Manuale d’uso / di manutenzione del prodotto 1155C del fabbricante Humminbird
Vai alla pagina of 129
.
.
i T hank Y ou! Thank y ou for choosing Humminbird®, America's #1 name in fishfinder s. Humminbird® has built its reputation by designing and manufacturing top-quality , thoroughly reliable marine equipment. Y our Humminbird® is designed for trouble-fr ee use in even the har shest marine environment.
ii T able of Contents 1100 Series™ Introduction 1 How GPS and Cartograph y W ork 1 MMC/SD Slot 2 Software Updates ............................................................................................................... .......................
iii T able of Contents Vi ew s 28 V iews and Readouts ............................................................................................................. ..................... 28 Bird’s Eye No Readouts V ie w ..............................
iv Cursor to W aypoint (Chart or Combo view only) ........................................................................................ 69 Save Current T rack .........................................................................................
v T able of Contents Chart Menu T ab 89 Chart Detail Level ............................................................................................................. ......................... 90 Map Borders .........................................
vi T able of Contents Date Format (Advanced, International only) .............................................................................................. 104 Digits Format (Advanced) ..............................................................
1100 Series™ Introduction Y our 1100 Series™ Chartplotter comes in the following configuration: • Humminbird® 1155c Chartplotter: Networkable GPS Chartplotting System, GPS Receiver included.
The GPS Receiv er included with your 1100 Series™ Chartplotter allows y ou to combine easy-to-use chartplotter and navigation capabilities. T he following GPS functionality is curr ently supported b.
Softwar e Updates Use the MMC/SD slot to update the software ver sion of your control head. T o update the software in your control head, plug in the appropriate MMC/SD card that contains a softw are .
Installation Overvie w Please read all instructions that are rele vant for y our configuration before beginning the installation process. NO TE: Installation procedures will depend on pr oduct configuration.
Inside the boat there is often a channel or conduit used for other wiring, this can be used to route cables. Be sure to route the cables as far as pr actical from the antenna cable of VHF radios or tachometer cables to reduce the possibility of interference.
Control Head Installation Y ou have two choices for mounting y our 1100 Series™ control head, Gimbal mounting , where you use a surface on the boat, such as the dash, to mount the control head so that it can be tilted up or down, or In- dash mounting .
NO TE: When drilling holes in fiberglass hulls, it is best to start with a smaller bit and use pr ogressively lar ger drill bits to reduce the chance of chipping or flaking the outer coating.
6a. If the cables must pass through a hole directly beneath the mounting bracket, mark and drill an additional 1" (25 mm) hole centered between the four mounting holes.
9. Thr ead the cables through the opening in the back of the cable collector cov er . 10. Insert cable connectors into the proper recesses on the cable collector insert. T he cable connectors are ke yed to pre vent rev erse installation, so be careful not to f orce the connectors into the wrong slots.
12. Attach the cable collector insert to the cable collector cover using the (2) #6 Phillips screws provided. 13. Place the control head back onto the mounting bracket. Plug the assembled cable collector into the back of the control head, pushing gently but steadily until you feel the collector snap into place.
In-Dash Mounting the Control Head If you are in-dash mounting the control head, start b y placing the components on the surfaces where y ou intend to install them before installation. Make sur e that the surfaces you ha ve chosen provide adequate protection from wa ve shock, and that all cables can reach the contr ol head.
5. Insert the control head through the mounting hole from the fr ont side of the dash. Place a washer , lock w asher , and wing nut onto each threaded r od and tighten fully . 6. Thr ead the cables through the opening in the back of the cable collector cov er .
9. Attach the cable collector insert to the cable collector cover using the (2) #6 Phillips screws provided. 10. Plug the assembled cable collector into the back of the control head, pushing gently but steadily until you feel the collector snap into place.
Connecting the Control Head P ower Cable to the Boat A 6' (2 m) long power cable is included to supply pow er to the control head. Y ou may shorten or lengthen the cable using 18 gauge multi-stranded copper wire. CA UTION: Some boats have 24 or 36 V olt electric systems, but the control head MUST be connected to a 12 VDC power supply .
GPS Receiver Installation T o optimize performance of the GPS receiver , mount it in an area that has full exposure to the sky . The effective area of r eception is 10° above the horiz on. Different circumstances determine the mounting method appropriate for your GPS r eceiver .
