Manuale d’uso / di manutenzione del prodotto STL2 del fabbricante Intel
Vai alla pagina of 103
STL2 Server Board Technical Product Specification Revision 1.0 September 22, 2000 Enterprise Platforms Group.
Revision History STL2 Server Board TPS ii Revision History Date Revision Number Modifications 6/15/00 0.5 Initial release. 6/20/00 0.6 Updated connector reference designators 7/7/00 0.61 Updated silkscreen reference designators to agree with STL2 FAB2.
STL2 Server Board TPS Table of Contents Revision 1.0 iii Table of Contents 1. Introduction ..................................................................................................................... 1-1 1.1 Purpose ..........................
Table of Contents STL2 Server Board TPS iv 3.5 Wake On LAN Function ............................................................................................ 3-28 4. Basic Input Output System (BIOS) .................................................
STL2 Server Board TPS Table of Contents Revision 1.0 v 5.2.6 Speaker Connector (P31) ...................................................................................... 5-69 5.2.7 Speaker Connector (P25) ............................................
List of Figures STL2 Server Board TPS vi List of Figures Figure 1 -1. STL2 Server Board Block Diagram ....................................................................... 1-3 Figure 2 -1. Em bedded NIC PCI Signals ..................................
STL2 Server Board TPS List of Tables Revision 1.0 vii List of Tables Table 2 -1. STL2 Server Board Supported Processors ............................................................ 2-5 Table 2 -2. SCSI Transfer Speeds .................................
List of Tables STL2 Server Board TPS viii Table 4 -26. POST Error Messages and Codes ..................................................................... 4-52 Table 4 -27. Adaptec SCSI Utility Setup Configurations ....................................
STL2 Server Board TPS Introduction Revision 1.0 1-1 1. Introduction 1.1 Purpose This document provides an architectural overview of the STL2 server board, including the board layout of major components and connectors, and an overview of the server board’s feature set.
Introduction STL2 Server Board TPS 1-2 • 32-bit, 33 MHz, 5V keyed PCI segment with four expansion connectors and three embedded devices. - Four 32-bit, 33 MHz, 5V keyed PCI expansion slots. - IB6566 South Bridge , which provides IDE and USB controller functions.
STL2 Server Board TPS Introduction Revision 1.0 1-3 NB6635 North Bridge 3.0 LE IB6566 South Bridge 2 USB IDE STL2 Server Board Block Diagram STL2 Server Board Block Diagram 2 64bit/66Mhz, 3.
Introduction STL2 Server Board TPS 1-4 < This page intentionally left blank >.
STL2 Server Board TPS STL2 Server Board Architecture Overview Revision 1.0 2-5 2. STL2 Server Board Architecture Overview The architecture of the STL2 server board is based on a design that supports dual-processor operation with Intel Pentium III processors and the ServerWorks ServerSet III LE chipset .
STL2 Server Board Architecture Overview STL2 Server Board TPS 2-6 2.1.2 Dual Processor Operation The Pentium III processor interface is designed to be MP-ready. Each processor contains a local APIC section for interrupt handling. When two processors are installed, both processors must be of identical revision, core voltage, and bus/core speeds.
STL2 Server Board TPS STL2 Server Board Architecture Overview Revision 1.0 2-7 The boxed processor fan heatsink will keep the processor core at the recommended junction temperature, as long as airflow through the fan heatsink is unimpeded. It is recommended that the air temperature entering the fan inlet be below 45 ° C (measured at 0.
STL2 Server Board Architecture Overview STL2 Server Board TPS 2-8 System memory begins at address 0 and is continuous (flat addressing) up to the maximum amount of DRAM installed (exception: system memory is noncontiguous in the ranges defined as memory holes using configuration registers).
