Manuale d’uso / di manutenzione del prodotto LVT1627-001A del fabbricante JVC
Vai alla pagina of 252
KD-NX5000 HDD NAVIGATION/DVD RECEIVER NAVEGACIÓN HDD/RECEPTOR DVD SYSTÈME DE NAVIGATION À DISQUE DUR/RÉCEPTEUR DVD For installation and connections, refer to the separate manual. Para la instalación y las conexiones, refiérase al manual separado.
2 ENGLISH Warning: If you need to operate the unit while driving, be sure to look ahead carefully or you may be involved in a traffic accident. Every time you turn on the unit, the screen below appears. Take enough care when operating the unit and make sure safe driving.
3 When the temperature is low, the HDD may take some time to start up, or may reboot automatically. It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs withou.
4 ENGLISH How to detach/attach the control panel Detaching Attaching How to forcibly eject a disc If a disc cannot be recognized by the unit or cannot be ejected, eject the disc as follows. Emergency Eject and No Eject (or Eject OK ) appear on the monitor.
5 [European Union only] INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
6 ENGLISH ENGLISH 8 I ntr oduc tion Initial settings Basic operations Pa r ts index Remote contr oller—RM-RK250 18 N a vigation sy st em Basic operations Registering y our home Star ting guidance Se.
7 51 R adio Listening to the radio Listening to the satellit e radio 59 D iscs and HDD Disc operations Music ser ver operations CD changer operations 79 O ther func tions iP od/D . pla yer operations Playing other external components Using Bluetooth devic es AV Menu items S ound equalization 109 Tr oubleshooting 117 Specifications KDNX5000_J.
8 ENGLISH Initial settings When you turn on the unit for the first time, the initial setup screen appears. Follow the procedure below and make necessary settings. 5 DST Select Auto if your residential area is subject to DST (Daylight Saving Time). 6 Reverse Polarization Engage the parking brake, step on the brake pedal, then switch the gear lever.
9 Sensor Status Learning Lv. :0 GPS Antenna :OK [5] Speed Signal :12.0 Parking Brake :On Direction :Forward Calibrating... Calibration Before using the Navigation System first time, it is required to calibrate the Navigation System.
10 ENGLISH Reset the unit. • Use only when the internal system malfunctions. Basic operations To turn on the power To turn off the power [Hold] To drop the volume in a moment (ATT) ATT indicator flashes. To restore the sound, press the same button again.
11 Basic operations To change the display of AV screens Vehicle information AV screen 2 * The number and contents of AV screens depend on the source. ** Appears only when you have selected Video or Camera for Video Input setting ( ☞ [93] ).
12 ENGLISH Menu operations Map screen AV screen To call up a menu AV Menu ☞ [90] Destination Menu ☞ [42] Information Menu ☞ [42] Setup Menu ☞ [43] Destination 1/2 Home Return Address Vicinity .
13 Basic operations 1 Call up AV Menu . 2 Select EQ in AV Menu . 3 Change the setting as you like. Now the setting is changed. Press DISP to exit from the menu, or BACK to go back to the previous menu. Display 1/2 Language Demonstration Wall Paper Scroll Tag Display [Off] Current menu title Current setting of the selected item.
14 ENGLISH 12 8 46 3 9 pq w e 7 5 Parts index On the map screen On the AV screens On menu screens 1 /ATT • Turn on the unit. • Turn off the unit if pressed and held. • Attenuate/restore the sound. 2 AV/SRC Switch to the AV screen. • Change the source.
15 Installing the batteries Before using the remote controller: • Aim the remote controller directly at the remote sensor on the unit. The unit is equipped with the steering wheel remote control function. • See the Installation/Connection Manual (separate volume) for connection.
16 ENGLISH Operations from the remote controller On the map screen On the AV screens On menu screens 1 AV/OFF Switch to the AV screen. • Change the source. In Navigation Menus: Switch to the AV screen. In AV Menu: Change the source and switch to the AV screen.
17 Only on the AV screens t • Make selections in disc menus. • DISC +/– buttons: Change discs for a CD changer. y ENT Disc: Confirm the selection. u TOP M DVD/DivX 6: Show the disc menu. ☞ [67] VCD with PBC: Resume PBC playback. ☞ [67] i DVD MENU o OSD Display the on-screen bar.
18 ENGLISH Navigation System 20 Sa fe ty instruc tions for Naviga tion S y stem 22 Basic operations 24 Registering y our home To register y our home 24 To go home 24 26 Star ting guidance Setting a de.
19 19 36 Arranging y our rout e Setting places to stop b y 36 Sa ving and loading rout es 37 Av oiding a congestion ahead 37 38 Registering fav orit e points Marking your fa vorit e points 38 Editing .
20 ENGLISH Safety instructions for Navigation System SAFETY INSTRUCTIONS Use of the Navigation System is only permitted if the traffic conditions are suitable and you are absolutely sure that no risk, obstruction or inconvenience will be incurred to you, your passengers or other road users.
21 When replacing/rotating the tires: It is required to clear all the accumulated learning data which is important for accurate navigation. To clear the data, perform Reset Calibration on page 46. On map updating If “Your map data is more than one year old and updates may be available.
22 ENGLISH Basic operations Adjust the volume. Switch to the AV screen. Call up Shortcut Menu. Current position mode —The map scrolls automatically so that your position is always at the center of the map. Operate the current AV source. ( ☞ [50] ) Change the map view.
23 Basic operations To change the map view The map view changes as follows: Heading Up = 3D Map = North Up You can also change the map view through Setup Menu ] Map Options ] Map View ( ☞ [45] ). North Up The map view is oriented with north “upwards,” like usual paper maps.
24 ENGLISH To register your home Register your home or your office, wherever you go often, as Home, so that you can easily set that place as destination. • You can register homes only after calibration is finished. ( ☞ [9] ) 1 If you are at home now, check that your home is displayed at the center of the map.
25 Registering your home What is Shortcut Menu? On the map screen, you can call up Shortcut Menu by pressing ENT. Shortcut Menu is a gateway to various operations. While guided While not guided To select an icon, press ENT or one of the four keys on the right circle button corresponding to the icon.
26 ENGLISH Scroll the map to display the destination at the center of the map. Call up Shortcut Menu. Select [Go Here] to start guidance. The System starts calculating the route to the selected destination, and guidance starts.
27 Call up Destination Menu. Select one of the methods to search for your destination. * During guidance, Cancel Guide appears. ** During guidance, Avoid Section appears. • You cannot select the items when they are gray. The information on the search result appears.
28 ENGLISH 1 Enter characters. • Available characters are automatically narrowed down as the System searches its database for matches. 2 Display the list of matches. • This button is available when the matches are narrowed down to 100 or less. • You can also display the list of matches by pressing and holding ENT.
29 3 Select a category ( then a sub category if any) of the POI. The result is listed in the order of distance from the place where you are. 4 Select a POI from the list. Searching for a place POI near a place/route ( Vicinity ) You can search for a POI around the place where you are now.
30 ENGLISH From the list of POI ( POI ) The System has a huge database of POI (Point Of Interest), such as restaurants, gas stations, hospitals, etc. 1 Call up Destination Menu. 2 Destination ] POI 3 Input the state name. • Input the city name if a state is already selected.
31 By coordinates ( Coordinate ) 1 Call up Destination Menu. 2 Destination ] Coordinates 3 Input the latitude and the longitude. 4 Select Detail when finished. By telephone number ( Telephone ) 1 Call up Destination Menu. 2 Destination ] Telephone 3 Select a state.
32 ENGLISH How you are guided To cancel guidance 1 Call up Shortcut Menu. 2 Select [Cancel Guidance] . Destination found Route calculation Screen while guided To cancel calculation, press BACK.
