Manuale d’uso / di manutenzione del prodotto RK-C42WBT3 del fabbricante JVC
Vai alla pagina of 16
RK-C42WBT3 Thank you for purchasing this Wall Mounting Unit. We recommend that you read this manual thoroughly before use in order to familiarize yourself with this unit. Please store this manual in a safe place after reading it. • Mounting a plasma display television requires specific technical knowledge.
2 Assembly and Mounting Warnings ● Consult authorized service personnel for the installation and attachment of this unit to the wall. This unit weighs approx. 60 kg (approx. 132 lbs.), including display monitor. Improper assembly or installation may cause the unit to fall when it is mounted, which may result in fatal accidents.
3 W arning Mounting the Wall Unit The Wall Mounting Unit should be mounted to a wall that can adequately hold the total weight of the plasma display and the Wall Mounting Unit over a long period of time and which can adequately withstand earthquakes, conceivable vibrations, and other external forces.
4 Frame Fastening Screws left/right (Spacer Ring + Flat Washer + Spring Washer) Frame Rotation Shaft Screws (left/right) Spacer Rings (left/right) Frame Attachment Lever Screws Angle Adjustment Lever Frame Rotation Jaw Plasma Display w q e X 10 r Angle Adjustment Lever Lock Screw Caution ● Consult authorized service personnel for electrical work.
5 <Before Attaching Plasma Display> 2. Push in the heads of the left and right Frame Removal Lever Screws a and lift up section b to remove the Frame q from the Wall Mounting Unit w . The Wall Mounting Unit is sold with Frame q and Wall Mounting Unit w fixed together.
6 Instructions for Assembly 1. Attach the Wall Mounting Unit w to the surface of the wall. The unit should be attached using the method most suited to the wall structure.
7 3. Identify the Rotation Shaft Screws of the Wall Mounting Unit. Check that the left and right Rotation Shaft Screws are secure, as the Rotation Jaw of the Frame (attached to the plasma display) will be inserted into the Rotation Shaft Screw Component of the Wall Mounting Unit w .
8 5. Fix the Frame and Wall Mounting Unit. Combine the Frame Fastening Screws, Spacer Rings, Flat Washers, and Spring Washers (from the two pairs of Frame Fastening Screw Components that were put aside when detaching the Frame q from the Wall Mounting Unit w ) as shown below and fasten them securely using a screwdriver.
9 <Instructions for Assembly, cont’d> Adjusting the Angle of the Plasma Display ＊ The angle of the Wall Mounting Unit can be adjusted to 0 ° , 5 ° , 10 ° , 15 ° , and 20 ° .
10 2. Place one hand on top of the plasma display to steady it and with the other hand set the Angle Adjustment Lever to 20 ° . ＊ If the Angle Adjustment Lever has already been fastened, perform this task after removing the Angle Adjustment Lever Lock Screw.
11 <Instructions for Assembly, cont’d> 3. Remove the Rotation Shaft Screws and Spacer Rings at the bottom left and right of the Wall Mounting Unit. ＊ The Rotation Shaft Screws and the Spacer Rings will be used after the cables have been connected.
12 Brace the plasma display while connecting the power cord or system cables, as the display may tip over, causing injury. 5. Connect the power cable and system cables to the plasma display. ＊ Be careful not to let the cables become caught between the plasma display and the Wall Mounting Unit.
13 7. Set the angle of the plasma display. Hold the upper part of the plasma display with one hand and set the display to the desired angle with the other hand, using the Angle Adjustment Lever on the Wall Mounting Unit. 8. Fasten the Angle Adjustment Lever.
14 1. Hold the upper middle of the plasma display and set the Angle Adjustment Lever to 0 ° . ＊ If the Angle Adjustment Lever has been fastened, remove the Angle Adjustment Lever Lock Screw before performing this task. This task must be performed by at least two persons.
15 <Instructions for Removing the Plasma Display, cont’d.> This task must be performed by at least two persons. Danger 3. Remove the Frame Fastening Screws, Spacer Rings, Flat Washers, and Spring Washers of the two Frame Fastening Screw Components at the upper left and right of the Wall Mounting Unit.
Wall Mounting Unit Exterior 13 1 20 13 13 13 1 20 13 1 20 13 13 13 1 20 2-φ5 2-φ8 2-φ5 2-φ8 2-φ5 2-φ8 2-φ5 2-φ8 2-φ5 2-φ5 2-φ8 20 89 49 20° 300 20 20 8.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC RK-C42WBT3 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC RK-C42WBT3 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC RK-C42WBT3 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC RK-C42WBT3 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC RK-C42WBT3, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC RK-C42WBT3.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC RK-C42WBT3. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC RK-C42WBT3 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