STL2 Server Board TPS STL2 Server Board Architecture Overview Revision 1.0 2-9 Table 2 - 2 . SCSI Transfer Speeds SCSI Port Asynchronous Fast-5 Fast-10 Fast-20 Fast-40 Fast-80/Ultra160 SE Yes yes yes yes no no LVD Yes yes yes yes yes yes In the STL2 server board implementation, channel A provides a 68-pin, 16-bit LVD Ultra160 SCSI interface.
STL2 Server Board Architecture Overview STL2 Server Board TPS 2-10 7. Defaults to Memory Write. The extensions to memory commands (memory read multiple, memory read line, and memory write and invalidate) work with the cache line size register to give the cache controller advance knowledge of the minimum amount of data to expect.
STL2 Server Board TPS STL2 Server Board Architecture Overview Revision 1.0 2-11 The 82559 is a highly integrated PCI LAN controller for 10 or 100 Mbps Fast Ethernet networks.
STL2 Server Board Architecture Overview STL2 Server Board TPS 2-12 • Integrated physical interface to TX magnetics. • The magnetics component terminates the 100Base-TX connector interface. A flash device stores the network ID. • Support for Wake-on-LAN (WOL).
STL2 Server Board TPS STL2 Server Board Architecture Overview Revision 1.0 2-13 2.4.2.2.2 Video Controller PCI Commands The Rage IIC supports the following PCI commands: Table 2 - 4 .
STL2 Server Board Architecture Overview STL2 Server Board TPS 2-14 2.4.2.3 IB6566 South Bridge The IB6566 South Bridge is a PCI device that provides multiple PCI functions in a single package: PCI-to-ISA bridge, PCI IDE interface, PCI USB controller, and power management controller.
STL2 Server Board TPS STL2 Server Board Architecture Overview Revision 1.0 2-15 2.4.2.3.3 USB Interface The IB6566 South Bridge contains a USB controller and USB hub. The USB controller moves data between main memory and the two USB connectors provided.
STL2 Server Board Architecture Overview STL2 Server Board TPS 2-16 2.5.1.1 Serial Ports Two 9-pin connectors in D-Sub housing are provided for serial port A and serial port B. Both ports are compatible with 16550A and 16450 modes, and both are re-locatable.
STL2 Server Board TPS STL2 Server Board Architecture Overview Revision 1.0 2-17 2.5.2 BIOS Flash The STL2 baseboard incorporates an Intel ® 5V FlashFile™ 28F008SA Flash Memory component. The 28F008SA is a high-performance 8 Mbit memory that is organized as 1 MB of 8 bits each.
STL2 Server Board Architecture Overview STL2 Server Board TPS 2-18 IRQ0/INTR IRQ1 IRQ2 IRQ3 IRQ4 IRQ5 IRQ6 IRQ7 IRQ8 IRQ9/SCI IRQ10 IRQ11 IRQ12 IRQ13 IRQ14 IRQ15 PCIIRQ0# PCIIRQ1# PCIIRQ2# PCIIRQ3# PC.
STL2 Server Board TPS STL2 Server Board Architecture Overview Revision 1.0 2-19 IRQ0 IRQ1 IRQ2 IRQ3 IRQ4 IRQ5 IRQ6 IRQ7 IRQ8 IRQ9 IRQ10 IRQ11 IRQ12 IRQ13 IRQ14 IRQ15 PIRQ0(16) PIRQ1(17) PIRQ2(18) PIRQ.
STL2 Server Board Architecture Overview STL2 Server Board TPS 2-20 2.6.3 PCI Ids The STL2 server board PCI Ids are defined as follows: Table 2 - 6 . STL2 PCI IDs Device Bus Number [23:16] Device Number [15:11] Slot ID Signal NB6635 North Bridge 3.
STL2 Server Board TPS STL2 Server Board Architecture Overview Revision 1.0 2-21.
.
STL2 Server Board TPS Server Management Revision 1.0 3-23 3. Server Management This section describes the features of the server management subsystem for the STL2 server board. The server management subsystem consists of the BIOS , hardware, and firmware features built into the server board.
