Manuale d’uso / di manutenzione del prodotto SVM160-B del fabbricante Lincoln Electric
Vai alla pagina of 126
PO WER MIG ™ 300 SER VICE MANUAL Safety Depends on You Lincoln arc welding and cutting equipment is designed and built with safety in mind. However, your overall safety can be increased by proper installation ... and thought- ful operation on your part.
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC FOR ENGINE powered equipment. 1.a. Turn the engine off before troubleshooting and maintenance work unless the maintenance work requires it to be running. ____________________________________________________ 1.
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ii SAFETY ii ARC RA YS can burn. 4.a. Use a shield with the proper filter and cover plates to protect your eyes from sparks and the rays of the arc when welding or observing open arc welding.
POWER MIG 300 Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC FOR ELECTRICALL Y powered equipment. 8.a. Turn off input power using the disconnect switch at the fuse box before working on the equipment. 8.b. Install equipment in accordance with the U.
POWER MIG 300 Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC iv SAFETY iv PRÉCAUTIONS DE SÛRETÉ Pour votre propre protection lire et observer toutes les instruc.
6 6 MASTER T ABLE OF CONTENTS FOR ALL SECTIONS Page Safety .................................................................................................................................................i-iv Installation .............................
A-1 A-1 T ABLE OF CONTENTS - INST ALLA TION SECTION - INSTALLATION ...................................................................................................................... Section A Technical Specifications ..............................
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC A-2 A-2 INST ALLA TION Input.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC A-3 A-3 INST ALLA TION ONL Y QUALIFIED PERSONNEL SHOULD INST ALL, USE OR SERVICE THIS EQUIP- MENT .
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC A-4 A-4 INST ALLA TION FIGURE A.2 — Receptacle Diagram CONNECT TO A SYSTEM GROUNDING WIRE.
A-5 GUN AND CABLE INST ALLA TION A Magnum 300 gun and 15Ft.(4.6m) cable (12Ft.(3.7m) for Codes 11000 and below) are provid- ed with the POWER MIG 300. A Magnum cable liner for .035-.045" (0.9-1.2 mm) electrode and contact tips for .035” (0.9mm) and .
POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC INST ALLA TION A-6 A-6 DO NOT ATTACH THE REGULATOR IF OIL, GREASE OR DAMAGE IS PRESENT! Inform your gas supplier of this condition.
POWER MIG 300 Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC B-1 B-1 T ABLE OF CONTENTS - OPERA TION SECTION - Operation .............................................................................................
POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC B-2 B-2 OPERA .
POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC B-3 B-3 OPERA TION PRODUCT DESCRIPTION The POWER MIG 300 is a complete semiautomatic multi-process DC arc welding machine offering CV and CC DC welding.
POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC 5. MULTI-PROCESS PANEL - This panel enables selection of weld modes as well as adjustment of certain weld parameters within each weld mode.
POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC B-5 B-5 OPERA .
POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC B-6 B-6 OPERA .
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC B-7 B-7 OPERA TION POWER MIG 300 Arc Control (See Table B.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC B-8 B-8 OPERA TION POWER MIG.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC B-9 B-9 OPERA TION POWER MIG 300 5. Rotate the spindle and adapter so the retaining spring is at the 12 o'clock position.
POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC B-10 B-10 OPERA TION 4.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC B-1 1 B-1 1 OPERA TION POWER.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC B-12 B-12 OPERA TION POWER M.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC B-13 B-13 OPERA TION POWER M.
B-14 NOTES POWER MIG 300 B-14 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TO.
POWER MIG 300 C-1 C-1 T ABLE OF CONTENTS - ACCESSORIES - Accessories ........................................................................................................................... Section C Drive Roll Kits ................................
POWER MIG 300 C-2 C-2 ACCESSORIES DRIVE ROLL KITS Refer to Table C.1 for various drive roll kits that are available for the POWER MIG. All items in Bold are supplied standard with the POWER MIG. TABLE C.1 * .035 Aluminum recommended for Push-Pull systems only.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC C-3 C-3 ACCESSORIES Non-Synergic Weld Modes (Mode 5) • Voltage is adjustable at the power source.
