Manuale d’uso / di manutenzione del prodotto GTH-636 del fabbricante Genie
Vai alla pagina of 58
Operator’s Manual with Maintenance Information GTH-636 First Edition Second Printing Part No. 114 104.
SECTION 1 ROUGH TERRAIN FORK LIFT SAFETY SECTION 1-1 Introduction 1-3 S tandards And Symbols 1-4 Safety 1-5 T raining And Knowledge 1-5 Operator's Responsibilities 1-6 Management's Responsib.
SECTION 1 ROUGH TERRAIN FORK LIFT SAFETY 1 - 1.
T ABLE OF CONTENTS SECTION 1 - ROUGH TERRAIN FORK LIFT SAFETY Introduction 1 - 3 Standards And Symbols 1 - 4 Safety 1 - 5 T raining And Knowledge 1 - 5 Operator's Responsibilities 1 - 6 Managemen.
ROUGH TERRAIN FORK LIFT SAFETY INTRODUCTION Owners, Users, and Operators: Genie appreciates your choice of our machine for your application. Our number one priority is user safety , which is best achieved by our joint efforts. W e feel that you make a major contribution to safety if you, as the equipment users and operators: 1.
ROUGH TERRAIN FORK LIFT SAFETY ST ANDARDS AND SYMBOLS 1 - 4 Many aspects of rough terrain forklift operation and testing are discussed in standards published by the American National Standards Institute. These Standards are updated on a regular basis with addendas.
ROUGH TERRAIN FORK LIFT SAFETY SAFETY 1 - 5 1. Safety must always be the operator's most important concern. 2. This machine must only be operated by trained personnel, who have demonstrated their ability to do so safely .
ROUGH TERRAIN FORK LIFT SAFETY OPERA T OR'S RESPONSIBILITIES 1 - 6 1. Read and understand the Operator ’ s Manual. 2. Know the location and the purpose of the controls, instruments and indicator lights. 3. Make sure the machine is in proper order and all operational aids and warning signals are functional before operating.
ROUGH TERRAIN FORK LIFT SAFETY MANAGEMENT'S RESPONSIBILITIES 1 - 7 1. Ensure operators are competent, physically fit, trained and if required licensed.
ROUGH TERRAIN FORK LIFT SAFETY 1 - 8 MAINTENANCE AND REP AIR 1. Practice safe maintenance procedures. Perform all maintenance and repairs in accordance with instructions provided by the manufacturer in the manuals. Also heed the warnings on the placards and decals on the machine.
ROUGH TERRAIN FORK LIFT SAFETY OPERA TION SAFETY 1 - 9 1. Always inspect the machine daily . Check for leaks, worn hoses, loose belts, broken structures, and loose or missing bolts. Repair or replace any worn, damaged or leaking parts prior to operation of the machine.
ROUGH TERRAIN FORK LIFT SAFETY 1 - 10 OPERA TION SAFETY e c n a t s i D h c a o r p p A e f a S m u m i n i M e g a t l o V e n i L r e w o Pe c n a r a e l C d e r i u q e R V k 0 5 o t 0) m 0 0 . 3 ( . t f 0 1 V k 0 0 2 o t 0 5) m 0 6 . 4 ( . t f 5 1 V k 0 5 3 o t 0 0 2) m 0 1 .
ROUGH TERRAIN FORK LIFT SAFETY 1 - 11 OPERA TION SAFETY 17 . Inspect the path of travel before beginning movement. A void holes and dropoffs. 1 8. T raveling on slopes/grades. i . Ascend and descend slowly and with caution. i i . When loaded, always travel with the load uphill.
ROUGH TERRAIN FORK LIFT SAFETY NOTES 1 - 12.
SECTION 2 GENERAL SAFETY 2 - 1.
T ABLE OF CONTENTS SECTION 2 - GENERAL SAFETY General Safety Procedures 2 - 3 Jump Starting 2 - 8 Proper Load Chart Use 2 -9 2 - 2.
GENERAL SAFETY SAFETY ALERT SYMBOL Stop and take time to read ALL safety alert messages. Follow all safety messages to avoid injury and/or death. W ARNING AL W A YS wear eye protection and personal safety equipment. THE OPERA TOR The operator must be fully trained and qualified to operate this machine.
GENERAL SAFETY WELDING PRECAUTIONS CAUTION Any unauthorized welding can cause structural failure or possible personal injury . DO NOT weld on any structural member . All unauthorized welding will void the warranty . HAND HOLDS AND STEPS W ARNING Slips and falls can cause serious injury .
GENERAL SAFETY HYDRAULIC SAFETY W ARNING Hot hydraulic oil can cause severe burns. DO NOT work on the hydraulic system if the oil temperature exceeds 120 degrees F . (49 degrees C). Before ANYONE works on the hydraulic system: 1 . Lower the boom to the horizontal position.
