Manuale d’uso / di manutenzione del prodotto VTS 612D21 del fabbricante Hoover
Vai alla pagina of 32
W ashing machine Instructions for use ® VT D2.
2 Intr oduction Please read these instructions for use carefully and all other information enclosed with the washing machine. Keep all documentation in a safe place for future reference or for any future owners.
Contents Page Introduction 2 General delivery notes 4 Safety notes 4 Quick start 5 Description of controls 6 Programme T able 12 Programme selector 14 Detergent drawer 17 Detergents, washing aids and .
General delivery notes Please check that the following items are delivered with the appliance: - Instruction manual - Certificate of guarantee - Inlet hose Check that no damage has occurred during transit, and if so, call your nearest Authorised T echnical Support Service agent.
M) N.B! If the appliance is installed on a carpeted floor ensure that the ventilation holes on the base of the appliance are not obstructed. N) If the appliance is not running properly or breaks down, switch it of f, turn off the tap and do not tamper with the appliance.
6 Description of contr ols Door handle A Programme Start light B "Start/Pause" button C "Cold W ash" button D "Sensitive Care" button E "Delay Start" button F "Spin Speed" button G Digital display H Buttons indicator light M Programme selector with “OFF” position N Detergent drawer P Fig.
Door handle Press the finger-bar inside the door handle to open the door . A 7 NOTE: When the "Start/Pause" button has been pr essed, the appliance can take few seconds before it starts working. “ST ART/P AUSE” button Press to start the selected cycle .
8 The option buttons should be selected before pr essing the "Start/Pause" button. “SENSITIVE CARE” button By pressing this button you can activate a special new wash cycle in the Cotton and Mixed Fabrics programs, thanks to the new Sensor System.
W ar ning: If ther e is any break in the power supply while the machine is operating, a special memory stores the selected programme and, when the power is r estored, it continues where it left of f. 9 G F “DELA Y ST ART” button This button allows you to pre-programme the wash cycle to delay the start of the cycle for up to 24 hours.
10 “DIGIT AL” Display The display’s indicator system allows you to be constantly informed about the status of the machine: 1) SPIN SPEED Once the programme has been selected, the maximum spin speed allowed for that programme appears on the display .
11 PROGRAMME selector with "OFF" position WHEN THE PROGRAMME SELECTOR IS TURNED THE DISPLA Y LIGHTS UP TO SHOW THE SETTINGS FOR THE PROGRAMME SELECTED. FOR ENERGY SA VING, A T THE END OF THE CYCLE OR WITH AN INACTIVITY PERIOD, THE DISPLA Y LEVEL CONTRAST WILL DECREASE.
12 90° 60° 40° 30° 30° 40° - - - 40° 30° 30° 30° 40° 50° 21 ●● ● ●● ●● ●● ●● ●● ● ●● ●● ●● ●● ●● ● ● ● 7 7 7 7 2 3 - - - 1,5 1 2,5 3,5.
13 Please read these notes * Maximum load capacity of dry clothes, according to the model used (see rating plate). When washing heavily soiled laundry it is recommended the load is reduced to 3/4 kg maximum.
14 Pr ogramme selector For the various types of fabrics and various degrees of dirt the washing machine has different programme bands according to: wash cycle, temperature and lenght of cycle (see table of washing cycle programmes). RESIST ANTS F ABRICS The Cotton programmes are designed for maximum washing and rinsing efficiency .
15 DRAIN ONL Y This programme drains out the water . WOOLMARK PROGRAMME A programme dedicated to washing fabrics labelled with the woolmark . The cycle comprises of alternate periods of activity and pauses. The programme has a maximum temperature of 40° and concludes with 3 rinses and a short spin.
16 Auto half load The washing machine is fitted with a self adjusting water level system. This system enables the machine to use the amount of water needed to wash and rinse the laundry in relation to the particular load.
Detergent drawer The detergent drawer is split into 3 compartments: - the compartment labelled "1" is for prewash detergent; - the compartment labelled " " is for special additives, fabric softeners, fragrances, starch, brighteners etc; - the compartment labelled "2" is for main wash detergent.
Detergents, washing aids and amounts to use Choice of detergent General purpose detergents - Powder detergents , for a thorough wash, with bleaching agent, particularly suitable for use in hot wash programmes (60°C and over), for heavily soiled and stained laundry .
Dosages Only use detergents which are suitable for use in a washing machine. Y ou will obtain the best results from your wash with the minimum use of chemical products and the best care for your laundry if you take into consideration the degree of soiling as well as the type of detergent to choose.
Useful advice for users T ips on using your domestic appliance in the most environmentally-friendly and economical way Do a full load in your washing machine T o prevent any possible waste of energy , water or detergent we recommend that you put a full load in your washing machine, not exceed the recommended maximum load size.
Main wash Sorting the laundry - It is recommended you wash only items which are machine washable with water and detergent and not dry-clean items. - If you need to wash rugs, bedspreads or other heavy items, it is best not to spin them.
The correct way to wash Preparing the laundry A) Select the laundry . Loading the laundry B) Open the porthole. C) Put the laundry in the washing machine.
Cleaning and r outine maintenance Do not use alcohol-based scourers and / or thinners on the outside of your washing machine, just a wipe with a damp cloth will suffice. The washing machine needs very little maintenance: - Cleaning the drawer compartments.
Cleaning the door glass Regularly clean the door glass with a damp cloth. A build up of soiling and residues from the water may result in water leaking from the door .
Investigating malfunctions What might be the cause of… Defects you can remedy yourself Plug not in socket. Not switched on. Power failure. Fuse blown. Door open. See cause 1. T ap turned off. Programme selector not correctly positioned. Fill hoses are kinked Kink in discharge hose.
Note: The use of environmentally-friendly , phosphate-free detergents can have the following effects: - waste water from rinsing may be cloudier because of the presence of zeolites held in suspension,.
Appliance complies with European Directives 73/23/EEC and 89/336/EEC, replaced by 2006/95/EC and 2004/108/EC, and subsequent amendments. T echnical data ■ Max.
SETTING UP + INST ALLA TION Remove the polystyrene base and place the machine near its permanent position (diagram 1). Carefully cut through the hose retaining clip at the rear of the appliance (diagram 2). Remove the 2 or 4 fixing screws marked ( A ) and remove the 2 or 4 spacers marked ( B ) (diagram 3).
Note: we recommend you keep the scr ews to immobilise the machine for futur e transit. The Manufacturers will not be r esponsible for any possible damage to the machine caused by not following the rules relating to r eleasing the mechanism. The user is responsible for all costs of installation.
Note: it is advisable to turn off the tap after each wash to isolate the washing machine fr om the water supply . For the washing machine to function properly the terminal end of the discharge hose (mouth) must be at a minimum of 50 cm and a maximum of 85 cm from the ground.
The manufacturer declines all responsibility in the event of any printing mistakes in this booklet. The manufacturer also reserves the right to make appropriate modifications to its products without changing the essential characteristics.
This appliance is marked according to the European directive 2002/96/EC on W aste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly , you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Hoover VTS 612D21 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Hoover VTS 612D21 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Hoover VTS 612D21 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Hoover VTS 612D21 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Hoover VTS 612D21, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Hoover VTS 612D21.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Hoover VTS 612D21. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Hoover VTS 612D21 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