C-4 C-4 NOTES POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC.
POWER MIG 300 D-1 D-1 T ABLE OF CONTENTS -MAINTENANCE- Maintenance .......................................................................................................................... Section D Safety Precautions & General Maintenance ......
POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC D-2 D-2 MAINTENANCE CONT ACT TIP AND GAS NOZZLE INST ALLA TION a.
D-3 D-3 MAINTENANCE 5. Seat Liner bushing into back of gun. Secure Liner by tightening set screw. Do not install the gas dif- fuser at this time. 6. Lay the cable straight and trim Liner to 9/16”. Remove burrs. 7. Secure the gas diffuser into the tube.
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC Section E-1 Section E-1 POWER MIG 300 Theory of Operation ............................................................................................................ .
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC GENERAL DESCRIPTION The Power MIG 300 is a complete semiautomatic, multi-process DC arc welding machine offering CV and CC DC welding.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC INPUT VOL T AGE AND MAIN TRANS- FORMER Single-phase input power is brought into the rear of the Power MIG 300 through a three-prong plug and input cable.
THEOR Y OF OPERA TION E-4 E-4 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Retur.
DIODE CONTROL RECTIFIER AND POWER BOARD The Power Board receives approximately 40 VDC from the Diode Control Rectifier . In turn, the Power Board supplies a variety of regulated DC voltages to the Weld Control Board, which it uses to power its many circuits and communication functions.
WELD CONTROL BOARD The Weld Control Board performs the primary interfac- ing functions to establish and maintain output control of the Power MIG 300 machine. The function generator and weld files reside within the Weld Control Board hardware and software.
E-7 E-7 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC WIRE DRIVE MOT OR AND FEED- BACK The Wire Drive Motor is controlled by the Feeder Board and the Weld Control Board.
THERMAL PROTECTION T wo normally closed (NC) thermostats protect the machine from excessive operating temperatures. These thermostats are wired in series and are con- nected to the Weld Control board. One of the ther- mostats is located on the Chopper Assembly board, and one is on the secondary of the Main T ransformer .
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC THEOR Y OF OPERA TION E-9 E-9 POWER MIG 300 FIGURE E.
PULSE WIDTH MODULA TION The term PULSE WIDTH MODULA TION is used to describe how much time is devoted to conduction in the positive and negative portions of the cycle.
CHOPPER TECHNOLOGY FUNDAMENT ALS The new era of welding machines such as the Power MIG 300 employ a technology whereby a DC source is turned on and off (chopped up) at high speed, then smoothed through an inductor to control an arc. Hence the name “Chopper .
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC Section F-1 Section F-1 POWER MIG 300 T roubleshooting & Repair Section ................................................................................ Section F How to Use T roubleshooting Guide .
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC HOW T O USE TROUBLESHOOTING GUIDE Service and repair should be performed by only Lincoln Electric Factory T rained Personnel.
POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROUBLESHOOTING & REP AIR F-3 F-3 Sometimes machine failures appear to be due to PC board failures.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROUBLESHOOTING & REP AI.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROUBLESHOOTING & REP AIR F-5 F-5 POWER MIG 300 TROUBLESHOOTING GUIDE Observe Safety Guidelines detailed in the beginning of this manual.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROUBLESHOOTING & REP AI.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROUBLESHOOTING & REP AIR F-7 F-7 POWER MIG 300 TROUBLESHOOTING GUIDE Observe Safety Guidelines detailed in the beginning of this manual.
F-8 F-8 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROUBL.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROUBLESHOOTING & REP AI.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROUBLESHOOTING & REP AI.
F-11 F-11 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROU.
CHOPPER BOARD CAP ACIT OR DISCHARGE PROCEDURE Service and repair should be performed by only Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty .
TROUBLESHOOTING & REP AIR F-13 F-13 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC CHOPPER BOARD CAP ACIT OR DISCHARGE PROCEDURE (continued) FIGURE F .
MAIN TRANSFORMER TEST Service and repair should be performed by only Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty .
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROUBLESHOOTING & REP AIR F-15 F-15 POWER MIG 300 MAIN TRANSFORMER TEST (continued) FIGURE F .
