Manuale d’uso / di manutenzione del prodotto 72H3482 del fabbricante HP (Hewlett-Packard)
Vai alla pagina of 41
T urbo16/4 T oken Ring Network ISA Adapter 72H3482 Installation Guide.
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Server Windows for Workgroups Requirements • HP Vectra VL8 with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.
1 Connecting to a Netware 3.12 Server Windows for Workgroups ❒ NetWare Client-32 ❒ NetBIOS ❒ IEEE 802.2 8 Select the Continue button. 9 At the “IBM LAN Client Configuration” screen, use the defaults and select the Install button. 10 Insert disks 2 – 4 when prompted.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 7 Reboot the machine and allow it to boot to Windows 95. 8 Windows 95 SR2 should automatically recognize the IBM Auto 16/4 TR adapter card. If you are using a Vectra VL8, go directly to step 9. If you are using a Vectra VE7/VE8, follow the instructions below to complete the installation.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 “Workgroup”, and “Computer Description” and click on “OK.” (If you do not have a Computer name, Workgroup name and Computer description, contact your network administrator) 16 When prompted for your Windows 95 CD-ROM, click on “OK.
1 Connecting to a Netware 3.12 Server Windows 95 SR2.
2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Server Windows for Workgroups Requirements • HP Vectra VL8 with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.
2 Connecting to a Netware 4.11 Server Windows for Workgroups ❒ NetWare Client-32 ❒ NetBIOS ❒ IEEE 802.2 8 Select the Continue button. 9 At the “IBM LAN Client Configuration” screen, use the defaults and select the Install button. 10 Insert disks 2 – 4 when prompted.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 7 Reboot the machine and allow it to boot to Windows 95. 8 Windows 95 SR2 should automatically recognize the IBM Auto 16/4 TR adapter card. If you are using a Vectra VE7/VE8, follow the instructions below to complete the procedure.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 “Workgroup”, and “Computer Description” and click on “OK.” (If you do not have a Computer name, Workgroup name and Computer description, contact your network administrator) 16 When prompted for your Windows 95 CD-ROM, click on “OK.
2 Connecting to a Netware 4.11 Server Windows 95 SR2.
3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 3 Connecting to a Windows NT 3.51 Server Windows for Workgroups Requirements • HP Vectra with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.
3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 5 Type “/VIEW” and verify the settings as listed above under the heading “Device Configuration.” 6 Make any changes, exit LANAID, and remove the drivers diskette. 7 Reboot the machine to Windows, open the “NETWORK” folder, and double-click the “NETWORK SETUP” icon.
3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 12 Select “IBM Turbo 16/4 Token-Ring ISA Adapter, NDIS2 only” and click on “OK.” 13 Accept the default “Network Drivers” and click on “Close.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 10 When Windows 95 has loaded, click on “Start” then “Settings” and open the “Control Panel.” 11 Double-Click the “Network” icon and click on “Add.” 12 Select to add an “Adapter”, click on “Add” and then click on “Have Disk.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version3.51 Windows NT Workstation Version3.51 Requirements • HP Vectra with Windows NT Workstation 3.51 installed. • IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version3.51 10 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer. 11 Insert the Windows NT Workstation CD. 12 In “Windows NT Setup”, set the path to your NT files and click on the “Continue” button.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version3.51 25 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version3.51.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 Windows NT Workstation Version 4.0 Requirements • HP Vectra VL8 with Windows NT Workstation 4.0 installed. • IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 10 In the Network Setup Wizard dialog box, make sure that “Wired to the Network” is checked and click on “Next”.
4 Connecting to a Windows NT 4.0 Server Windows for Workgroups 4 Connecting to a Windows NT 4.0 Server Windows for Workgroups Requirements • HP Vectra with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.
4 Connecting to a Windows NT 4.0 Server Windows for Workgroups 5 Type “/VIEW” and verify the settings as listed above under the heading “Device Configuration.” 6 Make any changes, exit LANAID, and remove the drivers diskette. 7 Reboot the machine to Windows, open the “NETWORK” folder, and double-click the “NETWORK SETUP” icon.
4 Connecting to a Windows NT 4.0 Server Windows for Workgroups on “OK.” 13 Accept the default “Network Drivers” and click on “Close.” • IBM Token-Ring ISA Adapter, NDIS2 only [NDIS2] • Microsoft NetBEUI • IPX/SPX Compatible Transport with NetBIOS 14 At the “Network Setup” dialog box, click “OK.
4 Connecting to a Windows NT 4.0 Server Windows for Workgroups.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 7 Reboot the machine and allow it to boot to Windows 95. 8 Windows 95 SR2 should automatically recognize the IBM Auto 16/4 TR adapter card. If you are using a Vectra VL8, go directly to step 9. If you are using a Vectra VE7/VE8, follow the instructions below to complete the installation.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 “Workgroup”, and “Computer Description” and click on “OK.” (If you do not have a Computer name, Workgroup name and Computer description, contact your network administrator) 16 When prompted for your Windows 95 CD-ROM, click on “OK.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version3.51 Windows NT Workstation Version3.51 Requirements • HP Vectra VL8 with Windows NT Workstation 3.51 installed. • IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version3.51 10 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer. 11 Insert the Windows NT Workstation CD. 12 In “Windows NT Setup”, set the path to your NT files and click on the “Continue” button.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version3.51 25 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 Windows NT Workstation Version 4.0 Requirements • HP Vectra VL8 with Windows NT Workstation 4.0 installed. • IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 10 In the Network Setup Wizard dialog box, make sure that “Wired to the Network” is checked and click on “Next”.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 26 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0.
.
V ersion Number IBM T urbo 16/4 Rev .1.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il HP (Hewlett-Packard) 72H3482 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del HP (Hewlett-Packard) 72H3482 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso HP (Hewlett-Packard) 72H3482 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul HP (Hewlett-Packard) 72H3482 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il HP (Hewlett-Packard) 72H3482, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del HP (Hewlett-Packard) 72H3482.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il HP (Hewlett-Packard) 72H3482. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo HP (Hewlett-Packard) 72H3482 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
