Manuale d’uso / di manutenzione del prodotto 214953C del fabbricante Huffy
Vai alla pagina of 34
1 12/03 P/N 214953C © COPYRIGHT 2000 by HUFFY SPORTS Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-333 061 Internet Address: http://www.
2 P/N 214953C 12/03 BEFORE YOU ST ART! T o ensure optimal playability of backboard system, a close tolerance fit between the elevator component s and hardware is required. T est-fit large bolt s into large holes of elevator tubes, backboard bracket s, and triangle plates.
12/03 P/N 214953C 3 W ARNING F AILURE T O FOLLOW THESE W ARNINGS MA Y RESUL T IN SERIOUS INJUR Y AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. • DO NO T HANG on the rim or any part of the system including bac kboard, support braces or net.
4 P/N 214953C 12/03 For more information on assembly, placement, proper use, and maintenance, visit The American Basketball Council website at http://www.smarthoops.com. IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p art s are packed inside.
12/03 P/N 214953C 5 2 2 1 3 TO ADJUST BACKBOARD: 1. While holding handle, remove pin. 2. Move elevator up or down to desired height. 3. Replace pin full length to lock system at desired height. 201252 2/99 1 2 4 3 MOVING SYSTEM 1. Adjust basketball backboard height to lowest position.
6 P/N 214953C 12/03 Get to know the basic parts of your basketball system..... HUFFY HUFFY SPORTS S P O R T S SUPPOR T STRUT BACKBOARD FRONT RIM BASE POLE WHEELS ELEV A TOR SYSTEM.
12/03 P/N 214953C 7 P ARTS LIST - See Hardware Identifier P ARTS LIST - See Hardware Identifier Item Qty . Part No. Description 1 1 206336 Tank, (Gray) 2 2 206330 Wheel Axle, 4-1/4 Long 3 2 226401 Wheel, 4 “ (Black) 4 1 904847 Top Pole Section 5 1 908481 Middle Pole Section 6 1 908487 Bottom Pole Section 7 1 202820 Rod, 3/8 O.
8 P/N 214953C 12/03 HARDW ARE IDENTIFIER (BOL TS) * You may have extra parts with this model. Item #8 (1) Item #14 (1) Item #15 (2) Item #18 (2) Item #21 (3) Item #25 (3) Item #30 (2) Item #47 (6) Ite.
12/03 P/N 214953C 9 * You may have extra parts with this model. HARDW ARE IDENTIFIER (STEEL SP ACERS & RODS) HARDW ARE IDENTIFIER (NUTS & W ASHERS) HARDW ARE IDENTIFIER (PLASTIC SP ACERS &.
10 P/N 214953C 12/03 TOOLS REQUIRED FOR THIS SECTION HARDW ARE USED IN THIS SECTION (not actual size) SECTION A : ASSEMBLE THE BASE This is what your system will look like when you’ve finished this .
12/03 P/N 214953C 11 Insert axle rod (2) through wheel (3), as shown. Secure wheel assembly to tank (1) by t apping wheel downward with hammer , snapping it into position. Repeat for opposite side, then carefully , turn t ank (1) over . Remove all contents from underside of tank.
12 P/N 214953C 12/03 IMPORT ANT! Center alignment slot of lower pole section (6) in a lower hole of middle pole section (5) as in step 3. While maintaining alignment, bounce top & middle pole assembly (4 & 5) onto lower pole section (6) as shown until top & middle pole assembly no longer moves toward taped reference mark on bottom pole.
12/03 P/N 214953C 13 Insert pole assembly into tank assembly as shown. Install rod (7) through holes in bottom pole section (6) and eyebolt (8). DO NOT OVER TIGHTEN IMPORT ANT!: DO NOT OVER TIGHTEN IMPORT ANT!: TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
14 P/N 214953C 12/03 1 11 15 16 11 1 13 13 11 12 13 6 14 13 HUFFY HUFFY SPORTS S PO RT S 4 16 18 18 16 17 Secure strut tubes (1 1) to bottom pole section (6) as shown. Once again, carefully place unit in the side position and secure strut (1 1) to tank (1) as shown.
12/03 P/N 214953C 15 19 21 21 19 19 20 20 19 17 22 22 23 23 Attach sp acers (22, 23) to pole mount bracket (17) with bolt s (21), washers (19), and nuts (20) as shown. Tighten just until washers (19) stop moving. IMPORT ANT!: 17 16 26 24 24 27 25 FIG .
16 P/N 214953C 12/03 30 29 16 28 28 Apply logo and height indicator labels (29) to adjustment rod (28) as shown. Attach handle part s (32, 33) to adjustment rod with screw (31), carriage bolt (30), and flange nut (16) as shown. Insert handle assembly through pole mount assembly as shown.
12/03 P/N 214953C 17 TOOLS REQUIRED FOR THIS SECTION HARDW ARE USED IN THIS SECTION (not actual size) SECTION B: ASSEMBLE THE BASE This is what your system will look like when you’ve finished this s.
18 P/N 214953C 12/03 16. 36 20 35 21 34 37 Install sp acers (36) onto backboard bracket s (34) with bolts (37, 21) and lock-nut s (35, 20) as shown. Assemble lower elevator tubes (40) as shown. NOTE: T est fit bolt s into holes of brackets (34) and carefully rock them in a circular motion to ream out paint from holes if necessary 17.
12/03 P/N 214953C 19 S tarting with nut s (16) flush against bracket (34), secure rim (42) and bracket to backboard. Bend bracket (34) to line up with holes in backboard and secure. 18. 19. 34 16 42 16 IMPORT AN T! : For spring loaded rim assembly , refer to instructions included with rim hardware.