CHOPPER BOARD TEST Service and repair should be performed by only Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty .
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROUBLESHOOTING & REP AIR F-17 F-17 POWER MIG 300 CHOPPER BOARD TEST (continued) FIGURE F .
TROUBLESHOOTING & REP AIR F-18 F-18 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC CHOPPER BOARD TEST (continued) FIGURE F .
CONTROL RECTIFIER TEST Service and repair should be performed by only Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty .
TROUBLESHOOTING & REP AIR F-20 F-20 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC CONTROL RECTIFIER TEST (continued) FIGURE F .
OUTPUT RECTIFIER ASSEMBL Y TEST Service and repair should be performed by only Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty .
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROUBLESHOOTING & REP AIR F-22 F-22 POWER MIG 300 OUTPUT RECTIFIER ASSEMBL Y TEST (continued) FIGURE F .
WIRE DRIVE MOT OR AND T ACHOMETER FEEDBACK TEST Service and repair should be performed by only Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty .
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROUBLESHOOTING & REP AIR F-24 F-24 POWER MIG 300 WIRE DRIVE MOT OR AND T ACHOMETER FEEDBACK TEST (continued) FIGURE F .
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROUBLESHOOTING & REP AI.
ENCODER PC BOARD TEST (FOR CODES ABOVE 10562) Service and repair should be performed by only Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty .
F-27 F-27 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROUBLESHOOTING & REP AIR ENCODER PC BOARD TEST (continued) G3884 J82 3243 J85 858 857 855 851 1 8510 859 FIGURE F .
TROUBLESHOOTING & REP AIR F-28 F-28 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master.
CURRENT TRANSDUCER TEST Service and repair should be performed by only Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty .
TROUBLESHOOTING & REP AIR F-30 F-30 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC CURRENT TRANSDUCER TEST (continued) FIGURE F .
TROUBLESHOOTING & REP AIR F-31 F-31 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC CURRENT TRANSDUCER TEST (continued) T ABLE F .
POWER MIG 300 SCROLLING DASHES TEST Service and repair should be performed by only Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty .
TROUBLESHOOTING & REP AIR F-33 F-33 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC POWER MIG 300 SCROLLING DASHES TEST (continued) TEST PROCEDURES: For Machines with code 10952, 10958 and 1 1000.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROUBLESHOOTING & REP AIR F-34 F-34 POWER MIG 300 This is a typical DC output voltage waveform generated from a properly operating machine.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROUBLESHOOTING & REP AIR F-35 F-35 POWER MIG 300 SCOPE SETTINGS V olts/Div .
MOT OR & GEAR BOX ASSEMBL Y REMOV AL AND REPLACEMENT Service and repair should be performed by only Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty .
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC TROUBLESHOOTING & REP AIR F-37 F-37 POWER MIG 300 MOT OR & GEAR BOX ASSEMBL Y REMOV AL AND REPLACEMENT (continued) REMOV AL PROCEDURE ELECTRIC SHOCK can kill .
TROUBLESHOOTING & REP AIR F-38 F-38 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC MOT OR & GEAR BOX ASSEMBL Y REMOV AL AND REPLACEMENT (continued) FIGURE F .
TROUBLESHOOTING & REP AIR F-39 F-39 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC MOT OR & GEAR BOX ASSEMBL Y REMOV AL AND REPLACEMENT (continued) FIGURE F .
OUTPUT RECTIFIER REMOV AL AND REPLACEMENT Service and repair should be performed by only Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty .
TROUBLESHOOTING & REP AIR F-41 F-41 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC OUTPUT RECTIFIER REMOV AL AND REPLACEMENT (continued) ELECTRIC SHOCK can kill .
TROUBLESHOOTING & REP AIR F-42 F-42 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC OUTPUT RECTIFIER REMOV AL AND REPLACEMENT (continued) 9.
CHOPPER BOARD ASSEMBL Y REMOV AL AND REPLACEMENT Service and repair should be performed by only Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty .
TROUBLESHOOTING & REP AIR F-44 F-44 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC CHOPPER BOARD ASSEMBL Y REMOV AL AND REPLACEMENT (continued) FIGURE F .