2. Scr ew on the receiv er base to the stem first, making sure that the stem pipe does not protrude from the receiver base. T his adds pr otection to the cable when pulling it through the pipe stem. In addition to this, de-burr the pipe edges to reduce cable abrasion.
Access Under Mounting Location Follow these steps to deck mount the GPS r eceiver when routing the cable down thr ough the mounting location: 1. Determine the best location, then test route the 20' (6 m) cable from the mounting location to the control head.
NO TE: Remember to seal screw holes and drilled holes as needed with marine-grade silicone sealant to protect your boat from water damage. 3. T he GPS receiver has two wir e routing notches.
T esting the System Installation After you have completed the installation of the contr ol head and any other accessories such as the GPS receiver , and have made all the cabling connections required, you must test the installation bef ore using the system.
Getting Started - Using Y our 1100 Series™ Y our 1100 Series™ Chartplotter user interface is easy to use. A combination of keys, differ ent views, and situation-specific, customizable menus allows you to control what y ou see on the color display .
P ow ering Up the Control Head T urn on your Chartplotter by pressing the POWER/LIGHT key . The T itle screen is displa yed until the Chartplotter begins operation. After the T itle screen is display ed, a 30 second Navigation W arning screen is shown.
What’s On the Displa y The 1100 Series™ Chartplotter can displa y a variety of useful information. Chart Bir d's Eye Combo V iew 22 Cursor Info Box: indicates the Latitude and Longitude of the cursor position, the distance to travel to the cursor position and the bearing to the cursor position is shown with a GPS receiver .
23 is shown with navigation active. T rack: Detailed position history , displayed as a breadcrumb trail of trackpoints. Cartography Map Scale Selectable Readout Boxes Course: the current direction the boat is traveling measured in degrees from North.
Ke y Functions Y our 1100 Series™ user interface consists of a set of easy-to-use keys that w ork with various on-screen views and menus to give you flexibility and contr ol over y our fishing experience.
MENU Ke y The MENU k ey is used to access the menu system. Start-Up Options Menu - Pr ess the MENU key during the po wer up sequence to view the Start -Up Options menu.
EXIT Ke y The EXIT k ey has multiple functions, depending on the situation: • If an alarm is sounding, pressing EXIT will cancel the alarm. • If a menu tab is selected, pressing EXIT will exit the menu mode and return to the view . • If a menu is active, pressing EXIT will return to the pr evious lev el in the menu system.
MARK Ke y Press the MARK key while in an y view to mark the position of a wa ypoint, either at the current boat location, or , if the Cur sor is active, at the current Cursor location. The MARK k ey only functions if you ha ve the GPS receiver connected, or if y ou have enabled Screen Snapshot from the Accessories menu tab.
Vi ew s The vie ws available on y our 1100 Series™ are: GPS Diagnostic Vie w is the def ault view until GPS communications are established. At that point, all the other views become available. W hen the VIEW key is pr essed, the display cycles through the a vailable views.
Bird's Ey e No Readouts V iew Bird's Eye No Readouts V ie w shows a 3D per spective view like all the other Bir d's Eye V iews, but without readouts.
Route 5 T rack 6 Boat Icon 7 Bird's Eye No Readouts V iew (Na vigating) 1 2 3 4 Cartography 1 Waypoint 2 Arrival Alarm Limits 3 Off Course Limits 4 5 7 6 30.
Bird's Ey e V iew Bird's Eye V ie w shows a 3D per spective view of the tr ack and the chart land contour from a point above and behind the boat (the eye point). As the boat turns, the eye point mov es to follow the boat. W hen you press the 4-W A Y Cursor key in any of the Bird’s Eye V ie ws, the position of the eye point will shift.
NO TE: If there is only one wa ypoint in a route, the Next W aypoint and the End W aypoint inf o boxes will display the same information. Bearing: Direction to Destination Waypoint measured in degrees from North 3 Course: the current direction the boat is traveling measured in degrees from North.
Chart/Bird’s Ey e Combo V iew Chart/Bird’s Eye Combo V ie w shows both the Chart and Bird’s Eye vie ws in a combination split screen. Y ou can perform any of the functions for either of these vi.
