Manuale d’uso / di manutenzione del prodotto NI-3101-SIG del fabbricante AMX
Vai alla pagina of 176
Operation/Reference Guide NetLinx Controllers NI-3101-SIG Signature Series NetLinx ® Integrated Controller Latest Release: 4/14/200 8.
AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under n ormal use for three (3) years from the date of purchase fr om AMX, with the foll.
i NI-3101-SIG Signature Series NetLinx Integra ted Controller Introduction .................. ...................................................................... ................ 1 NI-3101-SIG Specifications......... .................... ..........
ii NI-3101-SIG Signature Series NetLinx Int egrated Controller Verifying the current version of NetLinx Master Firmware ..................................... 34 Upgrading the On-board Master Firmware via an IP ................... .................... .
iii NI-3101-SIG Signature Series NetLinx Integra ted Controller Server - Creatin g a Request for an SSL Certificate ........ ................. ................ ............. .. 81 Common Steps for Requesting a Certificate from a CA .... ..............
iv NI-3101-SIG Signature Series NetLinx Int egrated Controller Option 3 - Add user ........ ............. ................ ............. ................ ............. ................. .... 121 Option 4 - Edit User ............... ............. .....
Introduction 1 NI-3101-SIG Signature Series NetLinx Inte grated Controller Introduction The NI-3101-SIG Signature Series NetLinx Integrated Controller satisfies the control and automation features com.
Introduction 2 NI-3101-SIG Signature Series NetL inx Integrated Controller NI-3101-SIG Specifications The NI-3101-SIG (FIG. 1) provides support for 6 configurable RS-232/RS-422/RS-485 Ports, 8 IR/ Serial Output ports, 8 Digital Inpu t/Output ports, and 8 Relays.
Introduction 3 NI-3101-SIG Signature Series NetLinx Inte grated Controller NI-3101-SIG Specifications (Cont.) Front Panel Components: Input/Output LED s • White Output LED blinks w hen the Controller transmits data, sets channels On/Off, sends data strings, etc.
Introduction 4 NI-3101-SIG Signature Series NetL inx Integrated Controller NI-3101-SIG Specif ications (Cont.) Digital I/O ( Port 17 ) • Eight-channel binary I/O port for contact closure • Each input is capable of voltage sensing. Input format is software selectable.
Introduction 5 NI-3101-SIG Signature Series NetLinx Inte grated Controller NI-3101-SIG Specifications (Cont.) Rear Panel Connectors (Cont.): AXlink LED • Green LED indicates the state of the AXlink connector port.
Introduction 6 NI-3101-SIG Signature Series NetL inx Integrated Controller.
Installation and Upgrading 7 NI-3101-SIG Signature Series NetLinx Inte grated Controller Installation and Upgrading Device:Port:System (D:P:S) A device is any hardware component that can be connected to an AXlink b us. Each device must be assigned a unique number to locate that device on the b us.
Installation and Upgrading 8 NI-3101-SIG Signature Series NetL inx Integrated Controller Installation into an Equipment Rack Use the rack-mounting ears supplied with the NI-310 1-SIG controller for equipment rack installations. The device comes installed with four rubber feet for flat surface installations.
Connections and Wiring 9 NI-3101-SIG Signature Series NetLinx Inte grated Controller Connections and Wiring Setting the Configuration DIP Switch for the Configuration Port Prior to installing the Controller , use the Conf igur ation DIP switch to set the information used by the Configuration Port for communication.
Connections and Wiring 10 NI-3101-SIG Signature Series NetL inx Integrated Controller Configuration Port Connections and Wiring The NI-3101 is equipped with a low-speed USB connection located on the rear of the unit. Use a standard USB cable to establish a connection between the device and your PC's USB port.
Connections and Wiring 11 NI-3101-SIG Signature Series NetLinx Inte grated Controller Port Assignments and Functionality The rear Port Assignments are as follows: AXlink Port and LED All NI units ha ve an AXlink port and adjacent status LED (FIG.
Connections and Wiring 12 NI-3101-SIG Signature Series NetL inx Integrated Controller Wiring Guidelines The Integrated Controllers use a 12 VDC-complian t power supply to provide po wer through the rear 2-pin 3.5 mm mini-Phoenix PWR connector, or through the 4-pin 3.
Connections and Wiring 13 NI-3101-SIG Signature Series NetLinx Inte grated Controller Wiring a power conn ection T o use the 2-pin 3.5 mm mini-Phoenix con nector with a 12 VDC-compliant power supply , the incoming PWR and GND cables from the external source must b e connected to their corresponding location s on the connector (FIG.
Connections and Wiring 14 NI-3101-SIG Signature Series NetL inx Integrated Controller Using the 4-pin mini-P hoenix connector for data with ex ternal power T o u se the 4-pin 3.
Connections and Wiring 15 NI-3101-SIG Signature Series NetLinx Inte grated Controller DB9 Device Port: Connections and Wiring FIG. 7 shows the connector pinouts for the rear RS-232/RS-422/RS-485 (DB9) Device Ports. These ports support most standard RS-232 communication prot ocols for data transmission.
Connections and Wiring 16 NI-3101-SIG Signature Series NetL inx Integrated Controller Relay connecti ons Use A for common and B for output (FIG. 8). Each relay is isolated and normally open. A metal connector strip is also provided to common multiple relays.
Connections and Wiring 17 NI-3101-SIG Signature Series NetLinx Inte grated Controller IR/Serial Port: Connections and Wiring Up to eight IR- or Serial-controllable d e vices may be conn ected to the IR/Serial connectors on the rear of the NI-3101 (FIG.