GENERAL SAFETY GENERAL SAFETY PROCEDURES 2 - 6 CAUTION USE SEA T BELT Always wear the seat belt while operating the machine to reduce the risk of personal injury . CAUTION PRACTICE SAFE MAINTENANCE Unauthorized modifications to the machine may impair the safety , machine function and/or af fect machine life.
GENERAL SAFETY A VOID ELECTRICAL POWER LINES DANGER REQUIRED CLEARANCE FOR NORMAL VOL T AGE IN OPERA TION NEAR HIGH VOL T AGE POWER LINES AND OPERA TION IN TRANSIT WITH NO LOAD AND BOOM OR MAST LOWERED. Normal V oltage, kV Minimum Required (Phase to Phase) Clearance, ft.
GENERAL SAFETY Location: The battery is located under the fuel tank / battery box cover (A). JUMP ST ARTING Jump starting at the battery or battery replacement is required when the battery is discharged to the point where the battery will not crank the starter .
GENERAL SAFETY PROPER LOAD CHAR T USE 2 - 9 NEVER raise a load and drive to position it. This can cause the machine to turnover . When placing a load, always move a loaded machine with the boom angle indicator (B) at 0 degrees or less.
GENERAL SAFETY PROPER LOAD CHART USE 2 - 10.
SECTION 3 CONTROLS AND INSTRUMENTS 3 - 1.
T ABLE OF CONTENTS SECTION 3 - CONTROLS AND INSTRUMENTS Operator's Compartment 3 - 3 Joystick Control Functions 3 - 4 Joystick Control Functions (Button Pushed) 3 - 5 Service Brakes 3 - 6 Parking.
CONTROLS AND INSTRUMENTS OPERA T OR'S COMP AR TMENT 3 - 3 1 . Accelerator Pedal 8 . Hourmeter 1 5 . Parking Brake Handle 2 2 . Heater Switch 2 . Joystick 4-way Controller 9 . Gauges 1 6 . Pump Off Button 2 3 . Plug / T urn Signal W ires 3 . Transmission Control Lever 1 0 .
CONTROLS AND INSTRUMENTS JOYSTICK CONTROL FUNCTIONS 3 - 4 A - Boom Down B - Boom Up C - Boom Out D - Boom In E - Boom Down and Out F - Boom Up and In G - Boom Up and Out H - Boom Down and In .
CONTROLS AND INSTRUMENTS JOYSTICK CONTROL FUNCTIONS (BUTTON PUSHED) 3 - 5 A - Tilt Down B - Tilt Back B A.
CONTROLS AND INSTRUMENTS The brake pedal is the operator's control for the service brakes. Pushing the service brake pedal (A) activates the service brakes for all four wheels. The brakes should be applied during normal operation to stop machine movement.
CONTROLS AND INSTRUMENTS SWAY CONTROL C W ARNING Always ensure that the machine level indicator (D) is at zero (0) degrees before raising the boom. Raising the boom with an unlevel machine may cause the machine to overturn, resulting in injury or death.
CONTROLS AND INSTRUMENTS Depressing the pump destroke button while operating the machine will cause an immediate loss of hydraulic power , possibly creating a very dangerous situation. Hydraulic functions that will be affected are: FORK TIL T , LIFT , BOOM EXTEND and RETRACT , P ARKING BRAKE and SW A Y .
CONTROLS AND INSTRUMENTS STEERING In addition to the steering wheel, the machine has another steering control, the steering selector switch. The steering selector switch (B) is a three-position switch. The three positions are: 4-wheel, 2-wheel , and oblique.
CONTROLS AND INSTRUMENTS NOTES 3 - 10.
SECTION 4 OPERA TION 4 - 1.
T ABLE OF CONTENTS SECTION 4 - OPERA TION Operation And Safety Guidelines 4 - 3 Before Starting The Engine 4 - 4 Starting The Engine 4 - 5 Before Operating The Forklift 4 - 7 T ransporting A Load 4 - .
OPERATION OPERATION AND SAFETY GUIDELINES Y our safety and the safety of those around you depends upon you using care and judgement in the operation of this equipment. Know the positions and functions of all controls before attempting to operate this machine.
OPERATION BEFORE ST AR TING THE ENGINE 4 - 4 W ARNING Before starting the engine, be sure that all daily maintenance items have been performed. See Maintenance section. W alk around the machine and check for any parts that are missing, worn, damaged, or leaking.
OPERATION ST A R TING THE ENGINE 4 - 5 DANGER If the machine should start with the transmission control lever (C) in gear , stop operation at once or property damage, serious injury or death may occur . Have a qualified service technician repair the machine.
