Manuale d’uso / di manutenzione del prodotto SN32-9080-01 del fabbricante IBM
Vai alla pagina of 26
Su p p l e m e nt t o th e RS / 6000 7 043 43P Se ri es ( S A38-05 1 1 an d S A38-05 1 2 ) S e rvi c e G ui d e a n d U s e r’s G ui d e SN32-9080-01 IBM.
Second Edition (December 2000) Before using this information and the product it supports, read the information in “Appendix. Notices” on page 15. © International Business Machines Corporation 2000.
Contents About This Book ....................... v ISO 9000 .......................... v Online Publications ....................... v Related Publications ...................... v T rademarks ......................... v Chapter 1. 7043–140 and 7043–150 Fansink Removal and Replacement Procedures .
iv Supplement to the Service Guide and User’s Guide.
About This Book This supplement provides updates to the following publications: v RS/6000 7043 43P Series User’s Guide , SA38-051 1 v RS/6000 7043 43P Series Service Guide , SA38-0512 ISO 9000 ISO 9000 registered quality systems were used in the development and manufacturing of this product.
vi Supplement to the Service Guide and User’s Guide.
Chapter 1. 7043–140 and 7043–150 Fansink Removal and Replacement Procedures This chapter provides information on replacing defective 7043–140 and 7043–150 fansinks without having to replace the entire system board.
T able 2. Fansink numbers by System Board Assembly and FRU Numbers (continued). Machine T ype FRU Part Numbers System Board Assembly Part Numbers Fansink Number 7043–150 375MHZ New V ersion System B.
4. T o remove the disk drive bracket, refer to the ″ Removing Internal Drive ″ section of the RS/6000 7043–43P Series Service Guide . Carefully place the bracket assembly on top of the power supply (leave the hard files plugged in). Note: Disconect temporarily any PCI Adapter Card installed in slot 5 in order to remove the disk drive bracket.
Replacement 1. If you are replacing a fansink 09P1 125, install the new component by hooking the side opposite the finger tab and then pushing the finger tab side down until it locks into position. OR If you are replacing a fansink 09P1 126, first remove the paper pull tab to expose the thermal grease underneath.
5. Locate and unplug the fan and disconnect the fansink assembly power cable from the CPU fansink connector (J26). Note: There are two possible fansink connections for this system board: right-angle finger tabs, and wire springs.
Replacement 1. If you are replacing a fansink 09P1 126, first remove the paper pull tab to expose the thermal grease underneath. Install the new fansink by hooking the side opposite the finger tab and then pushing the finger tab side down until it locks into position.
Chapter 2. 7043–150 System Features This chapter contains information specific to both the 250MHz and 375MHz options for the Model 150, and applies to the RS/6000 7043 43P Series User’s Guide and the RS/6000 7043 43P Series Service Guide. All other information is consistent with the system books.
Keyboard and Mouse v Standard: 101–Key Enhanced keyboard v Optional: 101/102 or 106–Key Enhanced Keyboard v Standard: 3-button mouse Front-Panel Display v 4-digit LED diagnostics display Input/Out.
Setting the SCSI Security Jumpers Note: Carefully read and follow the safety guidelines detailed in the corresponding section of the RS/6000 7043 43P Series User’s Guide , SA38-051 1. T o increase system unit security , the external SCSI connector can be disabled by changing jumpers inside the system unit.
System Board Locations for Model 150 B1 Battery connector J1 W akeup-on-LAN jumper J2 5x5 Auxiliary 5v connector J3 Audio input connector J4 Internal SCSI connector #2 J5 CD-ROM audio connector J6 CD-.
J13 Audio output connector J15 Remote Power-up Jumper J16 Diskette drive connector J17 Microphone jack J18 Reset Connector J19 Memory Connector 3 J20 Power-on Password jumper J22 Headphone jack J23 Se.
System Board, Cables, and Accessories 12 Supplement to the Service Guide and User’s Guide.
Index Number FRU Number Units Per Assy Description 1 09P0168 1 System Board (250 MHz) 2 27F4212 6 Screw 3 39H8697 1 Hex Standoff 4 19L1808 1-4 64MB DIMM 19L1809 1-4 128MB DIMM 29L3302 1-4 256MB DIMM 5.
14 Supplement to the Service Guide and User’s Guide.
Appendix. Notices This information was developed for products and services offered in the U.S.A. The manufacturer may not offer the products, services, or features discussed in this document in other countries. Consult the manufacturer’s representative for information on the products and services currently available in your area.
16 Supplement to the Service Guide and User’s Guide.
Reader’s Comments — We’d Like to Hear From Y ou Supplement to the RS/6000 7043 43P Series Service Guide and User’s Guide Order Number: SN32–9080–01 Overall how satisfied are you with the i.
Fold and T ape Fold and T ape Please do not Staple Please do not Staple Fold and T ape Fold and T ape Information Development Department H6DS-9561 11400 Burnet Road Austin, TX 78758-3493 Cut or Fold A.
.
IBMR Part Number: 09P2506 Printed in the United States of America on recycled paper containing 10% recovered post-consumer fiber . December 2000 SN32-9080-01 (1P) P/N: 09P2506.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il IBM SN32-9080-01 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del IBM SN32-9080-01 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso IBM SN32-9080-01 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul IBM SN32-9080-01 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il IBM SN32-9080-01, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del IBM SN32-9080-01.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il IBM SN32-9080-01. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo IBM SN32-9080-01 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