Server Management STL2 Server Board TPS 3-24 • Monitors the event receiver • Controls secure mode, inlucluding video blanding, diskett write-protect monitoring, and fornt panel lock/unlock initiation • Controls Wake-on-Lan via Magic Packet* support 3.
STL2 Server Board TPS Server Management Revision 1.0 3-25 Sensor Number Sensor Type Monitoring Device 94h BIOS POST (Error) Code 95h Log Disable Log Area Reset / Cleared (bit 2) ECC single bit Error D.
Server Management STL2 Server Board TPS 3-26 Sensor Type Sensor Type Code Sensor-Specific Offset Event Remarks Platform Security Violation Attempt 06h 00h Secured Mode Violation Attempt Power/sleep sw.
STL2 Server Board TPS Server Management Revision 1.0 3-27 Sensor Type Sensor Type Code Sensor-Specific Offset Event Remarks 04h CD-ROM boot completed The server has been booted (not supported) OS Crit.
Server Management STL2 Server Board TPS 3-28 • s4: Hibernate or Save to Disk. The memory and machine state are saved to disk. Pressing the power button or another wakeup event restores the system state from the disk and resumes normal operation. This assumes that no hardware changes were made to the system while it was off.
STL2 Server Board TPS Basic Input Output System (BIOS) Revision 1.0 4-29 4. Basic Input Output System (BIOS ) This section describes BIOS embedded software for the STL2 board set.
Basic Input Output System (BIOS) STL2 Server Board TPS 4-30 4.1.1 System BIOS The system BIOS is the core of the flash ROM-resident portion of the BIOS. The system BIOS provides standard PC-BIOS services and support for some new industry standards, such as the Advanced Configuration and Power Interface Specification , Revision 1.
STL2 Server Board TPS Basic Input Output System (BIOS) Revision 1.0 4-31 Application software must use standard advanced programmable interrupts (APIs) to access these areas and may not access the data directly. 4.2 Setup Utility This section describes the ROM resident setup utility that provides the means to configure the platform.
Basic Input Output System (BIOS) STL2 Server Board TPS 4-32 4.2.2.1 Entering Setup Utility During POST operation, the user is prompted to enter Setup using the F2 function key as follows: Press <F2.
STL2 Server Board TPS Basic Input Output System (BIOS) Revision 1.0 4-33 ← ← → → Select Menu The left and right arrow keys are used to move between the major menu pages.
Basic Input Output System (BIOS) STL2 Server Board TPS 4-34 • System Menu • Boot Menu • Exit Menu These and associated submenus are described below. 4.2.2.4 Main Menu Selections The following tables describe the available functions on the Main Menu , and associated submenus.
STL2 Server Board TPS Basic Input Output System (BIOS) Revision 1.0 4-35 Table 4 - 3 . Primary Master and Slave Adapters Submenu Selections Feature Choices or Display Only Description User Setting Typ.
Basic Input Output System (BIOS) STL2 Server Board TPS 4-36 4.2.2.5 Advanced Menu Selections The following tables describe the menu options and associated submenus available on the Advanced Menu. Please note that MPS 1.4 / 1.1 selection is no longer configurable.
STL2 Server Board TPS Basic Input Output System (BIOS) Revision 1.0 4-37 Table 4 - 7 . Peripheral Configuration Submenu Selections Feature Choices or Display Only Description User Setting Serial Port .
Basic Input Output System (BIOS) STL2 Server Board TPS 4-38 Table 4 - 8 . PCI Device Submenu Selections Feature Choices or Display Only Description User Setting PCI IRQ1 through PCI IRQ14 Disabled Auto Select IRQ3 IRQ4 IRQ5 IRQ6 IRQ7 IRQ9 IRQ10 IRQ11 IRQ12 Specify which PIC IRQ a certain PCI IRQ maps to.
