Manuale d’uso / di manutenzione del prodotto 7750 del fabbricante HP (Hewlett-Packard)
Vai alla pagina of 32
CH A P T E R 5-1 Cisco ICS 7750 Installation and Configuration Guide 78-14165-03 5 Operating the Cisco ICS 7750 This chapter e xplains ho w to operat e the Cisco Inte grated Communication s System 7750 (Cisco ICS 7750) after ini tial confi guration is complete.
Chapter 5 Operating the Cisco ICS 7750 Accessing the System 5-2 Cisco ICS 7750 Installation and Configuration Gui de 78-14165-03 • Accessing SPE310s, page 5-8 • Best Practices fo r Using Microsof .
5-3 Cisco ICS 7750 Installation and Configuration Guide 78-14165-03 Chapter 5 O perating the Cisco ICS 7750 Accessing the System associated with transmitting v oice traf fic o ver an IP network. F or additional information, see the “ Ac cessing Cisco CallManager” se ction on page 5-8 .
Chapter 5 Operating the Cisco ICS 7750 Accessing the System 5-4 Cisco ICS 7750 Installation and Configuration Gui de 78-14165-03 Accessing ICSConfig Follo w these steps to access ICSConfig. Note This section describes ICSCon fig functio nali ty after initial conf iguration is complete.
5-5 Cisco ICS 7750 Installation and Configuration Guide 78-14165-03 Chapter 5 O perating the Cisco ICS 7750 Accessing the System When you ha ve installed and con figured your system as described in Ch.
Chapter 5 Operating the Cisco ICS 7750 Accessing the System 5-6 Cisco ICS 7750 Installation and Configuration Gui de 78-14165-03 – Fan Manager—En ables you to vie w and update information related to the planned replacement of the fan tray .
5-7 Cisco ICS 7750 Installation and Configuration Guide 78-14165-03 Chapter 5 O perating the Cisco ICS 7750 Accessing the System Determining the ICS System Manager Version The ICS System Manag er bundle v ersion numb er is displayed on the System Manager home page, in a box just under the grap hic representation of the system chassis.
Chapter 5 Operating the Cisco ICS 7750 Accessing the System 5-8 Cisco ICS 7750 Installation and Configuration Gui de 78-14165-03 Accessing Cisco CallManager Y ou can insta ll Cisco CallManager on SPE3.
5-9 Cisco ICS 7750 Installation and Configuration Guide 78-14165-03 Chapter 5 O perating the Cisco ICS 7750 Accessing the System • Accessing the Cisco IOS CLI on ASIs , MRPs, and the SSP Through T e.
Chapter 5 Operating the Cisco ICS 7750 Accessing the System 5-10 Cisco ICS 7750 Installation and Configuration Gui de 78-14165-03 Note For a list of USB peripherals th at hav e been tested on the Cisco ICS 7750, see the “Using Peripherals with SPE310s” section o n page 5-19 .
5-11 Cisco ICS 7750 Installation and Configuration Guide 78-14165-03 Chapter 5 O perating the Cisco ICS 7750 Accessing the System Accessing SPE310s Through Telnet Y ou can access SPE310s through T elnet, as follows: Step 1 On a PC, choose Start > Run .
Chapter 5 Operating the Cisco ICS 7750 Accessing the System 5-12 Cisco ICS 7750 Installation and Configuration Gui de 78-14165-03 Step 3 Enter your login passw ord.
5-13 Cisco ICS 7750 Installation and Configuration Guide 78-14165-03 Chapter 5 O perating the Cisco ICS 7750 Accessing the System Step 3 Open a connec tion with the S AP , as follows : • If you already ha ve a Hy perT erminal connection def ined for the SAP , choose File > Open , and double-click the appropriate icon.
Chapter 5 Operating the Cisco ICS 7750 Accessing the System 5-14 Cisco ICS 7750 Installation and Configuration Gui de 78-14165-03 Step 4 Press Ctrl-backslash ( ). A menu similar to the follo wing is displayed: A. System Alarm Processor B. MASTER System Processing Engine C.
5-15 Cisco ICS 7750 Installation and Configuration Guide 78-14165-03 Chapter 5 O perating the Cisco ICS 7750 Accessing the System Best Practices for Configuring DHCP Cisco Network Re gistrar (CNR) is .
Chapter 5 Operating the Cisco ICS 7750 Accessing the System 5-16 Cisco ICS 7750 Installation and Configuration Gui de 78-14165-03 Installing or Enabling a DH CP Server on Other SPE310s or Other Servers Do not install or enable a DHCP server on the SPE3 10 that is running System Manager .
5-17 Cisco ICS 7750 Installation and Configuration Guide 78-14165-03 Chapter 5 O perating the Cisco ICS 7750 Accessing the System T o enable ICS System Manager to properly func tion as a system manage.
