Manuale d’uso / di manutenzione del prodotto ST03-15A1 del fabbricante HANNspree
Vai alla pagina of 59
.
.
Table of Contents 1 1. Warranty and Service .................................................... 3 2. Preface .................................................................... ..... 4 3. Description of Warning Symbols ..............................
Table of Contents 2 11. Adjusting On-Screen Display (OSD) Settings ............ ... 3 1 OSD Setting Menus ................. ................................ 3 2 Picture Setting ......................................................... 3 2 Brightness .
3 The instructions on this manual are for the model(s) listed on the front cover . Before you sta rt reading, check your product number by looking at the rear of your TV .
4 This manual is designed to assist us ers in setting up and using the LCD TV . Information in this document has been carefully checked fo r accu- racy; however , no guarantee is given to the correctn ess of the content s. The information in this document is subject to chang e without notice.
5 Electric Power Notice Electric power may cause personal inju ry and mechanical damage if it is misused. Although safety has been tak en into conside ration during the design and production of this product, electric shock or fire can result when the product is misused.
6 Power Supply Safety Notes 1. T o avoid electric shocks, do not use an extended p ower cord or an outlet that does not match this pr oduct's plug or leaves the plug exposed. 2. This product has a 3-pin gro unded plug. The th ird pin connect s to ground; do not r emove it.
7 Before Y ou Proceed 1. Read the Safety Notices and the User ’s Manual ca refully before turning the pro duct on. 2. Keep your User ’s Manual in a safe place for future reference. Keep the box and packaging in case the pr oduct needs to be shipped in the future.
8 Optimal V iewing Area CH VOL M U TE ME NU S OU RCE 160 cm 1 1.
9 Import ant Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this appara tus near water . 6. Clean only with a dr y cloth. 7. Do not block any ven t ilation openings.
10 10. Protect the power cord from being walked on or pinched particularly at th e plug, conve- nience receptacles, and the point where they exit from the app aratus. 1 1. Use only with a cart, stand, tripod, bracket, or table specified by the manufa cturer , or sold with the apparatus.
11 Personal Safety T o avoid overloading t he power supply , do not plug too many electrical devices into an outlet or extension cable. Dangerous high-volt age electric power compo - nents are lo cated inside the TV . T o avoid electric shock, do not disassemble the casing.
12 Inst allation T o avoid damage to power circuit s, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vent s. Install the outdoor antenna far from p ower trans- mission lines to av oid possible danger .
13 Operation Maintenanc e This product is designed for power sources as labeled on the casing. Avoi d using any other power accessories to avoid electric sho ck or other damage. The plug can be inserted into an outlet in only one direction. Notify a qualified service techni- cian if you cannot plug it in correctly .
14 FCC Compliance S tatem ent 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may not cause harm- ful interference, and ( 2) this devi ce must accept any inte rference received, including inter ference that may cause undesired operation .
15 DOC Compliance Notice 1 This digital app aratus does not exc eed the Class B limits for rad io noise emissions from digital app aratus as set ou t in the Radio Interference Regulations of the Canadian Dep artment of Communication s.This device complies with Canada ICES-003 Class B.
16 Thank you for purchasing this Liquid Crys- tal Display TV. Y our TV is designed to be safe, versatile, and easy to use. The rebound design makes it a fun addi- tion to any room.
17 Make sure the following component s are included in the box. Conta ct your vendor immediately if any thing is missing or damaged. TV User ’ s Manual Quick St art Guide W arranty and Service Manua.
18 F r ont V iew Description Function 1 Headphone line out Connects to h eadphones. 2 Adjust V olume Vo l u m e u p ( VOL+ ): Increases the volume. V olume down ( VOL– ): D ecrease s the volume. 3 Mute Press this button to eliminate sound. Press this button again or press the volume adjust buttons directly to restore sound.
19 5 Source Selects the input source to be displayed ( T V, AV 1 , o r AV 2 ) . 6 Select Channel Channel up ( CH S ): In creases the channe l number . Channel down( CH T ): Decreases the channel numb er . 7 Power LED Green LED indicates power on. 8 Power T urns the TV on and off.
20 Input and Output P or ts Description Function 1 DC-IN Connects to the included power adapter . 2 Line out Connects to external amplifier . 3 AV 2 Use the included 4 -IN-1 Audio/ Vide o cable to connect exte rnal devices, such as a VCR, VCD, or DVD player .
21 4 Antenna/cable TV line in Connects to an anten na or CA TV cable television line. 5 AV 1 Use the A V1 input to connect an external device, such as a VCR, or a VCD, or DVD player . Audio Input: A V connector white and red audio cables. Video Input: A V connector video (yel - low) cable or S-V ideo cables.
