Manuale d’uso / di manutenzione del prodotto HZ221/HZ231 del fabbricante Hanns.G
Vai alla pagina of 28
HSG 1085/ HSG 1084 HSG 1088/ HSG 1083 HSG 1082/ HSG 1081 HZ194/HZ201 HZ221/HZ231 HZ251/HZ281.
User ’ s Manual 2 Before operating the monitor, please read this ma nual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interfer ence S tatement This equipment has been tested and found to comp ly with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
User ’ s Manual 3 Model: HZ251 & HZ281 Congratulations! The product you have just purchased carries the TCO’06 Media Displays label. This means that your disp lay is designed and manufactured according to some of the strictest pe rform ance and environmental criteria in the world.
User ’ s Manual 4 RECYCLING INFORMATION We, the Hanns.G care very much about our environment prot ection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life.
User ’ s Manual 5 T ABLE OF CONTENTS SAFETY NOTICE .................................................................................................. 6 PRECAUTIONS .....................................................................................
User ’ s Manual 6 SAFETY NOTICE 1. The changes or modifications not expressly approved by the pa rty responsible for compliance could void the user's authority to operate the equipm ent. 2. Shielded interface cables and AC pow er cord, if any , must be used in order to comply with the emission limits.
User ’ s Manual 7 SPECIAL NOTES ON LCD MONITORS The following symptoms are norm al with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the sc reen may flicker during initial use. T urn of f the Power Switch and then turn it on again to make sure the flicker disappears.
User ’ s Manual 8 BEFORE YOU OPERA TE THE MONITOR FEA TURES Model: HZ1 94 HZ201 HZ221 HZ231 HZ251 HZ281 Size: 18.5”W ide 20”W ide 22”W ide 23”W ide 25”W i de 28”W ide Recommended Resolut.
User ’ s Manual 9 INST ALLA TION INSTRUCTIONS INST ALL REMOVE Figure.1. Installing and Removing the Base INSTALLATION: 1. Place the monitor face down on a flat leveled surface. 2. Align the monitor with the opening in the base. 3. Turn the screw clockwise to atta ch the base to the monitor.
User ’ s Manual 10 MAKING CONNECTIONS CONNECTING TO A PC T urn of f your computer before performing the procedure below . 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer ’ s D-Sub port.
User ’ s Manual 11 ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the m onitor , then adjust the monitor ’ s angle to your own preference. • Hold the stand so you do not topple the m on itor when you change the monitor ’ s angle.
User ’ s Manual 12 OPERA TING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or of f. The other control butt ons are located on the front panel of the monitor (See Figu re 4). By changing these settings, the picture can be adjuste d to your personal preferences.
User ’ s Manual 13 FRONT P ANEL CONTROL • Power Button: Press this button to switch ON/OFF of m onitor ’ s power . • Power Indicator: Green — Power On mode. Orange — Power Saving mode. • MENU / RETURN: 1. T urn the OSD menu on/of f or re turn to the previous menu.
User ’ s Manual 14 Resolution 640x400@70Hz ↔ 720x400@70Hz 640x400@85Hz ↔ 720x400@85Hz 640x480@60Hz ↔ 720x480@60Hz 1024x768@70Hz ↔ 1280x768@70Hz 1280x768@60Hz ↔ 1360x768@60Hz 1360 x 768@60H.
User ’ s Manual 15 HOW T O ADJ UST A SETTINGS BRIGHTNESS/ CONTRAST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select 「 BRIGHTNESS 」 option to adjust the brightness value. CONTRAST Adjust the contrast value of the display according to your preference.
User ’ s Manual 16 H-POSITION Select the 「 H-POSITION 」 option to shift the scre en image to the left or right. Enter the op tion and adjust the level. [For VGA only] V - POSITION Select the 「 V -POSITION 」 option to shift the screen image up or down.
User ’ s Manual 17 OSD COLOR T o choose the color combination of the OSD window , select 「 OSD COLOR 」 option under 「 OSD SETTING 」 menu, choose modes 1/2/3.
User ’ s Manual 18 PLUG AND PLA Y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capa bilities according to the VESA DDC ST ANDAR D. It allows the monitor to inform the host system of its identity and, depe nding on the level of DDC used, communicate additional information about its display capabilities.
User ’ s Manual 19 TECHNICAL SUPPOR T (F AQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible.
User ’ s Manual 20 INPUT as a PC option, and make sure PC audio output cable is connected to monitor’s LINE IN port(or AUDIO IN port) . [For HDMI Input only].
User ’ s Manual 21 ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED : 1. Check that the signal-cable is properly connect ed, If the connector is loose, tighten the connector ’ s screws. 2. Check the signal-cable’ s connection pins for damage.
User ’ s Manual 22 28 1440×900 @60H z 64.981 60.05 ▲ ▲ ▲ ▲ ▲ 29 1440×900 @75H z 66.981 75.07 ▲ ▲ ▲ ▲ ▲ 30 1400×1050 @6 0Hz 64.744 59.948 ▲ 31 1600×900 @60H z 5 5.54 59.978 ▲ ▲ 32 1680×1050 @6 0Hz 65.29 59.954 ▲ ▲ ▲ 33 1920×1080 @6 0Hz 66.
User ’ s Manual 23 APPENDIX SPECIF ICA TIO NS HZ1 94 LCD Panel Driving system TFT Color LCD Size 18.5" W ide Pixel pitch 0.3mm(H) x 0.3mm(V) V ideo H-Frequency 24KHz – 61KHz V - Frequency 56– 75Hz Display Colors 16.
User ’ s Manual 24 SPECIF ICA TIO NS HZ201 LCD Panel Driving system TFT Color LCD Size 20" W ide Pixel pitch 0.276mm(H) x 0.276mm(V) V ideo H-Frequency 24KHz – 70KHz V - Frequency 56 – 75Hz Display Colors 16.
User ’ s Manual 25 SPECIF ICA TIO NS HZ221 LCD Panel Driving system TFT Color LCD Size 22" W ide Pixel pitch 0.282mm(H) x 0.282mm(V) V ideo H-Frequency 24KHz – 83KHz V - Frequency 56 – 75Hz Display Colors 16.
User ’ s Manual 2 6 SPECIF ICA TIO NS HZ231 LCD Panel Driving system TFT Color LCD Size 23" W ide Pixel pitch 0.265mm(H) x 0.265mm(V) V ideo H-Frequency 24KHz – 83KHz V - Frequency 56 – 75Hz Display Colors 16.
User ’ s Manual 2 7 SPECIF ICA TIO NS HZ251 LCD Panel Driving system TFT Color LCD Size 25" W ide Pixel pitch 0.283mm(H) x 0.283mm(V) V ideo H-Frequency 24KHz – 83KHz V - Frequency 56 – 75Hz Display Colors 16.
User ’ s Manual 2 8 SPECIF ICA TIO NS HZ281 LCD Panel Driving system TFT Color LCD Size 28" W ide Pixel pitch 0.309m m (H) x 0.309mm(V) V ideo H-Frequency 24KHz – 80KHz V - Frequency 56 – 75Hz Display Colors 16.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Hanns.G HZ221/HZ231 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Hanns.G HZ221/HZ231 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Hanns.G HZ221/HZ231 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Hanns.G HZ221/HZ231 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Hanns.G HZ221/HZ231, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Hanns.G HZ221/HZ231.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Hanns.G HZ221/HZ231. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Hanns.G HZ221/HZ231 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
