Manuale d’uso / di manutenzione del prodotto TWIN Driver del fabbricante Konica Minolta
Vai alla pagina of 50
User’ s Guide.
TWAIN Driver x-1 Introduction Thank you for purchasing this machine. This manual provides the information requ ired to use this machi ne for scan- ning. Be sure to read this manual be for e performing any operations. For precautions concerning the use and safety of the machine, refer to the User’s Guide provided with the machine.
TWAIN Driver x-2 Copyright © 2007 Konica Minolta Business Technologies, Inc. All Rights Reserved. Note - This User’s Guide may not be reproduce d in par t or in full without permis- sion. - Konica Minolta Business Technologies, Inc. will not be held lia ble for any incidents caused by using this U ser’s Guide.
TWAIN Driver x-3 Software End User License Agreement PLEASE READ CAREFULLY THE LI CENSE AGREEMENT BELOW BEFORE OPENING THE PACKAGE OF THIS SOFTWARE (“SOFTWARE”), DOWN- LOADING, INSTALLING OR USING THE SOFTWARE.
TWAIN Driver x-4 (i) use, copy, modify, merge or transfer copies of the Software except as pro- vided herein; (ii) reverse engine er, reve rse assemble, rev erse compi le or any other way an- alyze the Software; or (iii) sublicense, rent, lease or distribu te the Software or any copy th ereof.
TWAIN Driver x-5 6. GOVERN ING LAW This Agreement shall be governed by the laws of J apan. 7. SEVERABILITY In the event that any part or parts of this agreement shall be held illegal or null and void .
TWAIN Driver x-6 Contents Introduction Copyright ............. ............ .............. ........... .............. ........... ............. x-2 Software End User License Agreement ............ .............. .............. .. x-3 Contents ....... .
TWAIN Driver x-7 4 Driver settin gs 4.1 TWAIN scanner driver .. ........... ........... .............. ............ ........... .......... 4-1 Document Size .................. ............ .............. ........... .............. .......... 4-2 Scan Mode .
TWAIN Driver x-8 Explanation of manual conventions.
Setting up for scanning 1 TWAIN Driver 1-1 1 Setting up for scanning If the enclosed TWAIN driver is installed on the computer, this machine can be used to scan a document and send it to the computer. For scanning, an environment that incl udes the following software and hard- ware is required.
Setting up for scanning 1 TWAIN Driver 1-2.
Installing the TWAIN driver 2 TWAIN Driver 2-1 2 Installing the TWAIN driver This chapter provides descriptions on con necting the machine to a computer and installing the TWAIN driver.
Installing the TWAIN driver 2 TWAIN Driver 2-2 Connecting to the network In order to perform TWAIN scanning on a network, the optional network in- terface card NC-503 or image controlle r IC-206 must be installed. For details on connecting this machin e to the netw ork, refer to “Installing the TWAIN driver by using the installer” on page 2-12.
Installing the TWAIN driver 2 TWAIN Driver 2-3 2 Note When installing usin g Plug and Play, t he printer driver is also inst alled af- ter the TWAIN driver. For de tails on the printer driver, refer to the User’s Guide for the GDI printer driver or th e image controller IC-206.
Installing the TWAIN driver 2 TWAIN Driver 2-4 2.2 General operation fo r driver installation The driver is installed according to the following ge neral operati on. Installation using Plug and Play When installing the driver by using Plug and Play, the installation procedure differs depending on the operating system.
Installing the TWAIN driver 2 TWAIN Driver 2-5 2.3 Installing the TWAIN driv er by using Plug and Play Connecting to the computer’s USB port When this machine is connected to a computer with a USB cable, Plug and Play detects the device, and then installati on of the necessa ry drivers begins.
Installing the TWAIN driver 2 TWAIN Driver 2-6 2 Note With Windows XP, Server 2 003, Vista and 2000, log on as a user with Ad- ministrator privileges to install the driver.