STL2 Server Board TPS Basic Input Output System (BIOS) Revision 1.0 4-39 Feature Choices or Display Only Description User Setting Keyboard Auto-repeat Rate 2/sec 6/sec 10/sec 13.3/sec 18.5/sec 21.8/sec 26.7/sec 30/sec Selects key repeat rate. Keyboard Auto-repeat Delay 0.
Basic Input Output System (BIOS) STL2 Server Board TPS 4-40 Table 4 - 12 . Secure Mode Submenu Selections Feature Choices or Display Only Description User Setting Secure Mode Timer Disabled 1 Min 2 Min 5 Min 10 min 30 min 1 hr 2 hr Period of keyboard and mouse inactivity before secure mode is activated and a password is required gain access.
STL2 Server Board TPS Basic Input Output System (BIOS) Revision 1.0 4-41 Disabled Table 4 - 15 . Console Redirect ion Submenu Selections Feature Choices or Display Only Description User Setting Serial Port Address Disabled Serial Port 2 (3F8h/IRQ4) Serial Port 2 (2F8h/IRQ3) If enabled, the console will be redirected to this port.
Basic Input Output System (BIOS) STL2 Server Board TPS 4-42 3 Hard Drive Attempts to boot from a hard drive device. 4 Intel UNDI, PXE-2.0 Attempts to boot from a PXE server.
STL2 Server Board TPS Basic Input Output System (BIOS) Revision 1.0 4-43 4.4 CMOS Default Override The BIOS detects the state of the CMOS default switch. If the switch is set to “CMOS Clear” prior to power-on or a hard reset, the BIOS changes the CMOS and NVRAM settings to a default state.
Basic Input Output System (BIOS) STL2 Server Board TPS 4-44 To manually load a portion of the BIOS , the user must specify which data file(s) to load. The choices include • PLATCBLU.BIN • PLATCXLU.BIN • PLATCXXX.BIN • PLATCXLX.BIN • PLATCXXU.
STL2 Server Board TPS Basic Input Output System (BIOS) Revision 1.0 4-45 • The system state must be preserved by the user binary (all registers, including extended and MMX, stack contents, and nonuser binary data space, etc.). • The user binary code must be relocatable.
Basic Input Output System (BIOS) STL2 Server Board TPS 4-46 The following code fragment shows the header and format for a user binary: db 55h, 0AAh, 20h ; 16KB USER Area MyCode PROC FAR ; MUST be a FA.
STL2 Server Board TPS Basic Input Output System (BIOS) Revision 1.0 4-47 scan. Table 4 - 22 . Format of the User Binary Information Structure Offset Bit Definition 0 Bit 0 = 1 if mandatory user binary, 0 if not mandatory. If a user binary is mandatory, it will always be executed.
Basic Input Output System (BIOS) STL2 Server Board TPS 4-48 mode operation, PHLASH (in non-interactive mode only) automatically updates only the main system BIOS.
STL2 Server Board TPS Basic Input Output System (BIOS) Revision 1.0 4-49 • The 8-bit test point is broken down to four 2-bit groups. • Each group is made one-based (1 through 4) • One to four beeps are generated based on each group’s 2-bit pattern.
Basic Input Output System (BIOS) STL2 Server Board TPS 4-50 CP Beeps Reason 3C Configure advanced chipset registers 3D Load alternate registers with CMOS values 40 Set Initial Processor speed new 42 I.
STL2 Server Board TPS Basic Input Output System (BIOS) Revision 1.0 4-51 CP Beeps Reason 8C Initialize floppy controller 90 Initialize hard disk controller 91 Initialize local bus hard disk controller.
Basic Input Output System (BIOS) STL2 Server Board TPS 4-52 Table 4 - 25 . Recovery BIOS Port-80 Codes CP Beeps Reason E0 Initialize chip set E1 Initialize bridge E2 Initialize processor E3 Initialize.
STL2 Server Board TPS Basic Input Output System (BIOS) Revision 1.0 4-53 Code Error Message Failure Description 0230: System RAM Failed at offset System RAM error Offset address 0231: Shadow RAM Faile.
