Manuale d’uso / di manutenzione del prodotto 790.4672 del fabbricante Kenmore
Vai alla pagina of 48
E ! Electric Range Slide-in models E ® Estufa el6ctrica Modelos deslizables Models, Modelos 790.4672# _= = Color number, nt_mero de color iii ........
Table of Contents Slide-in Range Warranty ................................................ 2 IMPORTANT SAFETY INSTRUCTIONS ....................... 3-5 Product Record .............................................................. 5 Range Features .....
Important Safety Instructions Read all instructions before using this appliance. Save these instructions for future reference. This manual contains many important safety messages.
Important Safety Instructions • When heating fat or grease, watch it closely. Fat or grease may catch fire if allowed to become too hot. • Use only dry potholders--Moist or damp potholders on hot surfaces may result in burns from steam. Do not let potholders touch hot heating elements.
Important Safety Instructions Do not cover the broiler insert with aluminum foil. Exposed fat and grease could ignite. Do not touch a hot light bulb with a damp cloth. Doing so could cause the bulb to break. Disconnect the appliance or turn off the power to the appliance before removing and replacing light bulb.
Range features Your Electric Range Features At a Glance Left Rear Element Control & Digital Display Left Front Element & Brid( Control & Digital Display Broil Electronic Oven Control with .
Surface Cooking Selecting Surface Cooking Cookware Cookware should have flat bottoms that make good contact with the entire surface heating element. Check for flatness by rotating a ruler across the bottom of the cookware (See Figure 1).
Setting Surface Controls About the Ceramic Glass Cooktop _ The ceramic cooktop has radiant surface elements located below the surface of the glass. The design of the ceramic cooktop outlines the area of the surface element underneath. Make sure the diameter of the pan matches the diameter of the element outline on the cooktop (See Figure 1).
Setting Surface Controls (cont'd) The Electronic Surface Element Control (ESEC) The Electronic Surface Element Control (ESEC) feature provides a digital display of the radiant surface elements on the cooktop. The ESEC display in combination with the touch pads is designed to replace conventional control knobs.
Setting Surface Controls (¢ont'd) Operating Single Radiant Surface Elements The cooktop has 4 SINGLE radiant surface elements: the RIGHT REAR position (Figure 1), the CENTER REAR position (Figure 2) and the LEFT FRONT and REAR positions (Figure 3).
Setting Surface Controls (¢ont'd) Operating the Dual Surface Element The cooktop is equipped with a Dual radiant surface element located at the right front cooktop position (Figure 1). Indicator lights on the control panel at that position are used to indicate what portions of the Dual radiant element will heat.
Setting Surface Controls (cont'd) Operating the Bridge Surface Element The cooktop is equipped with a "BRIDGE" surface element located at the left cooktop position (See Figure 1). Indicator lights on the control panel are used to indicate what portions of the Bridge element will heat.
Setting Surface Controls (cont'd) To Set the Cooktop Lockout Feature _COOKTOP The clock @ pad is used to activate the Cooktop Lockout feature which will lock all surface elements from being accidentally turned ON. This feature will only lock the cooktop.
Before Setting Oven Controls I _ This range has a fan that will turn "ON" and "OFF" by itself to keep the electronics cool. It may continue to run after the range has been turned "OFF", but may also stop immediately and then turn "ON" after a while.
Before Setting Oven Controls (cont'd) Types of Oven Racks Flat Handle Oven Rack Figure 2 Always use pot holders or oven mitts when adjusting the oven racks. Wait until the oven has completely cooled if possible. Oven racks may be HOT and may cause burns.
Control Pad Features READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various features and functions of the oven as described below. Detailed instructions for each feature and function follow later in this Use & Care Guide.
Setting Oven Controls Setting the Clock The _ pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation.
Setting Oven Controls (COB't) Setting Continuous Bake or 12 Hour Energy Saving The TIMER @ and FLEX CLEAN @ pads control the Continuous Bake or 12 Hour Energy Saving features.
Setting Oven Controls (con't) Consumer Defined Control Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These include the Oven Lockout, Temperature Display and Silent Control Operation features Setting Oven Lockout Feature The _oP_ pad controls the Oven Lockout feature.
Setting Oven Controls (con't) Consumer Defined Control Features Setting Temperature Display -- Fahrenheit or Celsius: .............. @ The BROIL and FLEX CLEAN pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius.
Setting Oven Controls (con't) Setting Preheat The PREHEAT _ pad controls the Preheat feature. The Preheat feature will bring the oven up to temperature and then indicate when to place the food in the oven. Use this feature when recipes call for preheating.
Setting Oven Controls (con't) Setting Bake ............ @ The BAKE Bake" pad controls normal baking• If preheating is necessary, refer to the Preheat Feature for instructions• The oven can be programmed to bake at any temperature from 170 ° F to 550 ° F (the sample shown below is for 375°F).
Setting Oven Controls (cont'd) Oven Baking For best cooking results, pre-heat the oven before baking cookies, breads, cakes, pies or pastries, etc. The cooking times and temperatures needed to bake a product may vary slightly from your previously owned appliance.
Setting Oven Controls (con't) Setting Convection Bake The CONVECTION BAKE pad controls the Convection Bake feature. Bake Use the Convection Bake feature when faster cooking is desired. The oven can be programmed for Convection baking at any temperature between 170°F (77°C) to 550°F (288°C).
Setting Oven Controls (ton't) Setting Convection Roast This method of cooking enables you to obtain the best results when roasting. The oven can be programmed to convection roast at any temperature from 170°F to 550°F (77°C to 288°C). Preheating the oven is not necessary when cooking meats with Convection Roast.
