Manuale d’uso / di manutenzione del prodotto MACH V del fabbricante Impex
Vai alla pagina of 29
NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Pack Assembly Instruc tion Parts L ist Resistance Chart Warranty Ordering Parts Model MACH V Retain This Manual for Reference 08-26-03 OWNER'S MANUAL MARCY MAGNUM V HOME GYM IMPEX FITNESS PRODUCTS 14777 DON JULIAN RD.
TA BLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICE...................................................................... 2 HARDW ARE PACK…….......….
IM PORTA NT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assembl e or operate y our machine.
HA RDWA RE PA CK 3.
HA RDWA RE PA CK 4.
HA RDWA RE PA CK 5.
HA RDWA RE PA CK 6.
A SSEM BLY INSTRUCTI ON Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches NOTE: It is strongly recommended this machine be assembled by tw o or more people to avoid possible inj ury. STEP 1 (See Diagram 1) A.) Attach tw o Ø 2 ½” Rubber Bumpers ( #88) to the holes on the Mai n Base Frame (#1).
STEP 2 (See Diagram 2) A.) Connect the Main Base Frame (#1) to both the Front & Rear Stabilizers (#5 & 4). Secure each end with tw o M10 x 2 ¾” Carri age Bolts ( #109), one 4 ¾” x 2” Bracket (#44), tw o ∅ ¾” W ashers (#124), and tw o M10 Aircraft Nuts (#128).
STEP 3 (See Diagram 3) A.) Pl ace the Swi vel Fr ame (#11) onto the ax le on the Main Base Frame (#1). Secur e it wi th one M10 x ¾ ” Allen Bolt (#120) and Ø ¾ ” W asher (#124). B.) Attach the Foot Suppor t (#12) to the Mai n Base Frame. Attach the 4” x 2” Bracket (#42) to the opposite side on the Mai n Base Frame.
STEP 4 (See Diagram 4) A.) Attach the Butter fly Support Fr ame (#15) to the front of the Front Vertic al Beam (#7). Attach the Butterfly Pull ey Suppor t (#16) to the back of the Front Vertic al Beam (#7). Al ign the hol es and secure them wi th two M 10 x 3 ¾ ” Carr iage Bol ts (#107), ∅ ¾” W ashers (#124), and M10 Ai rcraft Nuts (#128).
STEP 5 (See Diagram 5) A.) Instal l 19 W eight Plates (#58). To install the plates, hold the plate at an ang le and place between the two Guide R ods (#10) then dr op it dow n. Make sure the gr ooves on the pl astic cover s all face up. The plates should all interlock w ith each other.
STEP6 (See Diagram 6) A.) Attach the Bench Pr ess Base (#14) to the opening on the Rear Vertical Beam ( #6). Carefully place two ∅ 1 ½” x Ø 1” W ashers (#132) in betw een the Base and the Rear Vertical Beam. Ali gn the holes and insert a 9” Axle ( #32).
STEP 7 (See Diagram 7) A.) Slide the Sli ding Block ( #37) onto the Main Seat Suppor t (#2). Thread a Lock Knob (#87) into the hole on the Sliding Block to hold it in position. B.) Attach the rear end of Main Seat Support ( #2) to the open bracket on the Fr ont Vertical Beam (#7).
STEP 8 (See Diagram 8) A.) Attach Backrest Board (#48) to the Front Vertic al Beam (#7). Secur e it w ith two M 8 x 3 3/8” Allen Bolts ( #115) and Ø 5/8” W ashers (#125). B.) Attach the Adjustable Backrest Board ( #49) to the Backrest Suppor ts (#25).
STEP 9 (See Diagram 9) A.) Attach the two W eight Stack Cov ers (#39) to the Top Socket Assembly (#9) and Main Base Frame (#1). Secur e each Cover wi th two M10 x ¾” Allen Bolts ( #120) and Ø ¾” W ashers (#124).
16.
STEP 10 (See Cable Loop Diagram & Diagram 10) A.) Attach one end of the 143” Butterf ly Cable (#56) to the Clip on the Butterfly Pulley Bracket (#17) on the right si de. Draw the Cable to the Butterfly Pulley Support (#16). B.) Attach a Pulley (#66) to the open bracket.
STEP 11 (See Cable Loop Diagram & Diagram 11) A.) Attach the 118” Upper Cabl e (#52) to the front opening on the Upper Frame (#8). Attach a Pulley to the opening. Secur e the Pulley wi th one M10 x 2 ½ ” Allen Bolt (#117), tw o Ø 7/8” Pulley Bushings ( #70), and one M10 Ai rcraft Nut (#128) .
DIAGRAM 11 19.
STEP 12 (See Cable Loop Diagram & Diagram 12) A.) Attach the Bal l-end of the 163” AB Cabl e (#55) to the opening on the Front Vertical Beam (#7). Attach a Pull ey to the opening . Secure it with one M10 x 2 ½” Allen Bolt (#117), tw o Ø 7/8” Pulley Bushing s (#70), and one M 10 Aircr aft Nut (#128).
DIAGRAM 12 21.
STEP 13 (See Cable Loop Diagram & Diagram 13) A.) Attach one end of the 78” Bench Press Cable (#54) to a Sing le Floating Pulley Bracket (#35). Secure it w ith one M10 x 1” All en Bolt (#114), tw o Ø ¾” W ashers (#124), and one M10 Aircr a f t Nut (#128).
STEP 14 (See Cable Loop Diagram & Diagram 14) A.) Attach the 163” Lower Cable (#53) to the Swivel Fr ame (#11). B.) Instal l a Pulley to the bracket on the Swiv el Frame w ith one M10 x 1 ¾” Al len Bolt (#113), tw o Ø ¾” W ashers (#124), one L-shaped Br acket (#46) and one M 10 Aircraft Nut (#128).
24.
PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Base F ram e 1 2 Main Seat Support 1 3 Front Suppor t Fram e 1 4 Rear Stabilizer 1 5 Front Stabilizer 1 6 Rear Ver tical Beam 1 7 Front Ver tical Beam 1 8 .
110 M10 x 7 ¼” Hex Bolt 1 4 111 M6 x 1 5/8” Hex Bolt 2 112 M6 x 1 3/8” Hex Bolt 4 113 M10 x 1 ¾” Allen Bolt 17 114 M10 x 1” Allen Bolt 4 115 M8 x 3 3/8” Allen Bolt 2 116 M10 x 3” Allen.
MACH IV WEIGHT RESISTANCE CHART * Numbers are approximat e. A ct ual w eights may vary. * Values for But terfly are for each arm. 27 Plate Arm Curl Low Pulley High Pulley Butterfly AB Station Bench Pr.
IMPEX INC. LIMITED WARRANTY IMPEX Inc. ( "IMPEX") warrants this produc t to be f ree from def ects in work m ans hip and m aterial, under norm al use and s ervic e conditions , f or a per iod of two years on the F ram e f r om the date of purchase.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Impex MACH V è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Impex MACH V - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Impex MACH V imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Impex MACH V ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Impex MACH V, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Impex MACH V.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Impex MACH V. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Impex MACH V insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