Connections and Wiring 18 NI-3101-SIG Signature Series NetL inx Integrated Controller Ethernet/RJ-45 Port: Connections and Wiring The following table lists the pinouts, signals, and pairing for the Ethe rnet connector . FIG. 11 diagrams the RJ-45 pinouts and signals for the Ethernet RJ-45 connector and cable.
Connections and Wiring 19 NI-3101-SIG Signature Series NetLinx Inte grated Controller Ethernet ports used by the Integrated Controllers Ethernet Ports Used by the Ne tLinx Integrated Controllers Port type Description Standard P or t # FTP The on-board Master has a built-in FTP server .
Connections and Wiring 20 NI-3101-SIG Signature Series NetL inx Integrated Controller Replacing the Timekeeper Battery The NI-3101-SIG uses a combination lithium battery and clock crystal packag e called a Timek eeper . Only one Ti m e k e e p e r unit is installed within a giv en NI-3101-SIG.
Configuration and Firmware Upd ate 21 NI-3101-SIG Signature Series NetLinx Inte grated Controller Configuration and Firmware Update This section refers to steps necessary to both communicate with and upgrade the NI-3101-SIG. Bef ore beginning: 1. Set up and configure the NI-3101-SIG.
Configuration and Firmware Updat e 22 NI-3101-SIG Signature Series NetL inx Integrated Controller Communicating with the Master via the Program Port 1. From your computer , launch NetLinx Studio 2.x. 2. Select Settings > Master Communication Settings , from the Main menu, to open the Master Communication Settings dialog bo x (FIG.
Configuration and Firmware Upd ate 23 NI-3101-SIG Signature Series NetLinx Inte grated Controller 7. Set the COM port parameters for the selected COM port used for communication to the NetLinx Master .
Configuration and Firmware Updat e 24 NI-3101-SIG Signature Series NetL inx Integrated Controller 2. Select the Change System selection box from the Syst em to Chang e section. 3. Enter both the current an d new system address v alues. 4. Click the Change Device/System Number button.
Configuration and Firmware Upd ate 25 NI-3101-SIG Signature Series NetLinx Inte grated Controller Changing the Device Address of a NetLinx Device 1. Access the Device Addressing dialog (FIG.
Configuration and Firmware Updat e 26 NI-3101-SIG Signature Series NetL inx Integrated Controller Recommended NetLi nx Device numbers Using the ID Button to Change the Controller’s Device Value 1. Access the Device Addressing dialog (FIG. 18) by selecting Diagnostics > De vice Addressing from the Main menu.
Configuration and Firmware Upd ate 27 NI-3101-SIG Signature Series NetLinx Inte grated Controller 4. Press the target NI de vice’ s ID button to begin process of reading the current de vice value of the NI Controller and then assigning it to the ne w value entered in step 2.
Configuration and Firmware Updat e 28 NI-3101-SIG Signature Series NetL inx Integrated Controller Obtaining the Master’s IP Address (using DHCP) 1. Select Diagnostics > Network Addr esses from the Main menu to access the Network Addresses dialog (FIG.
Configuration and Firmware Upd ate 29 NI-3101-SIG Signature Series NetLinx Inte grated Controller 10. Click Reboot from the T ools > Reboot the Master Controller dialog, and wait for the System Master to reboot and retain the ne wly obtained DHCP Address.
Configuration and Firmware Updat e 30 NI-3101-SIG Signature Series NetL inx Integrated Controller Assigning a Static IP to the NetLinx Master 1. Select Diagnostics > Network Addr esses from the Main menu to access the Network Addresses dialog (FIG.
Configuration and Firmware Upd ate 31 NI-3101-SIG Signature Series NetLinx Inte grated Controller 12. Complete the communica tion process by continuing on to the Communicating with the NI Device via an IP section on page 31.
Configuration and Firmware Updat e 32 NI-3101-SIG Signature Series NetL inx Integrated Controller 6. Click the Edit Settings button ( on the Communications Settings dialog ) to open the TCP/IP Settings dialog (FIG.
Configuration and Firmware Upd ate 33 NI-3101-SIG Signature Series NetLinx Inte grated Controller 12. Press the User Name and Password b utton to open the Master Controller User Name and Pa s s w o r d dialog box (FIG.
Configuration and Firmware Updat e 34 NI-3101-SIG Signature Series NetL inx Integrated Controller Verifying the current version of NetLinx Master Firmware All NI Controllers c ontain both an on-boa rd NI Master and an Integrated Controller .
Configuration and Firmware Upd ate 35 NI-3101-SIG Signature Series NetLinx Inte grated Controller Upgrading the On-board Master Firmware via an IP The on-board Master firmware Kit file is not the sa me as the Integrated Controller Kit file.
Configuration and Firmware Updat e 36 NI-3101-SIG Signature Series NetL inx Integrated Controller 7. From within Studio, select T ools > Firmware T ransfers > Send to NetLinx Device from the Main menu to open the Send to NetLinx De vice dialog (FIG.
Configuration and Firmware Upd ate 37 NI-3101-SIG Signature Series NetLinx Inte grated Controller 14. Press Done once until the Master Reboot Status field reads * Reboot of System Complete* . 15. Repeat steps 5 - 9 again (the last component will now successfully be installed).