Bearing: Direction to Destination Waypoint measured in degrees from North 3 Course: the current direction the boat is traveling measured in degrees from North. 2 Next Waypoint 1 Speed: the measurement of the boat’s progress across a given distance; the speed measurement provided by GPS.
Chart/Chart Combo V iew Chart/Chart Combo Vie w sho ws two versions of the Chart vie w in a combination split screen, so that you can see the position of the boat on one side while you zoom in or perform other functions on the other .
NO TE: All views except the Bird's Eye/Chart Instrument V iew share the same set of 5 selectable r eadouts that can all be set one way f or navigation mode and another wa y for non-navigation mode. W hen you change the readout displays on one of these vie ws, you also are changing them on all the other views that shar e the same configuration.
Chart No Readouts V iew Chart No Readouts Vie w shows cartograph y like all the other Chart V iews, but without r eadouts. See Chart Vie ws f or more information.
Map Scale Route 1 Cartography 2 Course Projection Line 3 Next Waypoint 4 5 Boat Icon 6 T rack 7 Chart No Readouts Vie w (Navigating) 1 2 3 4 5 6 7 38.
Chart V iew Chart Vie ws - T he standard Chart, Chart No Readouts, and Chart/Chart Combo V iews, as w ell as the Chart side of the Chart/Bird's Eye Combo V ie w and the Chart/Bird's Eye Combo Instrument V ie w , all show cartography from the built -in UniMap™ or an optional MMC/SD map for the ar ea surrounding your curr ent position.
NO TE: All views except the Bird's Eye/Chart Instrument Vie w share the same set of 5 selectable readouts that can all be set one wa y for na vigation mode and another way f or non-navigation mode. When you change the readout displa ys on one of these views, you also ar e changing them on all the other views that share the same configur ation.
NO TE: Y ou may also choose Chart No Readouts V iew if you pref er . Bearing: Direction to Destination Waypoint measured in degrees from North 3 Course: the current direction the boat is traveling measured in degrees from North.
Chart Instrument V iew Chart Instrument Vie w displays a digital panel at the top of the screen. T his view pro vides a digital compass, XTE graphic, and up to 10 readouts. NO TE: Only the standard configuration r eadouts are shown in the gr aphics. Readouts can be customized to suit your needs.
NO TE: If there is only one wa ypoint in a route, the Next W aypoint and the End W aypoint inf o boxes will display the same information, both for that next w aypoint.
Chart/Bird's Ey e Instrument V iew Chart/Bird's Eye Instrument V ie w displays a digital instrument panel at the top of the scr een. This vie w provides a digital compass, XTE graphic, and up to 10 r eadouts. NO TE: Only the standard configuration r eadouts are shown in the gr aphics.
NO TE: If there is only one wa ypoint in a route, the Next W aypoint and the End W aypoint inf o boxes will display the same information, both f or that next wa ypoint. Bearing: Direction to Destination Waypoint measured in degrees from North 1 Course: the current direction the boat is traveling measured in degrees from North.
Screen Snapshot V ie w Screen Snapshot V iew displays and allows you to view scr een snapshot thumbnails captured to an optional-purchase MMC/SD card installed in your unit. In addition, when y ou are in the Screen Snapshot V iew , Delete Image and Delete All Images are added to the X-Pr ess™ menu.
For more inf ormation, see Accessories Menu T ab: Using Screen Snapshot and Scr een Snapshot X -Press™ Menu . W aypoint T humbnails: On the Chart Vie w , you can use the INFO k ey to view Screen Snapshot as W aypoint thumbnails. W aypoints thumbnails are cr eated while the Snapshot feature is turned on.
When you start a scr een snapshot, you will see a message that a waypoint has been cr eated at the point where your cursor is on the scr een, and the screen will freez e while the snapshot is being saved to the MMC/SD card.
Chart Orientation All the chart views allow you to choose the orientation of the chart. W hen North-Up orientation is selected, T rue North is shown at the top of the display . In other w ords, objects located to the north of the boat are dra wn above the boat.
V iewing Cartogr aphy In the Chart or Combo Vie ws, there are sev eral cartograph y-related functions that y ou can access using various keys. Panning: Use the 4-W A Y Cursor keys to mov e the chart around on the display in the direction of the k ey being pressed.