Basic Input Output System (BIOS) STL2 Server Board TPS 4-54 Code Error Message Failure Description 0B93: BMC SDR Repository empty. BMC device (chip) failed 0B94: IPMB signal lines do not respond. SMC(Satellite Management Controller ) failed (Available for use except for the access function to SMC via IPMB) 0B95 BMC FRU device failure.
STL2 Server Board TPS Basic Input Output System (BIOS) Revision 1.0 4-55 3-3-1-4 Memory Not Detected — — 1-2 O ption ROM Initialization Error Failure to initialize Option ROM BIOS Change system bo.
Basic Input Output System (BIOS) STL2 Server Board TPS 4-56 4.8 Adaptec SCSI Utility The Adaptec SCSI Utility detects the SCSI host adapters on the server board. The Adaptec SCSI Utility is used to: • Change default values • Check and/or change SCSI device settings that may conflict with those of other devices in the server.
STL2 Server Board TPS Basic Input Output System (BIOS) Revision 1.0 4-57 Key Action Arrows Up and down arrows move from one parameter to another within a screen. ENTER Displays options for a configurable parameter. Selects an option. ESC Moves back to previous screen or parameter or EXIT if at the Main menu.
Basic Input Output System (BIOS) STL2 Server Board TPS 4-58 2. Do not remove media from a removable media drive if it is under BIOS control. 4.8.3 Exiting Adaptec SCSI Utility To exit the Adaptec SCSI Utility, the user presses the Esc key several times, until a message prompts him / her to exit.
STL2 Server Board TPS Basic Input Output System (BIOS) Revision 1.0 4-59 < This page intentionally left blank >.
.
STL2 Server Board TPS Jumpers and Connectors Revision 1.0 5-61 5. Jumpers and Connectors STL2 Server Board Jumper and Connector Locations The following figure shows the location of the jumper blocks and connectors on the STL2 Server board. Figure 5 - 1 .
Jumpers and Connectors STL2 Server Board TPS 5-62 L. System fan connector FAN3A (P29) M. Battery N. System fan connector FAN2A (P27) O. Front panel connector(P23) P. Four pin speaker connector (P25) Q. Ultra Single Ended (SE) SCSI connector (P9) R. Ultra160 LVD SCSI connector (P8) S.
STL2 Server Board TPS Jumpers and Connectors Revision 1.0 5-63 E. Parallel port connector F. Keyboard connector G. Mouse connector H. Video connector I. Network connector 5.1 Jumper Blocks Jumpers on several jumper blocks of the STL2 server board are used to set the system configuration.
Jumpers and Connectors STL2 Server Board TPS 5-64 Table 5 - 1 . Jumper Block 1J15 Settings Jumper Pin Numbers Function Jumper Position What it does at system reset 1 - 2 CMOS clear Open, Protect Prese.
STL2 Server Board TPS Jumpers and Connectors Revision 1.0 5-65 5. After POST completes, power down the system, unplug the power cable(s), and remove the chassis panel. 6. Remove the jumper from pins 1-2 and store the jumper on pins 11-12. 7. Replace the chassis panel and connect system cables.
Jumpers and Connectors STL2 Server Board TPS 5-66 Table 5 - 2 . Jumper Block 5E1 Settings Processor Frequency ( MHz) Jumper Settings 1-2 3-4 5-6 7-8 667 Not Jumpered Not Jumpered Jumpered Jumpered 733.
STL2 Server Board TPS Jumpers and Connectors Revision 1.0 5-67 Table 5 - 4 . Jumper Block 1L4 Settings Jumper Pin Numbers Function Jumper Position Function 1 – 2 FRB Open, Enabled Enables FRB Closed, Disabled Disables FRB 3 – 4 Front Cover Chassis Intrusion Sensor Open, Enabled Enables Chassis Intrusion sensing.