Configuration and Firmware Updat e 38 NI-3101-SIG Signature Series NetL inx Integrated Controller 7. From within NetLinx Studio, select T ools > Firmware T ransfers > Se nd to NetLinx Device from the Main menu to open the Send to NetLinx Device dialog (FIG.
Configuration and Firmware Upd ate 39 NI-3101-SIG Signature Series NetLinx Inte grated Controller If the connection fails to establish, a Connection Failed dialog appears. T ry selecting a different IP Address if communication fails. Press the Retry button to reconnect using the same communication parameters.
Configuration and Firmware Updat e 40 NI-3101-SIG Signature Series NetL inx Integrated Controller.
NetLinx Security within the Web Server 41 NI-3101-SIG Signature Series NetLinx Inte grated Controller NetLinx Security within the Web Server NetLinx Masters incorporate built-in secur ity for HTTPS and T erm inal sessions ( enhanced with SSL and SSH r espectively ), ICSP data verification/encryption, and Server Port conf iguration.
NetLinx Security within the Web Server 42 NI-3101-SIG Signature Series NetL inx Integrated Controller The third layer of protection is an SSL Certificate (specif ically identif ying the target Master and using a unique ke y to encrypt data). SSL works by using a pri v at e ke y to encrypt data that's transferred ov er the SSL connection.
NetLinx Security within the Web Server 43 NI-3101-SIG Signature Series NetLinx Inte grated Controller Accessing an Unsecured Master via an HTTP Address Refer to the Upgrading the On-board Master F irm war e via an IP section on page 35 for more deta iled information on how to do wnload the latest firmw are from ww w .
NetLinx Security within the Web Server 44 NI-3101-SIG Signature Series NetL inx Integrated Controller Browser Application Frames A web page (FIG. 30) can be divided into separate s ections or frames, each of which can be independent of one another and display their own information.
NetLinx Security within the Web Server 45 NI-3101-SIG Signature Series NetLinx Inte grated Controller If a user is not currently logged-into the Master ( via the initial Login scr een ) and they attempt to access a feature wherein authentication is required, they are pr ompted with a message to log into the Master (via the Log In button) (FIG.
NetLinx Security within the Web Server 46 NI-3101-SIG Signature Series NetL inx Integrated Controller The administrator user account cannot be deleted or modified with the exception of its password. Only a user with both Conf iguration access and administrator rights can alter the administrator’ s password.
NetLinx Security within the Web Server 47 NI-3101-SIG Signature Series NetLinx Inte grated Controller Web Control This section of the Navig ation frame contains the Mange Connections feature which allows control of compatible devices communicat i ng with the target Master .
NetLinx Security within the Web Server 48 NI-3101-SIG Signature Series NetL inx Integrated Controller The following table lists the features av ailable to an administrator or other authorized user from the Manage W ebControl Connections page: Security Features This section of the Navigation frame (FIG.
NetLinx Security within the Web Server 49 NI-3101-SIG Signature Series NetLinx Inte grated Controller The follo wing table lists the NetLinx System Security options that can be granted or denied by an.
NetLinx Security within the Web Server 50 NI-3101-SIG Signature Series NetL inx Integrated Controller Requiring verif ication from a communicating AMX software (such as NetLinx Studio v 2.
NetLinx Security within the Web Server 51 NI-3101-SIG Signature Series NetLinx Inte grated Controller System Level Security Page (Cont.) F eature Description T elnet Access: This selection determines if a username and password is required for T elnet Access (see FIG .
NetLinx Security within the Web Server 52 NI-3101-SIG Signature Series NetL inx Integrated Controller The following graphic illustrates the Ports which can be enabled for the v alidation of rights by using a va lid username and password.
NetLinx Security within the Web Server 53 NI-3101-SIG Signature Series NetLinx Inte grated Controller 4. Click on the desired ac cess parameters and co nfi guration checkboxes necessary to require user va lidation prior to usage.
NetLinx Security within the Web Server 54 NI-3101-SIG Signature Series NetL inx Integrated Controller ICSP Authenticati on In a Master-to-Master system, the Master which accepts the IP conne ction initiates the authentication process.
NetLinx Security within the Web Server 55 NI-3101-SIG Signature Series NetLinx Inte grated Controller Configure Group Properties Page F eature Description Configure Group Properties: T his page allows an authorized user to configure the options for either a pre-existing or new group.
NetLinx Security within the Web Server 56 NI-3101-SIG Signature Series NetL inx Integrated Controller Adding a new Group 1. Click the Group Le vel link ( fr om within the Security section of the Navigation frame ) to open the Manage Groups page. 2. Click the New button to be transferred to the Configure Group Properties page (FIG.
NetLinx Security within the Web Server 57 NI-3101-SIG Signature Series NetLinx Inte grated Controller Deleting an existin g Group 1. Click the Group Le vel link ( fr om within the Security section of the Navigatio n frame ) to open the Manage Gr oups page.
NetLinx Security within the Web Server 58 NI-3101-SIG Signature Series NetL inx Integrated Controller Security - User Level Security page T o access the User Lev el Security page (FIG. 38), click on the User Level link ( fr om within the Security section of the Navigation frame ).
NetLinx Security within the Web Server 59 NI-3101-SIG Signature Series NetLinx Inte grated Controller Configure User Properties Page F eature Description Configure User Properties: This page allows an authorized user to configure the options for either a pre-existing or new user .
NetLinx Security within the Web Server 60 NI-3101-SIG Signature Series NetL inx Integrated Controller Adding a new User The information entered within this page can be used by Modero touch panels to verify and establish a secure connection by encrypting the data being transmitted between the Master and the panel.