33 How you are guided To repeat the last voice guidance [Hold] 2 1 3 Guidance at turns When you approach a turn, the System guides you with voice guidance and indications on the screen. • Guidance voice comes out only through the front speakers (and the front line out on the rear).
34 ENGLISH Getting information on your route and places To see the itinerary and the turns list Trip information Trip Distance Driven 8.1mi Time Driven 0:12 Average speed 40mph • You can also view the trip through Information Menu ] Trip . • You can also view the turns list through Information Menu ] Turns List .
35 To check the estimated arrival time and distance to the next via point Each time you press and hold the button, the information on the upper left corner alternates between that of the next via point and of the final destination. [Hold] To see how your trip will go Information Menu ] Simulation appears on the display.
36 ENGLISH You can also set via points on the map through Shortcut Menu ] [Add to Via Point] . 3 Select the via point you want to move. 4 Move the selected via point in the list. 5 Repeat steps 3 and 4 to move other via points. 6 Finish the rearrangement.
37 Saving and loading routes You can save up to 50 combinations of destination and via points. You can easily call up your usual route without the trouble of setting destinations. • Each route can contain up to nine via points. To save a route 1 Select your destination (and via points if necessary), and start guidance.
38 ENGLISH Registering favorite points Just like you mark your friend’s house or a nice Chinese restaurant on your map book, you can register your favorite points in the system. Marking your favorite points • You can register 300 favorite points. • You can register favorite points only when the map scale is 1.
39 Registering favorite points 4 Select the item you want to edit. Name The name of the favorite point. Group See the table on the right for the available ten groups. Categorize the favorite points so that you can find them easily. Address The address of the favorite point.
40 ENGLISH Traffic information on map To see detailed information Select an item on the list and press ¢ . What is TMC? Traffic Message Channel (TMC) is a technology for delivering real-time traffic information to drivers. The traffic information sent by an FM radio station are received and analyzed by the System.
41 How traffic information is reflected in navigation If Bypass Traffic is set to Manual Reroute ( ☞ [44] ), [Reroute] appears on the screen when the traffic service informs the System of traffic accidents or congestion ahead on your route.
42 ENGLISH Navigation menu items ☞ [12] for the detailed Menu operations. Destination Menu Menu items Home Start guidance to a home. (Appears only while not guided.) ☞ [24] Cancel Guide Cancels the guidance. (Appears only while guided.) ☞ [24, 26, 32] Return Starts guidance to the place where you have started your last guidance.
43 Setup Menu Menu items Selectable settings (Initial setting) Guidance Voice Gender Female, Male Volume Adjust the volume of the voice guidance. Off , 01 to 50 ( 25 ) • Press ENT to listen to a sample voice at the selected volume. Output Channel Select the guidance output channel.
44 ENGLISH Menu items Selectable settings (Initial setting) Guidance Options Interruption Select the voice guidance output on an AV screen. • A small icon of the next turn is always displayed at the lower- right corner of the AV screen while guided, regardless of this setting.
45 Menu items Selectable settings (Initial setting) Map Options Map View North Up , Heading Up , 3D Map ☞ [23] Auto Zoom Select how the zoom scale changes. Off : (Effective only while guided) Zoom into 100 ft (30 m) scale at turns if Guidance View is set to Auto Magnification .
46 ENGLISH Menu items Selectable settings (Initial setting) System Setting Installation Angle Select the angle of the unit measured by the supplied gauge. (See also the Installation/Connection Manual.) 1 : –5.0° to 1.0° 2 : 1.0° to 6.0° 3 : 6.0° to 14.
47 Additional information Initial settings • If you select On for Store Display Mode , the system starts up in demonstration mode for shops, and the initial setup screen appears every time you turn on the unit after turning off and on the ignition switch.
48 ENGLISH – when tire slip occurs continuously and frequently – after running on areas other than a road (e.g. private lands or parking lots) – after running in underground or tower type parkin.
49 List of POI icons Gas Station Hotel Parking Restaurant Shopping Travel Agency/Info Air Transportation Airport City Finder Ground Transportation Others [Travel] Recreation Bowling Golf Outdoor Skiin.
ENGLISH 50 List of traffic icons Traffic Jam Road works Road is blocked or closed Traffic lane closed Accident Condition Other Caution Event Information AV source operations in the map screen Source Tuner Auto search. Change preset stations. Satellite radio Change channels.
51 Radio 52 Listening to the r adio FM station automa tic presetting —SSM (Strong-sta tion Sequential Memor y) 52 Manual presetting 53 Selec ting pr eset stations 53 Assigning titles to stations 54 .
ENGLISH 52 This function works only for FM bands. You can preset six stations for each band. 1 2 Select “TUNER.” Select the bands. Search for a station—Auto Search. • Manual Search: Press and hold either 4 or ¢ until Manual Search appears on the monitor, then press it repeatedly.
53 FM1 Preset4 Station name 92.5 MHz 10:35 AM 80 km/h FM1 Preset4 Station name 92.5 MHz 10:35 AM 80 km/h Listening to the radio Selecting preset stations 1 2 Select a preset number. On the remote: 1 2 Select a preset number. or From the Preset List 1 Display the Preset List.
ENGLISH 54 Tuning in to stations with sufficient signal strength This function works only for FM bands. Once you have activated this function (selected Local ), it always works when searching for FM stations. 1 2 AV Menu ] Mode ] DX/Local ] Local 3 lights up.
55 Listening to the satellite radio Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit. • JVC SIRIUS radio DLP —Down Link Processor, for listening to the SIRIUS Satellite radio.
ENGLISH 56 For SIRIUS Radio Select “SAT.” Select a category. • To select a channel from all categories, select “ALL.” Select a channel to listen to. • Holding either 4 or ¢ changes the channels rapidly. • While searching, invalid and unsubscribed channels are skipped.
57 Listening to the satellite radio Selecting channels by channel number On the remote only: 1 2 Input the channel number in three digits. Presetting channels You can preset six channels for each band. 1 Tune in to a channel you want to preset. 2 Display the Preset List.
ENGLISH 58 Selecting channels on the lists You can select a channel using one of the following lists—Preset list/Category list/ Channel list. 1 2 AV Menu ] List ] Preset List/ Category List/ Channel List • Preset List : ☞ left column • Category List : Displays the categories.
59 59 Discs and HDD 60 Disc operations Play able discs/files 61 Selec ting playback modes 64 Selec ting tracks on the list 65 Pr ohibiting disc ejection 65 Remote opera tions 65 Special functions for .
ENGLISH 60 If “ ” appears on the monitor, the unit cannot accept the operation you have tried to do. • In some cases, without showing “ ,” operations will not be accepted.
61 Disc operations Playable discs/files Disc type Recording format, file type, etc. Playable DVD DVD Video DVD Audio DVD-ROM DVD Recordable/Rewritable (DVD-R *1 /-RW, +R/+RW *2 ) • Compliant to UDF bridge format • DVD-RAM cannot be played.
ENGLISH 62 File type DivX, MPEG MP3, WMA, WAV CD 4 , ¢ Press: Select track Hold: Reverse/ forward search *1 4 , ¢ Press: Select file Hold: Reverse/ forward search *1 ∞ , 5 Press: Select folder Hol.
63 01 01 0:00:03 G 01 0:00:03 Disc operations DVD Audio VCD DVD Video 4 , ¢ Press: Select chapter Hold: Reverse/ forward search *1 ∞ , 5 Press: Select title 4 , ¢ Press: Select track Hold: Reverse/ forward search *1 ∞ , 5 Press: Select group 4 , ¢ Press: Select track Hold: Reverse/ forward search *1 01 01 0:00:03 T C Audio format Title no.