Jumpers and Connectors STL2 Server Board TPS 5-68 5.2.1 Main ATX Power Connector (P33) Table 5 - 6 . Main ATX Power Connector Pinout Pin Signal Wire color Pin Signal Wire Color 1 +3.
STL2 Server Board TPS Jumpers and Connectors Revision 1.0 5-69 5.2.4 System Fan Connector s (P29, P27, P11) • System Fan 1: P11 • System Fan 2: P27 • System Fan 3: P29 Table 5 - 9 . Board Fan Connector Pinout Pin Signal 1 Fan Sense 2 + 12 VDC 3 COM 5.
Jumpers and Connectors STL2 Server Board TPS 5-70 5.2.8 Diskette Drive Connector (P20) 18 34 1 17 Figure 5 - 3 . Diskette Drive Connector Pin Diagram Table 5 - 13 .
STL2 Server Board TPS Jumpers and Connectors Revision 1.0 5-71 Pin Signal Pin Signal 4 NC 12 DDCDAT 5 GND 13 HSYNC 6 GND 14 VSYNC 7 GND 15 DDCCLK 8 GND 5.2.10 Keyboard and Mouse Connectors The keyboard and mouse connectors are functionally equivalent.
Jumpers and Connectors STL2 Server Board TPS 5-72 Pin Signal Description 2 RXD Receive data 3 TXD Transmit data 4 DTR Data terminal ready 5 GND Ground 6 DSR Data set ready 7 RTS Return to send 8 CTS Clear to send 9 RIA Ring indication active 5.2.13 RJ-45 LAN Connector Table 5 - 18 .
STL2 Server Board TPS Jumpers and Connectors Revision 1.0 5-73 5.2.15 Ultra SCSI Connector (P9) Table 5 - 20 . Ultra SCSI Connector Pinout Pin Signal Pin Signal 1-16 GND 49-50 GND 17 TERMPWR 51 TERMPW.
Jumpers and Connectors STL2 Server Board TPS 5-74 Pin Signal Pin Signal 15 GND 49 GND 16 DIFFSENSA 50 GND 17 TRMPWRA 51 TRMPWRA 18 TRMPWRA 52 TRMPWRA 19 No Connection 53 No Connection 20 GND 54 GND 21.
STL2 Server Board TPS Jumpers and Connectors Revision 1.0 5-75 Pin Signal Pin Signal 5 DD4 25 DD11 6 DD3 26 DD12 7 DD2 27 DD13 8 DD1 28 DD14 9 DD0 29 DD15 10 GND 30 No Connection 11 IDEDRQ 31 GND 12 D.
Jumpers and Connectors STL2 Server Board TPS 5-76 A21 +3.3 V B21 AD29 A52 CBE0_L B52 AD8 A22 AD28 B22 GND A53 +3.3 V B53 AD7 A23 AD26 B23 AD27 A54 AD6 B54 +3.3 V A24 GND B24 AD25 A55 AD4 B55 AD5 A25 AD24 B25 +3.3 V A56 GND B56 AD3 A26 IDSEL B26 CBE3_L A57 AD2 B57 GND A27 +3.
STL2 Server Board TPS Jumpers and Connectors Revision 1.0 5-77 Pin Signal Pin Signal Pin Signal Pin Signal A27 +3.3 V B27 AD23 A74 AD54 B74 AD55 A28 AD22 B28 GND A75 +3.3 V B75 AD53 A29 AD20 B29 AD21 A76 AD52 B76 GND A30 GND B30 AD19 A77 AD50 B77 AD51 A31 AD18 B31 +3.
Jumpers and Connectors STL2 Server Board TPS 5-78 16 Reserved 17 Reset Switch (GND) 18 Reserved 19 ACPI Sleep Switch (Low True) 20 Chassis Intrusion 21 ACPI Sleep Switch (GND) 22 Reserved 23 NMI to CP.
STL2 Server Board TPS Jumpers and Connectors Revision 1.0 5-79 < This page intentionally left blank >.
