Manuale d’uso / di manutenzione del prodotto G7212 del fabbricante Grizzly
Vai alla pagina of 34
24" BANDSAW MODEL G7211/G7212 INSTRUCTION MANUAL COPYRIGHT ©1992 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints.
G7211/7212 24" Bandsaw -1- Table Of Contents PAGE 1. SAFETY SAFETY RULES FOR POWER TOOLS ............................................................2-3 ADDITIONAL SAFETY INSTRUCTIONS FOR BANDSAWS ................................4 2. CIRCUIT REQUIREMENTS 220V OPERATION .
-2- G7211/7212 24" Bandsaw Safety Instructions For Power Tools SECTION 1: SAFETY 5. KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe distance from work area. 6. MAKE WORK SHOP CHILD PROOF with padlocks, master switches, or by removing starter keys.
G7211/7212 24" Bandsaw -3- 9. USE PROPER EXTENSION CORD . Make sure your extension cord is in good condi- tion. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
-4- G7211/7212 24" Bandsaw Additional Safety Instructions For Bandsaws No list of safety guidelines can be com- plete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect.
G7211/7212 24" Bandsaw -5- 220V Operation The motor supplied with the G7211 comes prewired for 220V. Refer to the wiring diagram supplied at the back of this manual for more spe- cific information about wiring connections. The G7212 is a 220V, three-phase motor and requires special electrical service.
-6- G7211/7212 24" Bandsaw The Model G7212 has a 7.5 H.P. motor config- ured to operate under three-phase electrical serv- ice. Generally this type of electrical supply is only found in commercial or industrial locations. Connection to three-phase service should only be done by a qualified electrician.
G7211/7212 24" Bandsaw -7- SECTION 3: INTRODUCTION Commentary We are proud to offer the Models G7211/G7212 24" Bandsaws. These bandsaws are part of a growing Grizzly family of fine woodworking machinery.
-8- G7211/7212 24" Bandsaw Unpacking The bandsaw is shipped from the factory in a carefully packed carton. If you find the machine to be damaged after you’ve signed for delivery and the truck and driver are already gone, you will need to file a freight claim with the carrier.
G7211/7212 24" Bandsaw -9- Clean Up The unpainted surfaces are coated with a waxy oil to protect it from corrosion during shipment. Remove this protective coating with a solvent cleaner or citrus-based degreaser such as Grizzly’s G7895 Degreaser.
-10- G7211/7212 24" Bandsaw SECTION 4: ASSEMBLY Fence Most of your G7211/G7212 24'' Bandsaw has been assembled at the factory. Only the fence assembly requires installation.
G7211/7212 24" Bandsaw -11- SECTION 5: ADJUSTMENTS Tracking To adjust the tracking: 1. Disconnect the bandsaw from the power source and open the top and bottom wheel covers. Adjust the upper and lower guide assemblies away from the blade. 2. Loosen the lock nut on the tracking knob.
-12- G7211/7212 24" Bandsaw Figure 6. Wheel alignment adjusting knobs. Adjusting Knobs Figure 5. Wheel alignment conditions. For proper operation of the bandsaw it is impor- tant that the upper and lower wheels be aligned so they are in the same plane.
G7211/7212 24" Bandsaw -13- 5. Install your blade of choice. Track and ten- sion as per the instructions in this manual. 6. Move the blade guide assembly so the bearing guides are 1 / 16 " behind blade gul- lets. Tighten the guide assembly. 7.
-14- G7211/7212 24" Bandsaw To adjust the positive stop so the table will be per- pendicular to the blade: 1. Loosen the trunnion lock handle and check nut locking the positive stop adjusting bolt.
G7211/7212 24" Bandsaw -15- Pre-Run Check Bandsaw Blades SECTION 6: OPERATIONS The bandsaw is one of the most versatile machines in the shop. It can cut miters, com- pound angles, simple and complex curves, cir- cles, and a wide variety of irregular shapes.
-16- G7211/7212 24" Bandsaw Figure 10. Side and front views of a standard bandsaw blade. Gullet Line Gullet Tooth To remove the blade, ensure the power is discon- nected and: 1. Loosen tension on the blade by turning the tension control knob. 2. Remove the table insert and table pin.