ENGLISH 64 Selecting playback modes You can use only one of the following playback modes— Intro / Repeat / Random . Ex. To select Track Repeat 1 2 AV Menu ] Mode ] Repeat ] Track 3 When one of the playback modes is selected, the corresponding indicator lights up on the disc information screen.
65 Disc operations Selecting tracks on the list If a disc includes folders, you can display the Folder/Track Lists, then start playback. 1 Display the Folder List. [Hold] 2 Select a folder, then a track. • If you press ENT while a folder is selected, all tracks in the selected folder are played back.
ENGLISH 66 Selecting an item with number keys You can select a chapter/title/group/folder/ track by inputting its number. Ex.: To select a title of a DVD Video. 1 [twice] On the playback screen: TITLE – – appears on the screen. On the disc information screen: The title number lights up in gray.
67 Disc operations Menu driven operations (For DVD and DivX 6) 1 or (only for DVD Video and DivX) 2 Select an item you want to play. 3 Quick skip Return/advance the scenes by 5 minutes. While playing... current playback position PBC playback Select an item on the menu.
ENGLISH 68 [twice] Operations using the on-screen bar For DVD/VCD/DivX/MPEG/JPEG discs, you can check the disc information and use some functions through the on-screen bar. 1 Display the on-screen bar. • When you press OSD once, the information bar appears.
69 Disc operations DV D -V T 02 -C 03 TOTAL 1:25:58 TIME TITLE CHAP RPT C. RPT Information Operation 1 Disc type 2 Audio signal format (for DVD) PBC (for VCD) 3 Playback mode T. RPT Title Repeat/Track Repeat * C. RPT Chapter Repeat * F. RPT Folder Repeat * D.
ENGLISH 70 Music server operations The built-in HDD works not only as storage for navigation data, but as a music server, where you can record CD tracks and music files (MP3, WMA and WAV files). The recorded tracks are categorized into genres and albums.
71 Selecting playback modes You can use only one of the following playback modes— Intro / Repeat / Random . Ex. To select Track Repeat 1 2 AV Menu ] Mode ] Repeat ] Track 3 When one of the playback modes is selected, the corresponding indicator lights up on the monitor.
ENGLISH 72 Recording/copying tracks from a disc • You can record tracks of audio CDs into the HDD. Record appears in AV Menu . • You can copy music files (MP3, WMA, WAV) into the HDD. Copy appears in AV Menu . Preparation: Insert the disc to record/copy, and select DISC as the source.
73 To record selected tracks 1 2 AV Menu ] Record ] Select Track 3 Select the tracks to record. • Checkbox operations ☞ [105] 4 5 Select the genre and album to record the tracks into. • Repeat the same procedure to select the album. 6 Select a compression mode.
ENGLISH 74 To copy selected tracks 1 2 AV Menu ] Copy ] Select Track 3 Select the tracks to copy. • Checkbox operations ☞ [105] 4 5 Select the genre to copy the tracks into. 6 Select the album to copy the tracks into. Copying... appears, and copying starts.
75 Editing the library • Library editing is possible only when HDD is selected as the source. Changing the titles You can change the names of genres, albums and tracks in the HDD. Ex. To change the name of a track 1 2 AV Menu ] Title Entry 3 Select a genre, then an album.
ENGLISH 76 Checking the remaining storage size 1 2 AV Menu ] Edit ] HDD Free Area Free space of the music server Deleting tracks, albums, or genres Ex. To delete tracks • Select the album which the target tracks belong to. 1 2 AV Menu ] Edit ] Delete ] Track 3 Check the tracks to delete.
77 CD changer operations Select “CD-CH.” Playback starts automatically. Display the Disc List. • Each time you hold the button, you can display the other list of the remaining discs. Select a disc to start playing. It is recommended to use a JVC MP3-compatible CD changer with your unit.
ENGLISH 78 Selecting playback modes You can use only one of the following playback modes—Intro/Repeat/Random. Ex. To select Track Repeat 1 2 AV Menu ] Mode ] Repeat ] Track 3 When one of the playback modes is selected, the corresponding indicator lights up on the monitor.
79 79 Other functions 80 iP od/D . play er oper ations Selec ting a track fr om the play er’ s menu 80 Selec ting playback modes 80 81 Playing other e x ternal componen ts External input 81 V ideo i.
ENGLISH 80 Selecting playback modes 1 2 AV Menu ] Mode ] Repeat or Random Repeat One : Functions the same as “Repeat One” or “Repeat Mode = One.” All : Functions the same as “Repeat All” or “Repeat Mode = All.” Random Song /On : Functions the same as “Shuffle Songs” or “Random Play = On.
81 4 Assign a title. • Inputting characters ☞ [105] • You can use up to 16 characters. 5 Select Store . • While driving at a speed greater than 6 mi/h (10 km/h), operations of inputting are prohibited.
ENGLISH 82 Video input You can connect an external component to the VIDEO IN plug. Preparation: When connecting a video component Make sure Ext Input is selected for the external input setting, and Video for the video input setting. ( ☞ [93] ) • You cannot view the video picture when the parking brake is not engaged.
83 Using Bluetooth® devices— Cellular phone/audio player Using Bluetooth devices For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200) to the CD changer jack on the rear. • Refer also to the instructions supplied with the Bluetooth Adapter and the Bluetooth device.
ENGLISH 84 Registering using Open 1 Mode ] Open 2 Enter a PIN (Personal Identification Number) * code to the unit. • Inputting characters ☞ [105] • You can enter any number you like (1- digit to 16-digit number). * Some devices have their own PIN code.
85 Bluetooth Phone *2 P902i Calling... Jack 09845671234 10:35 AM Using Bluetooth devices Connecting/disconnecting a registered device 1 On the Bluetooth Phone screen or the Bluetooth Audio screen, select a registered device you want to connect/disconnect.
ENGLISH 86 On the unit: 1 Call up the preset list. 2 Select the preset number to call. You can also access the preset number list through Phone Menu ] List .
87 Select “Bluetooth Audio.” Start playback. Using the Bluetooth audio player *1 Audio player Cellular phone with audio function *2 Each time you press 5 ∞ , the registered device names (and New Device when a new device can be registered) appear in turn.
ENGLISH 88 Phone Menu Menu items Selectable settings (Initial setting) Dial *1 Redial Select a phone number from the list of the phone numbers you have dialed. Received Calls Select a phone number from the list of the received calls. Phonebook Select a name, then phone number from the phone book of the connected cellular phone.
89 Using Bluetooth devices Menu items Selectable settings (Initial setting) Connect *3 Only for the registered devices. After selecting a device from among the registered devices ( ☞ [85, 87] ), establish the connection with it. ☞ [85] Disconnect *3 Only for the device being connected.
ENGLISH 90 AV Menu items Menu items Selectable settings (Initial setting) Setup ] Display Language *1 English US, Español, Français Demonstration Off : Cancels. On : Activates the demonstration on the monitor. Wall Paper You can select the background picture of the monitor.
91 Menu items Selectable settings (Initial setting) Setup ] Clock Time Format 12Hours , 24Hours Time Zone Alaska, Pacific, Mountain, Central, Eastern, Atlantic, Newfoundland DST (Daylight Saving Time) Activate this if your residential area is subject to DST.
ENGLISH 92 Menu items Selectable settings (Initial setting) Setup ] Disc *3 D. Audio Output Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal on the rear. For details, ☞ [106] . Off : No signal is output from the terminal.
93 Menu items Selectable settings (Initial setting) Setup ] Tuner IF Band Width Auto : Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) Wide : Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will remain.
ENGLISH 94 Menu items Selectable settings (Initial setting) Setup ] Input For Camera Interlock Off : Cancels. Reverse : Automatically switch to the camera view when the gear is shifted into reverse. *8 Low Speed : Automatically switch to the camera view when your car slows down.
