows you to make the screen display brighter or dimmer .
V ehicle Press the Settings icon > V ehicle, then select from the following: • Active Park Assist • Ambient Lighting • V ehicle Health Report • Door Keypad Code • Rear View Camera • Enable V alet Mode. Active Park Assist When activated, your system displays directions for you regarding the active park assist process.
Enable V alet Mode Note: If the system locks, and you need to reset the PIN, enter 3681 and the system unlocks. V alet mode allows you to lock the system. No information is accessible until the system is unlocked with the correct PIN. 1. Press the Settings icon > V ehicle > Enable V alet Mode.
V oice Control Press the Settings icon > Settings > V oice Control, then select from the following: V oice Control Interaction Mode Standard interaction mode provides more detailed interaction and guidance. Advanced mode has less audible interaction and more tone prompts.
Media Player Press the Settings icon > Settings > Media Player , then select from the following: Media Player Autoplay When this feature is on, the system automatically switches to the media source upon initial connection. This allows you to listen to music during the indexing process.
Navigation Press the Settings icon > Settings > Navigation, then select from the following: Navigation Map Preferences T urn breadcrumbs on and off. Have the system display your turn list top to bottom or bottom to top. T urn the Parking POI notification on and off.
Phone Settings Press the Settings icon > Settings > Phone, then select from the following: Phone Bluetooth Devices Connect, disconnect, add or delete a device, as well as save it as a favorite. Bluetooth T urn Bluetooth on and off. Do Not Disturb Have all calls go directly to your voice mail and not ring inside your vehicle.
Wireless & Internet Y our system has a Wi-Fi feature that creates a wireless network within your vehicle, thereby allowing other devices (such as personal computers or phones) in your vehicle to speak to each other , share files or play games.
W ireless & Internet USB Mobile Broadband Instead of using W i-Fi, your system can also use a USB mobile broadband connection to access the internet. (Y ou must turn on your mobile broadband device on your personal computer before connecting it to the system.
Help Press the Settings icon > Help, then select from the following: Help Where Am I? View your vehicle’ s current location, if your vehicle is equipped with navigation. If your vehicle is not equipped with navigation, nothing displays. System Information T ouchscreen system serial number .
T o access Help using the voice commands, press the voice button, then, after the tone, say “Help”. The system provides allowable voice commands for the current mode. CLIMA TE Press the lower right corner on the touchscreen to access your climate control features.
D. Rear: T ouch to access the rear climate control. Rear climate control settings appear at the bottom of the screen. • T ouch the power icon to turn the rear climate control functions off and on. • T ouch Rear Control to allow the rear seat passengers to adjust the rear climate settings.
J. Defrost: T ouch to clear the windshield of fog and thin ice. T ouch again to return to the previous airflow selection. When on, defrost: • Provides outside air to reduce window fogging. • Distributes air through the windshield defroster vents and demister vents.
There are additional climate control commands but in order to access them, you have to say “Climate” first, then when the system is ready to listen, you may say any of the following commands: Addi.
NA VIGA TION SYSTEM (IF EQUIPPED) Note: The navigation SD card must be in the SD card slot to operate the navigation system. If you need a replacement SD card, see your authorized dealer . Note: The SD card slot is spring-loaded. T o remove the SD card, just push the card in and release it.
3. Choose from up to three different types of routes, and then select Start Route. • Fastest Route: Uses the fastest moving roads possible. • Shortest Route: Uses the shortest distance possible. • Eco Route: Uses the most fuel-efficient route. Y ou can cancel the route or have the system demo the route for you.
W ithin these main categories, there are subcategories which contain more listings: Subcategories Restaurant Golf Parking Home & Garden Personal Care Services Automobile Dealership Govt. Office Public T ransit Education T o expand these listings, press the + in front of the point of interest listing.
This screen displays point of interest icons, such as: Hotel Coffeehouse Food & Drink Nightlife Attraction This icon appears when your selection exists in multiple categories within the system.