Installing the TWAIN driver 2 TWAIN Driver 2-7 4 When the Completed Foun d New Hardware Wizard dialog box ap- pears, click the [Finish] button. This completes the installation of the TWAIN driver. The Found New Hardware Wizard appears again , and the installation of the printer driver begins.
Installing the TWAIN driver 2 TWAIN Driver 2-8 2 In the dialog box for ch ecking the disk, cl ick the [I don’t have the disk. Show me other options.] button. 3 Insert the printer driver CD into the CD-ROM/DVD drive of the compu- ter. 4 Click the [Browse my computer for driver software (advanced)] button.
Installing the TWAIN driver 2 TWAIN Driver 2-9 Installing using Plug an d Play on Windows 2000 2 Note If the driver is installed using Plug and Play, first the TWAIN driver is in- stalled, and then installation of th e printer driver begins.
Installing the TWAIN driver 2 TWAIN Driver 2-10 Installing using Plug and Play on Windows Me 2 Note If the driver is installed using Plug and Play, first the TWAIN driver is in- stalled, then the USB printing support dr iv er is installed, an d then instal- lation of the printer driver begins.
Installing the TWAIN driver 2 TWAIN Driver 2-11 – When you are asked whether to set this machine as the default, se- lect “Yes”. A dialog box appears, indicating th at the inst allation is f inished. 9 Click the [Finish] button. This completes the installation of the print er driver.
Installing the TWAIN driver 2 TWAIN Driver 2-12 2.4 Installing the TWAIN driv er by using the installer If the machine is to be used through a net work connection, insta ll the TWAIN driver by using the installer.
Installing the TWAIN driver 2 TWAIN Driver 2-13 5 From the drop-down list, select “Eng lish”, an d then click the [OK] but- ton. The installer st arts up. 6 From the drop-down list, select the appropriate TWAIN driver, and then click the [OK] button.
Installing the TWAIN driver 2 TWAIN Driver 2-14 8 Type in the IP address of the conne cted machine, an d then click the [OK] button. – Clicking the [Search] button aut o matically displays the IP ad dress of the connected machin e. – Select the IP a ddress of the mach ine, and then click the [OK] but- ton.
Installing the TWAIN driver 2 TWAIN Driver 2-15 2.5 Reinstalling the TWAIN dr iver by using the installer The following procedure describes how to reinstall the TWAIN driver by using the installer. 1 Insert the CD-ROM cont aining the TWAIN installer into the CD-ROM/ DVD drive of the compu ter.
Installing the TWAIN driver 2 TWAIN Driver 2-16 6 Click the “Upgrade Driver”, and then click the [Finish] button. A dialog box appears, indi cating t hat the reinstall ation is finished .
Installing the TWAIN driver 2 TWAIN Driver 2-17 2.6 Uninstalling the TWAIN driver The TWAIN driver can be uninstalled by deleting the driv er with System Prop- erties from Control Panel or by using the installer. 2 Note If the machine is to be used through a network, use the installer to unin- stall the TWAIN driver.
Installing the TWAIN driver 2 TWAIN Driver 2-18 Deleting the TWAIN driver by using the inst aller Use the installer to de lete the TWAIN driver. 1 Start Windows, and then insert the CD-R OM containing the TWAIN driver installer in to the computer’s CD-ROM/DVD drive.
Installing the TWAIN driver 2 TWAIN Driver 2-19 5 Click the “Remove Driver”, and th en click the [Fi nish] button. Once the driver is deleted, th e following dialog box appears.
Installing the TWAIN driver 2 TWAIN Driver 2-20.
Scanning a document 3 TWAIN Driver 3-1 3 Scanning a document The document can be scanned using e i ther the automatic document feeder or the original glass. 3.1 Using the automatic document feeder Use the automatic document feeder to continuously scan multiple docu- ments.
Scanning a document 3 TWAIN Driver 3-2 5 Specify the necessary settings. – Refer to “Driver settings” on page 4-1. – The “Duplex Scanning” is appears only if optional reverse automat- ic document feeder DF-605 is installed. 6 Load the document face up in the document feed tray of the automatic document fe eder.