95 Menu items Selectable settings (Initial setting) EQ Flat, Hard Rock, R&B, Pop, Jazz, Dance Music, Country, Reggae, Classic, User 1, User 2, User 3 ☞ [98] Sound Fader/Balance Adjust fader—speaker output balance between the front and rear speakers.
ENGLISH 96 Menu items Selectable settings (Initial setting) Screen Control/ Picture [Disc]/ Picture [Video] You can adjust the monitor to make it clear and legible. • While picture from VIDEO IN is displayed, you can adjust the playback picture of VIDEO IN ( Picture [Video] ).
97 Menu items Selectable settings (Initial setting) Mode *15 Mono Only for FM. ( Off , On ) ☞ [54] DX / Local Only for FM. ( DX , Local ) ☞ [54] SSM Only for FM. ☞ [52] Intro/Repeat/Random Only for disc playback, music server, CD changer and iPod/D.
ENGLISH 98 Storing your own adjustment You can store your adjustment into User 1 , User 2 , and User 3 . 1 Repeat steps 1 and 2 above, then in step 3 ... 2 Adjust. 3 Store the setting into User 1 , User 2 or User 3 . Selecting an equalizer type 1 2 AV Menu ] EQ 3 Select an equalizer type.
99 Sound equalization / Additional information Additional Information General • There is a time limit for some operations. In this case, if no further operation is done for a certain period, the current operation is canceled. • By pressing SRC or MAP on the unit, you can also turn on the power.
ENGLISH 100 Disc operations General • In this manual, words “track” and “file” are interchangeably used. • This unit can also play back 8 cm discs. • This unit can only play back audio CD (CD-DA) files if different type of files are recorded in the same disc.
101 Additional information Playing MPEG files • This unit can play back MPEG files with the extension code <.mpg> or <.mpeg>. • The stream format should conform to MPEG system/program stream. • The file format should be MP@ML (Main Profile at Main Level)/SP@ML (Simple Profile at Main Level)/MP@LL (Main Profile at Low Level).
ENGLISH 102 Control screen • The following control screens appear only on the external monitor. DivX/MPEG/JPEG/MP3/WMA/WAV 1 Current folder (highlighted bar) 2 Current folder number/total folder num.
103 iPod/D. player operations • When you turn on this unit, the iPod or D. player is charged through this unit. • The text information may not be displayed correctly.
ENGLISH 104 AV Menu items • If you change the Amplifier Gain setting from High Power to Low Power while the volume level is set higher than 30 , the unit automatically changes the volume level to Volume 30 .
105 - Input Genre Name - More Store Characters available for word entry In addition to the roman alphabet (A – Z, a – z), the following characters can be used to input various information. Select a character on the keyboard Enter the selected character Inputting characters Ex.
ENGLISH 106 About sounds reproduced through the rear terminals • Through the analog terminals (Speaker out/LINE OUT): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed.
107 Information 108 Maint enance 109 Tr oubleshooting 117 Specifica tions KDNX5000_J.indb 107 KDNX5000_J.indb 107 23/1/07 7:01:16 pm 23/1/07 7:01:16 pm.
ENGLISH 108 Do not use the following discs: How to handle discs When removing a disc from its case, press down the center holder of the case and lift the disc out, holding it by the edges. • Always hold the disc by the edges. Do not touch its recording surface.
109 Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes/Remedies General • Parking Brake appears on the monitor. Some operations are prohibited without the parking brake engaged.
ENGLISH 110 Symptoms Causes/Remedies Navigation • Navigation guidance is incorrect. Installation angle setting is not correct. Set it correctly. ( ☞ [46] ) • Navigation guidance is sometimes incorrect. Reversing signal/speed signal wires are not connected.
111 Troubleshooting Symptoms Causes/Remedies FM/AM • SSM automatic presetting does not work. Store stations manually ( ☞ [53] ). • Static noise while listening to the radio. Connect the antenna firmly. Satellite radio • CALL 1-888-539-SIRIUS TO SUBSCRIBE appears on the monitor.
ENGLISH 112 Symptoms Causes/Remedies Disc playback • Not Support appears on the monitor. The format of the disc is supported. • Disc Error appears on the monitor. Insert the disc correctly again. • Eject Error or Loading Error appears on the monitor.
113 Troubleshooting Symptoms Causes/Remedies Music server • Sound does not come out while copying music files. This is not a malfunction. • Sound does not come out in the map screen while recording a CD. This is not a malfunction. • Cannot change the source while recording/copying.
ENGLISH 114 Symptoms Causes/Remedies CD changer • No Disc appears on the monitor. • Insert a disc into the magazine. • A disc is inserted upside down. Insert the disc correctly. • No Magazine appears on the monitor. Insert the magazine. • No Files appears on the monitor.
115 Troubleshooting * For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter. Symptoms Causes/Remedies Bluetooth* • Bluetooth device does not detect the unit. This unit can be connected with one Bluetooth cellular phone and one Bluetooth audio device at a time.
ENGLISH 116 Playback sources Dolby Digital Compressed digital audio, developed by Dolby Laboratories, which enables multi- channel encode to create the realistic surround sound. DTS Compressed digital audio, developed by Digital Theater Systems, Inc., which enables multichannel like Dolby Digital.
117 Specifications Specifications Navigation System System & Service L1, C/A code Global Positioning System Standard Positioning Service Reception System 15-channel multi-channel reception system Reception Frequency 1 575.
ENGLISH 118 Tuner Frequency Range FM (with channel interval set to 100 kHz or 200 kHz): 87.5 MHz to 107.9 MHz FM (with channel interval set to 50 kHz): 87.5 MHz to 108.0 MHz AM (with channel interval set to 10 kHz): 530 kHz to 1 710 kHz AM (with channel interval set to 9 kHz): 531 kHz to 1 602 kHz FM Tuner Usable Sensitivity 11.
119 Specifications HDD HDD 40 GB (Map data: 16 GB / Storage: 24 GB) MP3 (MPEG Audio Layer 3) Max. Bit Rate: 320 kbps WMA (Windows Media® Audio) Max. Bit Rate: 320 kbps Monitor Screen size 3.
© 2007 Victor Company of Japan, Limited 0107NSMMDWJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! EN, SP, FR Rear_NX5000.
1 KD-NX5000 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement LVT1627-002A [J] 0107NSMMDWJEIN EN, SP, FR ©2007 Victor Company of Japan, Limited ENGLISH This unit is designed to operate on 12 V DC , NEG A TIVE g rou nd el ec tri cal systems .
2 *1 When you stand the unit, be careful not to damage the fuse on the rear. *1 Al poner la unidad vertical, tenga cuidado de no dañar el fusible provisto en la parte posterior. *1 Lorsque vous mettez l’appareil à la verticale, faire attention de ne pas endommager le fusible situé sur l’arrière.
3 Removing the unit Before removing the unit, release the rear section. Extracción de la unidad Antes de extraer la unidad, libere la sección trasera.
4 REVERSE GEAR SIGNAL KD-NX5000 ENGLISH ESPAÑOL FRANÇAIS A Typical Connections / Conexiones tipicas / Raccordements typiques Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color.
5 KD-NX5000 LINE OUT (REAR) LINE OUT (FRONT) SUBWOOFER OUT F Connecting the external amplifiers / Cone xión a los amplifi cadores externos / Conne xion d’ amplifi cateurs e xtérieurs You can connect amplifiers to upgrade your car stereo system.
6 H External component / Componente exterior / Appareil extérieur *8 Line Input Adapter KS-U57 (separately purchased) *8 Adaptador de entrada de línea KS-U57 (adquirido opcionalmente) *8 Adaptateur .