When you are viewing more information for hotels, cityseekr also tells you if the hotel has certain services and facilities using icons. Hotel Services and Facilities Restaurant 24 Hr Room Service Bus.
Setting Y our Navigation Preferences Select settings for the system to take into account when planning your route. Press the Settings icon > Settings > Navigation. When you select: Y ou can: Map Preferences T urn breadcrumbs on and off. Have the system display your turn list top to bottom or bottom to top.
When you select: Y ou can: T raffic Preferences Choose how you want the system to handle traffic problems along your route. Automatic: Have the system reroute you to avoid traffic incidents that develop and impact the current route (no notification is provided).
Change the appearance of the map display by repeatedly pressing the arrow button in the upper left corner of the screen. It toggles between three different map modes: Heading up, North up, and 3D. Heading up (2D map) always shows the direction of forward travel to be upward on the screen.
Map Icons V ehicle mark shows the current location of your vehicle. It stays in the center of the map display , except when in scroll mode. Scroll cursor allows you to scroll the map; the fixed icon is in the center of the screen. The map position closest to the cursor is in a window on the top center part of the screen.
Quick-touch Buttons When in map mode, touch anywhere on the map display to access the following options: When you select: Y ou can: Set as Dest Select a scrolled location on the map as your destination. (Y ou may scroll the map by pressing your index finger on the map display .
Navteq is the digital map provider for the navigation application. If you find map data errors, you may report them directly to Navteq by going to http://mapreporter .navteq.com. Navteq evaluates all reported map errors and responds with the result of their investigation by e-mail.
3 If you have said the command, “Navigation”, you may say any of the above commands or commands in the following Navigation chart. “DESTINA TION” “<nametag>” “<POI category>.
GENERAL INFORMA TION SYNC® End User License Agreement (EULA) • Y ou have acquired a device (“DEVICE”) that includes software licensed by FORD MOTOR COMP ANY from an affiliate of Microsoft Corporation (“MS”).
DESCRIPTION OF OTHER RIGHTS AND LIMIT A TIONS: • Speech Recognition: If the SOFTW ARE includes speech recognition component(s), you should understand that speech recognition is an inherently statistical process and that recognition errors are inherent in the process.
• Security Updates/Digital Rights Management: Content owners use the WMDRM technology included in your DEVICE to protect their intellectual property , included copyrighted content. Portions of the SOFTW ARE on your DEVICE use WMDRM software to access WMDRM-protected content.
If FORD MOTOR COMP ANY or third party software and services suppliers provide or make available to you Supplemental Components and no other EULA terms are provided along with the Supplemental Components, then the terms of this EULA shall apply .
INTELLECTUAL PROPER TY RIGHTS: All title and intellectual property rights in and to the SOFTW ARE (including but not limited to any images, photographs, animations, video, audio, music, text and “ap.
No Liability for Certain Damages: EXCEPT AS PROHIBITED BY LA W , FORD MOTOR COMP ANY , ANY THIRD P ARTY SOFTW ARE OR SERVICES SUPPLIERS, MS, MICROSOFT CORPORA TION AND THEIR AFFILIA TES SHALL HA VE NO.
W ARNING: Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences. Do not change system settings or enter data non-verbally (using your hands) while driving.
Navigation Features Any navigation features included in the system are intended to provide turn by turn instructions to get you to a desired destination. Please make certain all persons using this system carefully read and follow instructions and safety information fully .
T eleNav Software End User License Agreement Please read these terms and conditions carefully before you use the T eleNav Software. Y our use of the T eleNav Software indicates that you accept these terms and conditions.
3. Software License Subject to your compliance with the terms of this Agreement, T eleNav hereby grants to you a personal, non-exclusive, non-transferable license (except as expressly permitted below .
4. Disclaimers T o the fullest extent permissible pursuant to applicable law , in no event will T eleNav , its licensors and suppliers, or agents or employees of any of the foregoing, be liable for any decision made or action taken by you or anyone else in reliance on the information provided by the T eleNav Software.
