Manuale d’uso / di manutenzione del prodotto LAC-7700R del fabbricante LG
Vai alla pagina of 24
LAC7700R_ENG_FS_CI_NEW P/NO : MFL36538207 R LAC7700R /7710R ENGLISH CAR CD/MP3/WMA Receiver Read the manual carefully before using the unit GERMAN Auto-CD-/MP3-/WMA-Receiver Lesen Sie diese Bedienungs.
2 The lightning flash with the arrowhead symbol, within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
3 8 cm • A defective or soiled disc inserted into unit can cause sound to drop out during playback. • Handle the disc by holding its inner and outer edges. • Do not touch the surface of the unlabeled side of the disc. Do not stick paper or tape etc.
4 Safety note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 T able of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Detaching the control panel Y ou can detach the control panel when leaving the car . When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder . 1. Press the “ ” button to unlock the control panel.
6 Control panel 1[ SOURCE ] 2 • Skip / Search I I / i i • Seek/ T une • Auto Store [ AS ] • Preset Scan [ PS ] • MP3 T rack +10/-10 U U / u u • Folder Up/Down U U / u u 3 Remote Sensor 4 .
7 1 Remove the battery holder with a sharp product like a ball point pen. 2 Install the battery on the battery holder . 3 Install the battery holder back into its original position. Note • Use only one CR2025 (3V) lithium battery . • Remove the battery if the remote control is not used for a long period of time.
8 Before connecting, make sure that the ignition switch is set to OFF , and remove the battery # terminal to avoid short circuits. BA TTERY PO WER Antenna DIMMER SWITCH IGNITION SWITCH CONTROL RELA Y .
9 A A From antenna B B T o the wiring of the vehicle colors of leads. • BLACK: This lead is for the ground connection. • ORANGE: This lead is for the phone line connection. • PINK: This lead is for the dimmer line connection. • RED: This lead is for connection to the power supply terminal when the ignition switch is set to ACC.
10 T urning the unit on Press MUTE/PWR ( POWER/ on the remote control) or any other button. Note When you insert the CD in the CD slot, the unit turns on. T urning the unit off Press and hold MUTE/PWR ( POWER/ on the remote control). Insert a disc 1 Press to open the control panel.
11 Changing the general settings 1 Press and hold MENU/SEL ( MENU/SEL on remote control) so that one of menu items appears. 2 Press MENU/SEL ( MENU/SEL on remote control) to scroll between menus.
12 AUX (Auxiliary) ON / OFF It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. AUX ON When using a auxiliary equipment. AUX OFF When not using a auxiliary equipment.
13 Adjusting the sound level 1 Press MENU/SEL ( MENU/SEL on the remote control) repeatedly to select the mode you want to adjust from volume, bass, middle, treble, balance and fader . The indicator lights up in the following order . VOL t BAS t MID t TRB t BAL t FA D 2 Rotate the MUTE/PWR.
14 Bluetooth operation Using a Bluetooth wireless connection Y our unit supports Bluetooth wireless connections. Y ou can set up a wireless link with Bluetooth phone. Starting Bluetooth on your phone Y our phone’s Bluetooth feature may be set to of f by default.
15 Auto Connection On / Off ON : Bluetooth phone with a previous record showing that it has successfully connected will automatically start the connection process when starting the car . OFF : Cancels the function. Auto Answer On / Off ON : If you set the automatic answering function on, hands-free answering call is possible.
16 Missed call notification When an incoming call is not answered, the missed call message is displayed on the your screen. 1 The “ ” appears on the screen. 2 Press B/T to place a call. 3 Press B/T to place a call to entered phone number. 4 T o end the call and hang up the phone, press and hold B/T button.
17 Storing a call number in last answered. If you press any of the preset button 1~6, you can easily store up to 6 phone numbers and laster recall with the press the button. 1 Press B/T to enter the menu. 2 Press U U /AS or u u /PS up or down to select the call number.
18 HSP HSP is short for Head Set Profile. This profile is used for connecting a headset and for communicating terminal wireless technology . GA VDP This profile uses an Initiator (INT), a device (such as a portable player) that initiates a signalling procedure to send a request to an Acceptor (ACP), - such as headphones etc.
19 RDS operarion Note • Up to 18 FM stations, 6 for each of three FM bands and 6 MW(AM) stations can be stored in the memory . • When a station is stored on the preset numbers on which another station of the same band has already been preset, the previously preset station is automatically erased.
20 Playing an Audio CD and MP3/WMA Disc The unit can play MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on page 4. If you change the source, CD play also stops (without ejecting the CD).
21 Intro scan The first 10 seconds of each tracks/files ( SCAN ) or each files in the current selected folder ( SCAN ) on the disc are played. 1 Press SCAN . – SCAN (or SCAN ) appears on the display window . Press and hold SCAN for about 2 seconds during playback.
22 T o go to a particular quickly ( +10/-10 buttons) (If there is no folder or one folder .) Press U U /AS ( U U on remote control) to skip to the next 10 track, and press u u /PS ( u u on remote control) to skip to the previous 10 track. T o skip to the next or previous folder (If there are more than two folders.
23 T roubleshooting : Symptom / : Cause : Correction Power doesn’t turn on. / The unit doesn’t operate. Leads and connectors are not properly connected. Confirm once more that all connections are correct. The fuse is blown. Rectify the problem that caused the fuse to blow , and then replace it.
24 AUX SECTION Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Hz-20 kHz S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il LG LAC-7700R è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del LG LAC-7700R - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso LG LAC-7700R imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul LG LAC-7700R ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il LG LAC-7700R, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del LG LAC-7700R.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il LG LAC-7700R. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo LG LAC-7700R insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