KD-NX5000 HDD NAVIGATION/DVD RECEIVER FESTPLATTEN-NAVIGATIONSSYSTEM/DVD-RECEIVER SYSTÈME DE NAVIGATION À DISQUE DUR/RÉCEPTEUR DVD For installation and connections, refer to the separate manual. Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
2 ENGLISH Warning: If you need to operate the unit while driving, be sure to look ahead carefully or you may be involved in a traffic accident. Every time you turn on the unit, the screen below appears. Take enough care when operating the unit and make sure safe driving.
3 When the temperature is low, the HDD may take some time to start up, or may reboot automatically. This unit does not function properly unless the speed signal lead is connected (refer to the Installation/Connection Manual). It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.
4 ENGLISH How to detach/attach the control panel Detaching Attaching How to forcibly eject a disc If a disc cannot be recognized by the unit or cannot be ejected, eject the disc as follows. Emergency Eject and No Eject (or Eject OK ) appear on the monitor.
5 This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.
6 ENGLISH ENGLISH 8 I ntr oduc tion Initial settings Basic operations Pa r ts index Remote contr oller—RM-RK250 18 N a vigation sy st em Basic operations Registering y our home Star ting guidance Se.
7 51 R adio Listening to the radio RDS operations D AB operations 59 D iscs and HDD Disc operations Music ser ver operations CD changer operations 79 O ther func tions iP od/D . player operations Playing other external components Using Bluetooth devic es AV Menu items S ound equalization 109 Tr oubleshooting 117 Specifications KDNX5000_E_eng.
8 ENGLISH Initial settings When you turn on the unit for the first time, the initial setup screen appears. Follow the procedure below and make necessary settings. 4 Reverse Polarization Engage the parking brake, step on the brake pedal, then switch the gear lever.
9 Sensor Status Learning Lv. :0 GPS Antenna :OK [5] Speed Signal :12.0 Parking Brake :Off Direction :Forward Calibrating... Calibration Before using the Navigation System first time, it is required to calibrate the Navigation System.
10 ENGLISH Reset the unit. • Use only when the internal system malfunctions. Basic operations To turn on the power To turn off the power [Hold] To drop the volume in a moment (ATT) ATT indicator flashes. To restore the sound, press the same button again.
11 Basic operations To change the display of AV screens Vehicle information AV screen 2 * The number and contents of AV screens depend on the source. ** Appears only when you have selected Video or Camera for Video Input setting ( ☞ [94] ).
12 ENGLISH Menu operations Map screen AV screen To call up a menu AV Menu ☞ [90] Destination Menu ☞ [42] Information Menu ☞ [42] Setup Menu ☞ [43] Destination 1/2 Home Return Address POI Previ.
13 Basic operations 1 Call up AV Menu . 2 Select EQ in AV Menu . 3 Change the setting as you like. Now the setting is changed. Press DISP to exit from the menu, or BACK to go back to the previous menu. Display 1/2 Language Demonstration Wall Paper Scroll Tag Display [Off] Current menu title Current setting of the selected item.
14 ENGLISH 12 8 46 3 9 pq w e 7 5 Parts index On the map screen On the AV screens On menu screens 1 /ATT • Turn on the unit. • Turn off the unit if pressed and held. • Attenuate/restore the sound. 2 AV/SRC Switch to the AV screen. Change the source.
15 Installing the batteries Before using the remote controller: • Aim the remote controller directly at the remote sensor on the unit. The unit is equipped with the steering wheel remote control function. • See the Installation/Connection Manual (separate volume) for connection.
16 ENGLISH Operations from the remote controller On the map screen On the AV screens On menu screens 1 AV/OFF Switch to the AV screen. • Change the source. In Navigation Menus: Switch to the AV screen. In AV Menu: Change the source and switch to the AV screen.
17 Only on the AV screens t • Make selections in disc menus. • DISC +/– buttons: Change discs for a CD changer. y ENT Disc: Confirm the selection. u TOP M DVD/DivX 6: Show the disc menu. ☞ [67] VCD with PBC: Resume PBC playback. ☞ [67] i DVD MENU o OSD Display the on-screen bar.
18 ENGLISH Navigation System 20 Sa fe ty instruc tions for Naviga tion S y stem 22 Basic operations 24 Registering y our home To register y our home 24 To go home 24 26 Star ting guidance Setting a de.
19 19 36 Arranging y our rout e Setting places to stop b y 36 Sa ving and loading rout es 37 Av oiding a congestion ahead 37 38 Registering fav ourit e points Marking your fa vourit e points 38 Editin.
20 ENGLISH Safety instructions for Navigation System SAFETY INSTRUCTIONS Use of the Navigation System is only permitted if the traffic conditions are suitable and you are absolutely sure that no risk, obstruction or inconvenience will be incurred to you, your passengers or other road users.
21 When replacing/rotating the tyres: It is required to clear all the accumulated calibration data which is important for accurate navigation. To clear the data, perform Reset Calibration on page 46. Safety instructions for Navigation System © 2006 NAVTEQ All rights reserved.
22 ENGLISH Basic operations Adjust the volume. Switch to the AV screen. Call up Shortcut Menu. Current position mode —The map scrolls automatically so that your position is always at the centre of the map. Operate the current AV source. ( ☞ [50] ) Change the map view.
23 Basic operations To change the map view The map view changes as follows: Heading Up = 3D Map = North Up You can also change the map view through Setup Menu ] Map Options ] Map View ( ☞ [45] ). North Up The map view is oriented with north “upwards,” like usual paper maps.
24 ENGLISH To register your home Register your home or your office, wherever you go often, as Home, so that you can easily set that place as destination. • You can register homes only after calibration is finished. ( ☞ [9] ) 1 If you are at home now, check that your home is displayed at the centre of the map.
25 Registering your home What is Shortcut Menu? On the map screen, you can call up Shortcut Menu by pressing ENT. Shortcut Menu is a gateway to various operations. While guided While not guided To select an icon, press ENT or one of the four keys on the right circle button corresponding to the icon.
26 ENGLISH Scroll the map to display the destination at the centre of the map. Call up Shortcut Menu. Select [Go Here] to start guidance. The System starts calculating the route to the selected destination, and guidance starts.
27 Call up Destination Menu. Select one of the methods to search for your destination. * During guidance, Cancel Guide appears. ** During guidance, Avoid Section appears. • You cannot select the items when they are grey. The information on the search result appears.
28 ENGLISH 1 Enter characters. • Available characters are automatically narrowed down as the System searches its database for matches. 2 Display the list of matches. • This button is available when the matches are narrowed down to 100 or less. • You can also display the list of matches by pressing and holding ENT.
29 Searching for a place From the list of POI ( POI ) The System has a huge database of POI (Point Of Interest), such as restaurants, petrol stations, hospitals, etc. 1 Call up Destination Menu. 2 Destination ] POI 3 Select a country from the list. • Proceed to the next step if a country is already selected.
30 ENGLISH From last destinations ( Previous ) You can select a place from the last 50 destinations and via points. 1 Call up Destination Menu. 2 Destination ] Previous The list of previous destinations/via points is displayed. 3 Select a place from the list.
31 By coordinates ( Coordinates ) 1 Call up Destination Menu. 2 Destination ] Coordinates 3 Input the latitude and the longitude. 4 Select Detail when finished. By postcode ( Postcode ) • Search by postcode is not available in some countries. 1 Call up Destination Menu.
32 ENGLISH How you are guided To cancel guidance 1 Call up Shortcut Menu. 2 Select [Cancel Guidance] . Destination found Route calculation Screen while guided To cancel calculation, press BACK.
33 How you are guided To repeat the last voice guidance [Hold] 2 1 3 Guidance at turns When you approach a turn, the System guides you with voice guidance and indications on the screen. • Guidance voice comes out only through the front speakers (and the front line out on the rear).