22 Connecting to an Antenna or Cable TV 1 Connect one end of the VH F/UHF (Antenna) or CA TV cable to the ANT Jack (VHF/UHF IN Jack) on the back of the TV . 2 Connect the other en d of the VHF/ UHF (Ante nna) or CA TV cable to the Antenna or CA TV socket.
23 Connecting to A V De vices Connect external devices such as VCD/DVD players or VCRs to the TV using the A V1 and A V2 ports on the back of the T V . Connecting to a VCR, VCD or DVD Player The illustration presented here shows you ho w to connect your TV to a VCR, VCD or DVD player .
24 Connecting to a Video Camera The following illustration shows you how to conn ect the TV to a cam- corder . Actual connections may vary accordin g to the make and model of the device. Refer to the user’s manual included with the camcorder for more detailed instructions.
25 Connecting Headphones Headphones ma y be used to listen to the TV instead of using the built-in speakers. Connect head phones to the head phone line out port as illustrated. Notes • Headphones are not included with the product. • The internal TV speakers will not outp ut sound when headphones are plugged in .
26 Connecting an Amplifier or Speak er s (Build-in amplifier) Connect an external amplifier or speakers to the line out port to pro- vide better sound quality .
27 Connecting the P ower Adapter 1 Connect the power cord to the power adapter as illustrated. 2 Plug the power ad apter connector into the DC-IN on the r ear panel o f the TV . 3 Plug the three-pronge d plug at the other end of the power cord into a power outlet.
28 Using the Remote Co ntrol For best results, use the remote control within a distance of 5 meters (16 feet) from the front of the TV’ s signal sensor . Do not exceed an angle of 30 degrees when point ing at the signal sensor . Refer to the following illustration.
29 T ur ning the TV On and Of f 1 Press POWER on the remote control or on the TV control p anel. The power LED indicator on the front of the TV changes from red to green, indicating that the power is on. 2 Press the POWER button again. The power LED changes from green to red, indicating that the TV is in standby (of f) mode.
30 Switching Source Signals Press SOURCE to select dif fer- ent source signals. CH, A V1, and A V2 appear on the top right corner of the screen in that order .
31 The On-Screen Display (OSD) menu system provides a quick a nd simple method to adjust your TV’ s settings. This chapter describes how to change each of the available settin gs. The OSD can be used with either the front pan el control or remote control.
32 Note Y ou can operate the OSD with either the front p anel control or the arrow buttons on th e remote con trol. Picture Setting Press MENU to enter the OSD Main Menu screen.
33 Brightness 1 Press the VOL UP button. The brightness slide bar appears. 2 Press the VOL UP button to increase the brightness. 3 Press the VOL DOWN button to decrease the brightne ss. 4 Press MENU to confirm the setting and return to the Picture Menu.
34 Contrast 1 Press the CH DOWN button to select CONTRAST . 2 Press the VOL UP button. The con - trast slide bar appears. 3 Press the VOL UP button to increase the contrast. 4 Press the VOL DOWN button to decrease the contrast. 5 Press MENU to confirm the se tting and return to the Pictur e Menu.
35 Sharpness 1 Press the CH DOWN button to select SHARPNESS. 2 Press the VOL UP button. The sharpness slide bar appears. 3 Press the VOL UP button to increase the sharpness. 4 Press the VOL DOWN button to decrease the sharpness. 5 Press MENU to confirm the setting and return to the Picture Menu.
36 Hue 1 Press the CH DOWN butto n to select HUE. 2 Press the VOL UP button. The hue slide bar appears. 3 Press the VOL UP button to increase the hue toward the g reen end of the spectrum. The image becomes more green. 4 Press the VOL DOWN button to decrease the hue toward the red end of the spectrum.
37 Saturation 1 Press the CH DOWN button to select SA TURA TION. 2 Press the VOL UP button. The satu - ration slide bar appears. 3 Press the VOL UP button to increase the satur ation. 4 Press the VOL DOWN button to decrease the saturation. 5 Press MENU to confirm the setting and return to the Picture Menu.
38 Color 1 Press the CH DOWN button to select COLOR . 2 Press the VOL UP button. The cu r - rent setting appears blinking in the brackets . Neutral Color Press the VOL UP button to select NEUTRAL, then pre ss MENU . “NEU - TRAL” appears in the brackets.
39 Preset 1 Press the CH DOWN button to select PRESET . 2 Press the VOL UP button. “OK” appears in the bra ckets. All picture settings are returned to the factory- set default values.
40 Note Y ou can operate the OSD with either the front p anel control or the arrow buttons on th e remote con trol. Audio Setting Press MENU to enter the OSD Main Menu screen. 1 Press the CH UP/CH DOWN button to select AUDIO. 2 Press the VOL UP button to enter the Audio Menu.