Chart Info: Use the INFO ke y to get detailed information about the chart. If the cursor is active, y ou will see information about the chart objects located near the cursor .
Introduction to Na vigation Use the 1100 Series™ to establish waypoints at areas of inter est and to navigate to those wa ypoints via a saveable route (r epresenting the shortest intended distance between w aypoints). Y ou can also view and save tracks, which r epresent the actual path of the boat.
Routes link two or more wa ypoints together to create a path for na vigation, and are used in trip planning. Y ou can link individual waypoints together by using the GO T O key . A route represents your intended navigation and shows the shortest path from each w aypoint to the next.
T o make it easier to select a waypoint, select Sort By and press the RIGHT or LEFT Cursor k eys to select a sort order: • Name shows the waypoints alphabetically • Time sho ws the most recently-cr eated waypoint fir st • Distance shows the closest waypoint fir st.
Add a W aypoint T arget or T rolling Grid Add or Remove a W a ypoint T arget: F rom the W aypoints submenu (accessed fr om the Navigation main menu), select T arget and press the RIGHT Cursor key to displa y a list of waypoints. Select the wa ypoint you want to target.
Add or Remove a T rolling Grid: From the W aypoints submenu (accessed fr om the Navigation main menu), select Grid and press the RIGHT Cursor ke y to display a list of wa ypoints.
Sav e, Edit or Delete a Route Save the curr ent route: While you are navigating, the curr ent route can be sav ed. From the Navigation X -Press™ Menu, select Sav e Current Route and press the RIGHT Cursor k ey .
Edit, Delete or Hide Sav ed T racks Display the T racks Submenu: F rom any view , press the MENU key twice to display the Main Menu System, then use the RIGHT Cursor key to select the Na vigation tab. Select T racks and press the RIGHT Cursor key to displa y the T racks submenu.
Activate MOB navigation: Press and hold the GOT O key f or more than 1.5 seconds to activate the Man Overboard (MOB) function. Cancel MOB navigation: From the Navigation X -Press™ menu, select Cancel MOB and pr ess the RIGHT Cursor key .
T he Menu System The menu system is divided into easy -to-use menu modules. T he main components of the menu system are: Start-Up Options Menu: Press the MENU k ey during the power up sequence to vie w the Start-Up Options menu. See Start-Up Options Menu.
QUICK TIPS: • When your cursor is within a menu tab, press the EXIT ke y to jump directly to the top of the tab. • If you are at the bottom of a menu tab, press the DOWN Cursor ke y to jump directly to the top of the tab.
Setup T ab, Normal User Mode Setup T ab, Advanced User Mode 62.
Start -Up Options Menu Press the MENU key when the T itle scr een is displayed to access the Start -Up Options menu. Use the UP or DOWN 4-W A Y Cursor k eys to position the cursor , then the RIGHT Cursor key to select one of the following choices.
Simulator Use the Simulator to learn how to use your 1100 Series™ befor e taking your boat on the water . The Simulator is a very powerful tool that simulates on-the-w ater operation, pro viding a randomly-updated displa y .
Self T est Self T est displays results fr om the internal diagnostic self test, including unit serial number , Printed Circuit Board (PCB) serial number , softw are revision, total hour s of operation and the input voltage. IP and MA C addresses are also display ed.
GPS Diagnostic V iew GPS Diagnostic Vie w , which is only available when a GPS Receiv er is attached to your 1100 Series, shows a sky chart and numerical data from the GPS receiv er . T he sky chart sho ws the location of each visible GPS satellite with its satellite number and a signal strength bar .
Navigation X -Press™ Menu The Navigation X -Press™ Menu provides access to the settings most frequently used. Press the MENU ke y once while in the Navigation V iews (Chart or Bir d's Eye V iews) to access the Navigation X -Press™ Menu.
Active Side Active Side allows you to select which side of a Combo V ie w will be active; key pr esses will only affect the active side of the scr een. When a menu is display ed, the non-active side of the screen will be gray ed out; at any other time, a green arr ow will point to the active side.
T he W a ypoint Submenu contains the following menu choices: Edit allows you to edit the Name, P osition (Latitude and Longitude) and select the Icon that will be used to represent the wa ypoint in the Chart and Combo V iews. Delete allows you to delete a wa ypoint from the list of sav ed waypoints.