34 ENGLISH Getting information on your route and places To see the itinerary and the turns list Trip information Trip Distance Driven 8.1km Time Driven 0:12 Average speed 40km/h • You can also view the trip through Information Menu ] Trip . • You can also view the turns list through Information Menu ] Turns List .
35 The guidance continues even when you switch the display to an AV screen. Guidance information is displayed on the lower-right corner of the AV screen.
36 ENGLISH You can also set via points on the map through Shortcut Menu ] [Add to Via Point] . 3 Select the via point you want to move. 4 Move the selected via point in the list. 5 Repeat steps 3 and 4 to move other via points. 6 Finish the rearrangement.
37 Saving and loading routes You can save up to 50 combinations of destination and via points. You can easily call up your usual route without the trouble of setting destinations. • Each route can contain up to nine via points. To save a route 1 Select your destination (and via points if necessary), and start guidance.
38 ENGLISH Registering favourite points Just like you mark your friend’s house or a nice Chinese restaurant on your map book, you can register your favourite points in the system. Marking your favourite points • You can register 300 favourite points.
39 Registering favourite points 4 Select the item you want to edit. Name The name of the favourite point. • You can use up to 32 characters. Group See the table on the right for the available ten groups. Categorize the favourite points so that you can find them easily.
40 ENGLISH Traffic information on map—TMC What is TMC? TMC (Traffic Message Channel) is a technology for delivering real-time traffic information to drivers. The traffic information sent by a TMC radio station is received and analysed by the System.
41 How TMC information is reflected in navigation If Bypass Traffic is set to Manual Reroute ( ☞ [44] ), [Reroute] appears on the screen when the TMC service informs the System of traffic accidents or congestion ahead on your route.
42 ENGLISH Navigation menu items ☞ [12] for the detailed Menu operations. Destination Menu Menu items Home Start guidance to a home. (Appears only while not guided.) ☞ [24] Cancel Guide Cancels the guidance. (Appears only while guided.) ☞ [24, 26, 32] Return Starts guidance to the place where you have started your last guidance.
43 Setup Menu Menu items Selectable settings (Initial setting) Guidance Voice Gender Female, Male *1 Volume Adjust the volume of the voice guidance. *1 Off , 01 to 50 ( 25 ) Output Channel Select the guidance output channel.
44 ENGLISH Menu items Selectable settings (Initial setting) Guidance Options Interruption Select the voice guidance output on an AV screen. • A small icon of the next turn is always displayed at the lower- right corner of the AV screen while guided, regardless of this setting.
45 Menu items Selectable settings (Initial setting) Map Options Map View North Up , Heading Up , 3D Map ☞ [23] Auto Zoom Select how the zoom scale changes. Off : (Effective only while guided) Zoom into 30 m scale at turns if Guidance View is set to Auto Magnification .
46 ENGLISH Menu items Selectable settings (Initial setting) System Setting Installation Angle Select the angle of the unit measured by the supplied gauge. (See also the Installation/Connection Manual.) 1 : –5.0° to 1.0° 2 : 1.0° to 6.0° 3 : 6.0° to 14.
47 Additional information Initial settings • If you select On for Store Display Mode , the system starts up in demonstration mode for shops, and the initial setup screen appears every time you turn on the unit after turning off and on the ignition switch.
48 ENGLISH – when changing tyres or attaching chains on the tyres – when tyre slip occurs continuously and frequently – after running on areas other than a road (e.
49 Additional information List of POI icons Business Convention/Conference Centre Office/Factory City/Town Capital City National Capital Community Bank Civic/Community Centre College Or University Hos.
ENGLISH 50 List of TMC icons Traffic Jam Road works Road is blocked or closed Traffic lane closed Accident Condition Other Caution Event Information AV source operations in the map screen Source Tuner Auto search. (No function) DAB Auto search. Change services.
51 Radio 52 Listening to the r adio FM station automa tic presetting —SSM (Strong-sta tion Sequential Memor y) 52 Manual presetting 52 Selec ting pr eset stations 53 When an FM st ereo br oadcast is.
ENGLISH 52 This function works only for FM bands. You can preset six stations for each band. 1 2 3 AV Menu ] Mode ] SSM 4 SSM appears on the display. Local FM stations with the strongest signals are searched and stored automatically in the FM band. Select “TUNER.
53 FM1 Preset4 Classic Station name 92.5 MHz 10:35 AM 80 km/h P T Y FM1 Preset4 Classic Station name 92.5 MHz 10:35 AM 80 km/h P T Y Listening to the radio Selecting preset stations On the remote: 1 2 Select a preset number. From the Preset List 1 Display the Preset List.
ENGLISH 54 Searching for FM RDS programme— PTY Search You can search for your favourite programmes being broadcast by selecting the PTY code for your favourite programmes. 1 [Hold] 2 PTY Mode ] PTY Search ] PTY Preset List or PTY List • To select from the six preset PTY codes, select PTY Preset List .
55 RDS operations Available PTY codes: News, Affairs, Info, Sport, Educate, Drama, Culture, Science, Varied, Pop M, Rock M, Easy M, Light M, Classics, Other M, Weather, Finance, Children, Social, Reli.
ENGLISH 56 DAB operations Programme A broadcast in different frequency areas (01 – 05) Select “DAB.” Search for an ensemble. • Manual Search: Hold either 4 or ¢ until Manual Search appears on the monitor, then press it repeatedly. Select a service (either primary or secondary) to listen to.
57 DAB1 Preset4 Ensemble label 227.360 MHz 12C C H DAB operations 4 Select a preset number. [Hold] Selecting preset services On the unit: After steps 1 and 3 of “Presetting services”... On the remote: 1 2 * To enjoy DAB, connect a DAB tuner (separately purchased) to the unit.
ENGLISH 58 • If lights up, Announcement Standby Reception is activated. • If flashes, Announcement Standby Reception is not yet activated. To activate, tune in to another service providing the signal required for Announcement Standby Reception. will stop flashing and remain lit.
59 Discs and HDD 60 Disc operations Play able discs/files 61 Selec ting playback modes 64 Selec ting tracks on the list 65 Pr ohibiting disc ejection 65 Remote opera tions 65 Special functions for DVD.
ENGLISH 60 If “ ” appears on the monitor, the unit cannot accept the operation you have tried to do. • In some cases, without showing “ ,” operations will not be accepted.
61 Disc operations Playable discs/files Disc type Recording format, file type, etc. Playable DVD DVD Video DVD Audio DVD-ROM DVD Recordable/Rewritable (DVD-R *1 /-RW, +R/+RW *2 ) • Compliant to UDF bridge format • DVD-RAM cannot be played.
ENGLISH 62 File type DivX, MPEG MP3, WMA, WAV CD 4 , ¢ Press: Select track Hold: Reverse/ forward search *1 4 , ¢ Press: Select file Hold: Reverse/ forward search *1 ∞ , 5 Press: Select folder Hol.
63 01 01 0:00:03 G 01 0:00:03 Disc operations DVD Audio VCD DVD Video 4 , ¢ Press: Select chapter Hold: Reverse/ forward search *1 ∞ , 5 Press: Select title 4 , ¢ Press: Select track Hold: Reverse/ forward search *1 ∞ , 5 Press: Select group 4 , ¢ Press: Select track Hold: Reverse/ forward search *1 01 01 0:00:03 T C Audio format Title no.
ENGLISH 64 Selecting playback modes You can use only one of the following playback modes— Intro / Repeat / Random . Ex. To select Track Repeat 1 2 AV Menu ] Mode ] Repeat ] Track 3 When one of the playback modes is selected, the corresponding indicator lights up on the disc information screen.
65 Disc operations Selecting tracks on the list If a disc includes folders, you can display the Folder/Track Lists, then start playback. 1 Display the Folder List. [Hold] 2 Select a folder, then a track. • If you press ENT while a folder is selected, all tracks in the selected folder are played back.
