Manuale d’uso / di manutenzione del prodotto Fitness Equipment del fabbricante Huffy
Vai alla pagina of 22
1 2/05 P/N 211017 Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-632 7921 Internet Address: http://www.
2 P/N 211017 2/05 201246 1 1/04 In the U.S.:1-800-558-5234 and Canada: 1-800-284-8339 F AILURE TO FOLLOW THESE W ARNINGS MA Y RESUL T IN SERIOUS INJUR Y AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system.
3 2/05 P/N 211017 204583 12/04 MOVING SYSTEM HEIGHT ADJUSTMENT TO ADJUST BACKBOARD: 1. Grasp handle and press button. 2. Raise or lower to desired height. 3. Release button. SAFETY INSTRUCTIONS Most injuries are caused by misuse and/or not following instructions.
4 P/N 211017 2/05 For more information on assembly, placement, proper use, and maintenance, visit The American Basketball Council website at http://www.smarthoops.com. IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p art s are p acked inside.
5 2/05 P/N 211017 Get to know the basic parts of your basketball system... SUPPORT STRUT BACK VIEW RIM BASE POLE ELEV A TOR ADJUSTMENT BACKBOARD BACKBOARD FRONT VIEW RIM POLE ELEV A TOR ADJUSTMENT SUP.
6 P/N 211017 2/05 WARRANTY CARD: Please remember to complete your product registration form either on-line at: www.huffysports.com/warrantycard or mail-in the enclosed postcard . WARNING: IF YOUR SYSTEM IS EQUIPPED WITH AN ACRYLIC BACKBOARD, EXAMINE BACKBOARD FOR ANY DAMAGE THAT MAY HAVE OCCURRED DURING SHIPMENT.
7 2/05 P/N 211017 * You may have extra parts with this model. HARDW ARE IDENTIFIER (BOL TS & PINS) HARDW ARE IDENTIFIER (NUTS & W ASHERS) Item #8 (1) Item #12 (6) Item #13 (2) Item #15 (6)* It.
8 P/N 211017 2/05 Item #32 (1) Item #31 (1) HARDW ARE IDENTIFIER (STEEL SP ACERS & RODS) HARDW ARE IDENTIFIER (PLASTIC SP ACERS & CLIPS) HARDW ARE IDENTIFIER (OTHER) Item #7 (1) Item #17 (2) I.
9 2/05 P/N 211017 ITEMS REQUIRED FOR THIS SECTION SECTION A: ASSEMBLE THE BASE 1. Correctly identify each pole section. Poles have an identification sticker that will be used as a reference point in the next step.
10 P/N 211017 2/05 3. While maintaining alignment, bounce assembly and bottom pole section (6) together as shown until they no longer move toward identification sticker . 5 4 While maintaining alignment, bounce pole top (4) and middle section (5) together as shown until they no longer move toward identification sticker .
11 2/05 P/N 211017 Install wheel axle (2) through wheel carriage (19) and inst all wheels (3) onto wheel axle (2) with spacers (17) as shown. Insert pole assembly into t ank assembly as shown. Secure bottom pole (6) section to tank and wheel carriage as shown.
12 P/N 211017 2/05 11 12 12 10 6 6 10 1 10 13 6. Secure flat end of tank strut s (10) to pole using bolt (1 1), washers (12), and nut (13), as shown. Rotate the non-secured angled ends of the struts (10) as shown. 7. Secure tank strut s (10) to the base using bolt (15), washers (12), and nut (16).
13 2/05 P/N 211017 This is what your system will look like when you’ve finished this section. (2) 1/2”, (2) 9/16” AND (2) 3/4” W renches 9/16” 1/2” 3/4” (2) Socket Wrenches and Socket s .
14 P/N 211017 2/05 Attach lower elevator tubes (41) and spring (44) to backboard bracket s (29) using spacers (37) bolt (43) and nut (39) as shown. Insert T -bolt (36) through Slam Jam bracket (32) as shown. Secure Slam Jam bracket (32) and backboard bracket (29) assemblies to backboard.
15 2/05 P/N 211017 43 37 37 39 42 42 4. Attach upper elevator tubes (42) to backboard bracket s (29) using spacers (37) bolt (43) and nut (39) as shown. 39 42 42 43 43 41 39 22 4 41 5 . Support pole on sawhorse. Att ach upper and lower elevator tubes (41 and 42) to upper pole section (4) using bolts (43) and nut s (39) as shown.
16 P/N 211017 2/05 43 48 48 46 39 41 7. Attach adjustment tube (46) assembly to lower elevator tubes (41) using bolt (43) spacers (48) and nut (39) as shown. 46 47 6. Slide inner adjustment tube (47) into outer tube assembly (46) until it snaps in place about midway inside the outer tube assembly (46).
17 2/05 P/N 211017 13 18 27 47 8. Attach the inner adjustment tube (47) to pole mount bracket (27) using bolt (18) and nut (13) as shown. 47 46 TIGHTEN BOL T (18) IN LOCK NUT (13) UNTIL FLUSH (EVEN) WITH LOCK NUT’S OUTER EDGE. W ARNING! DO NOT LEA VE ASSEMBL Y UNA TTENDED WHEN EMPTY ; IT MA Y TIP OVER.
18 P/N 211017 2/05 9. 31 40 38 32 36 Inst all Slam Jam Rim to Backboard 21 30 36 38 40 A B C D E A Fit rim (21) securely into bracket (32) as shown. Allow T -bolt (36) to slip through center hole in rim (21). B Install reinforcement bracket (31) onto T -bolt (36) as shown.
19 2/05 P/N 211017 10. Install net clip s (20). CLIP “ARM” CLIP “BODY” Insert one “arm” of clip (20) into ram (21) as shown. T wist “body” of clip slightly so that second “arm” slides over the top of the first “arm” as shown. Push in direction indicated by arrows.
20 P/N 211017 2/05 Insert net (26) into bottom of clip (20) as shown. T wist net (26) until it snaps into position. Net must be centered through clip (20).
21 2/05 P/N 211017 12. 42 42 44 39 43 Insert bolt (43) through left side upper elevator tube (42), then stretch spring (44) onto bolt (43). Insert bolt (43) through right side upper elevator tube (42) and secure with nut (39). USE EYE PROTECTION WHEN INST ALLING SPRINGS.
22 P/N 211017 2/05 13. Roll the completed assembly to the desired playing area. Insert the T -strap (14) through the slot on the back of the base as shown. Secure the unit to ground by twisting the tie down stake (23) into the ground and hooking the T -strap (14) onto the tie down stake (23).
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Huffy Fitness Equipment è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Huffy Fitness Equipment - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Huffy Fitness Equipment imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Huffy Fitness Equipment ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Huffy Fitness Equipment, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Huffy Fitness Equipment.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Huffy Fitness Equipment. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Huffy Fitness Equipment insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