Chapter 5 Operating the Cisco ICS 7750 Accessing the System 5-18 Cisco ICS 7750 Installation and Configuration Gui de 78-14165-03 • SNMP settings – Changing read-only and read/write SNMP community.
5-19 Cisco ICS 7750 Installation and Configuration Guide 78-14165-03 Chapter 5 O perating the Cisco ICS 7750 Accessing the System Saving Configuration Changes T o pre vent loss of the A SI or MRP conf.
Chapter 5 Operating the Cisco ICS 7750 Accessing the System 5-20 Cisco ICS 7750 Installation and Configuration Gui de 78-14165-03 Note USB de vices requiring additio nal software or installation of non-nati ve W indows 2000 dri v ers will probably not wo rk with the Cisco ICS 7750.
5-21 Cisco ICS 7750 Installation and Configuration Guide 78-14165-03 Chapter 5 O perating the Cisco ICS 7750 Accessing the System Note If you fail to use the U nplug or Eject Hardware too l and if you plug in and unplug the CD-R OM dri ve man y times, the dri ve may stop responding.
Chapter 5 Operating the Cisco ICS 7750 Accessing the System 5-22 Cisco ICS 7750 Installation and Configuration Gui de 78-14165-03 Monitors The follo wing are best practices fo r using a monitor with SPE310s: • Connecting a monitor—Connect t he monitor cable to the SPE310 video port before turning on th e monitor .
5-23 Cisco ICS 7750 Installation and Configuration Guide 78-14165-03 Chapter 5 O perating the Cisco ICS 7750 Backing Up System Data Step 5 Enter the follo wing co mmand: ipconfig /all Output is displayed that in cludes information simi lar to the follo wing: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix .
Chapter 5 Operating the Cisco ICS 7750 Backing Up S ystem Data 5-24 Cisco ICS 7750 Installation and Configuration Gui de 78-14165-03 Note The backup procedures in this section do not cov er other software that you can install on the system, suc h as Cisco Call Manager .
5-25 Cisco ICS 7750 Installation and Configuration Guide 78-14165-03 Chapter 5 O perating the Cisco ICS 7750 Backing Up System Data Accessing the Backup Utility Follo w these steps to access the bac kup utility in ICS System Manager: Step 1 On a PC, access ICS System M anager (see the “ Accessing ICS System Manager” section on page 5-4 ).
Chapter 5 Operating the Cisco ICS 7750 Backing Up S ystem Data 5-26 Cisco ICS 7750 Installation and Configuration Gui de 78-14165-03 c. IP/Hostname—The IP address or h ost name of the de vice on which yo u want to store your back up files.
5-27 Cisco ICS 7750 Installation and Configuration Guide 78-14165-03 Chapter 5 O perating the Cisco ICS 7750 Backing Up System Data Step 6 Click Submit to accept the backup para meters that you speci fied. Step 7 Click History . The Backup Hist ory page disp lays.
Chapter 5 Operating the Cisco ICS 7750 Backing Up S ystem Data 5-28 Cisco ICS 7750 Installation and Configuration Gui de 78-14165-03 f. Password—The password that you use to gain access to the remote computer . g. Domain Name—(optional) The domain n ame that you use to gain access t o your networ k (for example, My Company_Eng).
5-29 Cisco ICS 7750 Installation and Configuration Guide 78-14165-03 Chapter 5 O perating the Cisco ICS 7750 Backing Up System Data d. Copy and p aste the output from the sho w startup-conf ig command in to a text file w here you stored your backup fi les: – Choose Start > Run .
Chapter 5 Operating the Cisco ICS 7750 Setting Security Privileges 5-30 Cisco ICS 7750 Installation and Configuration Gui de 78-14165-03 page 5-27 , and hostna me is the host name of the card. For example, an SSP configuration f ile could be named Backup1_Switch, and an MRP300 config uration fi le could be named Backup1_R00f f ff 900073.
5-31 Cisco ICS 7750 Installation and Configuration Guide 78-14165-03 Chapter 5 O perating the Cisco ICS 7750 Shutting Down the System Shutting Down the System This section descri bes how to shut down t he system. Caution If your system has only one SPE310, mak e sure that the system data has been backed up before you remo ve an operati onal SPE310.
Chapter 5 Operating the Cisco ICS 7750 Shutting Down the System 5-32 Cisco ICS 7750 Installation and Configuration Gui de 78-14165-03 Step 11 Click the Shutdown ICS 7700 System b utton. Step 12 Press the po wer switch to of f (o) on the p ower supp ly modules.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il HP (Hewlett-Packard) 7750 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del HP (Hewlett-Packard) 7750 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso HP (Hewlett-Packard) 7750 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul HP (Hewlett-Packard) 7750 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il HP (Hewlett-Packard) 7750, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del HP (Hewlett-Packard) 7750.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il HP (Hewlett-Packard) 7750. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo HP (Hewlett-Packard) 7750 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.