Manuale d’uso / di manutenzione del prodotto 6736-HB0 del fabbricante IBM
Vai alla pagina of 30
L200p User’s Guide Color Monitor English.
ii i First Edition (February / 2003) Note : For important information, refer to the Monitor Safety and Warranty manual that comes with this monitor..
ENGLISH 1 Safety (Read first) .......................................................................................................2 Setting up the monitor .............................................................................................
2 í í í T710_E_update.fm Page 2 Monday, July 8, 2002 11:44 AM.
ENGLISH 3 Setting up the monitor Handling Instructions Handling Instructions 1. Lift the monitor by placing your hands where indicated below. 2. Before using your monitor for the first time, remove the clear protective film from the front of the screen.
4 i This section gives advice on what you should consider before you set up your monitor. W orkplace Preparation Height Position the monitor so that the top of the screen is slightly below your eye level when you sit at your workstation.
ENGLISH 5 5 i With the IBM Flat Panel Monitor, you can adjust its position in various ways for maximum comfort. Viewing Angle You can tilt the screen forward and backward as shown below in Figure A. Swivel You can swivel the screen to the left or the right as shown below in Figure A.
6 Be sure to turn off the power before you perform any maintenance on the monitor. Clean your monitor as follows: • Gently wipe the covers and the screen with a soft cloth. Do not use solvents or abrasives. • Remove finger marks and grease with a damp cloth and mild detergent.
A ENGLISH 7 Connecting your Monitor 1. Turn off your computer and all attached devices. Next, unplug the power cord(s) to your computer and all attached devices. 2. Connect the signal cable. The analog signal cable is already connected to your monitor.
8 1. Switch on your computer. 2. Switch on the monitor power source by pushing the power switch on side rear panel of the monitor.(See Figure B) 3. Switch on your monitor by pushing and releasing the power switch marked [ ] at the front of the bezel. [To switch off your monitor, push and release the power switch again.
ENGLISH 9 To install the device driver in Microsoft ® Windows ® 95 or Windows 98, do the following: You must download files from the User’s Guide and Installation Files CD to use the Plug and Play feature in Windows 95 or Windows 98. Note: 1. Turn off the computer and all attached devices.
10 To install the device driver in Microsoft Windows 2000 Professional or Microsoft Windows Millennium Edition (Me), do the following: You must download files from the User’s Guide and Installation Files CD to use the Plug and Play feature in Windows 2000 or Windows Me.
ENGLISH 11 To install the device driver in Windows XP, do the following: You must download files from the User’s Guide and Installation Files CD to use the Plug and Play feature in Windows XP. Note: 1. Turn off the computer and all attached devices.
12 For digital input, image setup is not required. When you first use your monitor, you must perform Auto Setup for analog input. If you are using digital input, continue with the instructions on page 6. This procedure sets up your monitor to process the video signals from your computer without image discoloration or smearing.
ENGLISH 13 To set up the monitor automatically in DOS, do the following. 1. Turn on the monitor first; then turn on the computer. If the message CHECK SIGNAL CABLE is displayed, or if nothing is displayed, check: • that the video interface cable is not connected properly.
6. When the dot pattern appears, press the button at the bottom of the monitor. This activates the I MAGE S ETUP procedure, which will optimize the display settings with the provided dot-patterns. The screen will momentarily turn black while auto adjustment proceeds.
Normally, you can complete the setup procedure using Automatic Image S etup; however, if your screen image is still distorted after you perform Image S etup or the setup CD does not run on your system, perform M ANUAL I MAGE S ETUP . To manually adjust the image setting, do the following: 1.
16 Adjusting Y our LCD Monitor User controls USER CONTROL FEATURES i The image is already optimized for many display modes, however the user controls can be used to adjust the image to your liking. i The settings are saved after adjustment and when exiting the OSD and will be effective thereafter.
ENGLISH 17 The settings adjustable with the user controls are viewed through the On - Screen Display (OSD). Press the enter button [ ] to display the main OSD menu. Initial appearance of OSD On-screen display (OSD) controls i The LCD monitor needs time to become thermally stable the first time you turn it on each day.
18 OSD Icon Select the COLOR MODE you find most comfortable or fine tune the colors using the CUSTOM menu, if necessary. This function displays the image in its original size or enlarged size so as to fit in the full screen of the LCD panel.
ENGLISH 19 Use this button to make the analog or digital connector active. This feature is used when two computers are connected to the monitor. The default setting is analog. Input Signal • English • Fran ç ais • Italiano • Deutsch • Espa ñ ol OSD Icon Display the detailed information of mode, model name and microcode.
20 i If your computer has previously been used with a CRT monitor and is currently configured to a display mode outside the range that the Flat Panel monitor can display, you may need to re-attach the CRT monitor temporarily until you have reconfigured the computer, preferably to 1600 x 1200 at 60Hz.
ENGLISH 21 To benefit from power management, the monitor must be used in conjunction with a computer that implements the Video Electronics Standards Association (VESA) Display Power Management Signaling (DPMS) Standard.
22 T roubleshooting If you have a problem setting up or using your monitor, you may be able to solve it yourself. Before calling your retailer or IBM, try the suggested actions that are appropriate to your problem. Problem No power to monitor. Possible Cause Suggested Action Reference Brightness and Contrast may be too low.
ENGLISH 23 i For image problems, you may want to run I MAGE S ETUP again before consulting to this section. In most cases, I MAGE SETUP can fix the problems. See Autometic Image Setup for the computer on page 12 for details. Problem Possible Cause Suggested Action Reference There are noises in the video signal The color setting may be incorrect.
24 If you are unable to correct the problem yourself, you may seek further help as follows: Call the IBM HelpCenter ® . In the U.S.A and Puerto Rico call 1-800-772-2227 In Canada(Toronto Only) call 416-383-3344 In Canada(all other) call 1-800-565-3344 In other countries contact your dealer, retailer, or other IBM authorized Servicer.
ENGLISH 25 This color monitor (Type-model 6736-HB0) uses a 20.1-inch TFT LCD. i Power consumption figures are for the monitor and the power supply combined. Weight 8.35 kg (18.41 lbs) 20.1-inch (510.54 mm) 306 mm (12.05 inch) 408 mm (16.04 inch) 0.255 mm (H) x 0.
FRU Monitor FRU Stand FRU Video Cable Hybrid Hybrid Analog SB SB Black 6736-HB0 6736-HB0 6736-HB0 26 Service Information The following parts are for use by IBM service, or IBM authorized dealers, to support the customer warranty. Parts are for service use only.
ENGLISH 27 Notices and T rademarks This section contains information on notices and trademarks. Notices IBM may not offer the products, services, or feature discussed in this document in all countries. Consult your local IBM representative for information on the products and services currently available in your area.
28 Trademarks The following terms, used in this publication, are trademarks or service marks of the IBM Corporation in the United States, other countries, or both; HelpCenter IBM E NERGY S TAR ® is a U.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il IBM 6736-HB0 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del IBM 6736-HB0 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso IBM 6736-HB0 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul IBM 6736-HB0 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il IBM 6736-HB0, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del IBM 6736-HB0.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il IBM 6736-HB0. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo IBM 6736-HB0 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