Scanning a document 3 TWAIN Driver 3-3 3.2 Using the original glass Use the original gl ass when scannin g a book. 1 Start the application (imaging softwa re, Adobe Photoshop, etc.) on th e computer. – As an example, the p rocedure us ing Adobe Acrobat 6.
Scanning a document 3 TWAIN Driver 3-4 6 Place the document page face down on the original glass. – Align the document with the document scales at the top and at the left side of the original glass.
Driver settings 4 TWAIN Driver 4-1 4 Driver settings 4.1 TWAIN scanner driver No. Item Settings 1 Document Size A3L, B4L, A4 L, B5L, A5L, FL S 8 1/4 * 13 in, FLS 8 1/2 * 13 in, FLS 220 * 330 mm, FLS 8.
Driver settings 4 TWAIN Driver 4-2 Document Size From the drop-down list, select a docume nt size to specify the size of the document to be scanned. 2 Note If the scanned image is larger th an the specified docu ment size selected in the Document Size drop-down li st, any part of the scanned image larg- er than the specified size is erased.
Driver settings 4 TWAIN Driver 4-3 Scan Mode Two settings are available in the “S can Mode” drop-down list. - Text: Select this sett ing for normal documents. - Photo: Select this setting for photos. Resolution Three settings ar e available in the “Resolution” drop-down list.
Driver settings 4 TWAIN Driver 4-4 Scan Type From the “Scan Type” drop-down list, selec t either “Push Sca n” or “Pull Scan”. - Pull Scan: With this scanning method , clicking the [Scan] button in the driver starts scanning.
Driver settings 4 TWAIN Driver 4-5 Brightness The brightness of colors can be ad justed. The default setti ng is “0”. The brightness can be set between -4 (darker) and 4 (brighter). I/O Type The I/O Type dialog box appears. A USB connection or a network connection can be selected .
Driver settings 4 TWAIN Driver 4-6 Help Click this button to display the Help screen. About Click this button to display the software version information.
Error messages 5 TWAIN Driver 5-1 5 Error messages 5.1 Paper misfeeds Control panel message: Computer display message: Cause Remedy A paper misfeed occur red in the automatic document feeder or rever se automatic docu- ment feeder. Open the misfee d-clearing cover and the automatic do cument fe eder, and t hen re- move the misfed paper.
Error messages 5 TWAIN Driver 5-2 Clearing a misfeed in the automatic document feeder 1 Open the misfeed-clear ing cover. 2 Remove all do cument page s fr om the document feed tray.
Error messages 5 TWAIN Driver 5-3 3 Lift open the automatic document feeder. 4 While turning the knob on the automa tic document feeder in the direc- tion of the arrow, slowly pull out the document.
Error messages 5 TWAIN Driver 5-4 5 Close the automatic document fe eder and the misfeed-c learing cover. 6 Load the documents removed in step 2 back into the tray.
Error messages 5 TWAIN Driver 5-5 Transmission error Computer display message: 2 Note The network cable can be u sed only when the optional n etwork interface card NC-503 or image controller IC-206 is in stalled. Scanning Computer display message: Cause Remedy The machin e has not st arted up.
Error messages 5 TWAIN Driver 5-6 Scanning error Computer display message: 2 Note The network cable can be u sed only when the optional n etwork interface card NC-503 or image controller IC-206 is in stalled.
Error messages 5 TWAIN Driver 5-7 Other machine errors Computer display message: 2 Note The network cable can be u sed only when the optional n etwork interface card NC-503 or image controller IC-206 is in stalled.
Error messages 5 TWAIN Driver 5-8.
Copyright 2007 2007.12 A08E-9591-22 http://konicaminolta.com.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Konica Minolta TWIN Driver è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Konica Minolta TWIN Driver - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Konica Minolta TWIN Driver imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Konica Minolta TWIN Driver ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Konica Minolta TWIN Driver, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Konica Minolta TWIN Driver.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Konica Minolta TWIN Driver. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Konica Minolta TWIN Driver insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
