Manuale d’uso / di manutenzione del prodotto EXT-HDMI-CAT5-844 del fabbricante Gefen
Vai alla pagina of 28
www.gefen.com www. g efen.com 8x4 CAT-5 Matrix for EXT-HDMI-CAT5-844 User Manual.
T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday . Write T o: Gefen Inc. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 9131 1 www .gefen.com support@gefen.
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Panel Layout 5 Sender Panel Descriptions 7 Connecting And Operating The 8x4 CA T -5 Matrix for HDMI 8 Connecting The 8x4 CA T -5 Matrix fo.
1 Congratulations on your purchase of the 8x4 CA T -5 Matrix for HDMI. Y our complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies.
READ THESE NOTES BEFORE INST ALLING OR OPERA TING THE 8X4 CA T -5 MA TRIX FOR HDMI • T o use the extender functionality of the 8x4 CA T -5 Matrix for HDMI the supplied 1 foot HDMI jumper cables must be used to connect the HDMI output ports to the HDMI extension input ports.
3 Features • Switches any eight HDMI™ sources to 4 Displays • Distributes any of the four switched inputs (total of eight inputs) to any combination of the four HDMI™ output displays • Maint.
4 Front Panel Back Panel 1 10 11 12 23 4 13 5 8 6 79 SENDER P ANEL LA YOUT.
5 1 HDMI Outputs 1 - 4 The selected source for each HDMI output will be indicated by an active LED. The LED array will behave dif ferently depending on the selected input (A or B).
6 SENDER P ANEL DESCRIPTIONS 12 HDMI Outputs 1 - 4 Each output port can be used in one of either two ways. This output can be connected directly to a local HDMI capable display or , if using the built- in extension functionality , these outputs can be connected to the HDMI extension input ports using the supplied 1 foot HDMI jumper cables.
7 How to Connect the 8x4 CA T -5 Matrix for HDMI 1. Connect up to 8 HDMI source devices to the 8x4 CA T -5 Matrix for HDMI using the included HDMI cables. NOTE: Please be aware that each input has two available HDMI ports and that only one will be active at any given time.
8 CONNECTING THE 8X4 CA T -5 MA TRIX FOR HDMI JUMPERS The 8x4 CA T -5 Matrix for HDMI uses a jumper cable system to link the matrix and extension portions together . These jumper cables are included. Please us the diagram below to setup extension functionality of the 8x4 CA T -5 Matrix for HDMI.
9 RMT -16IR* REMOTE CONTROL DESCRIPTION The RMT -16IR remote control will allow the user to select which source will be routed to which output. Each of the 4 outputs are assigned a group of 4 buttons that will correspond to the 4 source inputs.
10 RMT -16IR REMOTE CHANNEL CONFIGURA TION Why would I need to change the remote channel? In some instances, the 8x4 CA T -5 Matrix for HDMI may use IR codes that con fl ict with other IR remote control devices.
11 EDID MANAGEMENT FEA TURE EDID. What is it and what is it used for? Under normal circumstances, a source device (digital and analog) will require information about a connected device/display to assess what resolutions and features are available.
12 EDID MANAGEMENT OPTIONS EDID Modes The diagram below illustrates the 8 DIP switch bank. DIP SWITCH Function 1 EDID Mode 2 EDID Mode 3 IR Channel 4 IR Channel 5 EDID Mode 6 N/A 7 EDID Mode 8 N/A Use DIP switches 1, 2, 5, and 7 to select the desired EDID management mode.
13 LED ARRA Y DESCRIPTION The LED array on the 8x4 CA T -5 Matrix for HDMI is designed to inform the user of the current source to output routes. Each output has a 4 LED array that will indicate which source is currently selected.
14 8X4 CA T -5 MA TRIX FOR HDMI RS-232 SERIAL COMMUNICA TION What features are available via the RS-232 serial communications port? The 8x4 CA T -5 Matrix for HDMI can accept commands through the RS-232 serial communications port located on the rear panel.
15 8X4 CA T -5 MA TRIX FOR HDMI RS-232 COMMANDS Switching/Routing Binary T able ASCII Command Input Output ASCII Command Input Output A1 or a1 1A 1 C1 or c1 1A 3 A2 or a2 1B 1 C2 or c2 1B 3 A3 or a3 2.
16 Front Panel Back Panel T op Panel 6 10 3 1 57 8 9 24 RECEIVER P ANEL LA YOUT.
17 1 IR Relay Receiver This receiver will receive commands from the included IR remote control and from other commercial IR remote controls and relay it back to the optional IR blaster . This is intended for remote control of devices connected to the 8x4 CA T -5 Matrix for HDMI from the extended location.
18 OPERA TING THE HDMI OVER CA T -5 RECEIVER T o use the HDMI Over CA T5 Receiver , the following connections must be made: 1. A HDMI jumper cable is connected between the HDMI output port and the HDMI extension input port.
19 RMT -4IR REMOTE CONTROL DESCRIPTION Pressing on each numbered selection buttons will switch the receiver to the corresponding HDMI Input source. Each input can have up to 2 sources connected (A and B). Each press of a input button will toggle between the A and B source.
20 HDMI OVER CA T -5 RECEIVER ADV ANCED CONFIGURA TION The HDMI Over CA T5 Receiver contains a bank of 8 DIP SWITCHES. These swiches are located underneath each unit. Peeling back the black metallic sticker on the bottom of the HDMI Over CA T5 Receiver will reveal the DIP SWITCH bank.
21 HDMI OVER CA T -5 RECEIVER ADV ANCED CONFIGURA TION 1. Insert a small fl at head tool into the trim pot on the receiver unit. 2. T urn the trim pot in a clockwise fashion until it comes to a stop. Do not force the trim pot beyond this point. Doing so may break the trim pot.
22 LED ARRA Y DESCRIPTION The LED array on the HDMI Over CA T5 Receiver is designed to inform the user of the currently selected source. Each receiver unit has a 4 LED array that will indicate which source is currently selected.
23 HDMI OVER CA T -5 RECEIVER RS-232 SERIAL COMMUNICA TIONS What features are available via the RS-232 serial communications port? The HDMI Over CA T5 Receiver can accept commands through the RS-232 serial communications port located on the rear panel.
24 HDMI OVER CA T -5 RECEIVER RS-232 COMMANDS Switching/Routing Binary T able ASCII Command Input 11 A 21 B 32 A 42 B 53 A 63 B 74 A 84 B Boost Settings DIP switches 4 and 5 on the underside of the unit must be in their default OFF position for the following commands to work.
25 Video Ampli fi er Bandwidth ....................................................................... 165 MHz Input Video Signal .............................................................................. 1.2 volts p-p Input DDC Signal ..........
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Gefen EXT-HDMI-CAT5-844 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Gefen EXT-HDMI-CAT5-844 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Gefen EXT-HDMI-CAT5-844 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Gefen EXT-HDMI-CAT5-844 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Gefen EXT-HDMI-CAT5-844, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Gefen EXT-HDMI-CAT5-844.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Gefen EXT-HDMI-CAT5-844. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Gefen EXT-HDMI-CAT5-844 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.