NetLinx Security within the Web Server 61 NI-3101-SIG Signature Series NetLinx Inte grated Controller 9. Click the Back button to return to the Manage User page. Modifying the properties of an existing User 1. Click the User Level link ( fr om within the Security section of the Navigation frame ) to open the Manage Users page.
NetLinx Security within the Web Server 62 NI-3101-SIG Signature Series NetL inx Integrated Controller Deleting an ex isting User 1. Click on the User Level link ( fr om within the Security section of the Navigation frame ) to open the Manage Users page.
NetLinx Security within the Web Server 63 NI-3101-SIG Signature Series NetLinx Inte grated Controller System Settings - Manage System page T o view all of the available options within the right fr ame, it is r ecommended that you maximize the br owser wind ow .
NetLinx Security within the Web Server 64 NI-3101-SIG Signature Series NetL inx Integrated Controller FIG. 42 System - Online Tree frame Manage System Page Components (Cont.) F eature Description Management menu op tions: These management buttons change depending on the source chosen from the Online T ree.
NetLinx Security within the Web Server 65 NI-3101-SIG Signature Series NetLinx Inte grated Controller Manage System Page Components (Cont.) F eature Description Device menu buttons : The selected system number: device number are displayed below these menu buttons.
NetLinx Security within the Web Server 66 NI-3101-SIG Signature Series NetL inx Integrated Controller Manage System - System Menu Buttons These buttons appear (on the right) when a user clicks on the purple System icon from within the Online T ree. The selected system number is displayed below these System menu b uttons.
NetLinx Security within the Web Server 67 NI-3101-SIG Signature Series NetLinx Inte grated Controller System Menu - Chan ging the System Num ber 1. Click the Manage System link ( fr om within the System Settings section of the Navigation fr ame ).
NetLinx Security within the Web Server 68 NI-3101-SIG Signature Series NetL inx Integrated Controller 1. Click the Manage System link ( fr om within the System Settings section of the Navigation frame ). 2. Clicking on any of the Online T ree items opens menu item s with the Control/Emulate button option av ailable.
NetLinx Security within the Web Server 69 NI-3101-SIG Signature Series NetLinx Inte grated Controller The De vice, Port, and System value ranges are 1 - 65535 . 7. W ithin the Channel Code section, enter a valid Ch annel number to emulate Channel messages (i.
NetLinx Security within the Web Server 70 NI-3101-SIG Signature Series NetL inx Integrated Controller Manage System - Diagnosti cs This page allows an authorized user to setup a nd monitor diagnostic messa ges coming from and going to de vices av ailable on the Online Tree.
NetLinx Security within the Web Server 71 NI-3101-SIG Signature Series NetLinx Inte grated Controller Setting up and rem oving a Diag nostic Filter 1. Setup a diagnostic filter by scrolling down the page and clicking the Modify b utton below the f irst empty column.
NetLinx Security within the Web Server 72 NI-3101-SIG Signature Series NetL inx Integrated Controller Diagnostic Configuration Dialog (Cont.) F eature Description Preset s : This list of up to 10 presets comes defau lted with Preset 0: All Devices, All Notifications • Stor e : Save the current notification selections to a Pre set profile.
NetLinx Security within the Web Server 73 NI-3101-SIG Signature Series NetLinx Inte grated Controller 5. Remov e a diagnostic filter by clicking the Modif y button belo w it (from the Diagnostics dialog), then pressing the Remov e b utton to delete this filter from the Diagnostics dialog.
NetLinx Security within the Web Server 74 NI-3101-SIG Signature Series NetL inx Integrated Controller Setting the Master’s Port Configurations Manage System - Serv er This page allows a user to both.
NetLinx Security within the Web Server 75 NI-3101-SIG Signature Series NetLinx Inte grated Controller The following graphic illustrates the Ports which can be enabled for v alidation using a v alid username and password, as well as what me thod of communication is used with each.
NetLinx Security within the Web Server 76 NI-3101-SIG Signature Series NetL inx Integrated Controller Modifying the Server Port Settings 1. From within the Server submenu, press the Por t S e t ti n g s b utton to open the Server Port Settings dialog seen above in FIG.
NetLinx Security within the Web Server 77 NI-3101-SIG Signature Series NetLinx Inte grated Controller 4. Once an authorized user has modified an y of the server port settings, press the Update button to sav e these changes to the Master .
NetLinx Security within the Web Server 78 NI-3101-SIG Signature Series NetL inx Integrated Controller SSL Server Certificate Creation Procedures Initially , a NetLinx Master is not equipped with any installed certif icates.
NetLinx Security within the Web Server 79 NI-3101-SIG Signature Series NetLinx Inte grated Controller This page allows an authorized user to display an installed certif icate, create a certificate request, self- generate, and regenerate SSL Server Certif icates.
NetLinx Security within the Web Server 80 NI-3101-SIG Signature Series NetL inx Integrated Controller Server - Display SS L Server Certificat e Information 1. Navigate to the Server Certif icate page by clicking System Settings > Manage System > Server > Create SSL Certif icate to open the Server Certificate page.
NetLinx Security within the Web Server 81 NI-3101-SIG Signature Series NetLinx Inte grated Controller Server - Regeneratin g an SSL Server Certifica te Request 1. Navigate to the Serv er Certificate page by clicking System Settings > Manage System > Server > Create SSL Certif icate to open the Server Certificate page.