G7211/7212 24" Bandsaw -17- Changing Speeds The G7211/G7212 24" Bandsaw provides two speeds, 2800 and 3500 FPM, to make cutting easier. In many applications, blade speed is a matter of personal preference. Usually the higher speed will produce the best results, but if the motor is straining while cutting, try a slower blade speed.
-18- G7211/7212 24" Bandsaw Stacked Cuts One of the benefits of a bandsaw is its ability to cut multiple copies of a particular shape by stack- ing a number of workpieces together. Before making stacked cuts, it is essential to ensure that both the table and the blade are prop- erly adjusted to 90°.
G7211/7212 24" Bandsaw -19- Cutting Curves When cutting curves, simultaneously feed and turn the stock carefully so that the blade follows the layout line without being twisted. If a curve is so abrupt that it would be necessary to repeated- ly back up and cut a new kerf, use either a nar- rower blade or a blade with more set to avoid that.
-20- G7211/7212 24" Bandsaw SECTION 7: MAINTENANCE V-Belts To ensure optimum power transmission from the motor to the blade, the V-belt must be in good condition and operate under proper tension. Belts should be checked for cracks, fraying and wear.
G7211/7212 24" Bandsaw -21- Shielded and pre-lubricated ball bearings require no lubrication for the life of the bearings. All bear- ings are standard sizes and replacements can be purchased from our parts department or bearing supply store.
-22- G7211/7212 24" Bandsaw The following pages contain general machine data, parts diagrams/lists, and W arranty/Return information for your Model G7211/G7212 24" Bandsaw. If you need parts or help in assembling your machine, or if you need operational information, we encourage you to call our Service Department.
G7211/7212 24" Bandsaw -23- Design Type: ......................................................................................................Floor Model Overall Dimensions: Table .................................................................
-24- G7211⁄7212 24" Bandsaw Ref# Part# Description 001 P7211001 BODY 002 P7211002 BEARING BASE 003 P6206 6206 BEARING 004 P7211004 SHAFT 005 PK27M KEY 7 X 7 X 25 006 P7211006 HEX NUT 3 ⁄ 4 X .
G7211⁄7212 24" Bandsaw -25- Ref# Part# Description 088 P7211088 LOCKING HANDLE 089 P7211089 LOCKING HANDLE 090 P7211090 LOWER GUIDE BRACKET 091 P7211091 BLADE SUPPORT SHAFT 091B P6202 BEARING 0.
-26- G7211/7212 24" Bandsaw 125 40 39 46 38 37 37 36 5 34 35 33 21 22 21 28 29 27 15 30 31 32 26 26A 25 23 20 21 19 118 117 116 15 16 11 17 18 109 108 10 11 12 9 3 8 6 7 14 13 5 4 66 11 12 52 65 .
G7211/7212 24" Bandsaw -27- 53 5 21 12 11 63 11 11 11 17A 17A 17A 12 62 61 107 106 105 104 16 15 31 103 21 102 100 11 17 99 8 101 8 101 96 98 93 91 91B 91B 91C 95 16 85 15 91D 91E 75 76 74 59 89 .
-28- G7211/7212 24" Bandsaw MAN 1L1 To Foot Brake 3L2 5L3 13NO 2T1 4T2 6T3 SINGLE PHASE 220 VOLT POWER SOURCE MOTOR G7211 Switch Wire Diagram 14NC Ground 95 97 96 98 14 18 22 A U T O T E S T T1 2.
G7211/7212 24" Bandsaw -29- MAN. 1L1 To Foot Brake 3L2 5L3 13NO 2T1 4T2 6T3 THREE PHASE 220 VOLT POWER SOURCE G7212 Switch Wire Diagram 14NC Ground 95 97 96 98 18 22 26 A U T O T E S T T1 2 T2 4 .
-30- G7211/7212 24" Bandsaw Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
CUT ALONG DOTTED LINE 9. How many of your woodworking machines are Grizzly? _____________ 10. Which benchtop tools do you own? Check all that apply. ___1" x 42" Belt Sander ___6" - 8&qu.
TAPE ALONG EDGES--PLEASE DO NOT STAPLE FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 Place Stamp Here Name_____________________________.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Grizzly G7212 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Grizzly G7212 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Grizzly G7212 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Grizzly G7212 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Grizzly G7212, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Grizzly G7212.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Grizzly G7212. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Grizzly G7212 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