ENGLISH 66 Selecting an item with number keys You can select a chapter/title/group/folder/ track by inputting its number. Ex.: To select a title of a DVD Video. 1 [twice] On the playback screen: TITLE – – appears on the screen. On the disc information screen: The title number lights up in grey.
67 Disc operations Menu driven operations (For DVD and DivX 6) 1 or (only for DVD Video and DivX) 2 Select an item you want to play. 3 Quick skip Return/advance the scenes by 5 minutes. While playing... current playback position PBC playback Select an item on the menu.
ENGLISH 68 [twice] Operations using the on-screen bar For DVD/VCD/DivX/MPEG/JPEG discs, you can check the disc information and use some functions through the on-screen bar. 1 Display the on-screen bar. • When you press OSD once, the information bar appears.
69 Disc operations DV D -V T 02 -C 03 TOTAL 1:25:58 TIME TITLE CHAP RPT C. RPT Information Operation 1 Disc type 2 Audio signal format (for DVD) PBC (for VCD) 3 Playback mode T. RPT Title Repeat/Track Repeat * C. RPT Chapter Repeat * F. RPT Folder Repeat * D.
ENGLISH 70 Music server operations The built-in HDD works not only as storage for navigation data, but as a music server, where you can record CD tracks and music files (MP3, WMA and WAV files). The recorded tracks are categorized into genres and albums.
71 Selecting playback modes You can use only one of the following playback modes— Intro / Repeat / Random . Ex. To select Track Repeat 1 2 AV Menu ] Mode ] Repeat ] Track 3 When one of the playback modes is selected, the corresponding indicator lights up on the monitor.
ENGLISH 72 Recording/copying tracks from a disc • You can record tracks of audio CDs into the HDD. Record appears in AV Menu . • You can copy music files (MP3, WMA, WAV) into the HDD. Copy appears in AV Menu . Preparation: Insert the disc to record/copy, and select DISC as the source.
73 To record selected tracks 1 2 AV Menu ] Record ] Select Track 3 Select the tracks to record. • Checkbox operations ☞ [105] 4 5 Select the genre and album to record the tracks into. • Repeat the same procedure to select the album. 6 Select a compression mode.
ENGLISH 74 To copy selected tracks 1 2 AV Menu ] Copy ] Select Track 3 Select the tracks to copy. • Checkbox operations ☞ [105] 4 5 Select the genre to copy the tracks into. 6 Select the album to copy the tracks into. Copying... appears, and copying starts.
75 Editing the library • Library editing is possible only when HDD is selected as the source. Changing the titles You can change the names of genres, albums and tracks in the HDD. Ex. To change the name of a track 1 2 AV Menu ] Title Entry 3 Select a genre, then an album.
ENGLISH 76 Checking the remaining storage size 1 2 AV Menu ] Edit ] HDD Free Area Free space of the music server Deleting tracks, albums, or genres Ex. To delete tracks • Select the album which the target tracks belong to. 1 2 AV Menu ] Edit ] Delete ] Track 3 Check the tracks to delete.
77 CD changer operations Select “CD-CH.” Playback starts automatically. Display the Disc List. • Each time you hold the button, you can display the other list of the remaining discs. Select a disc to start playing. It is recommended to use a JVC MP3-compatible CD changer with your unit.
ENGLISH 78 Selecting playback modes You can use only one of the following playback modes—Intro/Repeat/Random. Ex. To select Track Repeat 1 2 AV Menu ] Mode ] Repeat ] Track 3 When one of the playback modes is selected, the corresponding indicator lights up on the monitor.
79 Other functions 80 iP od/D . play er oper ations Selec ting a track fr om the play er’ s menu 80 Selec ting playback modes 80 81 Playing other e x ternal componen ts External input 81 V ideo inpu.
ENGLISH 80 Selecting playback modes 1 2 AV Menu ] Mode ] Repeat or Random Repeat One : Functions the same as “Repeat One” or “Repeat Mode = One.” All : Functions the same as “Repeat All” or “Repeat Mode = All.” Random Song /On : Functions the same as “Shuffle Songs” or “Random Play = On.
81 4 Assign a title. • Inputting characters ☞ [105] • You can use up to 16 characters. 5 Select Store . • While driving at a speed greater than 10 km/h, operations of inputting are prohibited.
ENGLISH 82 Video input You can connect an external component to the VIDEO IN plug. Preparation: When connecting a video component Make sure Ext Input is selected for the external input setting, and Video for the video input setting. ( ☞ [94] ) • You cannot view the video picture when the parking brake is not engaged.
83 Using Bluetooth® devices— Mobile phone/audio player Using Bluetooth devices For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200) to the CD changer jack on the rear. • Refer also to the instructions supplied with the Bluetooth Adapter and the Bluetooth device.
ENGLISH 84 Registering using Open 1 Mode ] Open 2 Enter a PIN (Personal Identification Number) * code to the unit. • Inputting characters ☞ [105] • You can enter any number you like (1- digit to 16-digit number). * Some devices have their own PIN code.
85 Bluetooth Phone *2 P902i Calling... Jack 09845671234 10:35 Using Bluetooth devices Connecting/disconnecting a registered device 1 On the Bluetooth Phone screen or the Bluetooth Audio screen, select a registered device you want to connect/disconnect.
ENGLISH 86 On the unit: 1 Call up the preset list. 2 Select the preset number to call. You can also access the preset number list through Phone Menu ] List .
87 Select “Bluetooth Audio.” Start playback. Using the Bluetooth audio player *1 Audio player Mobile phone with audio function *2 Each time you press 5 ∞ , the registered device names (and New Device when a new device can be registered) appear in turn.
ENGLISH 88 Phone Menu Menu items Selectable settings (Initial setting) Dial *1 Redial Select a phone number from the list of the phone numbers you have dialed. Received Calls Select a phone number from the list of the received calls. Phonebook Select a name, then phone number from the phone book of the connected mobile phone.
89 Using Bluetooth devices Menu items Selectable settings (Initial setting) Connect *3 Only for the registered devices. After selecting a device from among the registered devices ( ☞ [85, 87] ), establish the connection with it. ☞ [85] Disconnect *3 Only for the device being connected.
ENGLISH 90 AV Menu items Menu items Selectable settings (Initial setting) Setup ] Display Language *1 Dansk, Deutsch, English UK, English US, Español, Français, Italiano, Nederlands, Svenska Demonstration Off : Cancels. On : Activates the demonstration on the monitor.
91 Menu items Selectable settings (Initial setting) Setup ] Display Tag Display Off : Cancels. On : Shows the Tag data while playing MP3/WMA/WAV tracks on discs or on HDD. Dimmer Off : Cancels. On : Activates dimmer. Auto : Dims the monitor when you turn on the headlights.
ENGLISH 92 Menu items Selectable settings (Initial setting) Setup ] Disc *4 Monitor Type Select the monitor type to watch a wide screen picture. 16:9 : Select when the aspect ratio of the external monitor is 16:9. 4:3 Letter Box / 4:3 Pan Scan : Select when the aspect ratio of the external monitor is 4:3.
93 Menu items Selectable settings (Initial setting) Setup ] Disc *4 D. Range Comp. You can enjoy a powerful sound at a low volume level while playing Dolby Digital software. Auto : Select to apply the effect to multi-channel encoded software. On : Select to always use this function.
ENGLISH 94 Menu items Selectable settings (Initial setting) Setup ] Input External Input *8 When connecting an external component to the CD changer jack on the rear. Changer : CD changer, iPod, or D. player. Ext Input : Any other than the above. • For connecting the DAB tuner or the Bluetooth Adapter, this setting is not required.