Clear Current T r ack Clear Current T rack allows you to clear the current track being displayed and start a new tr ack at the present position. T o Clear Current T r ack: 1. Highlight Clear Current T rack on the Navigation X -Press™ Menu. 2. Use the RIGHT 4-W A Y Cursor Contr ol key to initiate clearing the curr ent track.
Cancel Navigation (Only when navigating) Cancel Navigation discards the curr ent route and exits Navigation Mode. T his menu choice will only appear when you are currently na vigating a route. T his will not delete a previously -saved r oute. T o Cancel Na vigation: 1.
Remov e Grid (Only if a Grid is active) Remove Grid remo ves the waypoint grid fr om the display . This menu choice will only appear when a grid has already been applied to a waypoint. T o Remove a Grid: 1. Highlight Remove Grid on the Navigation X -Press™ Menu.
Select Readouts Select Readouts sets individual digital readouts on all the views that can display readouts. T his featur e allows you to select what information will be displa yed in each of a variab.
NO TE: Y ou can set a second set of 5 readouts with na vigation mode settings as well, so that, when you are navigating, these views contain na vigation data instead of the regular settings. See Navigation X -Pr ess™ menu: Select Nav Readouts f or more information.
T o Select Readouts: 1. Highlight Select Readouts on the Navigation X -Press™ menu. 2. Use the RIGHT 4-W A Y Cursor Contr ol key to initiate this pr ocedure.
Select Nav Readouts Select Nav Readouts sets the individual digital readouts that will be used only during navigation on all non-instrument views. T his featur e allows you to select what information .
Bearing Bearing is the direction to a destination waypoint measured in degrees from North (i.e. 321°, where 000° is North, 090° East, 180° is South, 270° is West). CMG/SMG Course Made Good/Speed Made Good. Course Made Good is the angle between the starting point on a route and the current position of the boat.
Select Instrument Readouts Select Instrument Readouts sets individual digital r eadouts on all of the instrument views. T his feature allo ws you to select what information will be display ed in 8 of .
Chart/Bird's Eye Instrument V iews with 8 Custom Readouts Chart/Bird's Eye Instrument V iews with 8 Def ault Readouts 79.
Screen Snapshot X -Press™ Menu (Screen Snapshot V iew only) The Screen Snapshot X-Pr ess™ menu provides access to the image management functions. Press the MENU key once while in the Screen Snapshot V iew to access the Scr een Snapshot X - Press™ menu.
Navigation Menu T ab Press the MENU key twice to access the Main Menu System, then press the RIGHT cursor ke y to select the Navigation tab. NO TE: Menu choices will vary depending on system settings.
Current T r ack Current T rack allows you to view the Current T rack submenu. T o vie w the Current T r ack Submenu: 1. Highlight Current T rack on the Navigation main menu. 2. Use the RIGHT 4-W A Y Cursor Contr ol keys to view the Curr ent T rack submenu.
T he Sa v ed T r acks Submenu contains the f ollowing menu choices: Edit allows you to select a pre viously-sav ed track and edit its name, whether it is visible or not, and its appearance. Delete allows you to delete a track fr om a list of previously -saved tr acks.
Routes Routes allows you to view the Routes submenu. T o vie w the Routes Submenu: 1. Highlight Routes on the Navigation main menu. 2. Use the RIGHT 4-WA Y Cursor Control keys to vie w the Routes submenu. T he Routes Submenu contains the f ollowing menu choices: Create allows y ou to create a new , empty route and add waypoints to it immediately .
North Refer ence North Reference allows you to have bearings displayed with one of two orientations: T rue North or Magnetic North. T o change the North Ref er ence setting: 1. Highlight North Reference on the Na vigation main menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Contr ol keys to change the North Refer ence setting.
T rack Min Distance (Advanced) T rack Min Distance allows you to set a minimum distance of tr avel befor e a trackpoint is added to the track. NO TE: T rack Min Distance w orks in conjunction with T r ackpoint Interval. Both conditions must be met befor e a trackpoint is added to the current tr ack.
Course Pr ojection Line Course Projection Line allows you to display or hide an arr ow extending from the bow of the boat that projects y our current course, and sho ws where the boat will go if you continue on your present cour se. T o change the Course Project Line setting: 1.
