Manuale d’uso / di manutenzione del prodotto HDTV Encoder DM-JV600U del fabbricante JVC
Vai alla pagina of 28
DM-JV600U INSTRUCTIONS HDTV ENCODER For Customer Use: Enter below the Serial No. which is located on the rear of cabinet. Retain this information for future reference. Model No. DM-JV600U Serial No. Thank you for purchasing this JVC product. Before operating this unit, please read the instructions carefully to ensure the best possible performance.
2 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
3 SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ATTENTION RISQUE D’ELECTROCUTION NE PAS OUVRIR ATTENTION: POUR EVITER TOUT RISQUE D’ELECTROCUTION NE PAS OUVRIR LE BOITER.
4 Encoded to MPEG-2(ISO/IEC13818-2) Input SMPTE292M(1080i/720p) standard HDTV digital se- rial video signal, encode it to MPEG-2(ISO/IEC13818-2) and output as DVB-ASI TS(Transport Stream).
5 Introduction Preparation Menu setting Basic operation Main Features ...................................... 4 Table of Contents ................................. 5 Precautions .......................................... 6 Front Panel .................
6 Maintenance and operating environment Do not store or use this equipment in the following envi- ronments. This will cause malfunctioning and damage. • Locations beyond the allowable operating temperature range of 5 °C and 40 °C. • Locations beyond the allowable operating humidity level of 30 % and 80 %.
7 Names and Functions 1 [POWER] Power switch Switch to turn on/off power. After this is switched to ON, a “Now Initializing” will be displayed on the Display 5 of front panel before normal screen is displayed. After turning on the power, it may take 2 sec- onds before display light up.
8 8 [AC IN] Power input terminal Use the power cord supplied to connect to an AC 120 V 50 Hz/60 Hz outlet. 9 [HD-SDI IN] Video signal input terminal (BNC) Input terminal for HD serial digital video signal. This terminal also receives audio signal when audio signal is embedded into HD serial digital video signal.
9 Preparation One example of the basic systems using this unit is described below. Turn OFF the power of all devices before connecting or disconnecting.
10 Foot EIA Rack F ront P anel P O W E R O N O F F P O W E R O N O F F Do not remov e the mounting brack et.The mounting may become unstab le due to loosen screws . In addition, if the mounting direction of the brack et is wrong, it will be e xtremely dangerous as the br ack et will not be properly mounted onto the rack.
11 The menu of this unit consists of 3 level of menus namely “Main menu”, “Sub menu” and “Setting items”. Menu setting Display screen HDTV ENCODER DM-JV600U Main Menu + Configuration Menu .
12 : Default setting Item Setting value Content Operate Param Menu Video Rate Asp 3-2Pulldown Audio Mode Audio Rate Start Stop 9000kbps to 20000kbps to 40000kbps When the Video Mode item i.
13 Item Setting value Content Initial Param Menu Control Mode Start Mode Sync Mode TS Rate Video Mode Audio Format Audio Input Audio ExDelay Audio Enable Local Remote Auto Manual HD-IN REF.
14 Configuration Menu (continued) Item Setting value Content Initial Param Menu PSI Enable P A T TS ID PMT PID PCR PID Video PID Audio PID Video Str eam ID ON OFF 0001 to 0001 to FFFF 0010 to .
15 Configuration Menu (continued) C0 to C0 to DF OFF ON Org Copy OFF ON Org Copy Set the ID of Audio PES stream. Set the copyright flag of Video PES. OFF : Set the copyright flag of Video PES to OFF. ON : Set the copyright flag of Video PES to ON.
16 The various features of this unit can be set using the menu. The setting value, which is stored in the internal memory will reappear upon turning on the power. Example Remote control of this unit can be achieved by using the RS-232C terminal on the rear panel.
17 Basic operation Operation Flow Chart Display Flow Chart Do not turn off the power switch during “Now Initializing” dis- play. Each feature that has been set using the menu can be returned to default (factory setting). All the menu settings return to default.
18 There are 2 ways to start the encoding. One is to start the encoding automatically and the other one is to start it manually by setting the menu. Operation Flow Chart Display Flow Chart The default setting of the Start Mode item is set to “Auto” in order to start the encoding automatically.
19 Basic operation Operation Flow Chart Display Flow Chart Set the Start Mode item in the menu to “Manual” ac- cording to the procedure on ☞ Page 18 “Start the encoding automati- cally”.
20 The operation status of this unit can be confirmed from the display. Operation Flow Chart Display Flow Chart Indicate that the encoding is in process.
21 Basic operation Operation Flow Chart Display Flow Chart The error occurrence can be confirmed on the display. Up to 64 occurrences can be stored. Main Menu +Configuration Menu Main Menu +Status Men.
22 The information regarding built-in program or firmware version can be obtained from the Administration Menu. In addition, clock setting and the display brightness could be adjusted.
23 Basic operation Item Content Model SerNo Time FL Brghtness (Initial Setting: 0) Firm Ucode Boot MISC FPGA STC FPGA I/O PWB I/O VI PLD I/O AU PLD Displays the model name.
24 The stored error log can be displayed by performing the operation on page 21 “Checking Error Log”. The error content is displayed by error code.
25 Others Error code:Error content 0002: parameter error 0008: FAN stop error 0009: FAN stop error recover 001a: FAN stop timeout error 0013: hardware fatal error 0014: software fatal error 0015: syst.
26 It is required to convert the video signal (Pulldown) in order to view the image recorded with 24 frames per second such as movie film on a system for HDTV video signal that is 30 frames per second (60 field) used in TV broadcasting.
27 Video input HD SDI IN × 1 Audio input AES/EBU IN × 1 Synchronized input REF IN × 1 Video output MONITOR OUT × 1 ASI OUT × 2 Dolby™ Digital(AC-3) Pass Through Interface .
DM-JV600U HDTV ENCODER VICTOR COMPANY OF JAPAN, LIMITED is a registered trademark owned b y VICTOR COMP ANY OF JAP AN, L TD . is a registered trademark in Japan, the U .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC HDTV Encoder DM-JV600U è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC HDTV Encoder DM-JV600U - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC HDTV Encoder DM-JV600U imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC HDTV Encoder DM-JV600U ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC HDTV Encoder DM-JV600U, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC HDTV Encoder DM-JV600U.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC HDTV Encoder DM-JV600U. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC HDTV Encoder DM-JV600U insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
