Manuale d’uso / di manutenzione del prodotto 2511X del fabbricante HP (Hewlett-Packard)
Vai alla pagina of 47
2011x/2011s 2211f/2211x 2311cm/2311f/2311x 2511x 2711x LCD Monitors User Guide.
© 2010, 2011 Hewlett-Packard Development Company, L.P. Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license.
About This Guide This guide provides information on safety and main tenance, setting up the LCD monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that fail ure to follow directions could result in bodily harm or loss of life.
iv About This Guide ENWW.
Table of contents 1 Product Features ................... ........................... ...................... ........................ ............... .... 1 LCD Monitors ... ............... ................ .................... ................. ......
Appendix A Troubleshooting ....................................... ........................... .......................... . 26 Solving Commo n Problems .. .......... ........ .......... .......... ........... ........ ........... ........ ........... .
1 Product Features LCD Monitors Figure 1-1 LCD Monitors The HP LCD (liquid crystal display) monitors have an active matrix, thin-film tr ansistor (TFT) screen with an LED backlight and the following f.
● Dynamic contrast ratio (DCR) to provide de eper blacks and brighter whites for brilliant shading effects while gaming or watching movies ● External USB powered speakers with audio cable provided.
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If anothe r cord is used, be sure t hat the power source and connection are appropriate for this monito r. For information on the correct power cord set to use with the monitor, see Power Cord Set Requirements on page 38 .
● Install the monitor near a power outlet that yo u can easily reach. Di sconnect the monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord. ● Do not allow anything to rest on the power cord.
Cleaning the Monitor CAUTION: Spray the cleaner on a c loth and use the damp cloth to gently wipe the screen surface. Never spray the cleaner directly on the screen surf ace.
3 Setting Up the Monitor Unpacking the Monitor 1. Unpack the monitor. M ake sure all contents are included. Store t he packing box. 2. Turn off the computer and other attached devices.
3. Slide the hinge bracket on the monitor into the op ening on top of the pedestal. The panel will click into place when fully inserted. Figure 3-2 Inserting the Monitor Panel Connecting Monitor Cables CAUTION: Before connecting cables to the monitor, ensure that the computer and monitor are powered off.
Connecting the VGA Video Cable Connect one end of the VGA video cable to the ba ck of the monitor and the other end to the VGA video connector on the computer.
Connecting the DVI-D Vide o Cable (Select Models) Connect one end of the DVI-D video cable to the ba ck of the monitor and the other end to the DVI-D video connector on the computer. You can use this cable only if your computer has a DVI compliant graphics card that is either integrated or instal led.
Connecting the HDMI Cable (Select Models) Connect one end of the HDMI cable to the back of the monitor and the other end connector to the input device. The HDMI cable is in cluded wit h select models. NOTE: The audio stream must be connected directly to external speakers or to an audio receiver.
Connecting the Power Cord 1. Follow all electrical and power warnings WARNING! To reduce the risk of electric sh ock or damage to your equipment: Do not disable the power-cord grounding plug. The groundin g plug is an important safety feature. Plug the power cord into a ground ed (ear thed) electrical outlet.
Installing the Cable Management Clip Install the cable ma nagement clip over the input ca ble and power cord to gath er them together behind the monitor. Figure 3-7 Installing the Cable management Clip High-Bandwidth Digital Content Protection (HDCP) select models Your monitor supports HDCP and can receive high- definition content.
Turning on the Monitor 1. Press the power button on the computer to turn it on. 2. Press the power button on the front of the monitor to turn it on. CAUTION: Burn-in image damage might occur on monito rs that display the same static image on screen for a prolonged period of time.
Adjusting The Tilt For optimal viewing, adjust the screen ti lt to your own preference, as follows: CAUTION: To avoid breakage or other damage, avoid a pplying pressure to the LCD screen while changing the tilt. 1. Face the front of the monitor an d hold the base so that you do not topple the monitor while changing the tilt.
Connecting External Speakers and Audio Cable (Select Models) Use the following procedure to connect the exte rnal speakers to a computer. 1. Turn the computer o n. 2. Connect the audio cable to the audio-speaker co nnector on the computer, and then connect the USB power cable to a USB connector on the computer.
NOTE: The monitor should be moun ted to a Video Electronics Standards Association (VESA) compliant mounting device. 1. If the monitor is installed on th e base, press the button on t he fr ont of the pedesta l and lift the monitor panel from the base.
3. Remove three hinge screws, and then separate th e hinge from the monitor . Figure 3-12 Removing the Hinge Screws 4. Mount the monitor panel on the wall mounting devi ce or swing arm by following the instructions that come with the mounting kit.
4 Operating the Monitor CD Software and Utilities The CD that is included with this moni tor contains drivers and software that you can install on your computer. Installing Drivers If you determine that you need to update the driver s, you can install the monitor driver INF and ICM files from the CD, or download them from the Internet.
Front-Panel Controls Control buttons (repre sented by icons ) are located on the bottom right of the monitor. Button Icon Description Quick View Opens the OSD Quick View menu where you can select a viewing mode which compliments or optimizes the content you are viewing.
NOTE: When a menu is displayed, if the buttons ar e untouched for 30 seco nds (factory default), adjustments and sett ings are saved and the menu closes. OSD Menu Selections The following table lists the on- screen display (OSD ) menu se lections and the ir functional de scriptions.
Icon Main Menu Option s Sub-menu Opti ons Description Auto-Adjustment Automatical ly adjust the screen image. NOTE: This item can only be used with a VGA input signal. Clock Minimizes any vertical bars or strips visible on the screen background. Adjusting the Clock also changes the horizontal screen image (VGA input only).