Delete All Nav Data (Advanced) Delete All Nav Data allo ws you to delete all sav ed T racks, Waypoints and Routes. T his menu choice should be used with caution. T o Delete All Navigation Data: 1. Make sure you ar e in Advanced User Mode, then highlight Delete All Nav Data on the Na vigation main menu.
Chart Menu T ab Press the MENU key twice to access the Main Menu System and then press the RIGHT Cursor ke y to select the Chart tab. NO TE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode.
Chart Detail Lev el Chart Detail Level allo ws you to select how much chart detail y ou want displayed on the Navigation V iews. Basic shows land areas, ports, obstructions and restricted areas. Navigation shows nav aids, landmarks, ferrywa ys and navigation routes in addition to the Basic information.
T o change the Lat/Lon Grid setting: 1. Highlight Lat/Lon Grid on the Chart main menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Contr ol keys to change the Lat/Lon Grid setting. (Hidden, V isible, Default = Hidden) Spot Soundings Spot Soundings allo ws you to display or hide spot soundings, which are depth measurements shown on the chart.
Chart Select Chart Select allows y ou to choose what chart to use if you hav e built- in charts or a map card. If you select A uto, your unit will select a chart automatically . T o activ ate or de-activate Chart Select: 1. Highlight Chart Select on the Navigation main menu.
Set Map Offset (Advanced) Set Map Offset allows y ou to change the map offset used by the 1100 Series™. NO TE: The Map Offset will be applied to all maps and not just the map that requires the correction. T he Map Offset should be cleared if a differ ent map is to be used.
Alarms Menu T ab From an y view , pr ess the MENU key twice to access the Main Menu System. The Alarms tab will be the def ault selection. NO TE: When an alarm is triggered, you can silence it by pr essing any key . The alarm will be silenced, and will not be triggered again until a new instance of the alarm condition is detected.
Alarm V olume Alarm V olume allo ws you to adjust the volume of the alarms. T o change the Alarm V olume setting: 1. Highlight Alarm V olume on the Alarms main menu. 2. Use the LEFT or RIGHT 4-WA Y Cur sor Control ke ys to change the Alarm V olume setting.
Off Course Alarm Off Course Alarm sounds when the boat has moved too far off course based on the menu setting when navigating. Off Course Alarm allows y ou to set how far the boat is allowed to mov e off course befor e the Off Course Alarm will sound.
Drift Alarm Drift Alarm sounds when the boat has exceeded the distance from the boat’s anchored position, based on the menu setting. Drift Alarm allows you to set the siz e of a perimeter around the boat’s anchored position; if the anchored boat drifts outside of that perimeter , the Drift Alarm will sound.
Setup Menu T ab From an y view , pr ess the MENU key twice to access the tabbed Main Menu System, then press the RIGHT cursor ke y until the Setup tab is selected. NO TE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode and what accessories are attached to the control head.
Sound V olume Sound V olume allo ws you to control the v olume of all sounds emitted by the control head (except for the v olume of the alarms, which is controlled by Alarm V olume). T o change the Sound V olume setting: 1. Highlight Sound V olume on the Setup main menu.
Units - Speed (with Speed input only) Units - Speed selects the units of measure f or speed-related readouts. T o change the Units - Speed setting: 1. Highlight Units - Speed on the Setup menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Control keys to change the Units - Speed setting.
Restore Def aults Restore Defaults resets ALL menu settings to their factory defaults. Use this menu choice with caution! T o Restore Defaults: 1. Highlight Restore Defaults on the Setup menu. 2. Use the RIGHT 4-W A Y Cursor Contr ol key to initiate r estoring defaults.
Daylight Sa ving T ime (Advanced) Daylight Saving T ime adjusts the time display to account for local Daylight Saving T ime. Selecting On adds one hour to the time display adjusted for your local time z one. Selecting Off leaves the time displa y as adjusted for your local time zone.
Date F ormat (Advanced, International only) Date Format changes the date format used by the unit This menu choice is av ailable only when in Advanced User Mode (see Setup Menu T ab: User Mode.
NMEA Output (Advanced) NMEA Output turns the NMEA output on or off . T his menu choice is available only when in Adv anced User Mode (see Setup Menu T ab: User Mode .