.
STL2 Server Board TPS Power Consumption Revision 1.0 6-81 6. Power Consumption 6.1 Calculated Power Consumption The following table shows the calculated power consumption for each of the power supply voltage rails for the STL2 server board. These values were calculated using the specifications for the on-board components and processors.
Power Consumption STL2 Server Board TPS 6-82 The total power calculation assumes a system configuration containing dual Pentium® III 1 GHz processors with the VRM for both processors supplied by the .
STL2 Server Board TPS Mechanical Specifications Revision 1.0 7-83 7. Mechanical Specifications The diagram on the following page shows the mechanical specifications of the STL2 server board. All dimensions are in inches. Connectors are dimensioned to pin 1.
Mechanical Specifications STL2 Server Board TPS 7-84 < This page intentionally left blank >.
STL2 Server Board TPS Regulatory and Integration Information Revision 1.0 8-85 8. Regulatory and Integration Information 8.1 Regulatory Compliance The STL2 server board complies with the following safety standard requirements.
Regulatory and Integration Information STL2 Server Board TPS 8-86 • Intel’s UL File Number E139761 (Component side). • Battery “+” marking: located on the component side of the board in close proximity to the battery holder.
STL2 Server Board TPS Regulatory and Integration Information Revision 1.0 8-87 8.2.2.1 In Europe The CE marking signifies compliance with all relevant European requirements.
Regulatory and Integration Information STL2 Server Board TPS 8-88 8.2.5 Use Only for Intended Applications This product was evaluated for use in ITE computers that will be installed in offices, schools, computer rooms and similar locations.
STL2 Server Board TPS Regulatory and Integration Information Revision 1.0 8-89 8.3.2 System Environmental Testing The system environmental tests include the following: • Temperature Operating and Non-Operating • Humidity Non-Operating • Shock Packaged and Unpackaged • Vibration Packaged and Unpackaged • AC Voltage , Freq.
Regulatory and Integration Information STL2 Server Board TPS 8-90 < This page intentionally left blank >.
STL2 Server Board TPS Glossary Revision 1.0 I Glossary Term Definition ASIC Application Specific Integrated Circuit ASR Asynchronous Reset BMC Baseboard Management Controller BSP Bootstrap Processor E.
Reference Documents STL2 Server Board TPS II Reference Documents • ServerWorks ServerSet* III LE North Bridge Specification. • ServerWorks ServerSet* III LE South Bridge Specification. • PCI Local Bus Specification , Revision 2.2. • USB Specification , Revision 1.
STL2 Server Board EPS Index Revision 1.0 III Index A ACPI, 2-7, 3-23, 3-25, 3-26, 4-49, 5-73 Adaptec* AIC7899, 1-1, 2-8 Address, 2-9, 2-13, 2-17, 3-25, 4-39, 4-52 AIC-7899, 2-8, 2-9, 2-10, 2-20, 4-40 APIC, 2-6, 2-10, 2-14, 2-15, 2-17 Architecture, 2-5 ATI* Rage IIC, 2-12, 2-13, 2-20 B Baseboard Management Controller.
Index STL2 Server Board TPS IV ISA, 2-14, 2-15, 2-16, 2-17, 3-21, 3-24, 4-48 J JEDEC, 1-1, 2-7 L LED, 5-73 Legacy, 2-15, 4-40 Logo, 4-41 LUN, 4-55 M Magic Packet, 3-22 Main Menu, 4-29, 4-30, 4-31, 4-3.
STL2 Server Board EPS Index Revision 1.0 V Super I/O Controller, 1-2 System Event Log, See SEL System Management Software, 3-21 System Setup Utility, See SSU T Temperature, 3-22, 3-23, 4-51, 8-82 term.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Intel STL2 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Intel STL2 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Intel STL2 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Intel STL2 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Intel STL2, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Intel STL2.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Intel STL2. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Intel STL2 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.