Manuale d’uso / di manutenzione del prodotto C1110-32 del fabbricante Amer Networks
Vai alla pagina of 17
Gigabit Ethernet Adapter User’s Guide Version 1.0 PN# 1907GA1200T6380 This User's Guide contains important inform ation regarding the installation of your adapter card.
Amer.com 7259 Bryan Dairy Road, Lar go, FL 33777 © Amer.com Corp., 1997-2002 All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from Amer.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.
. Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected to. . Consult the dealer or an exp erienced radio/TV technician for help.
1 I NTRODUCTION Thank you for choosing the 10/100/1000Mbps Gigabit Ethernet Card for 32-bit PCI Bus-equipped perso nal computers. The 32-bit PCI 10/100/1000Mbps Gigabit Ethernet Card is ideal for spee.
2 Supports IEEE802.1Q VLAN tagging Supports 10/100/1000Mbps Auto-negotiation operation Full Duplex support for 10/100/1000M b/s data rates Auto MDI-II/MD I-X crossover f or all three speeds Built-in FIFO (8K/64K) buffers reduces overhead of memory transfers 802.
3 provides a straightforward up grade without wasting a company’s existing invest ment in hardware, software, an d trained pe rsonnel. The increased speed and extra bandwidth offered by Gigabit Ethe.
4 Fast Ethernet Tech nology The growing importance of LANs and the increasin g complexity of desktop computing applications ar e fueling the need for high perform ance networks. A number of high-speed LAN technologies have been proposed to provide greater bandwidth and im prove client/server response times.
5 U NPACKING AND I NSTALLATION This chapter provides unpacking and installation information for the 32-bit PCI 10/100/ 1000Mbps Gigabit Ethernet Card. Unpacking CAUTION: Under ordinary circumstances, .
6 z One 32-bit PCI 10/100/1000Mbps Gigabit Ethernet Card. z One Driver Diskette z This User’s Guide. If any item is found missing or damaged, please contact your local reseller for replacement . Installing the Gigabit Ethernet Card 1. Shut down the computer, unplugs its power cord, and remove the chassis cover.
7 5. Switch computer power on. If the BIOS section of your computer’s boot progr am is Plug-and-Play compliant, then at power-up the BIOS will automatically configure any newly installed the Gigabit Ethernet Card.
8 Software Installation Before you connect the 32-bit PCI 10/100/100 0Mbps Gigabit Ethernet Card to the network, you have to install the network driver fi rst.
9 LED I NDICATORS Two LED indicators: Link, Activity. Link Indicator This indicator lights green when the Gigabit Card is connects to 10/100/1000Mbps Gigabit Ethernet Network. Activity Indicator (ACT) This indicator blinking gr een will be transmitting or received data on the network.
10 T ECHNICAL S PECIFICATIONS General Standards IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethe rnet IEEE 802.
11 Amer.com Warranty Policy Limited Lifetime Warrant y In the event of a defect in quality or workmanship, Amer.com will repair or replace any hardware product sold by Amer.
12 improperly installed or faulty software, or service by anyone other than an Amer.com Service Technician. If there is evidence that the failure was due to user negligence, Amer.com has the right to void this warranty and or charge normal service rates for the subject repair.
13 Limits and Expectati ons There are no express warranties except as listed above. Network products by Amer.com shall not be liable for incidental or consequential damages resulting from the use of this product. Any future upgrades, including (but not limited to) hardware and software are not covered by this limited warranty.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Amer Networks C1110-32 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Amer Networks C1110-32 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Amer Networks C1110-32 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Amer Networks C1110-32 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Amer Networks C1110-32, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Amer Networks C1110-32.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Amer Networks C1110-32. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Amer Networks C1110-32 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.