Manuale d’uso / di manutenzione del prodotto PC Presenter del fabbricante AMX
Vai alla pagina of 34
instruction manual Computer Control PC Presenter.
AMX Limited W arranty and Disc laimer AMX Corporation warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX Co.
T able of Contents i PC Presenter T able of Contents Introduction ............. ................ .......................................... ............................ ............ 1 TXC-MS(L) Transmitter .............................................
ii PC Presenter T able of Contents Programming Transmitter Pushbuttons ............................................ .............................. 21 Exiting pro gram mode ................... ............. ............. ............. ................ .
Intr oduction 1 PC Presenter Intr oduction The PC Presenter PC is a wireless PC ke yboard and mouse controller that can be used as a standalone unit or as an b us device connected to a Central Controll er via AXlink; controllin g PC keyboard and mouse functions, and d e vices connected to the AXlink bus.
Introduction 2 PC Presenter TXC-MS(L) T ransmitter The TXC-MS(L) is an ergonomically designed pushbutton transmitter with up to 26 pushbuttons, an optional laser trigger (TXC-MSL only), and PC m ouse disc. The pushbuttons acti vate PC functions or Axcess Push_Comm ands via infrared (IR) or radio frequenc y (RF) transmission.
Intr oduction 3 PC Presenter TXC-MS(L) contr ols The TXC-MS(L) is av ailable in configurations w ith up to 26 pu shbuttons and PC mouse controls (mouse disc and left and right mou se buttons). The TXC-MS(L) includes a custom engrav ed ov erlay with text as desired by the customer .
Introduction 4 PC Presenter AXR-MSE Wireless Mouse and Ke yboard Contr oller The AXR-MSE is the recei ver/processor component of the PC Presenter . The AXR-MSE recei ves RF or IR signals from the TXC- MS(L) transmitter using the attached RF recei ving antenna or an external IR sensor .
Intr oduction 5 PC Presenter FIG. 5 shows the rear and front panel feat ures of the AXR-MSE. AXR-MSE Specificat ions (Cont.) Rear Panel TNC RF antenna Accepts the flexible RF receiving antenna (up to 6 feet of RG-58 coax cable f or remote antenna set up can also be used).
Introduction 6 PC Presenter.
Pre-Installation 7 PC Presenter Pre-Installation Setting the TXC-MS(L) transmitter DIP switch The TXC-MS(L) transmitter transmits IR or RF si gnals, according to ho w you set position 1 on the 8-position DIP switch. The DIP swit ch is located under the battery cover , on the back of the TXC-MS(L), as shown in FIG.
Pre-Installation 8 PC Presenter Radio Code Settings Each pushbutton on the TXC-MS(L ) transmitter represents an Ax cess channel number . All of the pushbuttons on the transmitter represent a group of channel numbers. This gr ouping is kno wn as a radio code.
Pre-Installation 9 PC Presenter Setting the Device DIP s witch The eight-position Device DIP switch located on the front panel of the AXR-M SE as shown in FIG. 10 sets the AXlink device number for th e AXR-MSE. Each de vice on the AXlink bus must hav e a unique AXl ink device number .
Pre-Installation 10 PC Presenter The device can be 1 o f the 255 devices in an Axcess, Axcent, Axcent2, Axcent3, AXB-MPE, or AXB-EM232 system. The device number must match the de vice assignment in the Axcess program.
Pre-Installation 11 PC Presenter FIG. 12 shows a cl ose-up view of the SW2 and SW3 internal slide switches. 1. Discharge the static electricity from you r body and the screwdri ver . 2. Unplug all connectors from th e rear panel of the AXR-MSE. 3. Remov e the four Phillips- head scre ws on the sides of the enclosure.
Pre-Installation 12 PC Presenter For k eyboard use with a PC, slide the SW2 switch to the "PC" position as shown in FIG. 14. Setting Mouse Mode The PC Presenter supports PS2 mice b y default. If you prefer to use a se rial mou se you must set internal slide switch SW3 for this mode (FIG.