OPERATION ST A R TING THE ENGINE CAUTION If the engine fails to start within 30 seconds release the key , wait at least 2 minutes to allow the starter motor to cool before trying again. If the engine fails to start after four attempts, trouble shoot and correct the problem.
OPERATION PUMP OFF BRAKE ON CONTROL SWAY HEATER HEADLIGHT HYDRAULICS WIPER AUXILI ARY LEFT STABILIZER RIGHT STABILIZER BEFORE OPERA TING THE FORKLIFT CAUTION If any gauge reading does not fall within the set tolerances the machine must be repaired before operation.
OPERATION BEFORE OPERA TING THE FORKLIFT 4 - 8 SWAY CONTROL Operate the frame sway control (A) momentarily right and left. Check the steering operation by turning the steering wheel (B) approximately 1/4 turn in each direction.
OPERATION BRAKE ON SWAY CONTROL HEATE R HEADLIGH T LICS RY PUMP OFF BEFORE OPERA TING THE FORKLIFT 4 - 9 DANGER Any problems with the service brakes or the parking brake found while conducting the daily inspection should be corrected immediately . Failure to do so could result in injury or death.
OPERATION BEFORE OPERA TING THE FORKLIFT 4 - 10 DANGER Never operate the machine with a faulty backup alarm. Doing so may result in serious injury or death. Place the transmission control lever (A) in reverse. The backup alarm should sound. If it does not sound, have the backup alarm repaired immediately .
OPERATION TRANSPORTING A LOAD W ARNING W ARNING 4 - 11 Transporting a load with the boom extended and the boom angle indicator arrow (D) reading more than 0 degrees could cause a roll over hazard. The load should be kept as low to the ground as possible while traveling.
OPERATION TRANSPORTING A LOAD 4 - 12 W ARNING Slower speeds should be used whenever transporting a load. Always bring the machine to a complete stop before reversing the transmission control lever (A). Failure to do so can result in damage to the load, the machine and/or bystanders.
OPERATION PLACING A LOAD 4 - 13 W ARNING Do not sway the machine with the boom angle indicator arrow (B) at more than 0 degrees. By doing so you could cause a roll over hazard which may result in injury or death. DANGER Always apply the parking brake (C) before lifting and/or placing a load.
OPERATION PLACING A LOAD DANGER Traveling with a reading of more than 0 degress on the boom angle indicator arrow (A) may cause a rollover hazard. Gradually move the 4-way controller towards the letter (B) to lift the load vertically . Hold the controller back until the required height has been achieved.
SECTION 5 MAINTENANCE PROCEDURES 5 - 1.
T ABLE OF CONTENTS SECTION 5 - MAINTENANCE PROCEDURES General Safety Practices 5 - 3 Daily Maintenance 5 - 5 5 - 2.
MAINTENANCE PROCEDURES BEFORE SERVICING Read the entire Maintenance Procedure Section. Familiarize yourself with all the safety precautions listed in Sections 1 & 2. Pay close attention to all the safety alert symbols. Be sure you understand the procedures detailed in this section.
MAINTENANCE PROCEDURES GENERAL SAFETY PRACTICES HYDRAULIC SAFETY W ARNING Hot hydraulic oil can cause severe burns. DO NOT work on the hydraulic system if the oil system temperature exceeds 120 degrees F . (49 degrees C.) Before ANYONE works on the hydraulic system: 1 .
MAINTENANCE PROCEDURES DAIL Y MAINTENANCE 5 - 5 SCHEDULED MAINTENANCE Maintenace performed quarterly , annually and every two years must be completed by a person trained and qualified to perform maintenance on this machine according to the procedures found in the service manual for this machine.
MAINTENANCE PROCEDURES CHECK TIRE FOR PROPER INFLA TION Location: Wheel ends. T o Check: W ith the valve stem (C) positioned to the top of the tire, check the tire pressure with the tire cold and a properly functioning air pressure gauge. Setting: 50 PSI.
SECTION 6 MA TERIAL SAFETY DA T A 6 - 1.
T ABLE OF CONTENTS SECTION 6 - MA TERIAL SAFETY DA T A Material Safety Data Sheets 6 - 3 California Proposition 65 W arnings 6 - 4 6 - 2.
MA TERIAL SAFETY DA T A 6 - 3 The Federal Occupational, Safety and Health Administration (OSHA) Standard 29 ctr 1910.1200, and in some cases state and local Right-T o-Know laws, may require specific MSDS be available to employees prior to operating this equipment.
MA TERIAL SAFETY DA T A 6 - 4 The following warnings are required on all off road equipment operating in the State of California. If you are operating a Genie in the State of California and do not see the approved warning labels, please contact us for a replacement at no charge.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Genie GTH-636 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Genie GTH-636 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Genie GTH-636 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Genie GTH-636 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Genie GTH-636, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Genie GTH-636.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Genie GTH-636. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Genie GTH-636 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