Icon Main Menu Option s Sub-menu Opti ons Description OSD Transparency Adjust to view the background information through the OSD. OSD Timeout Sets the time in seconds that th e OSD is visible after the last button is pressed. The factory default is 30 seconds.
Icon Main Menu Option s Sub-menu Opti ons Description Bezel Power LED Turns the light (LED ) in the Power button on and off. When set to off, the light will remain off at all times. Sleep Timer Provides the timer-adjustment menu options: ● Set Current Ti me — Sets the current time in hours and minutes.
Icon Main Menu Option s Sub-menu Opti ons Description Default Source Selects the default or primary video input signal when the monitor is connec ted to two active and valid video sources. The monitor will automatically determine the video format. Auto-Switch So urce Turns the au tomatic video signal input to On or Off on the system.
● Dynamic Contrast Ratio OF F — Indicates that DCR has been turned off in the OSD or was automatically turned off after changes were ma de to Brightness or Quick View in the OSD. ● No Input Signal — Indicates the monitor is not receivin g a vide o signal fro m the computer on the monitor video input connector.
A Troubleshooting Solving Common Problems The following table lists possible problems, the po ssible cause of each problem, and the rec ommended solutions: Problem Solution Power button LED is not on. Make sure that the Power button is on, and the power cord is connected to a grounded power outlet and to the monitor.
Problem Solution No Audio. Make sure that the speaker audio cable and USB power cable are connected directly to the computer. NOTE: External speakers are available for select models only. No Plug and Play. In order for the Plug and Play feature of the monitor to work, you need a computer and graphic card that are compatible with Plug an d Play.
Getting Support from hp.com Before you contact customer service, refer to HP Technical Support at: www.hp.com/ support . Select your country/r egion, and then follow the links to the support page for your monitor.
B Technical Specifications All specifications represent the typical specific ations provided by HP component manufacturers; performance might vary either higher or lo wer. HP LCD Monitors Table B-1 2011x/2011s Specifications Specifications Display Type: TFT LCD active matrix Viewable Image Size: 50.
Table B-2 2211f/2211x Specifications Specifications Display Type: TFT LCD active matr ix Viewable Image Size: 54.61 cm (21.5 in) diagonal Video Input Terminals: VGA, DVI, and HDMI NOTE: HDMI Terminal for the 2211f only Tilt: -5° to +25° Maximum Weight (unpacked): 3.
Table B-3 2311cm/2311f/2311x Specifications (continued) Specifications Dimensions (w x d x h): 557.95 x 159.0 x 416.48 mm (2 1.97 x 6.26 x 16.40 in) Maximum Graphics Resolution: 1920 x 1080 @ 60 Hz Optimum Graphics Resolution: 1920 x 1080 @ 60 Hz Text Mode: 720 x 400 Pixel Pitch: 0.
Table B-4 2511x Specifications (conti nued) Specifications Vertical Frequency: 50 to 76 Hz Operating Temperature: 5° to 35° C (41° to 95° F) Non-Operating Temperature: -20° to 60° C (-4° to 140.
Table B-5 2711x Specificat ions (continued) Specifications Storage Altitude: 0 to 12,192 meters (0 t o 40,000 feet) Power Source: 100-240 VAC (ca), 50/60 Hz Maximum Power C onsumption: 35 wat ts (W) T.
Table B-7 2211f / 2211x, 2311cm / 2311f / 2311x, 2511x and 2711x Factory Preset Video Input Modes (conti nued) Preset Resolution Horizontal Freque ncy (kHz) Vertical Fre quency (Hz) 8 1680 x 1050 65.
Power Adapters Table B-9 Power Adapters Manufacturer Model Number TPV Technology Group ADCP1236 LiteOn PA-1041-11TA-LF APD, Asian Power Devices, Inc. DA-36N12, DA-50F19 Delta ADP-40DD B Series LCD Mon.
C Agency Regulatory Notices Federal Communications Commission Notice This equipme nt has been te sted and foun d to comply w ith the limits for a Class B dig ital device , pursuant t o Part 15 of the FCC Rul es. These limi ts are designed to prov ide reasonable protection against harmful interference in a residential inst allation.
Or, call 1 -800-HP-INVENT (1-8 00 474-6836 ) For questions regarding this FCC declarati on, contact: Hewlett Packar d Company P. O. Box 692000, Mai l Stop 510101 Houston, Tex as 77269-20 00 Or, call ( 281) 514-333 3 To identify this prod uct, ref er to the Part , Series, or Mo del number found on the product.
The point of contact for regulatory matters is: Hewlett-Packard GmbH, Dept./MS: HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, GERMANY. German Ergonomics Notice HP products which bear the "G.
Japanese Power Cord Requirements For use in Ja pan, use only the power cord received with this product. CAUTION: Do not use the power cord received with this product on any other products. Product Environmental Notices ENERGY STAR® Qualification HP Displays marked with the ENERGY STAR® certification ma rk meet the requirements of the U.
Disposal of Waste Equipment by Us ers in Private Household in the European Union This symbol on the product or on its packaging indica tes that this product must not be disposed of with your household waste.
Restriction of Hazard ous Substances (RoHS) A Japanese regulatory requirem ent, defined by specifica tion JIS C 0950, 2005, ma ndates that manufacturers pro vide Material Co ntent Declarations for certain categori es of electronic products offered for sale after July 1, 2 006.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il HP (Hewlett-Packard) 2511X è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del HP (Hewlett-Packard) 2511X - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso HP (Hewlett-Packard) 2511X imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul HP (Hewlett-Packard) 2511X ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il HP (Hewlett-Packard) 2511X, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del HP (Hewlett-Packard) 2511X.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il HP (Hewlett-Packard) 2511X. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo HP (Hewlett-Packard) 2511X insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
