Manuale d’uso / di manutenzione del prodotto LSE-36R del fabbricante Lennox Hearth
Vai alla pagina of 16
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 1 36" Electric Fireplace P/N 850,019M REV. B 04/2007 LSE-36R MODELS RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE REFLECTIONS TM This installation manual will enable you to obtain a safe, efficient and dependable installation of your electric fireplace.
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 2 TOOLS AND BUILDING SUPPLIES NORMALLY REQUIRED Tools: Phillips screwdriver 7/16" Socket Drive Hammer Saw and/or sabersaw Level Measuring tape Plu.
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 3 13. Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire, or damage to the appliance. 14. To prevent a possible fire, do not block air intakes or exhausts in any way.
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 4 FRAMING SPECIFICATIONS Figure 3 Figure 4 FIREPLACE SPECIFICATIONS 38" (965 mm) (Header Location) Front View 34" (864 mm) Side View 9" .
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 5 ASSEMBLY OUTLINE Before You Start Check your inventory list to be sure you have all the necessary parts supplied in good us- able condition. Check also for any concealed damage. UNIT PRE-ASSEMBLY Before the installation can begin, two compo- nents need to be assembled.
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 6 Figure 8 Figure 10 UNIT INSTALLATION 1. Prepare the framed opening as illustrated in Framing Specification on page 4. The header location is important. Verify the minimum distance before starting the installation.
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 7 UNIT ACTIVATION At this time all connections should be made and tested to assure proper operation. 1. Locate the DVD disk for the DVD player in the envelope with these instructions. Remove the disk and set it aside.
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 8 MANTELS Combustible and Non-combustible mantels may be installed at any height above the appli- ance opening. CLEARANCE TO COMBUSTIBLES Sides: 0 mm - 0 inches Floor: 0 mm - 0 inches Top: 0 mm - 0 inches ELECTRICAL SPECIFICATIONS Voltage: 120VAC,60Hz 240VAC,60Hz Total Amps: 12.
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 9 Figure 16 A B D E C (Notch) (Notch) A B D E C DO NOT USE THIS FIREPLACE IF ANY PART OF IT HAS BEEN UNDERWATER. IMMEDI- ATELY CALL A QUALIFIED SERVICE TECHNI- CIAN TO INSPECT THE FIREPLACE AND RE- PLACE ANY PART OF THE ELECTRICAL SYS- TEM WHICH HAS BEEN UNDER WATER.
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 10 REMOTE CONTROL OPERATION The Reflections Electric Fireplace is provided with an Infrared Remote Control. All func- tions of the fireplace are provided through the remote. The remote provided with the T.
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 11 MAINTENANCE OF MOTORS The motors used on the fan are pre-lubricated for extended bearing life and require no further lubrication. However, periodic cleaning/vacuuming of the fan/heater is recommended.
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 12 TROUBLESHOOTING DIAGRAM • No Power to T elevision. TROUBLESHOOTING: Miscellaneous Errors: Before beginning any troubleshooting, check that the following items are setup correctly . The unit should be plugged in and have power .
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 13 REPLACEMENT PARTS LSE-36R No. DESCRIPTION Part No. Qty. Electric Fireplace Assembly – – 1. Refractory, (3 Piece Set) 42M46 1 2. Glass 42M50 1 3. Screen, (with Pulls) 66M45 2 4. Log Set (Boxed) H1091 1 5.
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 14 Model Catalog Number Weight LSE-36R H0807 177 lbs. ACCESSORY PARTS AND COMPONENTS FOR THE LSE-36R The accessory parts and components shown on this page are to be used only with your LSE-36R electric fireplace.
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 15 NOTE: THIS PAGE INTENTIONALLY LEFT BLANK..
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 16 Printed in U.S.A. © 2003 by Lennox Hearth Products P/N 850,019M REV. B 04/2007 The manufacturer reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Lennox Hearth LSE-36R è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Lennox Hearth LSE-36R - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Lennox Hearth LSE-36R imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Lennox Hearth LSE-36R ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Lennox Hearth LSE-36R, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Lennox Hearth LSE-36R.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Lennox Hearth LSE-36R. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Lennox Hearth LSE-36R insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