NOTWITHST ANDING ANY DAMAGES THA T YOU MIGHT INCUR FOR ANY REASON WHA TSOEVER (INCLUDING, WITHOUT LIMIT A TION, ALL DAMAGES REFERENCED HEREIN AND ALL DIRECT OR GENERAL DAMAGES IN CONTRACT , TORT (INCL.
8. Miscellaneous 8.1 This Agreement constitutes the entire agreement between T eleNav and you with respect to the subject matter hereof. 8.2 Except for the limited licenses expressly granted in this A.
9. Other V endors T erms and Conditions The T eleNav Software utilizes map and other data licensed to T eleNav by third party vendors for the benefit of you and other end users.
TERMS AND CONDITIONS License Limitations on Use: Y ou agree that your license to use this Data is limited to and conditioned on use for solely personal, noncommercial purposes, and not for service bureau, timesharing or other similar purposes.
No W arranty: This Data is provided to you “as is”, and you agree to use it at your own risk. NT and its licensors (and their licensors and suppliers) make no guarantees, representations or warran.
Entire Agreement: These terms and conditions constitute the entire agreement between NT (and its licensors, including their licensors and suppliers) and you pertaining to the subject matter hereof, and supersedes in their entirety any and all written or oral agreements previously existing between us with respect to such subject matter .
If the Contracting Officer , federal government agency , or any federal official refuses to use the legend provided herein, the Contracting Officer , federal government agency , or any federal official must notify NA VTEQ prior to seeking additional or alternative rights in the Data.
Y ou agree that your non-exclusive licenses to use the Gracenote Content, Gracenote Data, the Gracenote Software, and Gracenote Servers will terminate if you violate these restrictions. If your licenses terminate, you agree to cease any and all use of the Gracenote Content, Gracenote Data, the Gracenote Software, and Gracenote Servers.
NEITHER GRACENOTE W ARRANTS THE RESUL TS THA T WILL BE OBT AINED BY YOUR USE OF THE GRACENOTE SOFTW ARE OR ANY GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENT AL DAMAGES OR FOR ANY LOST PROFITS OR LOST REVENUES FOR ANY REASON WHA TSOEVER.
911 Assist™ .............................. 399 A ABS (see Brakes) ..................... 180 Accessing and using your USB port ....................................377 Accessing your calendar ..........399 Accessory delay .......................... 96 Adaptive Cruise Control .
C Capacities for refilling fluids .... 321 Cargo management system ...... 211 Cargo net ................................... 210 CD .............................................. 125 CD player .......................... 123, 376 CD voice commands .....
Emergency brake (see Parking brake) .................. 180 Emission control system .......... 163 End user license agreement .... 430 Engine ........................................ 320 cleaning ................................... 283 coolant ........
I Ignition ....................................... 320 Illuminated visor mirror ............. 99 Information displays ................. 108 Inspection/maintenance (I/M) testing ........................................ 165 Instrument panel cleaning ...
O Octane rating ............................ 158 P Pairing other phones ................ 385 Pairing your phone ................... 385 Pairing your phone for the first time .................................... 385 Parental MyKey programming ... 63 Parking brake .
Belt-Minder®, deactivating/activating ............. 40 extension assembly ..................37 for adults ............................. 34, 36 for children .........................19, 24 Occupant Classification Sensor ...............................
T T emperature control (see Climate control) .......127, 414 T ext messaging ......................... 388 T ilt steering wheel ................ 82–83 T ires ........................... 292–293, 313 alignment ................................ 306 care .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Lincoln MKX (2013) è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Lincoln MKX (2013) - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Lincoln MKX (2013) imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Lincoln MKX (2013) ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Lincoln MKX (2013), ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Lincoln MKX (2013).
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Lincoln MKX (2013). Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Lincoln MKX (2013) insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