95 Menu items Selectable settings (Initial setting) Setup ] Others Beep Off : Cancels. On : Activates the key-touch tone. Telephone Muting You can mute the sound of the System (AV source sounds and voice guidance) while you talk on the mobile phone. Off : Cancels.
ENGLISH 96 Menu items Selectable settings (Initial setting) Sound High Pass Filter Through : Select when the subwoofer is not connected. On : Select when the subwoofer is connected. Crossover Adjust the crossover frequency between the front/rear speakers and the subwoofer.
97 Menu items Selectable settings (Initial setting) Aspect [Disc]/ Aspect [Video] You can change the aspect ratio of the picture. Aspect ratio of incoming signal 4:3 16:9 Full : For 16:9 original pictures Regular : For 4:3 original pictures Auto : • For “DISC”: Aspect ratio is automatically selected to match to the incoming signals.
ENGLISH 98 Storing your own adjustment You can store your adjustment into User 1 , User 2 , and User 3 . 1 Repeat steps 1 and 2 above, then in step 3 ... 2 Adjust. 3 Store the setting into User 1 , User 2 or User 3 . Selecting an equalizer type 1 2 AV Menu ] EQ 3 Select an equalizer type.
99 Sound equalization / Additional information Additional Information General • There is a time limit for some operations. In this case, if no further operation is done for a certain period, the current operation is canceled. • By pressing SRC or MAP on the unit, you can also turn on the power.
ENGLISH 100 • For DVD-R/DVD-RW: This receiver can play only discs recorded in the DVD-Video format. (Discs recorded in the DVD-VR format cannot be played.) • DVD-RWs or CD-RWs may require a longer readout time since the reflectance of DVD- RW and CD-RW is lower than that of regular discs.
101 Additional information On-screen guide icons During play, the following guide icons may appear for a while on the monitor. Appears at the beginning of a scene containing multi-subtitle languages (for DVD only). Appears at the beginning of a scene containing multi-audio languages (for DVD only).
ENGLISH 102 Music server operations • Sound quality may deteriorate if you select Normal Quality for recording mode. • While recording, recorded sounds are reproduced from the speakers. When recording is stopped, CD original sounds are reproduced.
103 iPod/D. player operations • When you turn on this unit, the iPod or D. player is charged through this unit. • The text information may not be displayed correctly.
ENGLISH 104 AV Menu items • If you change the Amplifier Gain setting from High Power to Low Power while the volume level is set higher than 30 , the unit automatically changes the volume level to Volume 30 .
105 - Input Genre Name - More Store Characters available for word entry In addition to the roman alphabet (A – Z, a – z), the following characters can be used to input various information. Select a character on the keyboard Enter the selected character Inputting characters Ex.
ENGLISH 106 106 About sounds reproduced through the rear terminals • Through the analog terminals (Speaker out/LINE OUT): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. ( ☞ [92] Down Mix .
107 Information 108 Maint enance 109 Tr oubleshooting 117 Specifica tions KDNX5000_E_eng.indb 107 KDNX5000_E_eng.indb 107 14/2/07 10:00:15 pm 14/2/07 10:00:15 pm.
ENGLISH 108 Do not use the following discs: How to handle discs When removing a disc from its case, press down the centre holder of the case and lift the disc out, holding it by the edges. • Always hold the disc by the edges. Do not touch its recording surface.
109 Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service centre. Symptoms Causes/Remedies General • Parking Brake appears on the monitor. Some operations are prohibited without the parking brake engaged.
ENGLISH 110 Symptoms Causes/Remedies Navigation • Navigation guidance is incorrect. Installation angle setting is not correct. Set it correctly. ( ☞ [46] ) • Navigation guidance is sometimes incorrect. Reversing signal/speed signal wires are not connected.
111 Troubleshooting Symptoms Causes/Remedies DAB tuner • No DAB Signal appears on the monitor. Move to an area with stronger signals. • Reset 08 appears on the monitor. Connect this unit and the DAB tuner correctly, then reset the unit ( ☞ [4] ).
ENGLISH 112 Symptoms Causes/Remedies MP3/WMA/WAV playback • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs ( ☞ [61] ). • Add appropriate extension codes to the file names.
113 Troubleshooting Symptoms Causes/Remedies Music server • Sound does not come out while copying music files. This is not a malfunction. • Sound does not come out in the map screen while recording a CD. This is not a malfunction. • Cannot change the source while recording/copying.
ENGLISH 114 Symptoms Causes/Remedies CD changer • No Disc appears on the monitor. • Insert a disc into the magazine. • A disc is inserted upside down. Insert the disc correctly. • No Magazine appears on the monitor. Insert the magazine. • No Files appears on the monitor.
115 Troubleshooting * For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter. Symptoms Causes/Remedies Bluetooth* • Bluetooth device does not detect the unit. This unit can be connected with one Bluetooth mobile phone and one Bluetooth audio device at a time.
ENGLISH 116 Playback sources Dolby Digital Compressed digital audio, developed by Dolby Laboratories, which enables multi- channel encode to create the realistic surround sound. DTS Compressed digital audio, developed by Digital Theater Systems, Inc., which enables multichannel like Dolby Digital.
117 Specifications Specifications Navigation System System & Service L1, C/A code Global Positioning System Standard Positioning Service Reception System 15-channel multi-channel reception system Reception Frequency 1 575.
ENGLISH 118 Tuner Frequency Range FM 87.5 MHz to 108.0 MHz AM (MW) 522 kHz to 1 620 kHz (LW) 144 kHz to 279 kHz FM Tuner Usable Sensitivity 11.3 dBf (1.0 μV/75 Ω ) 50 dB Quieting Sensitivity 16.3 dBf (1.8 μV/75 Ω ) Alternate Channel Selectivity (400 kHz) 65 dB Frequency Response 40 Hz to 15 000 Hz Stereo Separation 40 dB Capture Ratio 1.
119 Specifications HDD HDD 40 GB (Map data: 16 GB / Storage: 24 GB) MP3 (MPEG Audio Layer 3) Max. Bit Rate: 320 kbps WMA (Windows Media® Audio) Max. Bit Rate: 320 kbps Monitor Screen size 3.
© 2007 Victor Company of Japan, Limited Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät z.
1 6 mm 3 mm 5 mm 5 mm KD-NX5000 Installation/Connection Manual Einbau/Anschlußanleitung Manuel d’installation/raccordement LVT1628-004A [E] 0207NSMMDWJEIN EN, GE, FR ©2007 Victor Company of Japan, Limited ENGLISH This unit is designed to operate on 12 V DC , NEG A TIVE g rou nd el ec tri cal systems .
2 When using the optional stay / Beim Verwenden der Anker- Option / Lors de l’utilisation du hauban en option When installing the unit without using the sleeve / Beim Einbau des Geräts ohne Halteru.
3 Removing the unit Before removing the unit, release the rear section. Ausbau des Geräts Vor dem Ausbau des Geräts den hinteren Teil freigeben. Insert the two handles, then pull them as illustrated so that the unit can be removed.
4 ENGLISH DEUTSCH FRANÇAIS B A Connections without using the ISO connectors / Anschlüsse ohne Verwendung der ISO-Steckverbinder / Connexions sans l’utilisation des connecteurs ISO Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit.
5 Connecting the reverse gear signal lead / Anschließen der Rückwärtsgangsignalleitung / Connexion du fil de signal de marche arrière To car battery An Autobatterie À la batterie de la voiture *3.
6 Connections for external component playback / Anschlüsse für externe Komponente / Connexions pour un appareil de lecture extérieur H I Connecting other external components / Anschließen anderen .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC LVT1627-001A è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC LVT1627-001A - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC LVT1627-001A imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC LVT1627-001A ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC LVT1627-001A, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC LVT1627-001A.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC LVT1627-001A. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC LVT1627-001A insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
