Manuale d’uso / di manutenzione del prodotto FloorMATETM The Hard Floor Cleaner del fabbricante Hoover
Vai alla pagina of 16
FloorMATE ™ The Hard Floor Cleaner Owner’s Manual English ➜ pp. 1-13 Español ➜ pàg. 15-22 Français ➜ p. 24-31 Review this manual before operating cleaner . www.hoover.com Thank you for selecting a HOOVER product. This cleaner inspected and packaged carefully before being shipped from the factory.
2 Fill in and retain The model and serial number are located at the bottom of the back of the cleaner body. For your personal records, please enter the COMPLETE model and serial number in the spaces provided and retain this information.
3 1. Assembly 1-1 1-2 Questions or Concerns? The Hoover Company wants to quickly resolve any concerns about your cleaner or questions regarding its use.
E 1-3 1-5 1-4 With cord hook (B) to back of cleaner, push upper handle down onto cleaner. Insert screw with washer in front of tank area. Tighten screw with a Phillips screwdriver. Replace clean solution tank by posi - tioning bottom first. Press latch and snap top portion into place.
6 2-1 The assembled cleaner will look like this drawing. 1. Hand grip 2. Solution trigger: squeeze to release clean solution. 3. Brush control switch: Turns brushes ON for wet cleaning and OFF for wet pickup and dry vacu uming. 4. Clean solution tank release 5.
2-9 Carry tank to a sink. Rotate tank cap counter-clockwise and lift up to remove cap. 2-8 The Tanks Clean Solution Tank (Upper Tank) The clean solution tank holds the cleaning solution that is to be dis - persed onto the surface to be cleaned. How to fill Disconnect cleaner from electrical outlet.
I 7 2-12 2-13 Turn cap (H) upside down to serve as a measuring cup. 2-10 Using cap, measure 2 oz. of applica - ble concentrate formulated for use with the ‘FloorMate’ hard floor cleaner. 2-11 Pour detergent into tank. Fill tank to fill line (I) (1 quart) with warm water.
2-21 2-22 Turn cleaner OFF and disconnect from electrical outlet. Remove recovery tank and lid (Fig. 2- 16 & 2-17). Remove filter lid (S), then remove filter. Remove loose debris from filter by either brushing or tap - ping the filter. The filter may also be rinsed for additional cleaning.
OPERATION BRUSH CONTROL SWITCH WET/DRY PEDAL Dry Vacuuming “Wet/Dry Pickup” (UP) Dry Pickup Wet Cleaning “Wet Scrub” (DOWN) Wet Pickup/ Scrub Wet Pickup “Wet/Dry Pickup” (UP) Wet Pickup/ Scrub See Page 6 Figs. 2-6 and 2-7 for complete instructions on the control switch and pedal.
4-1 4-2 Cleaning the brushes Turn cleaner OFF and disconnect from electrical outlet. The brush assembly can be removed for easy cleaning. Push the two brush release buttons (A) at the same time. Tilt cleaner back slightly and remove brush assembly (B).
4-3 4-4 4-5 4-6 4-7 4-8 To replace brushes, first remove solu - tion tank (Fig. 2-8) and recovery tank (Fig. 2-16). Set tanks aside. This will prevent possible leaking. With handle in upright position, tilt cleaner back so that it rests on the floor. Align post (C) on brush block with hole (D) on bottom of cleaner.
Service T o obtain approved HOOVER service and genuine HOOVER parts, locate the near - est Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot) by: • checking the Yello.
Full One Year Warranty (Domestic Use) Your HOOVER® appliance is warranted in normal household use, in accordance with the Owner’s Manual against original defects in material and workmanship for a period of one full year from date of pur - chase.
14.
Questions or Concerns? The Hoover Company wants to quickly resolve any concerns about your cleaner or questions regarding its use. Look on the list provided with the product for your local Hoover Fact.
1-2 A Assemble handle Assemble Handle Press down on latch (A) and remove clean solution tank from upper handle. Continued 4 1-3 1-5 1-4 B With cord hook (B) to back of cleaner, push upper handle down onto cleaner. Insert short screw in front of tank area.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Hoover FloorMATETM The Hard Floor Cleaner è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Hoover FloorMATETM The Hard Floor Cleaner - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Hoover FloorMATETM The Hard Floor Cleaner imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Hoover FloorMATETM The Hard Floor Cleaner ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Hoover FloorMATETM The Hard Floor Cleaner, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Hoover FloorMATETM The Hard Floor Cleaner.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Hoover FloorMATETM The Hard Floor Cleaner. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Hoover FloorMATETM The Hard Floor Cleaner insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
