


CONTENTS Connecting Your Mouse 1 Installing the iWheelworks Software 1 Customizing Your Buttons 2 Customizing Your Own Command Menus 3 Customizing Your Scroll Wheels 4 Troubleshooting 5 Warranty 6 Instrucciones en Español 7

INSTALLING YOUR iWHEELWORKSSOFTWARE In order to take full advantage of your mouse, you must install the enclosed software. While your input device will work as a basic mouse once it is plugged in, the software must be loaded for the programmable third key to work. To install from Windows® 95/98/Me/NT/2000: 1.Insert the Mouse SETUP DISK into your floppy disk drive. 2.Click the Start button and then click Run. 3.Now type :\setup. For example, if the Mouse SETUP DISK in is drive A, type a:\setup. 4.Now click OK Follow the on-screen instructions. Note: If you do not restart your computer, the software will not operate. 5.Once restarted, the mouse icon 8 should appear in the Windows® system tray. Double click the icon to bring up your mouse control panel.

From the mouse control panel, you can customize your mouse to meet your indi- vidual needs! Just click on the appropriate tab to adjust settings:
Button Pointers Motion Wheel Settings
Customizing Your Buttons - click on the Button tab:

Customizing Your Own Command Menus - click on Settings tab:

Customizing Your Scroll Wheels - click the Wheel tab:
Your Scroll Wheels are preprogrammed as follows:
Customizing Your Scroll Wheels:

Problem: No Mouse Movement Possible Cause: Make sure the mouse is securely plugged into the appropriate port: USB or PS/2 mouse port. Make sure you have installed the software that came with our mouse or the standard Microsoft® mouse drivers included with your Windows® operating system. Shut down and restart your computer.
Problem: The cursor on the screen stays in one spot or moves erratically. Possible Cause: Check the mouse cable for any sharp twists or breaks, espe- cially where it connects to the mouse. Straighten if necessary.
Problem: Mouse movement does not produce corresponding cursor movement or there is a brief pause during movement. Possible Cause: Clean the mouse ball: Remove the bottom cover. Use a pre- moistened cleaning wipe to clean the ball and a lint free cloth to dry. Also, clean out the ball cage with a premoistened cleaning swab. Allow to dry and then reassemble the mouse.
Problem: Programmable Functions will not work after installing the software. Possible Cause: Make sure your mouse is properly connected. Make sure there are not other driver conflicts as follows:

90 DAY LIMITED WARRANTY Jasco Products Company warrants this product to be free from manufacturing defects for a period of ninety days from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit. This warranty is in lieu of all other warranties express or implied. Some states do not allow limitations on how long an implied warranty lasts or permit the exclusion or limitation of incidental or consequen- tial damages, so the above limitations may not apply to you. This warranty gives you specific rights, and you may also have other rights which vary from state to state. If unit should prove defective within the warranty period, return prepaid with dated proof of purchase to:
311 N.W. 122nd Oklahoma City, OK. 73114
Jasco Products Company
I possessori del prodotto e il nostro team di solito rispondono entro 24 ore, e la tua domanda sarà utile anche ad altri.
Invia la prima domanda: risponderanno altri possessori o il nostro team.