NetLinx Security within the Web Server 82 NI-3101-SIG Signature Series NetL inx Integrated Controller 4. Enter the name of the business or organization into the Or ganization Name field. This is an alpha- numeric string, 1 - 50 characters in length. 5.
NetLinx Security within the Web Server 83 NI-3101-SIG Signature Series NetLinx Inte grated Controller Common Steps for Requesting a Certificate from a CA Once the request has begun, a user has the c h.
NetLinx Security within the Web Server 84 NI-3101-SIG Signature Series NetL inx Integrated Controller Server - Exportin g an SSL Certificate Request 1.
NetLinx Security within the Web Server 85 NI-3101-SIG Signature Series NetLinx Inte grated Controller 11. Once the return ed CA certificate has been receiv ed, follow the procedures outlined in the following section to import the returned certificate ( over a secur e connection ) to the target Master .
NetLinx Security within the Web Server 86 NI-3101-SIG Signature Series NetL inx Integrated Controller 5. Use the Server > Cr eate SSL Certificate > Display Certificate option to confirm that the new certificate w as imported properl y to the target Master .
NetLinx Security within the Web Server 87 NI-3101-SIG Signature Series NetLinx Inte grated Controller 4. Enter a ne w or updated name within the Host Name field.
NetLinx Security within the Web Server 88 NI-3101-SIG Signature Series NetL inx Integrated Controller Device Menu - Deve loping a URL List 1. Click the System Settings > Manage System link from within the System Settings section of the Navigation frame.
NetLinx Security within the Web Server 89 NI-3101-SIG Signature Series NetLinx Inte grated Controller 10. Confirm that the ne wly added URLs appear within the URL List dialog (FIG. 54). If the ne wly added URL doesn’t appear on this page, click the Re fresh button.
NetLinx Security within the Web Server 90 NI-3101-SIG Signature Series NetL inx Integrated Controller 5. Click the Update button to sa ve this ne w value to the de vice. The following message; " Device number changed to XXX. De vice must be r ebooted for the change to tak e effect.
NetLinx Security within the Web Server 91 NI-3101-SIG Signature Series NetLinx Inte grated Controller System Settings - Manage License This page (FIG. 57) displays both the currently used license keys and the pending keys. The New button allo ws for the addition of new license k eys associated with currently used modules/products.
NetLinx Security within the Web Server 92 NI-3101-SIG Signature Series NetL inx Integrated Controller 4. Contact the AMX Sales department with both th e product serial number (or certificate number) a.
NetLinx Security within the Web Server 93 NI-3101-SIG Signature Series NetLinx Inte grated Controller System Settings - Manage NetLinx Devices T o access this page, click on the Manage NetLinx Devices link ( fr om within the System Settings section of the Navigation frame ).
NetLinx Security within the Web Server 94 NI-3101-SIG Signature Series NetL inx Integrated Controller Manage NetLinx Devices Page (Cont .) F eature Description Device Listings: • This page ( in addi.
NetLinx Security within the Web Server 95 NI-3101-SIG Signature Series NetLinx Inte grated Controller Manage NetLinx Devi ces - Disp laying NDP-capable devices Note that in the pre vious example (FIG .
NetLinx Security within the Web Server 96 NI-3101-SIG Signature Series NetL inx Integrated Controller Manage NetLinx Devic es - Obtaining NetLinx Devi ce information T o obtain more description than is provided by the listing: 1. Hover the cursor ov er a particular device within the listing to display a m ouse-over popup dialog (FIG.
NetLinx Security within the Web Server 97 NI-3101-SIG Signature Series NetLinx Inte grated Controller System Settings - Manage Other Devices - Dynamic Device Discovery Pages T o acce ss this page, click on the Manage Other Devices link ( fr om within the System Settings section of the Navigation frame ).
NetLinx Security within the Web Server 98 NI-3101-SIG Signature Series NetL inx Integrated Controller Manage Other Devices Page F eature Description Dynamic Device Discovery links: These links direct .
NetLinx Security within the Web Server 99 NI-3101-SIG Signature Series NetLinx Inte grated Controller Manage Other Devices Page (Cont.) F eature Description Configure Binding Opt ions (Cont.
NetLinx Security within the Web Server 100 NI-3101-SIG Signature Series NetL inx Integrated Controller Manage Other Devices Page (Cont.) F eature Description Delete Selected • Clicking this button deletes a selected module from the /unbound directory .
NetLinx Security within the Web Server 101 NI-3101-SIG Signature Series NetLinx Inte grated Controller What is Dynamic Device Discov ery? The Dynamic Device Detector (DDD) monitors the system for newly connected devices.
NetLinx Security within the Web Server 102 NI-3101-SIG Signature Series NetL inx Integrated Controller What is the difference between Pr ogram and Run-time defined binding? In DDD, the device discov ery activity is always dynamic because the devices will alw ays be detected at run-time.
NetLinx Security within the Web Server 103 NI-3101-SIG Signature Series NetLinx Inte grated Controller Configuring application-defined devices Elements such as DUET_DEV_TYPE_DISC_DEVICE and DUET_DEV_POLLED are def ined within the NetLinx axi. The latest version of the NetLinx.
NetLinx Security within the Web Server 104 NI-3101-SIG Signature Series NetL inx Integrated Controller Dynamic application devices specify both the Duet virtual device and its associated Device SDK with no association to a physical port.
NetLinx Security within the Web Server 105 NI-3101-SIG Signature Series NetLinx Inte grated Controller its associated property information is then displayed in a mouse-over popup dialog when the cursor hov ers over the physical device ID.
