Manuale d’uso / di manutenzione del prodotto AVS-MD4-CP10 del fabbricante AMX
Vai alla pagina of 22
Instruction Manual AutoPatch Control Panel CP-10 Control Panel Release: 1/20/2009.
Contents i CP-10 Instruction Manual Contents Introduction ......................................................................................................... 1 Applicability Notice .............. ................... .................... ........
Contents ii CP-10 Instruction Manual.
Introduction 1 CP-10 Instruction Manual Introduction Applicability Notice The information in this manual applies to the CP-10 Control Panel, which comes with many of the Modula pre-engineered systems or can be ordered as part of a custom system or as a remote control panel.
Introduction 2 CP-10 Instruction Manual Control Keys Note: The following keys are not currently implemen ted: Special, Undo, Comma, Period, and Up and Down Arrows. Keys & Functions Cancel Key – cancels an incomplete command and returns the pane l to the Command screen.
Executing Switches 3 CP-10 Instruction Manual Executing Switches A switch is an active c onnection between an input (source) dev ice and one or more output (destination) devices. The signals routed in a switching operation are individual signals or groups of individual signals coming through the connectors on the rear of an enclosure.
Executing Switches 4 CP-10 Instruction Manual The example following switches Input 1 to Output 2 on Level 0. To execute a switch: 1. At the Command screen, press the Change Key . The Change screen appears. 2. At the Change screen, press the Level Key and enter “0.
Verifying Signal Status 5 CP-10 Instruction Manual Verifying Signal Status Signal status can be verified to confirm that a switch has executed properly or to confirm correct routing to multiple outputs (destinations) without accidently executing or disconnecting switche s.
Verifying Signal Status 6 CP-10 Instruction Manual No outputs – If no outputs are routed to the specific input, “DIS” (disconnect) displays in the Output field. The Status screen below indicates that Input 2 is not routed to any outputs. 5. Press the Status Key to return to the Status screen and select another signal to verify .
Executing Presets 7 CP-10 Instruction Manual Executing Presets Global & Local Presets Overview Global and local presets are predefined sets of switches that can easily be executed. Local Presets A local preset is a predetermined set of switches on a particular level (virtual matrix) that are routed simultaneously .
Executing Presets 8 CP-10 Instruction Manual Executing Local Presets Note: Executing a local preset does not change a ny system routings that are not part of the preset. Make sure the CP-10 is o n the level (virtual matrix) where the lo cal preset resides.
Executing Presets 9 CP-10 Instruction Manual Defining Global Presets T o return to the Command screen at any time, press the Cancel Key . The example below defines Global Preset 3, and the example on page 10 executes Global Preset 3. To define a global preset: 1.
Executing Presets 10 CP-10 Instruction Manual Executing Global Presets T o return to the Command screen at any time, press the Cancel Key . Note: When you execute a global preset, the syst em routes the switches immediately . To execute a global prese t: 1.
Checking the Software Version 11 CP-10 Instruction Manual Checking the Software Version Use the following steps to check the software version of the CP-10 Control Panel. To check the software version: 1. Press the Cancel K ey . 2. At the Command screen press the Program Key .
Installing a CP-10 Remote Control Panel 12 CP-10 Instruction Manual Installing a CP-10 Remote Control Panel This chapter covers rack installation for the CP-10 Remote Panel (FG1090-216), as well as instructions for linking the panel to a n enclosure.
Installing a CP-10 Remote Control Panel 13 CP-10 Instruction Manual Connecting to AMX Auto Patch Matrix Switcher Communication Cable Requ irements T wo-conductor, 20 A WG , 7/28 strand cable with a drain wire or shield, such as Alpha 2412C (customer supplied) Maximum length of cable: 1,000 ft.
Installing a CP-10 Remote Control Panel 14 CP-10 Instruction Manual Applying Power Power Requirements AMX AutoPatch wall transformer Or +7 VDC to +12 VDC @ 500 mA Important: Always use a UL approved power source. Be sure to check the power source documentation for information specific to that power source.
Installing a CP-10 Remote Control Panel 15 CP-10 Instruction Manual Rack Installation CP-10 Remote Panels are designed to fit in a standard EIA 19 in. (48.26 c m) rack. Once the CP-10 Remote is wired, follow the rack installation instructions below . Tip : When placing control panels, keep in mind that the optimal viewing angle is at eye level.
Installing a CP-10 Remote Control Panel 16 CP-10 Instruction Manual 2. Press the Level Key and enter “0.” 3. Press the Input Key and enter “1.” 4. Press the Output Key and en ter “2.” 5. Press the T ake Key . Input 1 is routed to Output 2, and the system returns to the Command screen.
Appendix A – System Error Codes 17 CP-10 Instruction Manual Appendix A – System Error Codes This appendix contains an overview of common error codes that can appear on a CP-10 Control Panel, provides basic troubleshooting strategies, and gives technical support contact information.
Appendix A – System Error Codes 18 CP-10 Instruction Manual Troubleshooting Error codes can appear eithe r on the control panel or in a terminal emulation program, such as HyperT erminal. When you are using a control panel, one of the most common troubleshoo ting strategies is to resend the command to see if the error was simply a timeout error .
1/09 2009 AMX © . All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the r igh t to alter specifications w ithout notice at a ny time. It’s Your World - Take Con trol™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il AMX AVS-MD4-CP10 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del AMX AVS-MD4-CP10 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso AMX AVS-MD4-CP10 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul AMX AVS-MD4-CP10 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il AMX AVS-MD4-CP10, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del AMX AVS-MD4-CP10.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il AMX AVS-MD4-CP10. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo AMX AVS-MD4-CP10 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