41 Tr e b l e 1 Press the VOL UP button. The tre - ble slide bar appears. 2 Press the VOL UP button to increase the treble. 3 Press the VOL DOWN button to decrease the treble.
42 Bass 1 Press the CH DOW N button to select BASS. 2 Press the VOL UP button. The bass slide bar appears. 3 Press the VOL UP button to increase the bass. 4 Press the VOL DOWN button to decrease the bass. 5 Press MENU to confirm the se tting and return to the Audio Menu.
43 Balance 1 Press the CH DOW N button to select BALANCE. 2 Press the VOL UP button. The bal - ance slide bar appears. 3 Press the VOL DOWN button to shif t the balance to the lef t speaker . 4 Press the VOL UP button to shift the balance to the right speaker .
44 Surround Enhance 1 Press the CH DOW N button to select SU RROUND. 2 Press the VOL UP button to enter the setting field. 3 Press the VOL UP button to turn surround on or of f. 4 Press MENU to confirm your choice. 1 Press the CH DOWN butto n to select ENHANCE.
45 Preset 1 Press the CH DOWN button to select PRESET . 2 Press the VOL UP button. “OK” appears in the bra ckets. All audio settings are returned to the factory- set default values.
46 Note Y ou can operate the OSD with either the front p anel control or the arrow buttons on th e remote con trol. TV Setting Press MENU to enter the OSD Main Menu screen. 1 Press the CH UP/ CH D OWN button to select TV . 2 Press the VOL UP button to enter the TV Menu.
47 TV/CA TV 1 Press the VOL UP button. The cu r - rent setting appears flashing in the brackets . Receiving Cable TV Press the VOL UP button to select CA TV , then press MENU . “CA TV” appears in the brackets. Receiving Broadcast TV Press the VOL UP button to select TV , then press MENU .
48 Channel Add/Erase 1 Press the CH DOWN button to select CH ADD/ERASE. 2 Press the VOL UP button. The OSD menu display switches to the fol - lowing screen. P r e s s the CH UP/CH DOWN button on the front p anel to select a channel. Add Channel Then press the VOL UP button on the fr o n t p a ne l to add the selected channel.
49 Auto Program 1 Press the CH DOWN button to select AUTO PROGRAM. 2 Press the VOL UP butto n to begin auto programming. The screen dis - plays channels incrementally as th e TV scans for av ailable channels.
50 Note Y ou can operate the OSD with either the front p anel control or the arrow buttons on th e remote con trol. Customize Setting Press MENU to enter the OSD Main Menu screen. 1 Press the CH UP/ CH DOWN button to select AUDIO. 2 Press the VOL UP b utton to enter the Audio Menu.
51 Sleep Timer The sleep timer turns the TV of f automatically af ter a set time. 1 Press the VOL UP butto n to select a value: OFF , 30, 60, 90, or 1 20 minutes. 2 Press MENU to confirm your choice. Y ou can also press SL EEP on the remote control to select 30, 60, 90 or 120 minutes.
52 OSD Timeout This setting allows you to set the length of time th e OSD menus appear on the screen when a button is not p ressed. Language 1 Press the CH DOWN button to select OSD TIMEOUT . 2 Press the VOL UP butto n. The cur- rent setting appears flashing in the brackets .
53 T urn the power off before you begin cleaning the TV. For best results, use a clean lens cloth to remove dust and fingerprint s from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid dam- aging the finish.
54 Situation Solution No picture and sound. • Connect the power cord prop erly . • Press the POWER button on the control panel or remote control. • Press the SOURCE button to cycle through connected video sou rces. • Press the CH UP or CH DOWN button to switch to other TV st ations.
55 Remote control doesn’t work. • Make sure the battery is inserted correctly . • Replace the battery w ith a new one. • Make sure the TV power cord is plugged in. • Make sure the path between the remote control and the sensor is clear . • T ry operating the remo te control at a closer distance to the TV .
56 ST03-15A1 LCD Panel Size 15-inch TFT Aspect Ratio 4:3 Best Resolution 1024 (horizont al) x 768 (vertical) Maximum Display Area 304.1 mm (H) x 228.1mm (V) TV System NTSC Video System A V1: C omposit.
57 Aspect Ratio The ratio of width to height of a film, image or display screen. Broadcast TV Broadcasting video signals using high-frequency ele ctromagnetic waves to distribute television ch annels to viewers (standard TV broadcast). CA TV Community Antenna T e levision, the original name for cable TV .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il HANNspree ST03-15A1 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del HANNspree ST03-15A1 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso HANNspree ST03-15A1 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul HANNspree ST03-15A1 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il HANNspree ST03-15A1, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del HANNspree ST03-15A1.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il HANNspree ST03-15A1. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo HANNspree ST03-15A1 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