TROUBLESHOOTING & REP AIR F-45 F-45 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC CHOPPER BOARD ASSEMBL Y REMOV AL AND REPLACEMENT (continued) REPLACEMENT PROCEDURE 1.
TROUBLESHOOTING & REP AIR F-46 F-46 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master.
REMOV AL PROCEDURE ELECTRIC SHOCK can kill . High voltage is present when input power is applied to the machine. NOTE: Cut cable ties as needed to improve access. PREP ARA TION 1. Disconnect main input power from the machine. 2. Remove the case side panels using a 3/8 in.
TROUBLESHOOTING & REP AIR F-48 F-48 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC MAIN TRANSFORMER AND OUTPUT CHOKE REMOV AL AND REPLACEMENT (continued) LEAD DISCONNECTION 8.
TROUBLESHOOTING & REP AIR F-49 F-49 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC MAIN TRANSFORMER AND OUTPUT CHOKE REMOV AL AND REPLACEMENT (continued) FIGURE F .
TROUBLESHOOTING & REP AIR F-50 F-50 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master.
TROUBLESHOOTING & REP AIR F-51 F-51 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC F AN MOTOR ASSEMBL Y REMOV AL AND REPLACEMENT (continued) FIGURE F .
VOL T AGE & CURRENT CALIBRA TION PROCEDURE Service and repair should be performed by only Lincoln Electric factory trained personnel. Unauthorized repairs performed on this equipment may result in danger to the technician or machine operator and will invalidate your factory warranty .
TROUBLESHOOTING & REP AIR F-53 F-53 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master.
TROUBLESHOOTING & REP AIR F-54 F-54 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC VOL T AGE & CURRENT CALIBRA TION PROCEDURE (continued) 9.
TROUBLESHOOTING & REP AIR F-55 F-55 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master.
TROUBLESHOOTING & REP AIR F-56 F-56 POWER MIG 300 Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC VOL T AGE & CURRENT CALIBRA TION PROCEDURE (continued) 9.
RETEST AFTER REP AIR Retest a machine: • If it is rejected under test for any reason that requires you to remove any part which could affect the machine’s electrical characteristics.
G-1 ELECTRICAL DIAGRAMS G-1 T ABLE OF CONTENTS -ELECTRICAL DIAGRAMS SECTION- ELECTRICAL DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SECTION G WIRING DIAGRAM (CODE 10562 ONL Y -G3852).
ELECTRICAL DIAGRAMS G-2 POWER MIG 300 WIRING DIAGRAM - POWER MIG 300 CODE 10562 ONL Y ALL CASE FRONT COMPONE NTS SHOW N VIEWED FROM REAR. PA NE L R ECEPTACL E CA VITY NU MBERING S EQUE NC E (V IEW ED .
ELECTRICAL DIAGRAMS G-3 POWER MIG 300 WIRING DIAGRAM - POWER MIG 300 CODE 10952 ONL Y ALL CASE FRONT COMPONE NTS SHOW N VIEWED FROM REAR. PA NE L R ECEPTACL E CA VITY NU MBERING S EQUE NC E (V IEW ED .
ELECTRICAL DIAGRAMS G-4 POWER MIG 300 WIRING DIAGRAM - POWER MIG 300 CODE 10958 AND 1 1000 ONL Y ALL CASE FRONT COMPONE NTS SHOW N VIEWED FROM REAR. PA NE L R ECEPTACL E CA VITY NU MBERING S EQUE NC E.
ELECTRICAL DIAGRAMS G-5 POWER MIG 300 WIRING DIAGRAM - POWER MIG 300 CODE 1 1097 AND 1 1098 ONL Y J4 1 2 3 4 5 6 7 8 9 10 11 12 J3 1 2 3 4 5 6 7 8 9 10 J7 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 J 9 1 .
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ELECTRICAL DIAGRAMS G-6 POWE.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ELECTRICAL DIAGRAMS G-7 POWE.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ELECTRICAL DIAGRAMS G-8 POWER MIG 300 SCHEMA TIC - DIGIT AL CONTROL PC BOARD #1 - CODE 10562 - 1 1098 G-8 NOTE: This diagram is for reference only .
