Manuale d’uso / di manutenzione del prodotto FCS-3101 del fabbricante LevelOne
Vai alla pagina of 54
Network Camera User ’ s Manual 1/ 54 FCS-3101 2-Megapixel D ay/Night P oE Mini Dome Network Camera User Manual Version 1.0.
Network Camera User ’ s Manual 2/ 54 Table of Contents Overview ............................................................................................................... 3 Package Contents ......................................................
Network Camera User ’ s Manual 3/ 54 2-Megapixel Day/Night PoE Mini Dome Net w ork Cam era Overview FCS-3 101 is a 2-Megapixel Day/Night PoE Mini Dom e Network Camera .
Network Camera User ’ s Manual 4/ 54 Package Conten ts If any of the abov e items are missin g, please contact y our dealer immedi ately. Note : Using a power s upply with a different vol tage than the one includ ed with the Network Camera will cause damage and void the warranty for this p roduct.
Network Camera User ’ s Manual 5/ 54 Connections Hard w are description Outer Vie w Inner View Wired cover Slide cover Light sensor Lens IR LED Mi cro SD/SDHC card slot Reset button Internal.
Network Camera User ’ s Manual 6/ 54 Hardware In stallation 1. Attach the Ne twork Camera with the includ ed stand 2. Place the Came ra fix it onto ce iling or wall Use screws to fix the Netw ork Camera onto the c eiling or wal l.
Network Camera User ’ s Manual 7/ 54 3. Power over E thernet (PoE) Using a PoE-enabled switch The Network Came ra is PoE-compli ant, allow ing transmission of pow er and data via a single Etherne t cable. Foll ow the below i llustration to connect the Network Camera to a PoE-enabled sw itch via Ethernet cable.
Network Camera User ’ s Manual 8/ 54 Connect to t he Network Camera Inst all the IP Finder program When y ou instal led y our Network camera on your LA N env ironment , you may install ―IP Finder‖ to discover Netw ork camera’s IP address.
Network Camera User ’ s Manual 9/ 54 ―IP Finder‖ is used to search the IP address of N etwork Cameras or Video servers on a LAN. After searching, Video Serv ers or Network Cameras will be located by the IP Finder.
Network Camera User ’ s Manual 10 / 54 Search Camera Click search Camera button, The program will search for all family network devices on the same LAN. After search ing, the main installer w indow will pop up. Click on the MAC and model name which matches the product label on your device to connect to the Network Camera via Internet Explorer.
Network Camera User ’ s Manual 11 / 54 Setup Camera Auto Install W izard w ill be started and that it can auto guide through the installation process. Press the “Next” button execute next process. For more information, pl ease refer to the Network section on pa ge 33.
Network Camera User ’ s Manual 12 / 54.
Network Camera User ’ s Manual 13 / 54.
Network Camera User ’ s Manual 14 / 54.
Network Camera User ’ s Manual 15 / 54 Bonjour program Safari brow ser supports Bonjour search pro gram the wi ll search for all family network devices on the same LAN.
Network Camera User ’ s Manual 16 / 54 ip -discovery .c om(Free DDNS service) 1. W hen you want to connect the network ca mera over Internet, you can use the service ― C2.mylevel1.com ‖. The ―ip - discovery .co m‖ is a free DDNS server for this camera.
Network Camera User ’ s Manual 17 / 54 Initial Access to the Network Camer a (1) For the initial access to the Network Camera in W indows, the web brow ser may prompt for permission to install a new plug-in for the Networ k Camera. This plug- in has been registered for certificate and is used to display the video in the browser.
Network Camera User ’ s Manual 18 / 54 Primary user’s capability Main Screen with Camera V iew The main p age has three part s : 1. Configuration functions: The came ra can be con figured using thes e user interfaces. 2. Connection control buttons: Th ese butto ns provide the remote and local switching stream.
Network Camera User ’ s Manual 19 / 54 Vie w capabilities : 1. Click this button to ca pture and save s till images. The captured ima ges wi ll be display ed in pop-up window . Right-click the image and choose Sav e Picture As to save it in JPEG format.
Network Camera User ’ s Manual 20 / 54 Connection control buttons : 1. “Connection” User can choose R emote or Local mode for bes t connection quality. Proposal: Internet environment, switch Re mote mode. 2. “Video Stream” User can choose stream1 or stream2.
Network Camera User ’ s Manual 21 / 54 Client Settin g 1. “Video output setting” Setting video output f ormat. “Stream” Select use multiple stream video. “Picture” Select use serial video picture. 2. “Intranet Protocol Options” Setting camera in intranet mode of protocol.