NetLinx Security within the Web Server 106 NI-3101-SIG Signature Series NetL inx Integrated Controller Manage Other Devi ces Menu - Viewing Discov ered Devices This page (FIG. 68) provides a listing with all of the dynamic devices that ha ve been disco vered in the system.
NetLinx Security within the Web Server 107 NI-3101-SIG Signature Series NetLinx Inte grated Controller Once a list of all compatible modules is compiled, the Select Device Module page (FIG. 69) is then displayed with a listing of each module along with its calculated “match” value.
NetLinx Security within the Web Server 108 NI-3101-SIG Signature Series NetL inx Integrated Controller Manage Other Devi ces Menu - Creating a new User-Defined Device This page provides the ability to both add and remov e any user -defined devices.
NetLinx Security within the Web Server 109 NI-3101-SIG Signature Series NetLinx Inte grated Controller 6. Enter the name of the manufacturer for the device being used (up to 55 alpha-numeric characters) (ex: Son y , ONKYO, etc.) into the Make field. Either the GUID or Mak e/Model must be specified within this field .
NetLinx Security within the Web Server 110 NI-3101-SIG Signature Series NetL inx Integrated Controller 3. T o c onfigure a Dynamic application interface: Add the D Y N AMIC_APPLICA TION_DEVICE AP I call to the section of the NetLinx program (FIG.
NetLinx Security within the Web Server 111 NI-3101-SIG Signature Series NetLinx Inte grated Controller The installer can then select which module to use with that discovered de vice by selecting the corresponding radio box and then clicking the upper-left Save b utton.
NetLinx Security within the Web Server 112 NI-3101-SIG Signature Series NetL inx Integrated Controller 4. The user is then presented with a Security Alert popup window and Certif icate information (FIG.
NetLinx Security within the Web Server 113 NI-3101-SIG Signature Series NetLinx Inte grated Controller 7. The user is then presented with a Certificate Import W izard that begins the process of adding the certificate (FIG. 72). 8. Click Next to proceed with the certif icate importation process.
NetLinx Security within the Web Server 114 NI-3101-SIG Signature Series NetL inx Integrated Controller Using your NetLinx Maste r to control the G4 panel Refer to the specific panel instruction manu al for detailed information on configuring and enabling W ebCon trol.
NetLinx Security within the Web Server 115 NI-3101-SIG Signature Series NetLinx Inte grated Controller 7. This Manage W ebControl Connections pa ge (FIG. 74) is accessed by clicking on the Manage connections link ( within the W eb Control section within the Navigation frame ).
NetLinx Security within the Web Server 116 NI-3101-SIG Signature Series NetL inx Integrated Controller 10. Some circumstances might open a Connection Details dialog (FIG. 76) requesting a VNC Server IP Address. This is not the IP of the Master but of the target touch panel.
NetLinx Security with a Terminal Connection 117 NI-3101-SIG Signature Series NetLinx In tegrated Controller NetLinx Security with a Terminal Connection NetLinx Masters currently hav e built-in security capabilities. They require a user entering a valid username and password to access the NetLinx System’ s T e lnet, HTTP , ICSP , and FTP services.
NetLinx Security with a Terminal Connection 118 NI-3101-SIG Signature Series NetL inx Integrated Controller Initial Setup via a Terminal Connection Security administration and configuration is done via a T erminal communication through the RS232/ USB Configuration Port on the NetLinx Master .
NetLinx Security with a Terminal Connection 119 NI-3101-SIG Signature Series NetLinx In tegrated Controller 2. T ype setup security to access the Main Security Menu, shown belo w: >setup security -.
NetLinx Security with a Terminal Connection 120 NI-3101-SIG Signature Series NetL inx Integrated Controller If you answer y for yes, sec urity will be enabled and you will be taken to the Security Options Menu.
NetLinx Security with a Terminal Connection 121 NI-3101-SIG Signature Series NetLinx In tegrated Controller The items in the Security Options Menu are described belo w: Option 2 - Display system secu .
NetLinx Security with a Terminal Connection 122 NI-3101-SIG Signature Series NetL inx Integrated Controller 2. At the Enter username prompt, enter a new username (for example " techpubs "). A username is a valid character string (4 - 20 alpha-numeric characters) defining the user .
NetLinx Security with a Terminal Connection 123 NI-3101-SIG Signature Series NetLinx In tegrated Controller Access Rights Menu The Access Rights Menu is accessed whenever you select Change Access Rights (option 6 ) from the Edit User Menu, or Change Access Rights from the Edit Group Menu.
NetLinx Security with a Terminal Connection 124 NI-3101-SIG Signature Series NetL inx Integrated Controller Press <Enter> to e xit the menu and return to the previous menu. The Access Rights Menu is described in the following table: Option 5 - Delete user 1.
NetLinx Security with a Terminal Connection 125 NI-3101-SIG Signature Series NetLinx In tegrated Controller Option 6 - Show the l ist of authorized users 1. T ype 6 and <Enter> at the Security Setup prompt (at the bottom of the Main Security Menu) to vie w a list of currently enrolled users.
NetLinx Security with a Terminal Connection 126 NI-3101-SIG Signature Series NetL inx Integrated Controller A single '/' is suff icient to grant access to all file s and directories in the user directory and it's sub- directory . The '*' wildcard can also be added to enable access to all files.
