Manuale d’uso / di manutenzione del prodotto JiMS-60 del fabbricante Jensen
Vai alla pagina of 16
® DOCKING MUSIC SYSTEM FOR iPOD OWNER’S MANUAL JiMS-60 (iPod Not Included) PLEASE READ THIS OPERATING MANUALCOMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOK LET FOR FUTURE REFERENCE .
1 DEAR JENSEN® CUSTOMER Selecting fine audio equipm ent such as the unit you've just purchased is only the start of your musical enjoym ent. Now it's time to consider how you can maximize the fun and excite ment your equipment offers.
2 WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WIT H AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSE RTED TO PREVENT BL ADE EXPOSURE. T O PREVENT FIRE OR S HOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
3 unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is da.
4 COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not caus e harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
5 POWER SOURCE This unit is designed to operate on normal household AC power rated at 120V/60Hz. Operating this unit from any other power source may cause damage to the unit, and such damage is not covered by your warranty .
6 LOCATION OF CONTROLS AND INDICATORS 1. AC POWER CORD 12. DOCK FOR iPod 2. DIMMER SWITCH 13. iPod PLAY/PAUSE BUTTON 3. WAKE UP SOURCE SELECTOR 14. FUNCTION SELECTOR 4. iPod SKIP BACKWARD ; HOUR BUTTON 15. iPod SKIP FORWARD ; MINUTE BUTTON 5. VOLUME CONTROL KNOB 16.
7 11. FM ANTENNA 22. SLEEP INDICATOR CLOCK SETTINGS When you plug the radio to an AC outlet for the first time the clock display will begin flashing "12:00". The flashing will stop when you set the time. 1. In standby mode, press and hold the TIME SET button and repeatedly press the HOUR button to set the correct Hour.
8 iPod OPERATION 1.) Use the iPod adapter included with your iPod and insert it into the docking area. Your iPod can now be docked by placing the connector on the bottom of the iPod onto t he connector in the docking bay. Note: Please be careful when docking the iPod onto the 30-pin connector in the docking bay.
9 CHECKING THE WAKE UP TIME Whenever you want to check the wake up time, simply press and hold the ALARM SET button. The display will change from current time to wake up time.
10 3. To stop the alarm, press the ALARM SET button. The alarm will stop but the alarm remains set and will turn on the unit again at the same time on the following day. 4. If you do not want the alarm on the following day, set the WAKE UP SOURCE selector to the “ALARM OFF” position.
11 AUXILIARY INPUT This unit provides an auxiliary audio signal input for c onnecting external audio devices such as an MP3 player or TV. Use an audio cable with 3.5 mm stereo plug (not included) to connec t the external device to the AUX IN Jack located on the back of the unit.
12 1. Do not subject the unit to excessi ve force, shock, dust or extreme temperature. 2. Do not tamper the inte rnal components of the unit. 3. Clean your unit with a dry cloth. Solvent or detergent should never be used. 4. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
13 iPod is not installed properly. Remove your iPod from the dock and check for obstruction on the connectors in the dock and on your iPod. Then reseat it in the dock. iPod is locked up/ frozen. iPod battery has problem. Please make sure your iP od is working properly before docking into the unit.
14 Apple is not responsible for the operation of this devise or its compliance with safety and regulatory standards. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A ONLY SPECTRA MERCHANDISING INTERNA TIONAL, INC.
15 It is recommended that you c ontact SPECTRA first at 1-800-7 77-5331 or by email at custserv @spectrai ntl.com for updated in formation on the unit requiring service. In some cases the model you have may be discontinued, and SPEC TRA reserves the right to offer alternative options for repair or replacem ent.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Jensen JiMS-60 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Jensen JiMS-60 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Jensen JiMS-60 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Jensen JiMS-60 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Jensen JiMS-60, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Jensen JiMS-60.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Jensen JiMS-60. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Jensen JiMS-60 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