Network Camera User ’ s Manual 22 / 54 and time to the end of the file name. NOTE ： Protocol Options w hich allows choi ces on connection p rotocol between client an d server . There are three p rotocols choices to op timize y our usage – UDP ,TCP ,HTTP .
Network Camera User ’ s Manual 23 / 54 Definitions in Configur ation Please note that onl y the Administ rator can access the system configuratio n. System para meters 1. “General Setting” (1) “Host name” The text display s the title on the top of the main page .
Network Camera User ’ s Manual 24 / 54 2. “Time Setting” (1) “T ime zone” Choose a time zone from the dow n arrow . (2) “Daylight saving” For summertime; It w ill be one hour ahead . (3) “Current Time” Network camera set the current time.
Network Camera User ’ s Manual 25 / 54 Security Security setting The administrator account name is ―roo t‖, which is permanent and can not be deleted. If you w ant to add more accoun ts in the M anage User column, please se t a password for the ―root‖ accoun t first.
Network Camera User ’ s Manual 26 / 54 (2) “Delete a user” Select an existin g user name. Cli ck Finish to enable the setting. (3) “Up date a existing user” Select an existing user name. Admini strators can modify user’s password and privi lege.
Network Camera User ’ s Manual 27 / 54 Network Any changes made on this p age wi ll restart the system in o rder to val idate the changes. Make sure ev ery field is en tered correctly before clicking on “finish” Network Setting “LAN” & “PPPoE” The default type i s LAN.
Network Camera User ’ s Manual 28 / 54 provides UPnP function at My Network Place) . (1) “Get IP address a utomaticall y ” (2) “Use fixed IP address” - “IP address” : This is necessary for network identification. - “Subnet mask” : This is used to determin e if the destination is in the same subnet.
Network Camera User ’ s Manual 29 / 54 server or notify the User o f the new IP add ress . Note : when this field is input as ―Use r name‖, the follow ing field must be inp ut as ―Password‖. 7 . “Password” Please input the p assw ord or key to get the DDNS serv ice.
Network Camera User ’ s Manual 30 / 54 Access list A ccess list setting 1. How to control access permission by v erifying the client PC’s IP address.
Network Camera User ’ s Manual 31 / 54 ◆ A d d a rule to configure an Allowed/Denied list: Click A dd to add a rule to Allowed/Denied list. There are three types of rules for user to set up: “Single” This rule allows the user to add an IP a ddress to the Allowed/Denied li st.
Network Camera User ’ s Manual 32 / 54 “Range” This rule allow s the user to assi gn a range of IP add resses to th e Allow/Deny List. This rule is only app lied to IPv4.
Network Camera User ’ s Manual 33 / 54 Audio and Video setting.
Network Camera User ’ s Manual 34 / 54 General Setting 1. “Color mode” Select use color or monochrome vi deo display . 2. “Video orient ation” The orienta tion of video (1) “Flip” V ertically rotate the video. (2) “Mirror” Horizontally rotates the video.
Network Camera User ’ s Manual 35 / 54 (2) “Enable dark mode” Enable low lux mode. Audio Setting 1. “Mute” Audio mute. 2 . “ Microphone ” Internal microphone. 3 . “Mic V olume” Ad just microphone volume, which ran ges from 1 to 64 . Video record Schedule mode (1) “Every day” Enable/Disable ev ery day application.
Network Camera User ’ s Manual 36 / 54 Note that the time format is [hh :mm] and is ex pressed in 24-hour cloc k time. By default, the start and end time o f day mode are set to 01:00:00 and 23:59:5 9. (2)“Sun” / “Mon” / “T ue” / “Wed” / “Thu” / “Fri” / “Sat” Select the days of the week to perfor m the application.
Network Camera User ’ s Manual 37 / 54 Stream A udio codec setting (1)“Audio codec type” There are two choi ces of audio codec types avail able: ” A MR” 、 “ AAC” and ”G.711” . (2) “ Bit rate ” -- “ A MR” The bit rates are selectable at the foll owing rates: 4750,5150,5900,6700 ,7400,7950,1020 0 and 1220 0.
Network Camera User ’ s Manual 38 / 54 these compression modes based on requiremen t or application (3) “Video size” Click t he down arrow to choos e the quali ty of image (4) “Connection type” User can selec t this button to choose the better video & links quali ty .
Network Camera User ’ s Manual 39 / 54 Application Schedule mode (1) “Every day” Enable/Disable ev ery day application. (2) “Week day ” Enable/Disable w eek day application. (3) “Selected day” Enable/Disabl e selected day application. Schedule information (1) Enter the “Start time” and “Stop time” for day mode .