Pre-Installation 13 PC Presenter Wiring guidelines The AXR-MSE requires 65 mA @ 12 VDC power to operate properly . The Central Controller supplies power via the AXlink cable. The maximum w iring distance between the C entral Controller and AXR-MSE is determined by po w er consumption supplied voltage, and the wire gauge used for the cable.
Pre-Installation 14 PC Presenter.
Installing the PC Presenter 15 PC Presenter Installing the PC Presenter This section describes how to connect the AXR-MSE to the PC and to the Central Controller . Before installation, ch eck to verify that the Device DIP switch on the front panel of the A XR-MSE is set correctly .
Installing the PC Presenter 16 PC Presenter Installing the PC Presenter f or AXlink Operation T o use the PC Presenter as an integrated AXlink de vice, c onnect the AXR-MSE to the PC keyboard/mouse and a Central Controller . As an AXlink de vice, the PC Pr esenter controls PC keyboard/mouse functions as well as the devices on the AXlink b us.
Installing the PC Presenter 17 PC Presenter Make sure to connect only the GND wire on the AXlink connector when using a 12 VDC po wer supply . Do not connect the PWR wire to the AXlink connector's PWR opening.
Installing the PC Presenter 18 PC Presenter.
Programming the PC Presenter 19 PC Presenter Pr ogramming the PC Presenter This section describes how to program the PC Presenter . Before programming, make sure the PC Presenter is properly installed.
Programming the PC Presenter 20 PC Presenter The characters "C:>rem" before the blinking cursor indicat es that the PC Presenter is in program mode, waiting for a command key . 4. Press a command key . For a listing of available commands , type the character "H" .
Programming the PC Presenter 21 PC Presenter M - Display available memory Press "M" at the program/command prompt to display th e amount of memo ry av ailable in the PC Presenter: T - Long f.
Programming the PC Presenter 22 PC Presenter 4. Press the first transmitter b u tton to be programmed. When the button is pressed, the button's code number and an asterisk (*) appear at th e DOS prompt. The following example sho ws that the transmitter button (code number 128) was pressed.
Programming the PC Presenter 23 PC Presenter Pr ogramming the PC Presenter for Use With an Axcess Central Contr o ller The PC Presenter can be connected to a Central Controller via AXlink, to con trol devices on the AXlink bus. The follo w ing sub-sections descri be the Axcess commands for the PC Presenter .
Programming the PC Presenter 24 PC Presenter Send_Strings All recei ved Send_Strings are tran slated to ke ystrokes and output to the attached PC's ke yboard port. The follo wing table represen ts the em bedded codes defining special characters that can be included with the string but may not be repres ented by the ASCII character set.
Programming the PC Presenter 25 PC Presenter Mouse Contr ol Channels While on, channels 1 through 32 will move the mouse cursor in one of 16 directions and one of two speeds. The following table lis ts the direction and speed for each channel. Send_String s (Cont.
Programming the PC Presenter 26 PC Presenter Using Levels The mouse operates on an X-Y (hor izontal-v ertical) axis. Le vel one is the X-axis and lev el two is the Y -axis.
Using the O LDesign Engravin g Program 27 PC Presenter Using the OLDesign Engra ving Pr ogram The AMX OLDesign software program is a W i ndo ws-b ased design tool for creat ing panel overlays, pushbutton names, and pushb utton operation description s.
Using the OLDesign Engraving Program 28 PC Presenter.
TXC-MS(L) Batter y Replacement 29 PC Presenter TXC-MS(L) Battery Replacement The TXC-MS(L) transmitter uses two AA ba tterie s. Under normal condition s, battery life will exceed one year . Use alkaline batteries for long battery life and optimum performance.
AMX reserves the right to alter specif ications with out no tice at a ny time. brussels • dallas • los ang eles • mexico city • philad elphia • shanghai • singapor e • tampa • toronto* • yo rk 3000 research drive, richardson, TX 75082 USA • 469.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il AMX PC Presenter è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del AMX PC Presenter - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso AMX PC Presenter imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul AMX PC Presenter ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il AMX PC Presenter, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del AMX PC Presenter.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il AMX PC Presenter. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo AMX PC Presenter insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