Setting Oven Controls (con't) Setting the Slow Cook Feature The _ SLOW COOK pad is used to activate this feature. The Slow Cook feature may be used to cook foods more slowly, at lower oven temperatures and provides cooking results much the same way as a Slow Cooker or Crock-Pot.
Setting Oven Controls (con't) Setting Timed Bake, Timed Convection Bake or Timed Convection Roast Tim_d Ow_ The BAKE ............. .... or CONVECTION BAKE ................ or CONVECT ON ROAST and OVEN COOK TIME @ pads control the Timed Bake feature.
Setting Oven Controls (con't) Setting Delayed Timed Bake or Delayed Timed Convection Bake Timed Oven The BAKE B_ke .................. or CONVECTION BAKE OVEN COOK TIME @ and DELAY START @ pads control the Delayed Time Bake feature. The automatic timer of the Delayed Time Bake will turn the oven on and off at the times you select in advance.
Setting Oven Controls (cont'd) Setting the Food Categories Feature: The CAKES Q and BREADS _ pads in the Food Categories feature are used when cooking certain food items• These pads have been d.
Setting Oven Controls (cont'd) Setting the Warm & Hold TM Feature The Warm & Hold _ pad turns ON the Warm & Hold feature and will maintain an oven temperature of 170°F (77°C). The Warm & Hold feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished.
Setting Oven Controls (con't) Setting Broil The Broil pad controls the Broil feature. When broiling, heat radiates downward from the oven broiler for even coverage. The Broil feature temperature may be set between 400°F and 550°F. This appliance includes a Searing Grill for searing meats (Figure 6).
Setting Oven Controls (con't) To Set the Sabbath Feature (for use on the Jewish Sabbath & Holidays) Timed Oven The @ COOK TIME and @ DELAY START pads are used to set the Sabbath feature. The Sabbath feature may only be used with the Bake pad.
Setting Oven Controls (con't) To Set the Sabbath Feature (for use on the Jewish Sabbath & Holidays) (continued) Should you experience a power failure or interruption, the oven will shut off. When power is returned the oven will not turn back on automatically.
Setting Oven Controls (con't) Using the Temperature Probe Feature For many foods, especially roasts and poultry, testing the internal temperature is the best method to insure properly cooked food. The Temperature Probe gets the exact temperature you desire without having to guess.
Setting Warmer Drawer Controls Arranging Warmer (Warm & Ready TM) Drawer Rack Positions The rack can be used in 2 ways: • In the upright position to allow low profile food items to be placed both under and on top of the rack (for example, rolls or biscuits on top of the rack and a casserole dish underneath).
Setting Warmer Drawer Controls (cont'd) Preparing Bread Dough for the Warmer Drawer The Warmer Drawer has a "Proof Bread" feature that can be used to help prepare bread dough. The recommended length of time to keep bread dough in the Warmer Drawer is about 45-60 minutes.
Self-Cleaning During the Self- Cleaning cycle, the outside of the range can become very hot to the touch. DO NOT leave small children unattended near the appliance. The health of some birds is extremely sensitive to the fumes given off during the Self- Cleaning cycle of any range.
Self-Cleaning (cont'd) What to Expect during Cleaning While the oven is in operation, the oven heats to temperatures much higher than those used in normal cooking. Sounds of metal expansion and contraction are normal. Odor is also normal as the food soil is being removed.
Self-Cleaning (cont'd) To Start the delayed Self-Clean Cycle The FLEX CLEAN _ and DELAY START _ pads control the Delayed Self-Clean operation. The automatic timer will turn the oven on and off at the time you select in advance. Be sure to review TO START THE SELF-CLEAN CYCLE for recommended clean times.
Self-Cleaning (cont'd) INSTRUCTIONS PRESS Stopping or Interrupting a Self-Cleaning Cycle If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven: 1.
General Care & Cleaning Cleaning Various Parts of Your Range Before cleaning any part of the range, be sure all controls are turned OFF and the range is cool. Remove spillovers and heavy soiling as soon as possible. Regular cleanings now will reduce the extent and difficulty of major cleaning later.
General Care & Cleaning (cont'd) Ceramic Glass Cooktop Cleaning & Maintenance Consistent and pro per c!eani ng is essential to mai ntai n ing you r Ceramic g lass cookto p Prior to using your cooktop for the first time, apply the recommended CookTop@ Cleaning Creme to the ceramic surface (on the web visit www.
General Care & Cleaning (cont'd) Do not use the following on the ceramic glass cooktop: • Do not use abrasive cleaners and scouring pads, such as metal and some nylon pads.
General Care & Cleaning (cont'd) Removing and Replacing Warmer (Warm & Ready TM) Drawer _I_ I _ Electrical Shock Hazard can occur and result in serious injury or death. Turn the power off at the main source before cleaning and servicing the warmer drawer.
Before you call Solutions to Common Problems Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. OCCURRENCE POSSIBLE CAUSE/SOLUTION Range is not level.
Metalmarks. Sliding or scraping ofmetal utensils oncooktop surface. Do not slide metal utensils on cooktop surface. Use a ceramic-glass cooktop cleaning cream to remove the marks. See "Ceramic Glass Cooktop Cleaning & Maintenance" section under General Care & Cleaning.
Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmore®product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time.
Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold itt For the replacement parts, accessories and owner's manuals that you need to do-it-yourself.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Kenmore 790.4672 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Kenmore 790.4672 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Kenmore 790.4672 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Kenmore 790.4672 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Kenmore 790.4672, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Kenmore 790.4672.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Kenmore 790.4672. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Kenmore 790.4672 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