20 P/N 214953C 12/03 Assemble upper elevator tubes (43) to backboard brackets (34). SAWHORSE OR SUPPORT TABLE Support pole on sawhorse. Attach backboard assembly to top pole section (4) as shown. Install pole cap (46). USE CAUTION; ELEVATOR ASSEMBLY IS HEAVY.
12/03 P/N 214953C 21 47 39 44 44 28 Before going on to next step, set adjustable system assembly to the 10’ (3.05 m) setting. NOTE: IMPORT ANT!: DO NOT OVER TIGHTEN 40 47 38 40 39 43 38 45 43 23. 22. 39 47 43 43 40 40 38 55 55 38 38 38 Install upper elevator tubes (43) to triangle plates (45) as shown.
22 P/N 214953C 12/03 53 49 52 Roll completed assembly to desired position. Secure assembly to ground using anchor strap (52) and tie down stake (53). Fill t ank with water (approx. 30 gallons/1 15 Liters) or sand (approx. 255 lbs./1 13 kg) and snap cap (49) in place.
12/03 P/N 214953C 23 26 26. 27. 28. HUFFY HUFFY SPORTS S P O R T S 54 10 f t. (3.05 m) While holding handle, remove pin (26). Move elevator up or down to desired height. Replace pin (26) full length to lock system at desired height. Apply height and transport label (54) to front of pole as shown.
24 P/N 214953C 12/03 Install net clips. Attachez les pinces de filet au cerceau, comme illustré. Die Netzhalteklammern wie gezeigt am Korbrand anbringen. Instale los sujetadores de la red en el borde, como se muestra. Insert one “arm” of clip into ram as shown.
12/03 P/N 214953C 25 Install Net Installez le filet. Das Netz anbringen Instale la red. Insert net into bottom of clip as shown. Insérez le filet dans la base de la pince, comme illustré. Das Netz wie gezeigt unten in den Clip stecken. Introduzca la red en la parte inferior del sujetador como se muestra.
26 P/N 214953C 12/03 Numéro d’appel gratuit du service après-vente. Etats-Unis et Canada uniquement: 1-800-284-8339 Numéro vert international (France, Suisse) : 00 800 555 85234 TUFF STUFF® et les marques associées de Mattel, Inc. sont utilisées avec sa permission.
12/03 P/N 214953C 27 Légende Quantité No de réf. Description 1 1 206336 Réservoir, (Gris) 2 2 206330 Axe de Roue, 4-1/4 Long 3 2 226401 Roue, 4 “ (Noir) 4 1 904847 Première Section 5 1 908481 de Poteau Section 6 1 908487 de Poteau de Milieu Section 7 1 202820 de Poteau Inférieure Tringle, 3/8 O D.
28 P/N 214953C 12/03 INSTRUCTIONS IMPORTANT ! NOTEZ À LA PAGE 1 DE CE MANUEL LE NUMÉRO DE MODÈLE MENTIONNÉ SUR LE CARTON. AVANT DE COMMENCER ! Pour garantir l'utilisation optimale du panneau, les composants du système élévateur et la visserie doivent être bien ajustés (serrés).
29 12/03 P/N 214953C 00 800 555 85234 SI NO SE OBSERVAN ESTAS ADVERTENCIAS SE PUEDEN OCASIONAR LESIONES GRAVES Y/O DAÑOS MATERIALES El propietario debe asegurarse de que todos los jugadores onozcan y sigan estas reglas para la operación segura del istema .
30 P/N 214953C 12/03 LISTA DE PIEZAS. Vea el identificador de herraje Artículo Cant. Pieza N.º Descripción 1 1 206336 Tanque, (gris) 2 2 206330 Eje de la Rueda, 4-1/4 Largo 3 2 226401 Rueda, 4 “ 1 904847 Sección Primera de Asta (negro) 5 1 908481 Sección Mediana de Asta 6 1 908487 Sección Inferiora de Asta 7 1 202820 Barra, 3/8 O.
12/03 P/N 214953C 31 INSTRUCCIONES ¡IMPORTANTE! ANOTE EN LA PÁGINA 1 DE ESTE MANUAL DEL PROPIETARIO EL NÚMERO DE MODELO QUE APARECE EN LA CAJA. ¡ANTES DE COMENZAR! Para asegurar el óptimo rendimiento del sistema del respaldo en el juego, se requiere un ajuste de tolerancia estrecha entre los componentes del elevador y el herraje.
32 P/N 214953C 12/03 Universelle gebührenfreie Telefonnummer (Deutschland, Schweiz): 00 800 555 85234 SICHERHEITSHINWEISE Die meisten Verletzungen werden durch einen unvorschriftsmäßigen Gebrauch und/oder ein Mißachten der Sicherheitshinweise verursacht.
12/03 P/N 214953C 33 TEILELISTE - Siehe Teileschlüssel Artikel Menge Teilenummer Beschreibung 1 1 206336 Tanks, (Grau) 2 2 206330 Räder Achse, 4-1/4 Langes 3 2 226401 Rad, 4 “ (Schwarz) 4 1 904847 Oberste Stange Abschnitt 5 1 908481 Mittlere Stange Abschnitt 6 1 908487 Untere Stange Abschnitt 7 1 202820 Ruten, 3/8 O D.
34 P/N 214953C 12/03 GEBRAUCHSANLEITUNG WICHTIG! NOTIEREN SIE SICH DIE MODELLNUMMER AUS DEM KÄSTCHEN AUF SEITE 1 DIESES BENUTZERHANDBUCHS VORBEREITENDE MASSNAHMEN Um sicherzustellen, dass das Korbwan.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Huffy 214953C è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Huffy 214953C - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Huffy 214953C imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Huffy 214953C ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Huffy 214953C, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Huffy 214953C.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Huffy 214953C. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Huffy 214953C insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