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ELECTRICAL DIAGRAMS G-9 POWER MIG 300 SCHEMA TIC - DIGIT AL CONTROL PC BOARD #2 - CODE 10562 - 1 1098 G-9 NOTE: This diagram is for reference only .
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ELECTRICAL DIAGRAMS G-10 POWER MIG 300 SCHEMA TIC - DIGIT AL CONTROL PC BOARD #3 - CODE 10562 - 1 1098 G-10 NOTE: This diagram is for reference only .
ELECTRICAL DIAGRAMS G-11 POWER MIG 300 SCHEMA TIC - DIGIT AL CONTROL PC BOARD #4 - CODE 10562 - 1 1098 G-11 NOTE: This diagram is for reference only . It may not be accurate for all machines covered by this manual.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ELECTRICAL DIAGRAMS G-12 POWER MIG 300 SCHEMA TIC - POWER SUPPL Y PRINTED CIRCUIT BOARD - CODE 10562 - 1 1098 .
ELECTRICAL DIAGRAMS G-13 POWER MIG 300 SCHEMA TIC - CHOPPER BOARD - CODE 10562 - 1 1098 G-13 NOTE: This diagram is for reference only . It may not be accurate for all machines covered by this manual.
ELECTRICAL DIAGRAMS G-14 POWER MIG 300 SCHEMA TIC - MSP3 PC BOARD - CODE 10562 - 1 1098 G-14 NOTE: This diagram is for reference only . It may not be accurate for all machines covered by this manual.
NOTE: Lincoln Electric assumes no responsibility for liablilities resulting from board level troubleshooting. PC Board repairs will invalidate your factory warranty . Individual Printed Circuit Board Components are not available from Lincoln Electric.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ELECTRICAL DIAGRAMS G-16 POWER MIG 300 SCHEMA TIC - FEEDER PC BOARD BOARD - CODE 10562 - 1 1098 - SHEET 1 G-16 NOTE: This diagram is for reference only .
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ELECTRICAL DIAGRAMS G-17 POWER MIG 300 SCHEMA TIC - FEEDER PC BOARD BOARD - CODE 10562 - 1 1098 - SHEET 2 G-17 NOTE: This diagram is for reference only .
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ELECTRICAL DIAGRAMS G-18 POWER MIG 300 SCHEMA TIC - SPOOL GUN PC BOARD - CODE 10562 - 1 1098 - SHEET 1 G-18 NOTE: This diagram is for reference only .
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC ELECTRICAL DIAGRAMS G-19 POWER MIG 300 SCHEMA TIC - SPOOL GUN PC BOARD - CODE 10562 - 1 1098 - SHEET 2 G-19 NOTE: This diagram is for reference only .
ELECTRICAL DIAGRAMS G-20 POWER MIG 300 SCHEMA TIC - ENCODER PC BOARD - CODE 10562 ONL Y G-20 NOTE: This diagram is for reference only . It may not be accurate for all machines covered by this manual.
NOTE: Lincoln Electric assumes no responsibility for liablilities resulting from board level troubleshooting. PC Board repairs will invalidate your factory warranty . Individual Printed Circuit Board Components are not available from Lincoln Electric.
ELECTRICAL DIAGRAMS G-22 POWER MIG 300 SCHEMA TIC - DISPLA Y PC BOARD - CODE 10562 - 1 1098 G-22 NOTE: This diagram is for reference only . It may not be accurate for all machines covered by this manual.
NOTE: Lincoln Electric assumes no responsibility for liablilities resulting from board level troubleshooting. PC Board repairs will invalidate your factory warranty . Individual Printed Circuit Board Components are not available from Lincoln Electric.
SVM ERROR REPORTING FORM We need to know if there are errors in our manuals. W e also value any suggestions as to additional tests or procedures that would make this SVM a better tool for you.
PO WER MIG 300 SVM160-B.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Lincoln Electric SVM160-B è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Lincoln Electric SVM160-B - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Lincoln Electric SVM160-B imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Lincoln Electric SVM160-B ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Lincoln Electric SVM160-B, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Lincoln Electric SVM160-B.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Lincoln Electric SVM160-B. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Lincoln Electric SVM160-B insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