NetLinx Security with a Terminal Connection 127 NI-3101-SIG Signature Series NetLinx In tegrated Controller Edit Group men u: Change Access Rights 1. At the Edit Group prompt, type 4 to c hange the current access rights for the selected group account.
NetLinx Security with a Terminal Connection 128 NI-3101-SIG Signature Series NetL inx Integrated Controller 2. Select a group from the list of curre ntly enrolled groups and press <Enter> to open the Edit Group Menu.
NetLinx Security with a Terminal Connection 129 NI-3101-SIG Signature Series NetLinx In tegrated Controller Option 12 - Display Telnet T imeout in seco nds This featur e is disabled after the installation of firmwar e build 130 or higher onto your tar get Master .
NetLinx Security with a Terminal Connection 130 NI-3101-SIG Signature Series NetL inx Integrated Controller Main Security Menu The Main Security menu is described belo w: Main Security Menu Command De.
NetLinx Security with a Terminal Connection 131 NI-3101-SIG Signature Series NetLinx In tegrated Controller Default Security Configuration By default, the NetLinx Master will create the follo wing accounts, access rights, directory associations, and security options.
NetLinx Security with a Terminal Connection 132 NI-3101-SIG Signature Series NetL inx Integrated Controller The FTP Security and Admin Change Password Security are always enabled and cannot be disabled.
NetLinx Security with a Terminal Connection 133 NI-3101-SIG Signature Series NetLinx In tegrated Controller Help Menu Options (Cont.) Command Description SEND_COMMAND D:P:S or NAME,COMMAND Sends the specified command to the device. T he Command uses NetLinx string syntax.
NetLinx Security with a Terminal Connection 134 NI-3101-SIG Signature Series NetL inx Integrated Controller Logging Into a Session Until T elnet security is enabled, a session will begin with a welcome banner . Welcome to NetLinx v3.01.320 Copyright AMX Corp.
NetLinx Security with a Terminal Connection 135 NI-3101-SIG Signature Series NetLinx In tegrated Controller Logout The logout command will log the user out of the current s ecure telnet session. For a T erminal session, the user will be logged out and to access T erminal co mmands again the user will first ha ve to login.
NetLinx Security with a Terminal Connection 136 NI-3101-SIG Signature Series NetL inx Integrated Controller.
Programming 137 NI-3101-SIG Signature Series NetLinx Inte grated Controller Programming This section describes the Se nd_Commands, Send_Strings, and Channel commands you can use to program the Integrated Controller . The examples in this section require a declaration in the DEFINE_DEVICE section of your program to work correctly .
Programming 138 NI-3101-SIG Signature Series NetL inx Integrated Controller Master Send_Co mmands (Cont.) Command Description G4WC Add G4 Web Control devices to Web control list displayed by the Web server in a browser .
Programming 139 NI-3101-SIG Signature Series NetLinx Inte grated Controller Master IP Local Port Send_Commands These commands are specific to the Master and not the Controller . These commands are sent to the DPS 0:1:0 (the Master). A de vice must first be def ined in the NetLinx programming language with v alues for the De vice: Port: System.
Programming 140 NI-3101-SIG Signature Series NetL inx Integrated Controller Device:Port:System (D :P:S) A device is any hardware component that can be connected to an AXlink or ICSNet b us. Each de vice must be assigned a unique number to locate that device on the bus.
Programming 141 NI-3101-SIG Signature Series NetLinx Inte grated Controller In your terminal program, type "Help" or a question mark ("?") and <Enter> to display the Configuration Port commands listed in the following table. Configuration Port Commands Command Description DATE Displays the current date and day of the week.
Programming 142 NI-3101-SIG Signature Series NetL inx Integrated Controller Configuration Port Commands ( Cont.) Command Description GET DUET MEMORY Display the amount of memory allocated for Duet Java pool. This is the current Java memory heap size as measur ed in Megabytes.
Programming 143 NI-3101-SIG Signature Series NetLinx Inte grated Controller Configuration Port Commands ( Cont.) Command Description OFF <D:P:S, or NAME, CHAN> T urns off a channel on a device. The device can be on any system the Master you are connected to can reach.
Programming 144 NI-3101-SIG Signature Series NetL inx Integrated Controller Configuration Port Commands ( Cont.) Command Description PULSE <D:P:S, or NAME, CHAN> Pulses a channel on a device on and off. The device can be on any system the Master you are connected to can reach.
Programming 145 NI-3101-SIG Signature Series NetLinx Inte grated Controller Configuration Port Commands ( Cont.) Command Description SET DATE Prompts you to enter the new date for the Master . When the date is set on the Master , the new date will be reflected on all devices in the system that have clo cks (i.
Programming 146 NI-3101-SIG Signature Series NetL inx Integrated Controller Configuration Port Commands ( Cont.) Command Description SET HTTP PORT Sets the IP port listened to for HTTP connections.
Programming 147 NI-3101-SIG Signature Series NetLinx Inte grated Controller Configuration Port Commands ( Cont.) Command Description SET LOG COUNT Sets the number of entries allowed in the message log.
Programming 148 NI-3101-SIG Signature Series NetL inx Integrated Controller Configuration Port Commands ( Cont.) Command Description SET THRESHOLD Sets the Master's internal message thresholds. Example: >SET THRESHOLD -- This will set the thresh olds of when particular tasks are pended.
Programming 149 NI-3101-SIG Signature Series NetLinx Inte grated Controller Configuration Port Commands ( Cont.) Command Description SHOW BUFFERS Displays a list of various message queues and the numb.