IP Address Setup IP Address Setup allows y ou to set up an Ethernet connection. Use this feature to open a window wher e a dynamic IP address can be selected (your contr ol head will find and update its own address) or a static IP address (wher e you set the address manually).
V iews Menu T ab From an y view , pr ess the MENU key twice to access the tabbed Main Menu System, then press the RIGHT 4-W A Y Cur sor Control key until the V ie ws tab is selected. This menu tab allo ws you to set the available views to either hidden or visible in the vie w rotation.
Accessories Menu T ab From an y view , pr ess the MENU key twice to access the tabbed Main Menu System, then press the RIGHT cursor key until the Accessories tab is selected. If no accessories are attached to the Accessory Bus, no accessory menu choices will appear under the Accessories tab, only the Screen Snapshot menu choice.
Using Screen Snapshot Screen Snapshot activates the screen snapshot function. W hen Screen Snapshot is enabled, pressing the MARK ke y creates a sav ed screen capture on the optional- purchase MMC/SD card installed in your unit’s car d slot. All menus, dialog boxes, warnings and messages are captured and sav ed automatically .
T o vie w screen snapshots: 1. Make sure that the optional-purchase MMC/SD car d used to capture the screen is installed in your card slot. 2. Press the VIEW key until y ou see the Screen Snapshot V iew . 3. Y ou can scroll through the whole list of captures in this view using the 4-W A Y Cursor keys.
T roubleshooting Before contacting the Humminbird® Customer Resour ce Center , please read the f ollowing section. T aking the time to review these tr oubleshooting guidelines may allow y ou to solve a performance problem yourself , and therefor e avoid sending y our unit back for repair .
Display Pr oblems Ther e are sev eral main conditions or sources of possible interfer ence that may cause problems with the quality of the information displayed on the contr ol head.
1- Y ear Limited W arranty W e warrant the original r etail purchaser that products made by Humminbir d® have been manuf actured free from defects in materials and w orkmanship. T his warranty is effectiv e for one year from the date of original retail purchase.
Humminbird® Service P olicy Even though you'll probably ne ver need to take adv antage of our incredible service policy , it's good to know that we back our products this confidently .
Returning Y our Unit for Service Before sending your unit in f or repair , please contact the factory , either by phone or by email, to obtain a Repair Authorization Number for y our unit. Please have your pr oduct model name and serial number available befor e calling the factory .
1100 Series™ Chartplotter Accessories Accessories customize the 1100 Series™ to your needs and enable you to sta y on the edge of new technology . When an accessory is connected to the 1100 Series™, additional menus and readouts are added automatically to the Main Menu System.
116 Specifications Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .600 V x 800 H; 10.4” Diagonal 4:3 Color TFT Unit Size (Gimbal Mount) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13.1”W x 9.
117 Glossary Acquisition Time: The length of time that a GPS receiv er typically takes to determine a position from at least three satellites. Humminbird® GPS receiv ers pro vide very fast acquisition times (under one minute), permitting users to get out on the water faster .
118 Glossary Estimated Position Err or (EPE): Estimated P osition Error is a calculation that indicates the potential position inaccuracy the user may experience due to a variety of GPS f actors which include satellite position in the sky , signal strength and others factors.
119 Glossary Present P osition: Present Position is the current location (latitude, longitude) determined b y GPS. T he Present P osition is indicated on-screen by a dir ectional boat icon if the boat is moving, or a round symbol if the boat is stationary .
120 T rackplotter: T rackplotter describes a na vigation device that shows Pr esent Position, along with T rack, W aypoint, and Routes, but NO MAP in the background. See Chartplotter . T rolling Grid: T rolling Grid is a Humminbird® feature that displays a pr ecise refer ence grid around a waypoint.
121 Contact Humminbird® Contact the Humminbird® Customer Resource Center in any of the follo wing wa ys: By T elephone (Monday - F riday 8:00 a.m. to 4:30 p.m. Central Standar d T ime): 1-800-633-1468 By e-mail (typically we respond to y our e-mail within three business da ys): cservice@johnsonoutdoors.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Humminbird 1155C è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Humminbird 1155C - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Humminbird 1155C imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Humminbird 1155C ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Humminbird 1155C, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Humminbird 1155C.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Humminbird 1155C. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Humminbird 1155C insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