Network Camera User ’ s Manual 40/ 54 (2) “Periodically” This option allow s the Netw ork Camera to trigge r periodicall y for every other de fined minute. p arameters (1) “M otion p arameters” Higher sensitiv ity and small threshold will allow easier motion de tection.
Network Camera User ’ s Manual 41 / 54 Note: Vi deo record w ith the Application mu st be set to the sa me shared dir ectory path. If y ou would li ke to do detail recording settings or multi-channel recor ding, please install bundled 64CH rec ording sof tware in CD.
Network Camera User ’ s Manual 42 / 54 Storage Manage the storage device. Sto rage S t atus Here show the storage dev ice information. NA S server setting (1) ― NAS Host name ‖ Choose and input the N AS Host nam e of this cam era. (2) ― Workgroup ‖ Input the na me of Workgrou p.
Network Camera User ’ s Manual 43 / 54 Move the mouse over the file. Press the mou se right button that Right-click menu is display ed. Y ou can delete files. Move the mouse over the di rectory . Press the mouse l eft button that the file structure exp and.
Network Camera User ’ s Manual 44 / 54 Syslog The Network ca mera support s log the system message s on remote se rver . The protocol is compliant to RFC 3164. If you have external Linux server with sys log service, use ― - r‖ optio n to turn on the facility f or receiving log from remote machine.
Network Camera User ’ s Manual 45 / 54 Status and Parameters User can find a lot of informa tion about the sy stem such as “Upnp port forwarding” , “T raversing NA T” , “Public IP” , and so on. Us er also can get the number of cu rrent view er of the Network Camera here.
Network Camera User ’ s Manual 46 / 54 Maintenance 1. “Reboot system” The “Reboot” button wi ll reboot the Netw ork Cam era. It’ s useful while the Netw ork Camera got problem . 2. “Restore system” Click on ― Resto re ‖ button on the con figuration p age to restore the factory de fault settings .
Network Camera User ’ s Manual 47 / 54 and/or network conne ction are broken du ring the proced ure, it migh t possibly cause serious da mage to the Net work Camera . Note: When upgrade firmware please wait for 90~210 seconds, and then y ou can connect to Network Camera again.
Network Camera User ’ s Manual 48 / 54 Appendix A . T roubleshooting & Frequently A sked Questions Q1: St a tus led does not light up. A1: First, make su re that 「 Con figuration>System>Turn off the LED indi cator 」 is disabled . If it is, check the item, and the led shoul d light up.
Network Camera User ’ s Manual 49 / 54 6.T ype IP address:8080 at browser . Then you can see camera throu gh Internet. 7.Y ou can also type the ddns name at below l abel of camera on browser URL field. For example, you may type ah000 01.ip-discovery .
Network Camera User ’ s Manual 50 / 54 PS. Port 80 is HTTP P ort, port 53 is stream port, port 554 is R TSP port. and port 443 is HTTPS port. 2.Go to camera Network p age.
Network Camera User ’ s Manual 51 / 54 3. T ype IP add ress at brow ser . Then y ou can see camera through Interne t. 4. Y ou can also type the ddns name at below label of camera on browser UR L field. For example, you may type ah000 01.ip-discovery .
Network Camera User ’ s Manual 52 / 54 Q6 : How can I restore the network camera to default v alue? A6 : Use a gem clip to press on the inside button . Network camera begins to restore default value. You can also press the button “Factory ” in ―Maintenance‖ page to restore the default value .
Network Camera User ’ s Manual 53 / 54 • May be due to the network cable . Try correctin g your network cable and con figuration. Test the netw ork interface by connecting a local computer to the Ne twork C amera via a crossover cable . • Make sure the Internet connecti on and settin g is ok.
Network Camera User ’ s Manual 54 / 54 B. T echnical specifications - System RAM: 4G DDR Ⅲ (3210M ) 、 2G DDR Ⅲ (3210HA) ROM: 16M B Flash ROM - Camera specification 1/2.7 inch color CMOS sen sor , Resolution: 1920x1080 1.0Lux/F2.0 AGC, A W B, AEC (3210M ) 1/4 inch color CM OS sensor , Resolutio n: 1280x800 1.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il LevelOne FCS-3101 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del LevelOne FCS-3101 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso LevelOne FCS-3101 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul LevelOne FCS-3101 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il LevelOne FCS-3101, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del LevelOne FCS-3101.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il LevelOne FCS-3101. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo LevelOne FCS-3101 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