Programming 150 NI-3101-SIG Signature Series NetL inx Integrated Controller Configuration Port Commands ( Cont.) Command Description SHOW LOG Displays the log of messages stored in the Master's memory . The Master logs all internal messages and keeps the most recent messages.
Programming 151 NI-3101-SIG Signature Series NetLinx Inte grated Controller Configuration Port Commands ( Cont.) Command Description SHOW MAX BUFFERS Displays a list of various message queues and the maximum number of message buffers that were ever present on the queue.
Programming 152 NI-3101-SIG Signature Series NetL inx Integrated Controller Configuration Port Commands ( Cont.) Command Description SHOW SYSTEM Provides a list of all devices in all systems currently on-line. T he systems lists are either directly connected to this Master (i.
Programming 153 NI-3101-SIG Signature Series NetLinx Inte grated Controller ESC Pass Codes There are 'escape' codes in the pass mode. These codes can switch the display mode or exit pass mode. The following 'escape' codes are defined.
Programming 154 NI-3101-SIG Signature Series NetL inx Integrated Controller LED Disable/Enable Send_Commands The following commands enable or disable the LEDs on the Inte grated Controller . In these examples: <DEV> = Port 1 of the device. Sending to port 1 of the NI-Con troller (affects all ports).
Programming 155 NI-3101-SIG Signature Series NetLinx Inte grated Controller RS-232/422/485 Send_Commands In these examples: <DEV> = device. RS-232/422/485 Send_Commands Command Description B9MOFF Set the port's communication parameters for stop and data bits according to the sof tware settings on the RS-232 port (default).
Programming 156 NI-3101-SIG Signature Series NetL inx Integrated Controller RS-232/422/485 Send_C ommands (Cont.) Command Description GET BAUD Get the RS-232/422/485 port’s current communication par am ete rs . The port sends the parameters to the device that requested the information.
Programming 157 NI-3101-SIG Signature Series NetLinx Inte grated Controller RS-232/422/485 Send_C ommands (Cont.) Command Description SET BAUD Set the RS-232/422/485 port's communication par am ete rs .
Programming 158 NI-3101-SIG Signature Series NetL inx Integrated Controller RS-232/422/485 Send_String Escape Sequences This device also has some spec ial SEND_STRING escape sequences: If any of the 3.
Programming 159 NI-3101-SIG Signature Series NetLinx Inte grated Controller IR / Serial Ports Channels RS-232/422/485 Send _String Escape Sequences (Cont.) Command Description 27,20,1 Set the RTS hardware handshake's output to low/inactive (< 3V).
Programming 160 NI-3101-SIG Signature Series NetL inx Integrated Controller IR/Serial Send_Commands The following IR and IR/Serial Send_Commands generate control signals for external equipment.
Programming 161 NI-3101-SIG Signature Series NetLinx Inte grated Controller IR/Serial Send_Commands (Cont.) Command Description CTOF Set the duration of the Off time (no signal) between IR pulses for channel and IR function transmissions. Off time settings are stored in non-volatile memory .
Programming 162 NI-3101-SIG Signature Series NetL inx Integrated Controller IR/Serial Send_Commands (Cont.) Command Description POD Disable previously active 'PON' (power on) or 'POF' (power off) command settings. Channel 255 changes are enabled.
Programming 163 NI-3101-SIG Signature Series NetLinx Inte grated Controller IR/Serial Send_Commands (Cont.) Command Description PTOF Set the time duration between power pulses in .10-second increments. This time increment is stored in permanent memor y .
Programming 164 NI-3101-SIG Signature Series NetL inx Integrated Controller IR/Serial Send_Commands (Cont.) Command Description SET MODE Set the IR/Serial ports for IR or Serial-controlled devices connected to a CardFrame or NetModule. Sets an IR port to either IR, Serial, or Data mode.
Programming 165 NI-3101-SIG Signature Series NetLinx Inte grated Controller IR/Serial Send_Commands (Cont.) Command Description XCHM Changes the IR output pat- tern for the 'XCH' send command. Syntax: SEND_COMMAND <DEV>,"'XCHM <extended channel mode>'" Va r i a b l e : extended channel mode = 0 - 4.
Programming 166 NI-3101-SIG Signature Series NetL inx Integrated Controller Input/Output Send_Commands The following Send_Commands program the I/O ports on the Integrated Controller . In these examples: <DEV> = device. I/O ports: Port 17. Channels: 1 - 8 I/O channels.
Troubleshooting 167 NI-3101-SIG Signature Series NetLinx In tegrated Controller Troubleshooting This section describes the solutions to possible ha rdware/f irmware issues that could arise during the common operation of a NetLinx device. Troubleshooting Information Symptom Solution My NI Controller can’t obtain a DHCP Address.
Troubleshooting 168 NI-3101-SIG Signature Series NetL inx Integrated Controller Troubleshooting Information (Cont.) Symptom Solution I can’t connect to my NI Controller via the rear Configuration Port using a USB cable. A USB cable is used for Serial communication between the PC and the Master .
Troubleshooting 169 NI-3101-SIG Signature Series NetLinx Integr ated Controller.
4/08 © 2007 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifica tio ns withou t notice at any time. It’s Your World - Take Con trol™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il AMX NI-3101-SIG è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del AMX NI-3101-SIG - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso AMX NI-3101-SIG imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul AMX NI-3101-SIG ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il AMX NI-3101-SIG, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del AMX NI-3101-SIG.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il AMX NI-3101-SIG. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo AMX NI-3101-SIG insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
